From 2a254de29e995ea58d73f75b69016cf913a5447d Mon Sep 17 00:00:00 2001
From: Alexander Monakov <amonakov@ispras.ru>
Date: Fri, 9 Mar 2018 01:53:02 +0300
Subject: [PATCH] regulator: 88pg86x: add DT bindings document
The only device-specific node names are "buck1" and "buck2" for the two
regulators present on the device. Sleep mode GPIO and per-regulator GPIO
enable pins are not exposed (the driver does not support them either).
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/regulator/88pg86x.txt | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/88pg86x.txt
diff --git a/Documentation/devicetree/bindings/regulator/88pg86x.txt b/Documentation/devicetree/bindings/regulator/88pg86x.txt
new file mode 100644
index 000000000000..13b7f49a2ea8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/88pg86x.txt
@@ -0,0 +1,22 @@
+Marvell 88PG867/88PG868 voltage regulators
+
+Required properties:
+- compatible: one of "marvell,88pg867", "marvell,88pg868";
+- reg: I2C slave address.
+
+Optional subnodes for regulators: "buck1", "buck2", using common regulator
+bindings given in <Documentation/devicetree/bindings/regulator/regulator.txt>.
+
+Example:
+
+ pg868@19 {
+ compatible = "marvell,88pg868";
+ reg = <0x19>;
+
+ vcpu: buck1 {
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1350000>;
+ };
+ };