drm/msm/dp: incorporate pm_runtime framework into DP driver
Currently DP driver is executed independent of PM runtime framework. This leads msm eDP panel can not being detected by edp_panel driver during generic_edp_panel_probe() due to AUX DPCD read failed at edp panel driver. Incorporate PM runtime framework into DP driver so that host controller's power and clocks are enable/disable through PM runtime mechanism. Once PM runtime framework is incorporated into DP driver, waking up device from power up path is not necessary. Hence remove it. After incorporating pm_runtime framework into eDP/DP driver, dp_pm_suspend() to handle power off both DP phy and controller during suspend and dp_pm_resume() to handle power on both DP phy and controller during resume are not necessary. Therefore both dp_pm_suspend() and dp_pm_resume() are dropped and replace with dp_pm_runtime_suspend() and dp_pm_runtime_resume() respectively. Changes in v9: -- silent compiler warning message at dp_power_init() and dp_power_deinit() with W1 flag Changes in v7: -- add comments to dp_pm_runtime_resume() -- add comments to dp_bridge_hpd_enable() -- delete dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_notify() Changes in v6: -- delete dp_power_client_deinit(dp->power); -- remove if (!dp->dp_display.is_edp) condition checkout at plug_handle() -- remove if (!dp->dp_display.is_edp) condition checkout at unplug_handle() -- add IRQF_NO_AUTOEN to devm_request_irq() -- add enable_irq() and disable_irq() to pm_runtime_resume()/suspend() -- del dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_disable() Changes in v5: -- remove pm_runtime_put_autosuspend feature, use pm_runtime_put_sync() -- squash add pm_runtime_force_suspend()/resume() patch into this patch Changes in v4: -- reworded commit text to explain why pm_framework is required for edp panel -- reworded commit text to explain autosuspend is choiced -- delete EV_POWER_PM_GET and PM_EV_POWER_PUT from changes #3 -- delete dp_display_pm_get() and dp_display_pm_Put() from changes #3 -- return value from pm_runtime_resume_and_get() directly -- check return value of devm_pm_runtime_enable() -- delete pm_runtime_xxx from dp_display_remove() -- drop dp_display_host_init() from EV_HPD_INIT_SETUP -- drop both dp_pm_prepare() and dp_pm_compete() from this change -- delete ST_SUSPENDED state -- rewording commit text to add more details regrading the purpose of this change Changes in v3: -- incorporate removing pm_runtime_xx() from dp_pwer.c to this patch -- use pm_runtime_resume_and_get() instead of pm_runtime_get() -- error checking pm_runtime_resume_and_get() return value -- add EV_POWER_PM_GET and PM_EV_POWER_PUT to handle HPD_GPIO case -- replace dp_pm_suspend() with pm_runtime_force_suspend() -- replace dp_pm_resume() with pm_runtime_force_resume() Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/570073/ Link: https://lore.kernel.org/r/1701472789-25951-6-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This commit is contained in:
parent
9179fd9596
commit
5814b8bf08
4 changed files with 77 additions and 152 deletions
|
@ -291,6 +291,10 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = pm_runtime_resume_and_get(dp_aux->dev);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
mutex_lock(&aux->mutex);
|
||||
if (!aux->initted) {
|
||||
ret = -EIO;
|
||||
|
@ -364,6 +368,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
|
|||
|
||||
exit:
|
||||
mutex_unlock(&aux->mutex);
|
||||
pm_runtime_put_sync(dp_aux->dev);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
|
|
@ -49,7 +49,6 @@ enum {
|
|||
ST_CONNECTED,
|
||||
ST_DISCONNECT_PENDING,
|
||||
ST_DISPLAY_OFF,
|
||||
ST_SUSPENDED,
|
||||
};
|
||||
|
||||
enum {
|
||||
|
@ -309,10 +308,6 @@ static void dp_display_unbind(struct device *dev, struct device *master,
|
|||
struct dp_display_private *dp = dev_get_dp_display_private(dev);
|
||||
struct msm_drm_private *priv = dev_get_drvdata(master);
|
||||
|
||||
/* disable all HPD interrupts */
|
||||
if (dp->core_initialized)
|
||||
dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false);
|
||||
|
||||
kthread_stop(dp->ev_tsk);
|
||||
|
||||
of_dp_aux_depopulate_bus(dp->aux);
|
||||
|
@ -542,6 +537,7 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
|
|||
{
|
||||
u32 state;
|
||||
int ret;
|
||||
struct platform_device *pdev = dp->dp_display.pdev;
|
||||
|
||||
mutex_lock(&dp->event_mutex);
|
||||
|
||||
|
@ -549,7 +545,7 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
|
|||
drm_dbg_dp(dp->drm_dev, "Before, type=%d hpd_state=%d\n",
|
||||
dp->dp_display.connector_type, state);
|
||||
|
||||
if (state == ST_DISPLAY_OFF || state == ST_SUSPENDED) {
|
||||
if (state == ST_DISPLAY_OFF) {
|
||||
mutex_unlock(&dp->event_mutex);
|
||||
return 0;
|
||||
}
|
||||
|
@ -566,7 +562,13 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
|
|||
return 0;
|
||||
}
|
||||
|
||||
ret = dp_display_usbpd_configure_cb(&dp->dp_display.pdev->dev);
|
||||
ret = pm_runtime_resume_and_get(&pdev->dev);
|
||||
if (ret) {
|
||||
DRM_ERROR("failed to pm_runtime_resume\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = dp_display_usbpd_configure_cb(&pdev->dev);
|
||||
if (ret) { /* link train failed */
|
||||
dp->hpd_state = ST_DISCONNECTED;
|
||||
} else {
|
||||
|
@ -598,6 +600,7 @@ static void dp_display_handle_plugged_change(struct msm_dp *dp_display,
|
|||
static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
|
||||
{
|
||||
u32 state;
|
||||
struct platform_device *pdev = dp->dp_display.pdev;
|
||||
|
||||
mutex_lock(&dp->event_mutex);
|
||||
|
||||
|
@ -648,6 +651,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
|
|||
dp->dp_display.connector_type, state);
|
||||
|
||||
/* uevent will complete disconnection part */
|
||||
pm_runtime_put_sync(&pdev->dev);
|
||||
mutex_unlock(&dp->event_mutex);
|
||||
return 0;
|
||||
}
|
||||
|
@ -663,7 +667,7 @@ static int dp_irq_hpd_handle(struct dp_display_private *dp, u32 data)
|
|||
drm_dbg_dp(dp->drm_dev, "Before, type=%d hpd_state=%d\n",
|
||||
dp->dp_display.connector_type, state);
|
||||
|
||||
if (state == ST_DISPLAY_OFF || state == ST_SUSPENDED) {
|
||||
if (state == ST_DISPLAY_OFF) {
|
||||
mutex_unlock(&dp->event_mutex);
|
||||
return 0;
|
||||
}
|
||||
|
@ -1075,7 +1079,6 @@ static int hpd_event_thread(void *data)
|
|||
|
||||
switch (todo->event_id) {
|
||||
case EV_HPD_INIT_SETUP:
|
||||
dp_display_host_init(dp_priv);
|
||||
break;
|
||||
case EV_HPD_PLUG_INT:
|
||||
dp_hpd_plug_handle(dp_priv, todo->data);
|
||||
|
@ -1167,7 +1170,9 @@ static int dp_display_request_irq(struct dp_display_private *dp)
|
|||
}
|
||||
|
||||
rc = devm_request_irq(&pdev->dev, dp->irq, dp_display_irq_handler,
|
||||
IRQF_TRIGGER_HIGH, "dp_display_isr", dp);
|
||||
IRQF_TRIGGER_HIGH|IRQF_NO_AUTOEN,
|
||||
"dp_display_isr", dp);
|
||||
|
||||
if (rc < 0) {
|
||||
DRM_ERROR("failed to request IRQ%u: %d\n",
|
||||
dp->irq, rc);
|
||||
|
@ -1253,6 +1258,10 @@ static int dp_display_probe(struct platform_device *pdev)
|
|||
|
||||
platform_set_drvdata(pdev, &dp->dp_display);
|
||||
|
||||
rc = devm_pm_runtime_enable(&pdev->dev);
|
||||
if (rc)
|
||||
goto err;
|
||||
|
||||
rc = dp_display_request_irq(dp);
|
||||
if (rc)
|
||||
goto err;
|
||||
|
@ -1275,115 +1284,52 @@ static void dp_display_remove(struct platform_device *pdev)
|
|||
struct dp_display_private *dp = dev_get_dp_display_private(&pdev->dev);
|
||||
|
||||
component_del(&pdev->dev, &dp_display_comp_ops);
|
||||
dp_power_client_deinit(dp->power);
|
||||
dp_display_deinit_sub_modules(dp);
|
||||
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
}
|
||||
|
||||
static int dp_pm_resume(struct device *dev)
|
||||
static int dp_pm_runtime_suspend(struct device *dev)
|
||||
{
|
||||
struct platform_device *pdev = to_platform_device(dev);
|
||||
struct msm_dp *dp_display = platform_get_drvdata(pdev);
|
||||
struct dp_display_private *dp;
|
||||
int sink_count = 0;
|
||||
struct dp_display_private *dp = dev_get_dp_display_private(dev);
|
||||
|
||||
dp = container_of(dp_display, struct dp_display_private, dp_display);
|
||||
|
||||
mutex_lock(&dp->event_mutex);
|
||||
|
||||
drm_dbg_dp(dp->drm_dev,
|
||||
"Before, type=%d core_inited=%d phy_inited=%d power_on=%d\n",
|
||||
dp->dp_display.connector_type, dp->core_initialized,
|
||||
dp->phy_initialized, dp_display->power_on);
|
||||
|
||||
/* start from disconnected state */
|
||||
dp->hpd_state = ST_DISCONNECTED;
|
||||
|
||||
/* turn on dp ctrl/phy */
|
||||
dp_display_host_init(dp);
|
||||
|
||||
if (dp_display->is_edp)
|
||||
dp_catalog_ctrl_hpd_enable(dp->catalog);
|
||||
|
||||
if (dp_catalog_link_is_connected(dp->catalog)) {
|
||||
/*
|
||||
* set sink to normal operation mode -- D0
|
||||
* before dpcd read
|
||||
*/
|
||||
dp_display_host_phy_init(dp);
|
||||
dp_link_psm_config(dp->link, &dp->panel->link_info, false);
|
||||
sink_count = drm_dp_read_sink_count(dp->aux);
|
||||
if (sink_count < 0)
|
||||
sink_count = 0;
|
||||
disable_irq(dp->irq);
|
||||
|
||||
if (dp->dp_display.is_edp) {
|
||||
dp_display_host_phy_exit(dp);
|
||||
dp_catalog_ctrl_hpd_disable(dp->catalog);
|
||||
}
|
||||
|
||||
dp->link->sink_count = sink_count;
|
||||
/*
|
||||
* can not declared display is connected unless
|
||||
* HDMI cable is plugged in and sink_count of
|
||||
* dongle become 1
|
||||
* also only signal audio when disconnected
|
||||
*/
|
||||
if (dp->link->sink_count) {
|
||||
dp->dp_display.link_ready = true;
|
||||
} else {
|
||||
dp->dp_display.link_ready = false;
|
||||
dp_display_handle_plugged_change(dp_display, false);
|
||||
}
|
||||
|
||||
drm_dbg_dp(dp->drm_dev,
|
||||
"After, type=%d sink=%d conn=%d core_init=%d phy_init=%d power=%d\n",
|
||||
dp->dp_display.connector_type, dp->link->sink_count,
|
||||
dp->dp_display.link_ready, dp->core_initialized,
|
||||
dp->phy_initialized, dp_display->power_on);
|
||||
|
||||
mutex_unlock(&dp->event_mutex);
|
||||
dp_display_host_deinit(dp);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dp_pm_suspend(struct device *dev)
|
||||
static int dp_pm_runtime_resume(struct device *dev)
|
||||
{
|
||||
struct platform_device *pdev = to_platform_device(dev);
|
||||
struct msm_dp *dp_display = platform_get_drvdata(pdev);
|
||||
struct dp_display_private *dp;
|
||||
struct dp_display_private *dp = dev_get_dp_display_private(dev);
|
||||
|
||||
dp = container_of(dp_display, struct dp_display_private, dp_display);
|
||||
|
||||
mutex_lock(&dp->event_mutex);
|
||||
|
||||
drm_dbg_dp(dp->drm_dev,
|
||||
"Before, type=%d core_inited=%d phy_inited=%d power_on=%d\n",
|
||||
dp->dp_display.connector_type, dp->core_initialized,
|
||||
dp->phy_initialized, dp_display->power_on);
|
||||
|
||||
/* mainlink enabled */
|
||||
if (dp_power_clk_status(dp->power, DP_CTRL_PM))
|
||||
dp_ctrl_off_link_stream(dp->ctrl);
|
||||
|
||||
dp_display_host_phy_exit(dp);
|
||||
|
||||
/* host_init will be called at pm_resume */
|
||||
dp_display_host_deinit(dp);
|
||||
|
||||
dp->hpd_state = ST_SUSPENDED;
|
||||
|
||||
drm_dbg_dp(dp->drm_dev,
|
||||
"After, type=%d core_inited=%d phy_inited=%d power_on=%d\n",
|
||||
dp->dp_display.connector_type, dp->core_initialized,
|
||||
dp->phy_initialized, dp_display->power_on);
|
||||
|
||||
mutex_unlock(&dp->event_mutex);
|
||||
/*
|
||||
* for eDP, host cotroller, HPD block and PHY are enabled here
|
||||
* but with HPD irq disabled
|
||||
*
|
||||
* for DP, only host controller is enabled here.
|
||||
* HPD block is enabled at dp_bridge_hpd_enable()
|
||||
* PHY will be enabled at plugin handler later
|
||||
*/
|
||||
dp_display_host_init(dp);
|
||||
if (dp->dp_display.is_edp) {
|
||||
dp_catalog_ctrl_hpd_enable(dp->catalog);
|
||||
dp_display_host_phy_init(dp);
|
||||
}
|
||||
|
||||
enable_irq(dp->irq);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct dev_pm_ops dp_pm_ops = {
|
||||
.suspend = dp_pm_suspend,
|
||||
.resume = dp_pm_resume,
|
||||
SET_RUNTIME_PM_OPS(dp_pm_runtime_suspend, dp_pm_runtime_resume, NULL)
|
||||
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
|
||||
pm_runtime_force_resume)
|
||||
};
|
||||
|
||||
static struct platform_driver dp_display_driver = {
|
||||
|
@ -1466,10 +1412,6 @@ static int dp_display_get_next_bridge(struct msm_dp *dp)
|
|||
aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
|
||||
|
||||
if (aux_bus && dp->is_edp) {
|
||||
dp_display_host_init(dp_priv);
|
||||
dp_catalog_ctrl_hpd_enable(dp_priv->catalog);
|
||||
dp_display_host_phy_init(dp_priv);
|
||||
|
||||
/*
|
||||
* The code below assumes that the panel will finish probing
|
||||
* by the time devm_of_dp_aux_populate_ep_devices() returns.
|
||||
|
@ -1566,6 +1508,11 @@ void dp_bridge_atomic_enable(struct drm_bridge *drm_bridge,
|
|||
dp_hpd_plug_handle(dp_display, 0);
|
||||
|
||||
mutex_lock(&dp_display->event_mutex);
|
||||
if (pm_runtime_resume_and_get(&dp->pdev->dev)) {
|
||||
DRM_ERROR("failed to pm_runtime_resume\n");
|
||||
mutex_unlock(&dp_display->event_mutex);
|
||||
return;
|
||||
}
|
||||
|
||||
state = dp_display->hpd_state;
|
||||
if (state != ST_DISPLAY_OFF && state != ST_MAINLINK_READY) {
|
||||
|
@ -1630,10 +1577,9 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
|
|||
mutex_lock(&dp_display->event_mutex);
|
||||
|
||||
state = dp_display->hpd_state;
|
||||
if (state != ST_DISCONNECT_PENDING && state != ST_CONNECTED) {
|
||||
mutex_unlock(&dp_display->event_mutex);
|
||||
return;
|
||||
}
|
||||
if (state != ST_DISCONNECT_PENDING && state != ST_CONNECTED)
|
||||
drm_dbg_dp(dp->drm_dev, "type=%d wrong hpd_state=%d\n",
|
||||
dp->connector_type, state);
|
||||
|
||||
dp_display_disable(dp_display);
|
||||
|
||||
|
@ -1646,6 +1592,8 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge,
|
|||
}
|
||||
|
||||
drm_dbg_dp(dp->drm_dev, "type=%d Done\n", dp->connector_type);
|
||||
|
||||
pm_runtime_put_sync(&dp->pdev->dev);
|
||||
mutex_unlock(&dp_display->event_mutex);
|
||||
}
|
||||
|
||||
|
@ -1684,7 +1632,21 @@ void dp_bridge_hpd_enable(struct drm_bridge *bridge)
|
|||
struct msm_dp *dp_display = dp_bridge->dp_display;
|
||||
struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display);
|
||||
|
||||
/*
|
||||
* this is for external DP with hpd irq enabled case,
|
||||
* step-1: dp_pm_runtime_resume() enable dp host only
|
||||
* step-2: enable hdp block and have hpd irq enabled here
|
||||
* step-3: waiting for plugin irq while phy is not initialized
|
||||
* step-4: DP PHY is initialized at plugin handler before link training
|
||||
*
|
||||
*/
|
||||
mutex_lock(&dp->event_mutex);
|
||||
if (pm_runtime_resume_and_get(&dp_display->pdev->dev)) {
|
||||
DRM_ERROR("failed to resume power\n");
|
||||
mutex_unlock(&dp->event_mutex);
|
||||
return;
|
||||
}
|
||||
|
||||
dp_catalog_ctrl_hpd_enable(dp->catalog);
|
||||
|
||||
/* enable HDP interrupts */
|
||||
|
@ -1706,6 +1668,8 @@ void dp_bridge_hpd_disable(struct drm_bridge *bridge)
|
|||
dp_catalog_ctrl_hpd_disable(dp->catalog);
|
||||
|
||||
dp_display->internal_hpd = false;
|
||||
|
||||
pm_runtime_put_sync(&dp_display->pdev->dev);
|
||||
mutex_unlock(&dp->event_mutex);
|
||||
}
|
||||
|
||||
|
@ -1720,11 +1684,6 @@ void dp_bridge_hpd_notify(struct drm_bridge *bridge,
|
|||
if (dp_display->internal_hpd)
|
||||
return;
|
||||
|
||||
if (!dp->core_initialized) {
|
||||
drm_dbg_dp(dp->drm_dev, "not initialized\n");
|
||||
return;
|
||||
}
|
||||
|
||||
if (!dp_display->link_ready && status == connector_status_connected)
|
||||
dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
|
||||
else if (dp_display->link_ready && status == connector_status_disconnected)
|
||||
|
|
|
@ -152,45 +152,17 @@ int dp_power_client_init(struct dp_power *dp_power)
|
|||
|
||||
power = container_of(dp_power, struct dp_power_private, dp_power);
|
||||
|
||||
pm_runtime_enable(power->dev);
|
||||
|
||||
return dp_power_clk_init(power);
|
||||
}
|
||||
|
||||
void dp_power_client_deinit(struct dp_power *dp_power)
|
||||
{
|
||||
struct dp_power_private *power;
|
||||
|
||||
power = container_of(dp_power, struct dp_power_private, dp_power);
|
||||
|
||||
pm_runtime_disable(power->dev);
|
||||
}
|
||||
|
||||
int dp_power_init(struct dp_power *dp_power)
|
||||
{
|
||||
int rc = 0;
|
||||
struct dp_power_private *power = NULL;
|
||||
|
||||
power = container_of(dp_power, struct dp_power_private, dp_power);
|
||||
|
||||
pm_runtime_get_sync(power->dev);
|
||||
|
||||
rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
|
||||
if (rc)
|
||||
pm_runtime_put_sync(power->dev);
|
||||
|
||||
return rc;
|
||||
return dp_power_clk_enable(dp_power, DP_CORE_PM, true);
|
||||
}
|
||||
|
||||
int dp_power_deinit(struct dp_power *dp_power)
|
||||
{
|
||||
struct dp_power_private *power;
|
||||
|
||||
power = container_of(dp_power, struct dp_power_private, dp_power);
|
||||
|
||||
dp_power_clk_enable(dp_power, DP_CORE_PM, false);
|
||||
pm_runtime_put_sync(power->dev);
|
||||
return 0;
|
||||
return dp_power_clk_enable(dp_power, DP_CORE_PM, false);
|
||||
}
|
||||
|
||||
struct dp_power *dp_power_get(struct device *dev, struct dp_parser *parser)
|
||||
|
|
|
@ -80,17 +80,6 @@ int dp_power_clk_enable(struct dp_power *power, enum dp_pm_type pm_type,
|
|||
*/
|
||||
int dp_power_client_init(struct dp_power *power);
|
||||
|
||||
/**
|
||||
* dp_power_clinet_deinit() - de-initialize clock and regulator modules
|
||||
*
|
||||
* @power: instance of power module
|
||||
* return: 0 for success, error for failure.
|
||||
*
|
||||
* This API will de-initialize the DisplayPort's clocks and regulator
|
||||
* modules.
|
||||
*/
|
||||
void dp_power_client_deinit(struct dp_power *power);
|
||||
|
||||
/**
|
||||
* dp_power_get() - configure and get the DisplayPort power module data
|
||||
*
|
||||
|
|
Loading…
Add table
Reference in a new issue