niansa-misc/linux
1
0
Fork 0
mirror of synced 2025-03-06 20:59:54 +01:00
Code Issues Projects Releases Packages Wiki Activity

serial: imx: Fill in rs485_supported

Browse source 
Add information on supported serial_rs485 features.

In the case where RTS is lacking, RS485 cannot be enabled so provide
zero rs485_supported for that case. Perhaps it would make sense to not
provide rs485_config() at all in that case but such a change would have
userspace visible impact/change in behavior so this patch does not
attempt it.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220606100433.13793-17-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ilpo Järvinen 2022-06-06 13:04:13 +03:00 • committed by Greg Kroah-Hartman
parent 07481f448b
commit 00d7a00e2a
1 changed files with 13 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

13
drivers/tty/serial/imx.c
View file

@ -2200,6 +2200,14 @@ static enum hrtimer_restart imx_trigger_stop_tx(struct hrtimer *t)
return HRTIMER_NORESTART; return HRTIMER_NORESTART;
} }
static const struct serial_rs485 imx_no_rs485 = {}; /* No RS485 if no RTS */
static const struct serial_rs485 imx_rs485_supported = {
.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND |
SER_RS485_RX_DURING_TX,
.delay_rts_before_send = 1,
.delay_rts_after_send = 1,
};
/* Default RX DMA buffer configuration */ /* Default RX DMA buffer configuration */
#define RX_DMA_PERIODS 16 #define RX_DMA_PERIODS 16
#define RX_DMA_PERIOD_LEN (PAGE_SIZE / 4) #define RX_DMA_PERIOD_LEN (PAGE_SIZE / 4)
@ -2279,6 +2287,11 @@ static int imx_uart_probe(struct platform_device *pdev)
sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE); sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE);
sport->port.ops = &imx_uart_pops; sport->port.ops = &imx_uart_pops;
sport->port.rs485_config = imx_uart_rs485_config; sport->port.rs485_config = imx_uart_rs485_config;
/* RTS is required to control the RS485 transmitter */
if (sport->have_rtscts || sport->have_rtsgpio)
sport->port.rs485_supported = &imx_rs485_supported;
else
sport->port.rs485_supported = &imx_no_rs485;
sport->port.flags = UPF_BOOT_AUTOCONF; sport->port.flags = UPF_BOOT_AUTOCONF;
timer_setup(&sport->timer, imx_uart_timeout, 0); timer_setup(&sport->timer, imx_uart_timeout, 0);