arm64: dts: rockchip: Add support for rk3588 based Cool Pi CM5 GenBook
Cool Pi CM5 GenBook works as a carrier board connect with CM5 [0]. Specification: - Rockchip RK3588 - LPDDR5X 8/32 GB - eMMC 64 GB - HDMI Type A out x 1 - USB 3.0 Host x 1 - USB-C 3.0 with DisplayPort AltMode - PCIE M.2 E Key for RTL8852BE Wireless connection - PCIE M.2 M Key for NVME connection - eDP panel with 1920x1080 This patch add basic support to bringup eMMC/USB HOST/WiFi/TouchPad/ Battery/PCIE NVME, and can also drive a HDMI output with out of tree hdmi patches. [0] https://www.crowdsupply.com/shenzhen-tianmao-technology-co-ltd/genbook-rk3588 Signed-off-by: Andy Yan <andyshrk@163.com> Link: https://lore.kernel.org/r/20240730102433.540260-3-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Andy Yan
Heiko Stuebner
parent
db0d831c58
commit
4a8c1161b8
2 changed files with 350 additions and 0 deletions
|
|
@ -122,6 +122,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-genbook.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtbo
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
|
||||
|
|
|
|||
349
arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
Normal file
349
arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
Normal file
|
|
@ -0,0 +1,349 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2024 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "rk3588-coolpi-cm5.dtsi"
|
||||
|
||||
/ {
|
||||
model = "CoolPi CM5 GenBook";
|
||||
compatible = "coolpi,pi-cm5-genbook", "coolpi,pi-cm5", "rockchip,rk3588";
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bl_en>;
|
||||
power-supply = <&vcc12v_dcin>;
|
||||
pwms = <&pwm6 0 25000 0>;
|
||||
};
|
||||
|
||||
battery: battery {
|
||||
compatible = "simple-battery";
|
||||
charge-full-design-microamp-hours = <9800000>;
|
||||
voltage-max-design-microvolt = <4350000>;
|
||||
voltage-min-design-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
charger: dc-charger {
|
||||
compatible = "gpio-charger";
|
||||
charger-type = "mains";
|
||||
gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
heartbeat_led: led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
wlan_led: led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WLAN;
|
||||
gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
charging_red: led-2 {
|
||||
function = LED_FUNCTION_CHARGING;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <7000000>;
|
||||
regulator-max-microvolt = <7000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <7000000>;
|
||||
regulator-max-microvolt = <7000000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_lcd: vcc3v3-lcd-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_lcd";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcdpwr_en>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0-usb-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_pwren>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_host0: vcc5v0_usb30_host: vcc5v0-usb-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_host_pwren>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4m3_xfer>;
|
||||
|
||||
cw2015@62 {
|
||||
compatible = "cellwise,cw2015";
|
||||
reg = <0x62>;
|
||||
|
||||
cellwise,battery-profile = /bits/ 8 <
|
||||
0x17 0x67 0x69 0x63 0x63 0x62 0x62 0x5F
|
||||
0x52 0x73 0x4C 0x5A 0x5B 0x4B 0x42 0x3A
|
||||
0x33 0x2D 0x29 0x28 0x2E 0x31 0x3C 0x49
|
||||
0x2C 0x2C 0x0C 0xCD 0x30 0x51 0x50 0x66
|
||||
0x74 0x74 0x75 0x78 0x41 0x1B 0x84 0x5F
|
||||
0x0B 0x34 0x1C 0x45 0x89 0x92 0xA0 0x13
|
||||
0x2C 0x55 0xAB 0xCB 0x80 0x5E 0x7B 0xCB
|
||||
0x2F 0x00 0x64 0xA5 0xB5 0x10 0x18 0x21
|
||||
>;
|
||||
|
||||
cellwise,monitor-interval-ms = <3000>;
|
||||
monitored-battery = <&battery>;
|
||||
power-supplies = <&charger>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5m3_xfer>;
|
||||
|
||||
touchpad: touchpad@2c {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x2c>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
|
||||
hid-descr-addr = <0x0020>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* M.2 E-Key */
|
||||
&pcie2x1l0 {
|
||||
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_sys>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1l2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* M.2 M-Key ssd */
|
||||
&pcie3x4 {
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_sys>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
lcd {
|
||||
lcdpwr_en: lcdpwr-en {
|
||||
rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
bl_en: bl-en {
|
||||
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
usb_pwren: usb-pwren {
|
||||
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
usb_otg_pwren: usb-otg-pwren {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
usb_host_pwren: usb-host-pwren {
|
||||
rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
bt_pwron: bt-pwron {
|
||||
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
pcie_clkreq: pcie-clkreq {
|
||||
rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
pcie_rst: pcie-rst {
|
||||
rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
wifi_pwron: wifi-pwron {
|
||||
rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
pcie_wake: pcie-wake {
|
||||
rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm6 {
|
||||
pinctrl-0 = <&pwm6m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fspim2_pins>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <100000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
phy-supply = <&vcc5v0_usb_host0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
phy-supply = <&vcc5v0_usb>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* For Keypad */
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Type C port */
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "peripheral";
|
||||
maximum-speed = "high-speed";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to a HUB for camera and BT */
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* USB A out */
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Add table
Reference in a new issue