arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS
The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise identical to OrangePi R1 Plus. Signed-off-by: Tianling Shen <cnsztl@gmail.com> Link: https://lore.kernel.org/r/20230325074022.9818-5-cnsztl@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
parent
564cfdb866
commit
387b3bbac5
2 changed files with 41 additions and 0 deletions
|
@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
|
||||||
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
|
||||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
|
||||||
|
|
40
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
Normal file
40
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
Normal file
|
@ -0,0 +1,40 @@
|
||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2016 Xunlong Software. Co., Ltd.
|
||||||
|
* (http://www.orangepi.org)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
#include "rk3328-orangepi-r1-plus.dts"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "Xunlong Orange Pi R1 Plus LTS";
|
||||||
|
compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328";
|
||||||
|
};
|
||||||
|
|
||||||
|
&gmac2io {
|
||||||
|
phy-handle = <&yt8531c>;
|
||||||
|
tx_delay = <0x19>;
|
||||||
|
rx_delay = <0x05>;
|
||||||
|
|
||||||
|
mdio {
|
||||||
|
/delete-node/ ethernet-phy@1;
|
||||||
|
|
||||||
|
yt8531c: ethernet-phy@0 {
|
||||||
|
compatible = "ethernet-phy-ieee802.3-c22";
|
||||||
|
reg = <0>;
|
||||||
|
|
||||||
|
motorcomm,clk-out-frequency-hz = <125000000>;
|
||||||
|
motorcomm,keep-pll-enabled;
|
||||||
|
motorcomm,auto-sleep-disabled;
|
||||||
|
|
||||||
|
pinctrl-0 = <ð_phy_reset_pin>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
reset-assert-us = <15000>;
|
||||||
|
reset-deassert-us = <50000>;
|
||||||
|
reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
Loading…
Add table
Reference in a new issue