From 9e8b21410f310c50733f6e1730bae5a8e30d3570 Mon Sep 17 00:00:00 2001 From: Selvarasu Ganesan Date: Sat, 18 Jan 2025 11:31:33 +0530 Subject: [PATCH 01/25] usb: gadget: f_midi: Fixing wMaxPacketSize exceeded issue during MIDI bind retries The current implementation sets the wMaxPacketSize of bulk in/out endpoints to 1024 bytes at the end of the f_midi_bind function. However, in cases where there is a failure in the first midi bind attempt, consider rebinding. This scenario may encounter an f_midi_bind issue due to the previous bind setting the bulk endpoint's wMaxPacketSize to 1024 bytes, which exceeds the ep->maxpacket_limit where configured dwc3 TX/RX FIFO's maxpacket size of 512 bytes for IN/OUT endpoints in support HS speed only. Here the term "rebind" in this context refers to attempting to bind the MIDI function a second time in certain scenarios. The situations where rebinding is considered include: * When there is a failure in the first UDC write attempt, which may be caused by other functions bind along with MIDI. * Runtime composition change : Example : MIDI,ADB to MIDI. Or MIDI to MIDI,ADB. This commit addresses this issue by resetting the wMaxPacketSize before endpoint claim. And here there is no need to reset all values in the usb endpoint descriptor structure, as all members except wMaxPacketSize and bEndpointAddress have predefined values. This ensures that restores the endpoint to its expected configuration, and preventing conflicts with value of ep->maxpacket_limit. It also aligns with the approach used in other function drivers, which treat endpoint descriptors as if they were full speed before endpoint claim. Fixes: 46decc82ffd5 ("usb: gadget: unconditionally allocate hs/ss descriptor in bind operation") Cc: stable@vger.kernel.org Signed-off-by: Selvarasu Ganesan Link: https://lore.kernel.org/r/20250118060134.927-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_midi.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index 837fcdfa3840..9b991cf5b0f8 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -907,6 +907,15 @@ static int f_midi_bind(struct usb_configuration *c, struct usb_function *f) status = -ENODEV; + /* + * Reset wMaxPacketSize with maximum packet size of FS bulk transfer before + * endpoint claim. This ensures that the wMaxPacketSize does not exceed the + * limit during bind retries where configured dwc3 TX/RX FIFO's maxpacket + * size of 512 bytes for IN/OUT endpoints in support HS speed only. + */ + bulk_in_desc.wMaxPacketSize = cpu_to_le16(64); + bulk_out_desc.wMaxPacketSize = cpu_to_le16(64); + /* allocate instance-specific endpoints */ midi->in_ep = usb_ep_autoconfig(cdev->gadget, &bulk_in_desc); if (!midi->in_ep) From 309005e448c1f3e4b81e4416406991b7c3339c1d Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Mon, 20 Jan 2025 15:42:51 +0100 Subject: [PATCH 02/25] usb: phy: generic: Use proper helper for property detection Since commit c141ecc3cecd7 ("of: Warn when of_property_read_bool() is used on non-boolean properties") a warning is raised if this function is used for property detection. of_property_present() is the correct helper for this. Signed-off-by: Alexander Stein Link: https://lore.kernel.org/r/20250120144251.580981-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/phy/phy-generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 6c3ececf9137..8423be59ec0f 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -212,7 +212,7 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop) if (of_property_read_u32(node, "clock-frequency", &clk_rate)) clk_rate = 0; - needs_clk = of_property_read_bool(node, "clocks"); + needs_clk = of_property_present(node, "clocks"); } nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS); From 1ed3af5a2aaefd0ecd887ecabdc8da07220e31fe Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Tue, 21 Jan 2025 23:11:23 +0000 Subject: [PATCH 03/25] usb: dwc3: Document nostream_work Add missing description to the nostream_work of dwc3_ep. The work is used by bulk multi-stream endpoints for a NoStream event to reinitiate the stream if needed. Reported-by: Stephen Rothwell Closes: https://lore.kernel.org/linux-next/20250120182219.30dcb3c6@canb.auug.org.au/ Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/7cdeaa346d24907712aac533c1c5f90a03151189.1737500936.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index ac7c730f81ac..c955039bb4f6 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -717,6 +717,7 @@ struct dwc3_event_buffer { /** * struct dwc3_ep - device side endpoint representation * @endpoint: usb endpoint + * @nostream_work: work for handling bulk NoStream * @cancelled_list: list of cancelled requests for this endpoint * @pending_list: list of pending requests for this endpoint * @started_list: list of started requests on this endpoint From 335a1fc1193481f8027f176649c72868172f6f8b Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Wed, 22 Jan 2025 03:12:31 -0500 Subject: [PATCH 04/25] usb: gadget: udc: renesas_usb3: Fix compiler warning drivers/usb/gadget/udc/renesas_usb3.c: In function 'renesas_usb3_probe': drivers/usb/gadget/udc/renesas_usb3.c:2638:73: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size 6 [-Wformat-truncation=] 2638 | snprintf(usb3_ep->ep_name, sizeof(usb3_ep->ep_name), "ep%d", i); ^~~~~~~~~~~~~~~~~~~~~~~~ ^~ ^ Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: stable@vger.kernel.org Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202501201409.BIQPtkeB-lkp@intel.com/ Signed-off-by: Guo Ren Link: https://lore.kernel.org/r/20250122081231.47594-1-guoren@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/renesas_usb3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index fce5c41d9f29..89b304cf6d03 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -310,7 +310,7 @@ struct renesas_usb3_request { struct list_head queue; }; -#define USB3_EP_NAME_SIZE 8 +#define USB3_EP_NAME_SIZE 16 struct renesas_usb3_ep { struct usb_ep ep; struct renesas_usb3 *usb3; From 2240fed37afbcdb5e8b627bc7ad986891100e05d Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 22 Jan 2025 14:26:17 -0500 Subject: [PATCH 05/25] USB: hub: Ignore non-compliant devices with too many configs or interfaces Robert Morris created a test program which can cause usb_hub_to_struct_hub() to dereference a NULL or inappropriate pointer: Oops: general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14 Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110 ... Call Trace: ? die_addr+0x31/0x80 ? exc_general_protection+0x1b4/0x3c0 ? asm_exc_general_protection+0x26/0x30 ? usb_hub_adjust_deviceremovable+0x78/0x110 hub_probe+0x7c7/0xab0 usb_probe_interface+0x14b/0x350 really_probe+0xd0/0x2d0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x6e/0x110 driver_probe_device+0x1a/0x90 __device_attach_driver+0x7e/0xc0 bus_for_each_drv+0x7f/0xd0 __device_attach+0xaa/0x1a0 bus_probe_device+0x8b/0xa0 device_add+0x62e/0x810 usb_set_configuration+0x65d/0x990 usb_generic_driver_probe+0x4b/0x70 usb_probe_device+0x36/0xd0 The cause of this error is that the device has two interfaces, and the hub driver binds to interface 1 instead of interface 0, which is where usb_hub_to_struct_hub() looks. We can prevent the problem from occurring by refusing to accept hub devices that violate the USB spec by having more than one configuration or interface. Reported-and-tested-by: Robert Morris Cc: stable Closes: https://lore.kernel.org/linux-usb/95564.1737394039@localhost/ Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/c27f3bf4-63d8-4fb5-ac82-09e3cd19f61c@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c3f839637cb5..0cd44f1fd56d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1848,6 +1848,17 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) desc = intf->cur_altsetting; hdev = interface_to_usbdev(intf); + /* + * The USB 2.0 spec prohibits hubs from having more than one + * configuration or interface, and we rely on this prohibition. + * Refuse to accept a device that violates it. + */ + if (hdev->descriptor.bNumConfigurations > 1 || + hdev->actconfig->desc.bNumInterfaces > 1) { + dev_err(&intf->dev, "Invalid hub with more than one config or interface\n"); + return -EINVAL; + } + /* * Set default autosuspend delay as 0 to speedup bus suspend, * based on the below considerations: From 58cd423820d5b5610977e55e4acdd06628829ede Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Fri, 24 Jan 2025 18:33:25 +0100 Subject: [PATCH 06/25] usb: dwc2: gadget: remove of_node reference upon udc_stop In dwc2_hsotg_udc_start(), e.g. when binding composite driver, "of_node" is set to hsotg->dev->of_node. It causes errors when binding the gadget driver several times, on stm32mp157c-ev1 board. Below error is seen: "pin PA10 already requested by 49000000.usb-otg; cannot claim for gadget.0" The first time, no issue is seen as when registering the driver, of_node isn't NULL: -> gadget_dev_desc_UDC_store -> usb_gadget_register_driver_owner -> driver_register ... -> really_probe -> pinctrl_bind_pins (no effect) Then dwc2_hsotg_udc_start() sets of_node. The second time (stop the gadget, reconfigure it, then start it again), of_node has been set, so the probing code tries to acquire pins for the gadget. These pins are hold by the controller, hence the error. So clear gadget.dev.of_node in udc_stop() routine to avoid the issue. Fixes: 7d7b22928b90 ("usb: gadget: s3c-hsotg: Propagate devicetree to gadget drivers") Cc: stable Signed-off-by: Fabrice Gasnier Link: https://lore.kernel.org/r/20250124173325.2747710-1-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/gadget.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index e7bf9cc635be..bd4c788f03bc 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -4615,6 +4615,7 @@ static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget) spin_lock_irqsave(&hsotg->lock, flags); hsotg->driver = NULL; + hsotg->gadget.dev.of_node = NULL; hsotg->gadget.speed = USB_SPEED_UNKNOWN; hsotg->enabled = 0; From da1668997052ed1cb00322e1f3b63702615c9429 Mon Sep 17 00:00:00 2001 From: John Keeping Date: Thu, 30 Jan 2025 19:50:34 +0000 Subject: [PATCH 07/25] usb: gadget: f_midi: fix MIDI Streaming descriptor lengths While the MIDI jacks are configured correctly, and the MIDIStreaming endpoint descriptors are filled with the correct information, bNumEmbMIDIJack and bLength are set incorrectly in these descriptors. This does not matter when the numbers of in and out ports are equal, but when they differ the host will receive broken descriptors with uninitialized stack memory leaking into the descriptor for whichever value is smaller. The precise meaning of "in" and "out" in the port counts is not clearly defined and can be confusing. But elsewhere the driver consistently uses this to match the USB meaning of IN and OUT viewed from the host, so that "in" ports send data to the host and "out" ports receive data from it. Cc: stable Fixes: c8933c3f79568 ("USB: gadget: f_midi: allow a dynamic number of input and output ports") Signed-off-by: John Keeping Reviewed-by: Takashi Iwai Link: https://lore.kernel.org/r/20250130195035.3883857-1-jkeeping@inmusicbrands.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_midi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index 9b991cf5b0f8..47260d65066a 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -1009,11 +1009,11 @@ static int f_midi_bind(struct usb_configuration *c, struct usb_function *f) } /* configure the endpoint descriptors ... */ - ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports); - ms_out_desc.bNumEmbMIDIJack = midi->in_ports; + ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports); + ms_out_desc.bNumEmbMIDIJack = midi->out_ports; - ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports); - ms_in_desc.bNumEmbMIDIJack = midi->out_ports; + ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports); + ms_in_desc.bNumEmbMIDIJack = midi->in_ports; /* ... and add them to the list */ endpoint_descriptor_index = i; From db79e75460fc59b19f9c89d4b068e61cee59f37d Mon Sep 17 00:00:00 2001 From: "Chester A. Unal" Date: Fri, 24 Jan 2025 10:28:00 +0000 Subject: [PATCH 08/25] USB: serial: option: add MeiG Smart SLM828 MeiG Smart SLM828 is an LTE-A CAT6 modem with the mPCIe form factor. The "Cls=ff(vend.) Sub=10 Prot=02" and "Cls=ff(vend.) Sub=10 Prot=03" interfaces respond to AT commands. Add these interfaces. The product ID the modem uses is shared across multiple modems. Therefore, add comments to describe which interface is used for which modem. T: Bus=01 Lev=01 Prnt=05 Port=01 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev=05.04 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=4da7ec42 C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=10 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=02 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=03 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=04 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=05 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Chester A. Unal Link: https://lore.kernel.org/20250124-for-johan-meig-slm828-v2-1-6b4cd3f6344f@arinc9.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 1e2ae0c6c41c..887a1c687b52 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -621,7 +621,10 @@ static void option_instat_callback(struct urb *urb); /* MeiG Smart Technology products */ #define MEIGSMART_VENDOR_ID 0x2dee -/* MeiG Smart SRM815/SRM825L based on Qualcomm 315 */ +/* + * MeiG Smart SLM828, SRM815, and SRM825L use the same product ID. SLM828 is + * based on Qualcomm SDX12. SRM815 and SRM825L are based on Qualcomm 315. + */ #define MEIGSMART_PRODUCT_SRM825L 0x4d22 /* MeiG Smart SLM320 based on UNISOC UIS8910 */ #define MEIGSMART_PRODUCT_SLM320 0x4d41 @@ -2405,10 +2408,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SLM320, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SLM770A, 0xff, 0, 0) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0, 0) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x30) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x40) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x60) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0, 0) }, /* MeiG Smart SRM815 */ + { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0x10, 0x02) }, /* MeiG Smart SLM828 */ + { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0x10, 0x03) }, /* MeiG Smart SLM828 */ + { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x30) }, /* MeiG Smart SRM815 and SRM825L */ + { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x40) }, /* MeiG Smart SRM825L */ + { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x60) }, /* MeiG Smart SRM825L */ { USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0530, 0xff), /* TCL IK512 MBIM */ .driver_info = NCTRL(1) }, { USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0640, 0xff), /* TCL IK512 ECM */ From c979fb5ece2dc11cc9cc3d5c66f750e210bfdee2 Mon Sep 17 00:00:00 2001 From: Fabio Porcedda Date: Wed, 5 Feb 2025 18:16:45 +0100 Subject: [PATCH 09/25] USB: serial: option: add Telit Cinterion FN990B compositions Add the following Telit Cinterion FN990B40 compositions: 0x10d0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10d0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN990 S: SerialNumber=43b38f19 C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10d1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10d1 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN990 S: SerialNumber=43b38f19 C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10d2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10d2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN990 S: SerialNumber=43b38f19 C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10d3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 20 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10d3 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN990 S: SerialNumber=43b38f19 C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda Reviewed-by: Daniele Palmas Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 887a1c687b52..7f6eff505085 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1406,6 +1406,22 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | NCTRL(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c8, 0xff), /* Telit FE910C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d0, 0x60) }, /* Telit FN990B (rmnet) */ + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d0, 0x40) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d0, 0x30), + .driver_info = NCTRL(5) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d1, 0x60) }, /* Telit FN990B (MBIM) */ + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d1, 0x40) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d1, 0x30), + .driver_info = NCTRL(6) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d2, 0x60) }, /* Telit FN990B (RNDIS) */ + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d2, 0x40) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d2, 0x30), + .driver_info = NCTRL(6) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d3, 0x60) }, /* Telit FN990B (ECM) */ + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d3, 0x40) }, + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d3, 0x30), + .driver_info = NCTRL(6) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), From 12606fe73f33647c5e79bf666833bf0b225e649d Mon Sep 17 00:00:00 2001 From: Fabio Porcedda Date: Wed, 5 Feb 2025 18:16:47 +0100 Subject: [PATCH 10/25] USB: serial: option: fix Telit Cinterion FN990A name The correct name for FN990 is FN990A so use it in order to avoid confusion with FN990B. Signed-off-by: Fabio Porcedda Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7f6eff505085..4a59a40f750a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1370,15 +1370,15 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(2) | RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1063, 0xff), /* Telit LN920 (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1070, 0xff), /* Telit FN990 (rmnet) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1070, 0xff), /* Telit FN990A (rmnet) */ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1071, 0xff), /* Telit FN990 (MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1071, 0xff), /* Telit FN990A (MBIM) */ .driver_info = NCTRL(0) | RSVD(1) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1072, 0xff), /* Telit FN990 (RNDIS) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1072, 0xff), /* Telit FN990A (RNDIS) */ .driver_info = NCTRL(2) | RSVD(3) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff), /* Telit FN990 (ECM) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff), /* Telit FN990A (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, - { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990 (PCIe) */ + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990A (PCIe) */ .driver_info = RSVD(0) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff), /* Telit FE990 (rmnet) */ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, From 6aa8a63c471eb6756aabd03f880feffe6a7af6c9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 11 Feb 2025 15:45:16 +0100 Subject: [PATCH 11/25] USB: serial: option: drop MeiG Smart defines Several MeiG Smart modems apparently use the same product id, making the defines even less useful. Drop them in favour of using comments consistently to make the id table slightly less unwieldy. Cc: stable@vger.kernel.org Acked-by: Chester A. Unal Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 28 ++++++++-------------------- 1 file changed, 8 insertions(+), 20 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4a59a40f750a..58bd54e8c483 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -619,18 +619,6 @@ static void option_instat_callback(struct urb *urb); /* Luat Air72*U series based on UNISOC UIS8910 uses UNISOC's vendor ID */ #define LUAT_PRODUCT_AIR720U 0x4e00 -/* MeiG Smart Technology products */ -#define MEIGSMART_VENDOR_ID 0x2dee -/* - * MeiG Smart SLM828, SRM815, and SRM825L use the same product ID. SLM828 is - * based on Qualcomm SDX12. SRM815 and SRM825L are based on Qualcomm 315. - */ -#define MEIGSMART_PRODUCT_SRM825L 0x4d22 -/* MeiG Smart SLM320 based on UNISOC UIS8910 */ -#define MEIGSMART_PRODUCT_SLM320 0x4d41 -/* MeiG Smart SLM770A based on ASR1803 */ -#define MEIGSMART_PRODUCT_SLM770A 0x4d57 - /* Device flags */ /* Highest interface number which can be used with NCTRL() and RSVD() */ @@ -2366,6 +2354,14 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a05, 0xff) }, /* Fibocom FM650-CN (NCM mode) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a06, 0xff) }, /* Fibocom FM650-CN (RNDIS mode) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a07, 0xff) }, /* Fibocom FM650-CN (MBIM mode) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d41, 0xff, 0, 0) }, /* MeiG Smart SLM320 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d57, 0xff, 0, 0) }, /* MeiG Smart SLM770A */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0, 0) }, /* MeiG Smart SRM815 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0x10, 0x02) }, /* MeiG Smart SLM828 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0x10, 0x03) }, /* MeiG Smart SLM828 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0xff, 0x30) }, /* MeiG Smart SRM815 and SRM825L */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0xff, 0x40) }, /* MeiG Smart SRM825L */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d22, 0xff, 0xff, 0x60) }, /* MeiG Smart SRM825L */ { USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ @@ -2422,14 +2418,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SLM320, 0xff, 0, 0) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SLM770A, 0xff, 0, 0) }, - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0, 0) }, /* MeiG Smart SRM815 */ - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0x10, 0x02) }, /* MeiG Smart SLM828 */ - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0x10, 0x03) }, /* MeiG Smart SLM828 */ - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x30) }, /* MeiG Smart SRM815 and SRM825L */ - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x40) }, /* MeiG Smart SRM825L */ - { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x60) }, /* MeiG Smart SRM825L */ { USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0530, 0xff), /* TCL IK512 MBIM */ .driver_info = NCTRL(1) }, { USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0640, 0xff), /* TCL IK512 ECM */ From e71f7f42e3c874ac3314b8f250e8416a706165af Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Sun, 2 Feb 2025 20:49:35 +0800 Subject: [PATCH 12/25] USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI LS7A EHCI controller doesn't have extended capabilities, so the EECP (EHCI Extended Capabilities Pointer) field of HCCPARAMS register should be 0x0, but it reads as 0xa0 now. This is a hardware flaw and will be fixed in future, now just clear the EECP field to avoid error messages on boot: ...... [ 0.581675] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581699] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581716] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581851] pci 0000:00:04.1: EHCI: unrecognized capability ff ...... [ 0.581916] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.581951] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.582704] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.582799] pci 0000:00:05.1: EHCI: unrecognized capability ff ...... Cc: stable Signed-off-by: Baoqi Zhang Signed-off-by: Huacai Chen Link: https://lore.kernel.org/r/20250202124935.480500-1-chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/pci-quirks.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 1f9c1b1435d8..0404489c2f6a 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -958,6 +958,15 @@ static void quirk_usb_disable_ehci(struct pci_dev *pdev) * booting from USB disk or using a usb keyboard */ hcc_params = readl(base + EHCI_HCC_PARAMS); + + /* LS7A EHCI controller doesn't have extended capabilities, the + * EECP (EHCI Extended Capabilities Pointer) field of HCCPARAMS + * register should be 0x0 but it reads as 0xa0. So clear it to + * avoid error messages on boot. + */ + if (pdev->vendor == PCI_VENDOR_ID_LOONGSON && pdev->device == 0x7a14) + hcc_params &= ~(0xffL << 8); + offset = (hcc_params >> 8) & 0xff; while (offset && --count) { pci_read_config_dword(pdev, offset, &cap); From c81d9fcd5b9402166048f377d4e5e0ee6f9ef26d Mon Sep 17 00:00:00 2001 From: Michal Pecio Date: Tue, 28 Jan 2025 10:45:29 +0100 Subject: [PATCH 13/25] usb: xhci: Restore xhci_pci support for Renesas HCs Some Renesas HCs require firmware upload to work, this is handled by the xhci_pci_renesas driver. Other variants of those chips load firmware from a SPI flash and are ready to work with xhci_pci alone. A refactor merged in v6.12 broke the latter configuration so that users are finding their hardware ignored by the normal driver and are forced to enable the firmware loader which isn't really necessary on their systems. Let xhci_pci work with those chips as before when the firmware loader is disabled by kernel configuration. Fixes: 25f51b76f90f ("xhci-pci: Make xhci-pci-renesas a proper modular driver") Cc: stable Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219616 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219726 Signed-off-by: Michal Pecio Tested-by: Nicolai Buchwitz Link: https://lore.kernel.org/r/20250128104529.58a79bfc@foxbook Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 2d1e205c14c6..ad0ff356f6fa 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -653,8 +653,8 @@ put_runtime_pm: } EXPORT_SYMBOL_NS_GPL(xhci_pci_common_probe, "xhci"); -static const struct pci_device_id pci_ids_reject[] = { - /* handled by xhci-pci-renesas */ +/* handled by xhci-pci-renesas if enabled */ +static const struct pci_device_id pci_ids_renesas[] = { { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, 0x0014) }, { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, 0x0015) }, { /* end: all zeroes */ } @@ -662,7 +662,8 @@ static const struct pci_device_id pci_ids_reject[] = { static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { - if (pci_match_id(pci_ids_reject, dev)) + if (IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS) && + pci_match_id(pci_ids_renesas, dev)) return -ENODEV; return xhci_pci_common_probe(dev, id); From e563b01208f4d1f609bcab13333b6c0e24ce6a01 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Wed, 12 Feb 2025 19:15:15 +0100 Subject: [PATCH 14/25] usb: cdc-acm: Check control transfer buffer size before access If the first fragment is shorter than struct usb_cdc_notification, we can't calculate an expected_size. Log an error and discard the notification instead of reading lengths from memory outside the received data, which can lead to memory corruption when the expected_size decreases between fragments, causing `expected_size - acm->nb_index` to wrap. This issue has been present since the beginning of git history; however, it only leads to memory corruption since commit ea2583529cd1 ("cdc-acm: reassemble fragmented notifications"). A mitigating factor is that acm_ctrl_irq() can only execute after userspace has opened /dev/ttyACM*; but if ModemManager is running, ModemManager will do that automatically depending on the USB device's vendor/product IDs and its other interfaces. Cc: stable Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 6b37d1c47fce..39c7db7bcd21 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -371,7 +371,7 @@ static void acm_process_notification(struct acm *acm, unsigned char *buf) static void acm_ctrl_irq(struct urb *urb) { struct acm *acm = urb->context; - struct usb_cdc_notification *dr = urb->transfer_buffer; + struct usb_cdc_notification *dr; unsigned int current_size = urb->actual_length; unsigned int expected_size, copy_size, alloc_size; int retval; @@ -398,9 +398,20 @@ static void acm_ctrl_irq(struct urb *urb) usb_mark_last_busy(acm->dev); - if (acm->nb_index) + if (acm->nb_index == 0) { + /* + * The first chunk of a message must contain at least the + * notification header with the length field, otherwise we + * can't get an expected_size. + */ + if (current_size < sizeof(struct usb_cdc_notification)) { + dev_dbg(&acm->control->dev, "urb too short\n"); + goto exit; + } + dr = urb->transfer_buffer; + } else { dr = (struct usb_cdc_notification *)acm->notification_buffer; - + } /* size = notification-header + (optional) data */ expected_size = sizeof(struct usb_cdc_notification) + le16_to_cpu(dr->wLength); From 12e712964f41d05ae034989892de445781c46730 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Wed, 12 Feb 2025 19:15:16 +0100 Subject: [PATCH 15/25] usb: cdc-acm: Fix handling of oversized fragments If we receive an initial fragment of size 8 bytes which specifies a wLength of 1 byte (so the reassembled message is supposed to be 9 bytes long), and we then receive a second fragment of size 9 bytes (which is not supposed to happen), we currently wrongly bypass the fragment reassembly code but still pass the pointer to the acm->notification_buffer to acm_process_notification(). Make this less wrong by always going through fragment reassembly when we expect more fragments. Before this patch, receiving an overlong fragment could lead to `newctrl` in acm_process_notification() being uninitialized data (instead of data coming from the device). Cc: stable Fixes: ea2583529cd1 ("cdc-acm: reassemble fragmented notifications") Signed-off-by: Jann Horn Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 39c7db7bcd21..c70f34993623 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -416,7 +416,7 @@ static void acm_ctrl_irq(struct urb *urb) expected_size = sizeof(struct usb_cdc_notification) + le16_to_cpu(dr->wLength); - if (current_size < expected_size) { + if (acm->nb_index != 0 || current_size < expected_size) { /* notification is transmitted fragmented, reassemble */ if (acm->nb_size < expected_size) { u8 *new_buffer; From 7284922f3e4fa285dff1b8bb593aa9a0b8458f30 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 9 Feb 2025 15:56:11 +0100 Subject: [PATCH 16/25] USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk Add Renesas R-Car D3 USB Download mode quirk and update comments on all the other Renesas R-Car USB Download mode quirks to discern them from each other. This follows R-Car Series, 3rd Generation reference manual Rev.2.00 chapter 19.2.8 USB download mode . Fixes: 6d853c9e4104 ("usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode") Cc: stable Signed-off-by: Marek Vasut Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20250209145708.106914-1-marek.vasut+renesas@mailbox.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index c70f34993623..c2ecfa3c8349 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1738,13 +1738,16 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, - { USB_DEVICE(0x045b, 0x023c), /* Renesas USB Download mode */ + { USB_DEVICE(0x045b, 0x023c), /* Renesas R-Car H3 USB Download mode */ .driver_info = DISABLE_ECHO, /* Don't echo banner */ }, - { USB_DEVICE(0x045b, 0x0248), /* Renesas USB Download mode */ + { USB_DEVICE(0x045b, 0x0247), /* Renesas R-Car D3 USB Download mode */ .driver_info = DISABLE_ECHO, /* Don't echo banner */ }, - { USB_DEVICE(0x045b, 0x024D), /* Renesas USB Download mode */ + { USB_DEVICE(0x045b, 0x0248), /* Renesas R-Car M3-N USB Download mode */ + .driver_info = DISABLE_ECHO, /* Don't echo banner */ + }, + { USB_DEVICE(0x045b, 0x024D), /* Renesas R-Car E3 USB Download mode */ .driver_info = DISABLE_ECHO, /* Don't echo banner */ }, { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */ From 159daf1258227f44b26b5d38f4aa8f37b8cca663 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 6 Feb 2025 17:18:36 +0200 Subject: [PATCH 17/25] USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone The fastboot tool for communicating with Android bootloaders does not work reliably with this device if USB 2 Link Power Management (LPM) is enabled. Various fastboot commands are affected, including the following, which usually reproduces the problem within two tries: fastboot getvar kernel getvar:kernel FAILED (remote: 'GetVar Variable Not found') This issue was hidden on many systems up until commit 63a1f8454962 ("xhci: stored cached port capability values in one place") as the xhci driver failed to detect USB 2 LPM support if USB 3 ports were listed before USB 2 ports in the "supported protocol capabilities". Adding the quirk resolves the issue. No drawbacks are expected since the device uses different USB product IDs outside of fastboot mode, and since fastboot commands worked before, until LPM was enabled on the tested system by the aforementioned commit. Based on a patch from Forest from which most of the code and commit message is taken. Cc: stable Reported-by: Forest Closes: https://lore.kernel.org/hk8umj9lv4l4qguftdq1luqtdrpa1gks5l@sonic.net Tested-by: Forest Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20250206151836.51742-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 67732c791c93..59ed9768dae1 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -435,6 +435,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0c45, 0x7056), .driver_info = USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* Sony Xperia XZ1 Compact (lilac) smartphone in fastboot mode */ + { USB_DEVICE(0x0fce, 0x0dde), .driver_info = USB_QUIRK_NO_LPM }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, From d3a8c28426fc1fb3252753a9f1db0d691ffc21b0 Mon Sep 17 00:00:00 2001 From: Selvarasu Ganesan Date: Sat, 1 Feb 2025 22:09:02 +0530 Subject: [PATCH 18/25] usb: dwc3: Fix timeout issue during controller enter/exit from halt state MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is a frequent timeout during controller enter/exit from halt state after toggling the run_stop bit by SW. This timeout occurs when performing frequent role switches between host and device, causing device enumeration issues due to the timeout. This issue was not present when USB2 suspend PHY was disabled by passing the SNPS quirks (snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS. However, there is a requirement to enable USB2 suspend PHY by setting of GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts in gadget or host mode results in the timeout issue. This commit addresses this timeout issue by ensuring that the bits GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting the dwc3_gadget_run_stop sequence and restoring them after the dwc3_gadget_run_stop sequence is completed. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable Signed-off-by: Selvarasu Ganesan Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20250201163903.459-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index d27af65eb08a..ddd6b2ce5710 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2629,10 +2629,38 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) { u32 reg; u32 timeout = 2000; + u32 saved_config = 0; if (pm_runtime_suspended(dwc->dev)) return 0; + /* + * When operating in USB 2.0 speeds (HS/FS), ensure that + * GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting + * or stopping the controller. This resolves timeout issues that occur + * during frequent role switches between host and device modes. + * + * Save and clear these settings, then restore them after completing the + * controller start or stop sequence. + * + * This solution was discovered through experimentation as it is not + * mentioned in the dwc3 programming guide. It has been tested on an + * Exynos platforms. + */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + if (reg & DWC3_GUSB2PHYCFG_SUSPHY) { + saved_config |= DWC3_GUSB2PHYCFG_SUSPHY; + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + } + + if (reg & DWC3_GUSB2PHYCFG_ENBLSLPM) { + saved_config |= DWC3_GUSB2PHYCFG_ENBLSLPM; + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + } + + if (saved_config) + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + reg = dwc3_readl(dwc->regs, DWC3_DCTL); if (is_on) { if (DWC3_VER_IS_WITHIN(DWC3, ANY, 187A)) { @@ -2660,6 +2688,12 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) reg &= DWC3_DSTS_DEVCTRLHLT; } while (--timeout && !(!is_on ^ !reg)); + if (saved_config) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg |= saved_config; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + } + if (!timeout) return -ETIMEDOUT; From 4aac0db5a0ebc599d4ad9bf5ebab78afa1f33e10 Mon Sep 17 00:00:00 2001 From: Stefan Eichenberger Date: Mon, 3 Feb 2025 11:58:24 +0100 Subject: [PATCH 19/25] usb: core: fix pipe creation for get_bMaxPacketSize0 When usb_control_msg is used in the get_bMaxPacketSize0 function, the USB pipe does not include the endpoint device number. This can cause failures when a usb hub port is reinitialized after encountering a bad cable connection. As a result, the system logs the following error messages: usb usb2-port1: cannot reset (err = -32) usb usb2-port1: Cannot enable. Maybe the USB cable is bad? usb usb2-port1: attempt power cycle usb 2-1: new high-speed USB device number 5 using ci_hdrc usb 2-1: device descriptor read/8, error -71 The problem began after commit 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads"). There usb_get_device_descriptor was replaced with get_bMaxPacketSize0. Unlike usb_get_device_descriptor, the get_bMaxPacketSize0 function uses the macro usb_rcvaddr0pipe, which does not include the endpoint device number. usb_get_device_descriptor, on the other hand, used the macro usb_rcvctrlpipe, which includes the endpoint device number. By modifying the get_bMaxPacketSize0 function to use usb_rcvctrlpipe instead of usb_rcvaddr0pipe, the issue can be resolved. This change will ensure that the endpoint device number is included in the USB pipe, preventing reinitialization failures. If the endpoint has not set the device number yet, it will still work because the device number is 0 in udev. Cc: stable Fixes: 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads") Signed-off-by: Stefan Eichenberger Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20250203105840.17539-1-eichest@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 0cd44f1fd56d..a76bb50b6202 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4709,7 +4709,6 @@ void usb_ep0_reinit(struct usb_device *udev) EXPORT_SYMBOL_GPL(usb_ep0_reinit); #define usb_sndaddr0pipe() (PIPE_CONTROL << 30) -#define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN) static int hub_set_address(struct usb_device *udev, int devnum) { @@ -4815,7 +4814,7 @@ static int get_bMaxPacketSize0(struct usb_device *udev, for (i = 0; i < GET_MAXPACKET0_TRIES; ++i) { /* Start with invalid values in case the transfer fails */ buf->bDescriptorType = buf->bMaxPacketSize0 = 0; - rc = usb_control_msg(udev, usb_rcvaddr0pipe(), + rc = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, USB_DT_DEVICE << 8, 0, buf, size, From 4ab37fcb42832cdd3e9d5e50653285ca84d6686f Mon Sep 17 00:00:00 2001 From: Jill Donahue Date: Tue, 11 Feb 2025 10:48:05 -0700 Subject: [PATCH 20/25] USB: gadget: f_midi: f_midi_complete to call queue_work When using USB MIDI, a lock is attempted to be acquired twice through a re-entrant call to f_midi_transmit, causing a deadlock. Fix it by using queue_work() to schedule the inner f_midi_transmit() via a high priority work queue from the completion handler. Link: https://lore.kernel.org/all/CAArt=LjxU0fUZOj06X+5tkeGT+6RbXzpWg1h4t4Fwa_KGVAX6g@mail.gmail.com/ Fixes: d5daf49b58661 ("USB: gadget: midi: add midi function driver") Cc: stable Signed-off-by: Jill Donahue Link: https://lore.kernel.org/r/20250211174805.1369265-1-jdonahue@fender.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_midi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index 47260d65066a..da82598fcef8 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -283,7 +283,7 @@ f_midi_complete(struct usb_ep *ep, struct usb_request *req) /* Our transmit completed. See if there's more to go. * f_midi_transmit eats req, don't queue it again. */ req->length = 0; - f_midi_transmit(midi); + queue_work(system_highpri_wq, &midi->work); return; } break; From 399a45e5237ca14037120b1b895bd38a3b4492ea Mon Sep 17 00:00:00 2001 From: Roy Luo Date: Tue, 4 Feb 2025 23:36:42 +0000 Subject: [PATCH 21/25] usb: gadget: core: flush gadget workqueue after device removal device_del() can lead to new work being scheduled in gadget->work workqueue. This is observed, for example, with the dwc3 driver with the following call stack: device_del() gadget_unbind_driver() usb_gadget_disconnect_locked() dwc3_gadget_pullup() dwc3_gadget_soft_disconnect() usb_gadget_set_state() schedule_work(&gadget->work) Move flush_work() after device_del() to ensure the workqueue is cleaned up. Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue") Cc: stable Signed-off-by: Roy Luo Reviewed-by: Alan Stern Reviewed-by: Thinh Nguyen Link: https://lore.kernel.org/r/20250204233642.666991-1-royluo@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index a6f46364be65..4b3d5075621a 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -1543,8 +1543,8 @@ void usb_del_gadget(struct usb_gadget *gadget) kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE); sysfs_remove_link(&udc->dev.kobj, "gadget"); - flush_work(&gadget->work); device_del(&gadget->dev); + flush_work(&gadget->work); ida_free(&gadget_id_numbers, gadget->id_number); cancel_work_sync(&udc->vbus_work); device_unregister(&udc->dev); From e169d96eecd447ff7fd7542ca5fa0911f5622054 Mon Sep 17 00:00:00 2001 From: Lei Huang Date: Wed, 12 Feb 2025 17:38:29 +0800 Subject: [PATCH 22/25] USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist Teclast disk used on Huawei hisi platforms doesn't work well, losing connectivity intermittently if LPM is enabled. Add quirk disable LPM to resolve the issue. Signed-off-by: Lei Huang Cc: stable Link: https://lore.kernel.org/r/20250212093829.7379-1-huanglei814@163.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 59ed9768dae1..dfcfc142bd5e 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -528,6 +528,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Blackmagic Design UltraStudio SDI */ { USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM }, + /* Teclast disk */ + { USB_DEVICE(0x1f75, 0x0917), .driver_info = USB_QUIRK_NO_LPM }, + /* Hauppauge HVR-950q */ { USB_DEVICE(0x2040, 0x7200), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, From e5644be4079750a0a0a5a7068fd90b97bf6fac55 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 12 Feb 2025 14:55:14 +0100 Subject: [PATCH 23/25] usb: gadget: uvc: Fix unstarted kthread worker The behaviour of kthread_create_worker() was recently changed to align with the one of kthread_create(). The kthread worker is created but not awaken by default. This is to allow the use of kthread_affine_preferred() and kthread_bind[_mask]() with kthread workers. In order to keep the old behaviour and wake the kthread up, kthread_run_worker() must be used. All the pre-existing users have been converted, except for UVC that was introduced in the same merge window as the API change. This results in hangs: INFO: task UVCG:82 blocked for more than 491 seconds. Tainted: G T 6.13.0-rc2-00014-gb04e317b5226 #1 task:UVCG state:D stack:0 pid:82 Call Trace: __schedule schedule schedule_preempt_disabled kthread ? kthread_flush_work ret_from_fork ret_from_fork_asm entry_INT80_32 Fix this with converting UVCG kworker to the new API. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-lkp/202502121025.55bfa801-lkp@intel.com Fixes: f0bbfbd16b3b ("usb: gadget: uvc: rework to enqueue in pump worker from encoded queue") Cc: stable Cc: Michael Grzeschik Signed-off-by: Frederic Weisbecker Link: https://lore.kernel.org/r/20250212135514.30539-1-frederic@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/uvc_video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c index 79e223713d8b..fb77b0b21790 100644 --- a/drivers/usb/gadget/function/uvc_video.c +++ b/drivers/usb/gadget/function/uvc_video.c @@ -818,7 +818,7 @@ int uvcg_video_init(struct uvc_video *video, struct uvc_device *uvc) return -EINVAL; /* Allocate a kthread for asynchronous hw submit handler. */ - video->kworker = kthread_create_worker(0, "UVCG"); + video->kworker = kthread_run_worker(0, "UVCG"); if (IS_ERR(video->kworker)) { uvcg_err(&video->uvc->func, "failed to create UVCG kworker\n"); return PTR_ERR(video->kworker); From 634775a752a86784511018a108f3b530cc3399a7 Mon Sep 17 00:00:00 2001 From: Elson Roy Serrao Date: Thu, 6 Feb 2025 11:39:50 -0800 Subject: [PATCH 24/25] usb: roles: set switch registered flag early on The role switch registration and set_role() can happen in parallel as they are invoked independent of each other. There is a possibility that a driver might spend significant amount of time in usb_role_switch_register() API due to the presence of time intensive operations like component_add() which operate under common mutex. This leads to a time window after allocating the switch and before setting the registered flag where the set role notifications are dropped. Below timeline summarizes this behavior Thread1 | Thread2 usb_role_switch_register() | | | ---> allocate switch | | | ---> component_add() | usb_role_switch_set_role() | | | | | --> Drop role notifications | | since sw->registered | | flag is not set. | | --->Set registered flag.| To avoid this, set the registered flag early on in the switch register API. Fixes: b787a3e78175 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered") Cc: stable Signed-off-by: Elson Roy Serrao Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20250206193950.22421-1-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/roles/class.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c index c58a12c147f4..30482d4cf826 100644 --- a/drivers/usb/roles/class.c +++ b/drivers/usb/roles/class.c @@ -387,8 +387,11 @@ usb_role_switch_register(struct device *parent, dev_set_name(&sw->dev, "%s-role-switch", desc->name ? desc->name : dev_name(parent)); + sw->registered = true; + ret = device_register(&sw->dev); if (ret) { + sw->registered = false; put_device(&sw->dev); return ERR_PTR(ret); } @@ -399,8 +402,6 @@ usb_role_switch_register(struct device *parent, dev_warn(&sw->dev, "failed to add component\n"); } - sw->registered = true; - /* TODO: Symlinks for the host port and the device controller. */ return sw; From 659f5d55feb75782bd46cf130da3c1f240afe9ba Mon Sep 17 00:00:00 2001 From: Jos Wang Date: Thu, 13 Feb 2025 21:49:21 +0800 Subject: [PATCH 25/25] usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As PD2.0 spec ("6.5.6.2 PSSourceOffTimer")，the PSSourceOffTimer is used by the Policy Engine in Dual-Role Power device that is currently acting as a Sink to timeout on a PS_RDY Message during a Power Role Swap sequence. This condition leads to a Hard Reset for USB Type-A and Type-B Plugs and Error Recovery for Type-C plugs and return to USB Default Operation. Therefore, after PSSourceOffTimer timeout, the tcpm state machine should switch from PR_SWAP_SNK_SRC_SINK_OFF to ERROR_RECOVERY. This can also solve the test items in the USB power delivery compliance test: TEST.PD.PROT.SNK.12 PR_Swap – PSSourceOffTimer Timeout [1] https://usb.org/document-library/usb-power-delivery-compliance-test-specification-0/USB_PD3_CTS_Q4_2025_OR.zip Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable Signed-off-by: Jos Wang Reviewed-by: Heikki Krogerus Tested-by: Amit Sunil Dhamne Link: https://lore.kernel.org/r/20250213134921.3798-1-joswang1221@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 47be450d2be3..6bf1a22c785a 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -5591,8 +5591,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, port->pps_data.active, 0); tcpm_set_charge(port, false); - tcpm_set_state(port, hard_reset_state(port), - port->timings.ps_src_off_time); + tcpm_set_state(port, ERROR_RECOVERY, port->timings.ps_src_off_time); break; case PR_SWAP_SNK_SRC_SOURCE_ON: tcpm_enable_auto_vbus_discharge(port, true);