niansa-misc/linux
1
0
Fork 0
mirror of synced 2025-03-06 20:59:54 +01:00
Code Issues Projects Releases Packages Wiki Activity

ARM: dts: bcm2711: Add reset controller to xHCI node

Browse source 
The chip is hardwired to the board's PCIe bus and needs to be properly
setup trough a firmware routine after a PCI fundamental reset. Pass the
reset controller phandle that takes care of triggering the
initialization to the relevant PCI device.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629161845.6021-5-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Nicolas Saenz Julienne 2020-06-29 18:18:40 +02:00 • committed by Greg Kroah-Hartman
parent b03300db06
commit 258f92d2f8
1 changed files with 17 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

17
arch/arm/boot/dts/bcm2711-rpi-4-b.dts
View file

@ -4,6 +4,8 @@
#include "bcm2835-rpi.dtsi" #include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-usb-peripheral.dtsi" #include "bcm283x-rpi-usb-peripheral.dtsi"
#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
/ { / {
compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
model = "Raspberry Pi 4 Model B"; model = "Raspberry Pi 4 Model B";
@ -212,6 +214,21 @@
}; };
}; };
&pcie0 {
pci@1,0 {
#address-cells = <3>;
#size-cells = <2>;
ranges;
reg = <0 0 0 0 0>;
usb@1,0 {
reg = <0x10000 0 0 0 0>;
resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
};
};
};
/* uart0 communicates with the BT module */ /* uart0 communicates with the BT module */
&uart0 { &uart0 {
pinctrl-names = "default"; pinctrl-names = "default";