ALSA: hda/cirrus: Correct the full scale volume set logic
This patch corrects the full-scale volume setting logic. On certain
platforms, the full-scale volume bit is required. The current logic
mistakenly sets this bit and incorrectly clears reserved bit 0, causing
the headphone output to be muted.
Fixes: 342b6b610a
("ALSA: hda/cs8409: Fix Full Scale Volume setting for all variants")
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20250214210736.30814-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
parent
362ff1e7c6
commit
08b613b9e2
3 changed files with 17 additions and 14 deletions
|
@ -121,7 +121,7 @@ static const struct cs8409_i2c_param cs42l42_init_reg_seq[] = {
|
|||
{ CS42L42_MIXER_CHA_VOL, 0x3F },
|
||||
{ CS42L42_MIXER_CHB_VOL, 0x3F },
|
||||
{ CS42L42_MIXER_ADC_VOL, 0x3f },
|
||||
{ CS42L42_HP_CTL, 0x03 },
|
||||
{ CS42L42_HP_CTL, 0x0D },
|
||||
{ CS42L42_MIC_DET_CTL1, 0xB6 },
|
||||
{ CS42L42_TIPSENSE_CTL, 0xC2 },
|
||||
{ CS42L42_HS_CLAMP_DISABLE, 0x01 },
|
||||
|
@ -315,7 +315,7 @@ static const struct cs8409_i2c_param dolphin_c0_init_reg_seq[] = {
|
|||
{ CS42L42_ASP_TX_SZ_EN, 0x01 },
|
||||
{ CS42L42_PWR_CTL1, 0x0A },
|
||||
{ CS42L42_PWR_CTL2, 0x84 },
|
||||
{ CS42L42_HP_CTL, 0x03 },
|
||||
{ CS42L42_HP_CTL, 0x0D },
|
||||
{ CS42L42_MIXER_CHA_VOL, 0x3F },
|
||||
{ CS42L42_MIXER_CHB_VOL, 0x3F },
|
||||
{ CS42L42_MIXER_ADC_VOL, 0x3f },
|
||||
|
@ -371,7 +371,7 @@ static const struct cs8409_i2c_param dolphin_c1_init_reg_seq[] = {
|
|||
{ CS42L42_ASP_TX_SZ_EN, 0x00 },
|
||||
{ CS42L42_PWR_CTL1, 0x0E },
|
||||
{ CS42L42_PWR_CTL2, 0x84 },
|
||||
{ CS42L42_HP_CTL, 0x01 },
|
||||
{ CS42L42_HP_CTL, 0x0D },
|
||||
{ CS42L42_MIXER_CHA_VOL, 0x3F },
|
||||
{ CS42L42_MIXER_CHB_VOL, 0x3F },
|
||||
{ CS42L42_MIXER_ADC_VOL, 0x3f },
|
||||
|
|
|
@ -876,7 +876,7 @@ static void cs42l42_resume(struct sub_codec *cs42l42)
|
|||
{ CS42L42_DET_INT_STATUS2, 0x00 },
|
||||
{ CS42L42_TSRS_PLUG_STATUS, 0x00 },
|
||||
};
|
||||
int fsv_old, fsv_new;
|
||||
unsigned int fsv;
|
||||
|
||||
/* Bring CS42L42 out of Reset */
|
||||
spec->gpio_data = snd_hda_codec_read(codec, CS8409_PIN_AFG, 0, AC_VERB_GET_GPIO_DATA, 0);
|
||||
|
@ -893,13 +893,15 @@ static void cs42l42_resume(struct sub_codec *cs42l42)
|
|||
/* Clear interrupts, by reading interrupt status registers */
|
||||
cs8409_i2c_bulk_read(cs42l42, irq_regs, ARRAY_SIZE(irq_regs));
|
||||
|
||||
fsv_old = cs8409_i2c_read(cs42l42, CS42L42_HP_CTL);
|
||||
if (cs42l42->full_scale_vol == CS42L42_FULL_SCALE_VOL_0DB)
|
||||
fsv_new = fsv_old & ~CS42L42_FULL_SCALE_VOL_MASK;
|
||||
else
|
||||
fsv_new = fsv_old & CS42L42_FULL_SCALE_VOL_MASK;
|
||||
if (fsv_new != fsv_old)
|
||||
cs8409_i2c_write(cs42l42, CS42L42_HP_CTL, fsv_new);
|
||||
fsv = cs8409_i2c_read(cs42l42, CS42L42_HP_CTL);
|
||||
if (cs42l42->full_scale_vol) {
|
||||
// Set the full scale volume bit
|
||||
fsv |= CS42L42_FULL_SCALE_VOL_MASK;
|
||||
cs8409_i2c_write(cs42l42, CS42L42_HP_CTL, fsv);
|
||||
}
|
||||
// Unmute analog channels A and B
|
||||
fsv = (fsv & ~CS42L42_ANA_MUTE_AB);
|
||||
cs8409_i2c_write(cs42l42, CS42L42_HP_CTL, fsv);
|
||||
|
||||
/* we have to explicitly allow unsol event handling even during the
|
||||
* resume phase so that the jack event is processed properly
|
||||
|
@ -920,7 +922,7 @@ static void cs42l42_suspend(struct sub_codec *cs42l42)
|
|||
{ CS42L42_MIXER_CHA_VOL, 0x3F },
|
||||
{ CS42L42_MIXER_ADC_VOL, 0x3F },
|
||||
{ CS42L42_MIXER_CHB_VOL, 0x3F },
|
||||
{ CS42L42_HP_CTL, 0x0F },
|
||||
{ CS42L42_HP_CTL, 0x0D },
|
||||
{ CS42L42_ASP_RX_DAI0_EN, 0x00 },
|
||||
{ CS42L42_ASP_CLK_CFG, 0x00 },
|
||||
{ CS42L42_PWR_CTL1, 0xFE },
|
||||
|
|
|
@ -230,9 +230,10 @@ enum cs8409_coefficient_index_registers {
|
|||
#define CS42L42_PDN_TIMEOUT_US (250000)
|
||||
#define CS42L42_PDN_SLEEP_US (2000)
|
||||
#define CS42L42_INIT_TIMEOUT_MS (45)
|
||||
#define CS42L42_ANA_MUTE_AB (0x0C)
|
||||
#define CS42L42_FULL_SCALE_VOL_MASK (2)
|
||||
#define CS42L42_FULL_SCALE_VOL_0DB (1)
|
||||
#define CS42L42_FULL_SCALE_VOL_MINUS6DB (0)
|
||||
#define CS42L42_FULL_SCALE_VOL_0DB (0)
|
||||
#define CS42L42_FULL_SCALE_VOL_MINUS6DB (1)
|
||||
|
||||
/* Dell BULLSEYE / WARLOCK / CYBORG Specific Definitions */
|
||||
|
||||
|
|
Loading…
Add table
Reference in a new issue