ice: Introduce ETH56G PHY model for E825C products

E825C products feature a new PHY model - ETH56G.

Introduces all necessary PHY definitions, functions etc. for ETH56G PHY,
analogous to E82X and E810 ones with addition of a few HW-specific
functionalities for ETH56G like one-step timestamping.

It ensures correct PTP initialization and operation for E825C products.

Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-7-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/intel/ice/ice_common.c

@@ -3067,11 +3067,13 @@ bool ice_is_100m_speed_supported(struct ice_hw *hw)
  * Note: In the structure of [phy_type_low, phy_type_high], there should
  * be one bit set, as this function will convert one PHY type to its
  * speed.
- * If no bit gets set, ICE_AQ_LINK_SPEED_UNKNOWN will be returned
+ *
- * If more than one bit gets set, ICE_AQ_LINK_SPEED_UNKNOWN will be returned
+ * Return:
+ * * PHY speed for recognized PHY type
+ * * If no bit gets set, ICE_AQ_LINK_SPEED_UNKNOWN will be returned
+ * * If more than one bit gets set, ICE_AQ_LINK_SPEED_UNKNOWN will be returned
  */
-static u16
+u16 ice_get_link_speed_based_on_phy_type(u64 phy_type_low, u64 phy_type_high)
-ice_get_link_speed_based_on_phy_type(u64 phy_type_low, u64 phy_type_high)
 {
 	u16 speed_phy_type_high = ICE_AQ_LINK_SPEED_UNKNOWN;
 	u16 speed_phy_type_low = ICE_AQ_LINK_SPEED_UNKNOWN;

drivers/net/ethernet/intel/ice/ice_common.h

@@ -262,6 +262,7 @@ int
 ice_aq_get_gpio(struct ice_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx,
 		bool *value, struct ice_sq_cd *cd);
 bool ice_is_100m_speed_supported(struct ice_hw *hw);
+u16 ice_get_link_speed_based_on_phy_type(u64 phy_type_low, u64 phy_type_high);
 int
 ice_aq_set_lldp_mib(struct ice_hw *hw, u8 mib_type, void *buf, u16 buf_size,
 		    struct ice_sq_cd *cd);

drivers/net/ethernet/intel/ice/ice_ptp.c

@@ -1011,6 +1011,28 @@ ice_ptp_release_tx_tracker(struct ice_pf *pf, struct ice_ptp_tx *tx)
 	tx->len = 0;
 }
 
+/**
+ * ice_ptp_init_tx_eth56g - Initialize tracking for Tx timestamps
+ * @pf: Board private structure
+ * @tx: the Tx tracking structure to initialize
+ * @port: the port this structure tracks
+ *
+ * Initialize the Tx timestamp tracker for this port. ETH56G PHYs
+ * have independent memory blocks for all ports.
+ *
+ * Return: 0 for success, -ENOMEM when failed to allocate Tx tracker
+ */
+static int ice_ptp_init_tx_eth56g(struct ice_pf *pf, struct ice_ptp_tx *tx,
+				  u8 port)
+{
+	tx->block = port;
+	tx->offset = 0;
+	tx->len = INDEX_PER_PORT_ETH56G;
+	tx->has_ready_bitmap = 1;
+
+	return ice_ptp_alloc_tx_tracker(tx);
+}
+
 /**
  * ice_ptp_init_tx_e82x - Initialize tracking for Tx timestamps
  * @pf: Board private structure
@@ -1341,10 +1363,19 @@ ice_ptp_port_phy_stop(struct ice_ptp_port *ptp_port)
 
 	mutex_lock(&ptp_port->ps_lock);
 
-	kthread_cancel_delayed_work_sync(&ptp_port->ov_work);
+	switch (hw->ptp.phy_model) {
+	case ICE_PHY_ETH56G:
+		err = ice_stop_phy_timer_eth56g(hw, port, true);
+		break;
+	case ICE_PHY_E82X:
+		kthread_cancel_delayed_work_sync(&ptp_port->ov_work);
 
-	err = ice_stop_phy_timer_e82x(hw, port, true);
+		err = ice_stop_phy_timer_e82x(hw, port, true);
-	if (err)
+		break;
+	default:
+		err = -ENODEV;
+	}
+	if (err && err != -EBUSY)
 		dev_err(ice_pf_to_dev(pf), "PTP failed to set PHY port %d down, err %d\n",
 			port, err);
 
@@ -1378,27 +1409,39 @@ ice_ptp_port_phy_restart(struct ice_ptp_port *ptp_port)
 
 	mutex_lock(&ptp_port->ps_lock);
 
-	kthread_cancel_delayed_work_sync(&ptp_port->ov_work);
+	switch (hw->ptp.phy_model) {
+	case ICE_PHY_ETH56G:
+		err = ice_start_phy_timer_eth56g(hw, port);
+		break;
+	case ICE_PHY_E82X:
+		/* Start the PHY timer in Vernier mode */
+		kthread_cancel_delayed_work_sync(&ptp_port->ov_work);
 
-	/* temporarily disable Tx timestamps while calibrating PHY offset */
+		/* temporarily disable Tx timestamps while calibrating
-	spin_lock_irqsave(&ptp_port->tx.lock, flags);
+		 * PHY offset
-	ptp_port->tx.calibrating = true;
+		 */
-	spin_unlock_irqrestore(&ptp_port->tx.lock, flags);
+		spin_lock_irqsave(&ptp_port->tx.lock, flags);
-	ptp_port->tx_fifo_busy_cnt = 0;
+		ptp_port->tx.calibrating = true;
+		spin_unlock_irqrestore(&ptp_port->tx.lock, flags);
+		ptp_port->tx_fifo_busy_cnt = 0;
 
-	/* Start the PHY timer in Vernier mode */
+		/* Start the PHY timer in Vernier mode */
-	err = ice_start_phy_timer_e82x(hw, port);
+		err = ice_start_phy_timer_e82x(hw, port);
-	if (err)
+		if (err)
-		goto out_unlock;
+			break;
 
-	/* Enable Tx timestamps right away */
+		/* Enable Tx timestamps right away */
-	spin_lock_irqsave(&ptp_port->tx.lock, flags);
+		spin_lock_irqsave(&ptp_port->tx.lock, flags);
-	ptp_port->tx.calibrating = false;
+		ptp_port->tx.calibrating = false;
-	spin_unlock_irqrestore(&ptp_port->tx.lock, flags);
+		spin_unlock_irqrestore(&ptp_port->tx.lock, flags);
 
-	kthread_queue_delayed_work(pf->ptp.kworker, &ptp_port->ov_work, 0);
+		kthread_queue_delayed_work(pf->ptp.kworker, &ptp_port->ov_work,
+					   0);
+		break;
+	default:
+		err = -ENODEV;
+	}
 
-out_unlock:
 	if (err)
 		dev_err(ice_pf_to_dev(pf), "PTP failed to set PHY port %d up, err %d\n",
 			port, err);
@@ -1436,6 +1479,7 @@ void ice_ptp_link_change(struct ice_pf *pf, u8 port, bool linkup)
 	case ICE_PHY_E810:
 		/* Do not reconfigure E810 PHY */
 		return;
+	case ICE_PHY_ETH56G:
 	case ICE_PHY_E82X:
 		ice_ptp_port_phy_restart(ptp_port);
 		return;
@@ -1465,6 +1509,22 @@ static int ice_ptp_cfg_phy_interrupt(struct ice_pf *pf, bool ena, u32 threshold)
 	ice_ptp_reset_ts_memory(hw);
 
 	switch (hw->ptp.phy_model) {
+	case ICE_PHY_ETH56G: {
+		int port;
+
+		for (port = 0; port < hw->ptp.num_lports; port++) {
+			int err;
+
+			err = ice_phy_cfg_intr_eth56g(hw, port, ena, threshold);
+			if (err) {
+				dev_err(dev, "Failed to configure PHY interrupt for port %d, err %d\n",
+					port, err);
+				return err;
+			}
+		}
+
+		return 0;
+	}
 	case ICE_PHY_E82X: {
 		int quad;
 
@@ -3075,6 +3135,9 @@ static int ice_ptp_init_port(struct ice_pf *pf, struct ice_ptp_port *ptp_port)
 	mutex_init(&ptp_port->ps_lock);
 
 	switch (hw->ptp.phy_model) {
+	case ICE_PHY_ETH56G:
+		return ice_ptp_init_tx_eth56g(pf, &ptp_port->tx,
+					      ptp_port->port_num);
 	case ICE_PHY_E810:
 		return ice_ptp_init_tx_e810(pf, &ptp_port->tx);
 	case ICE_PHY_E82X:

drivers/net/ethernet/intel/ice/ice_ptp.h

@@ -153,6 +153,7 @@ struct ice_ptp_tx {
 #define INDEX_PER_QUAD			64
 #define INDEX_PER_PORT_E82X		16
 #define INDEX_PER_PORT_E810		64
+#define INDEX_PER_PORT_ETH56G		64
 
 /**
  * struct ice_ptp_port - data used to initialize an external port for PTP

drivers/net/ethernet/intel/ice/ice_ptp_consts.h

@@ -9,6 +9,321 @@
  */
 /* Constants defined for the PTP 1588 clock hardware. */
 
+const struct ice_phy_reg_info_eth56g eth56g_phy_res[NUM_ETH56G_PHY_RES] = {
+	/* ETH56G_PHY_REG_PTP */
+	{
+		/* base_addr */
+		{
+			0x092000,
+			0x126000,
+			0x1BA000,
+			0x24E000,
+			0x2E2000,
+		},
+		/* step */
+		0x98,
+	},
+	/* ETH56G_PHY_MEM_PTP */
+	{
+		/* base_addr */
+		{
+			0x093000,
+			0x127000,
+			0x1BB000,
+			0x24F000,
+			0x2E3000,
+		},
+		/* step */
+		0x200,
+	},
+	/* ETH56G_PHY_REG_XPCS */
+	{
+		/* base_addr */
+		{
+			0x000000,
+			0x009400,
+			0x128000,
+			0x1BC000,
+			0x250000,
+		},
+		/* step */
+		0x21000,
+	},
+	/* ETH56G_PHY_REG_MAC */
+	{
+		/* base_addr */
+		{
+			0x085000,
+			0x119000,
+			0x1AD000,
+			0x241000,
+			0x2D5000,
+		},
+		/* step */
+		0x1000,
+	},
+	/* ETH56G_PHY_REG_GPCS */
+	{
+		/* base_addr */
+		{
+			0x084000,
+			0x118000,
+			0x1AC000,
+			0x240000,
+			0x2D4000,
+		},
+		/* step */
+		0x400,
+	},
+};
+
+const
+struct ice_eth56g_mac_reg_cfg eth56g_mac_cfg[NUM_ICE_ETH56G_LNK_SPD] = {
+	[ICE_ETH56G_LNK_SPD_1G] = {
+		.tx_mode = { .def = 6, },
+		.rx_mode = { .def = 6, },
+		.blks_per_clk = 1,
+		.blktime = 0x4000, /* 32 */
+		.tx_offset = {
+			.serdes = 0x6666, /* 51.2 */
+			.no_fec = 0xd066, /* 104.2 */
+			.sfd = 0x3000, /* 24 */
+			.onestep = 0x30000 /* 384 */
+		},
+		.rx_offset = {
+			.serdes = 0xffffc59a, /* -29.2 */
+			.no_fec = 0xffff0a80, /* -122.75 */
+			.sfd = 0x2c00, /* 22 */
+			.bs_ds = 0x19a /* 0.8 */
+			/* Dynamic bitslip 0 equals to 10 */
+		}
+	},
+	[ICE_ETH56G_LNK_SPD_2_5G] = {
+		.tx_mode = { .def = 6, },
+		.rx_mode = { .def = 6, },
+		.blks_per_clk = 1,
+		.blktime = 0x199a, /* 12.8 */
+		.tx_offset = {
+			.serdes = 0x28f6, /* 20.48 */
+			.no_fec = 0x53b8, /* 41.86 */
+			.sfd = 0x1333, /* 9.6 */
+			.onestep = 0x13333 /* 153.6 */
+		},
+		.rx_offset = {
+			.serdes = 0xffffe8a4, /* -11.68 */
+			.no_fec = 0xffff9a76, /* -50.77 */
+			.sfd = 0xf33, /* 7.6 */
+			.bs_ds = 0xa4 /* 0.32 */
+		}
+	},
+	[ICE_ETH56G_LNK_SPD_10G] = {
+		.tx_mode = { .def = 1, },
+		.rx_mode = { .def = 1, },
+		.blks_per_clk = 1,
+		.blktime = 0x666, /* 3.2 */
+		.tx_offset = {
+			.serdes = 0x234c, /* 17.6484848 */
+			.no_fec = 0x8e80, /* 71.25 */
+			.fc = 0xb4a4, /* 90.32 */
+			.sfd = 0x4a4, /* 2.32 */
+			.onestep = 0x4ccd /* 38.4 */
+		},
+		.rx_offset = {
+			.serdes = 0xffffeb27, /* -10.42424 */
+			.no_fec = 0xffffcccd, /* -25.6 */
+			.fc = 0xfffe0014, /* -255.96 */
+			.sfd = 0x4a4, /* 2.32 */
+			.bs_ds = 0x32 /* 0.0969697 */
+		}
+	},
+	[ICE_ETH56G_LNK_SPD_25G] = {
+		.tx_mode = {
+			.def = 1,
+			.rs = 4
+		},
+		.tx_mk_dly = 4,
+		.tx_cw_dly = {
+			.def = 1,
+			.onestep = 6
+		},
+		.rx_mode = {
+			.def = 1,
+			.rs = 4
+		},
+		.rx_mk_dly = {
+			.def = 1,
+			.rs = 1
+		},
+		.rx_cw_dly = {
+			.def = 1,
+			.rs = 1
+		},
+		.blks_per_clk = 1,
+		.blktime = 0x28f, /* 1.28 */
+		.mktime = 0x147b, /* 10.24, only if RS-FEC enabled */
+		.tx_offset = {
+			.serdes = 0xe1e, /* 7.0593939 */
+			.no_fec = 0x3857, /* 28.17 */
+			.fc = 0x48c3, /* 36.38 */
+			.rs = 0x8100, /* 64.5 */
+			.sfd = 0x1dc, /* 0.93 */
+			.onestep = 0x1eb8 /* 15.36 */
+		},
+		.rx_offset = {
+			.serdes = 0xfffff7a9, /* -4.1697 */
+			.no_fec = 0xffffe71a, /* -12.45 */
+			.fc = 0xfffe894d, /* -187.35 */
+			.rs = 0xfffff8cd, /* -3.6 */
+			.sfd = 0x1dc, /* 0.93 */
+			.bs_ds = 0x14 /* 0.0387879, RS-FEC 0 */
+		}
+	},
+	[ICE_ETH56G_LNK_SPD_40G] = {
+		.tx_mode = { .def = 3 },
+		.tx_mk_dly = 4,
+		.tx_cw_dly = {
+			.def = 1,
+			.onestep = 6
+		},
+		.rx_mode = { .def = 4 },
+		.rx_mk_dly = { .def = 1 },
+		.rx_cw_dly = { .def = 1 },
+		.blktime = 0x333, /* 1.6 */
+		.mktime = 0xccd, /* 6.4 */
+		.tx_offset = {
+			.serdes = 0x234c, /* 17.6484848 */
+			.no_fec = 0x5a8a, /* 45.27 */
+			.fc = 0x81b8, /* 64.86 */
+			.sfd = 0x4a4, /* 2.32 */
+			.onestep = 0x1333 /* 9.6 */
+		},
+		.rx_offset = {
+			.serdes = 0xffffeb27, /* -10.42424 */
+			.no_fec = 0xfffff594, /* -5.21 */
+			.fc = 0xfffe3080, /* -231.75 */
+			.sfd = 0x4a4, /* 2.32 */
+			.bs_ds = 0xccd /* 6.4 */
+		}
+	},
+	[ICE_ETH56G_LNK_SPD_50G] = {
+		.tx_mode = { .def = 5 },
+		.tx_mk_dly = 4,
+		.tx_cw_dly = {
+			.def = 1,
+			.onestep = 6
+		},
+		.rx_mode = { .def = 5 },
+		.rx_mk_dly = { .def = 1 },
+		.rx_cw_dly = { .def = 1 },
+		.blktime = 0x28f, /* 1.28 */
+		.mktime = 0xa3d, /* 5.12 */
+		.tx_offset = {
+			.serdes = 0x13ba, /* 9.86353 */
+			.rs = 0x5400, /* 42 */
+			.sfd = 0xe6, /* 0.45 */
+			.onestep = 0xf5c /* 7.68 */
+		},
+		.rx_offset = {
+			.serdes = 0xfffff7e8, /* -4.04706 */
+			.rs = 0xfffff994, /* -3.21 */
+			.sfd = 0xe6 /* 0.45 */
+		}
+	},
+	[ICE_ETH56G_LNK_SPD_50G2] = {
+		.tx_mode = {
+			.def = 3,
+			.rs = 2
+		},
+		.tx_mk_dly = 4,
+		.tx_cw_dly = {
+			.def = 1,
+			.onestep = 6
+		},
+		.rx_mode = {
+			.def = 4,
+			.rs = 1
+		},
+		.rx_mk_dly = { .def = 1 },
+		.rx_cw_dly = { .def = 1 },
+		.blktime = 0x28f, /* 1.28 */
+		.mktime = 0xa3d, /* 5.12 */
+		.tx_offset = {
+			.serdes = 0xe1e, /* 7.0593939 */
+			.no_fec = 0x3d33, /* 30.6 */
+			.rs = 0x5057, /* 40.17 */
+			.sfd = 0x1dc, /* 0.93 */
+			.onestep = 0xf5c /* 7.68 */
+		},
+		.rx_offset = {
+			.serdes = 0xfffff7a9, /* -4.1697 */
+			.no_fec = 0xfffff8cd, /* -3.6 */
+			.rs = 0xfffff21a, /* -6.95 */
+			.sfd = 0x1dc, /* 0.93 */
+			.bs_ds = 0xa3d /* 5.12, RS-FEC 0x633 (3.1) */
+		}
+	},
+	[ICE_ETH56G_LNK_SPD_100G] = {
+		.tx_mode = {
+			.def = 3,
+			.rs = 2
+		},
+		.tx_mk_dly = 10,
+		.tx_cw_dly = {
+			.def = 3,
+			.onestep = 6
+		},
+		.rx_mode = {
+			.def = 4,
+			.rs = 1
+		},
+		.rx_mk_dly = { .def = 5 },
+		.rx_cw_dly = { .def = 5 },
+		.blks_per_clk = 1,
+		.blktime = 0x148, /* 0.64 */
+		.mktime = 0x199a, /* 12.8 */
+		.tx_offset = {
+			.serdes = 0xe1e, /* 7.0593939 */
+			.no_fec = 0x67ec, /* 51.96 */
+			.rs = 0x44fb, /* 34.49 */
+			.sfd = 0x1dc, /* 0.93 */
+			.onestep = 0xf5c /* 7.68 */
+		},
+		.rx_offset = {
+			.serdes = 0xfffff7a9, /* -4.1697 */
+			.no_fec = 0xfffff5a9, /* -5.17 */
+			.rs = 0xfffff6e6, /* -4.55 */
+			.sfd = 0x1dc, /* 0.93 */
+			.bs_ds = 0x199a /* 12.8, RS-FEC 0x31b (1.552) */
+		}
+	},
+	[ICE_ETH56G_LNK_SPD_100G2] = {
+		.tx_mode = { .def = 5 },
+		.tx_mk_dly = 10,
+		.tx_cw_dly = {
+			.def = 3,
+			.onestep = 6
+		},
+		.rx_mode = { .def = 5 },
+		.rx_mk_dly = { .def = 5 },
+		.rx_cw_dly = { .def = 5 },
+		.blks_per_clk = 1,
+		.blktime = 0x148, /* 0.64 */
+		.mktime = 0x199a, /* 12.8 */
+		.tx_offset = {
+			.serdes = 0x13ba, /* 9.86353 */
+			.rs = 0x460a, /* 35.02 */
+			.sfd = 0xe6, /* 0.45 */
+			.onestep = 0xf5c /* 7.68 */
+		},
+		.rx_offset = {
+			.serdes = 0xfffff7e8, /* -4.04706 */
+			.rs = 0xfffff548, /* -5.36 */
+			.sfd = 0xe6, /* 0.45 */
+			.bs_ds = 0x303 /* 1.506 */
+		}
+	}
+};
+
 /* struct ice_time_ref_info_e82x
  *
  * E822 hardware can use different sources as the reference for the PTP

drivers/net/ethernet/intel/ice/ice_ptp_hw.h

@@ -41,6 +41,41 @@ enum ice_ptp_fec_mode {
 	ICE_PTP_FEC_MODE_RS_FEC
 };
 
+enum eth56g_res_type {
+	ETH56G_PHY_REG_PTP,
+	ETH56G_PHY_MEM_PTP,
+	ETH56G_PHY_REG_XPCS,
+	ETH56G_PHY_REG_MAC,
+	ETH56G_PHY_REG_GPCS,
+	NUM_ETH56G_PHY_RES
+};
+
+enum ice_eth56g_link_spd {
+	ICE_ETH56G_LNK_SPD_1G,
+	ICE_ETH56G_LNK_SPD_2_5G,
+	ICE_ETH56G_LNK_SPD_10G,
+	ICE_ETH56G_LNK_SPD_25G,
+	ICE_ETH56G_LNK_SPD_40G,
+	ICE_ETH56G_LNK_SPD_50G,
+	ICE_ETH56G_LNK_SPD_50G2,
+	ICE_ETH56G_LNK_SPD_100G,
+	ICE_ETH56G_LNK_SPD_100G2,
+	NUM_ICE_ETH56G_LNK_SPD /* Must be last */
+};
+
+/**
+ * struct ice_phy_reg_info_eth56g - ETH56G PHY register parameters
+ * @base: base address for each PHY block
+ * @step: step between PHY lanes
+ *
+ * Characteristic information for the various PHY register parameters in the
+ * ETH56G devices
+ */
+struct ice_phy_reg_info_eth56g {
+	u32 base[NUM_ETH56G_PHY_RES];
+	u32 step;
+};
+
 /**
  * struct ice_time_ref_info_e82x
  * @pll_freq: Frequency of PLL that drives timer ticks in Hz
@@ -94,6 +129,73 @@ struct ice_vernier_info_e82x {
 	u32 rx_fixed_delay;
 };
 
+#define ICE_ETH56G_MAC_CFG_RX_OFFSET_INT	GENMASK(19, 9)
+#define ICE_ETH56G_MAC_CFG_RX_OFFSET_FRAC	GENMASK(8, 0)
+#define ICE_ETH56G_MAC_CFG_FRAC_W		9
+/**
+ * struct ice_eth56g_mac_reg_cfg - MAC config values for specific PTP registers
+ * @tx_mode: Tx timestamp compensation mode
+ * @tx_mk_dly: Tx timestamp marker start strobe delay
+ * @tx_cw_dly: Tx timestamp codeword start strobe delay
+ * @rx_mode: Rx timestamp compensation mode
+ * @rx_mk_dly: Rx timestamp marker start strobe delay
+ * @rx_cw_dly: Rx timestamp codeword start strobe delay
+ * @blks_per_clk: number of blocks transferred per clock cycle
+ * @blktime: block time, fixed point
+ * @mktime: marker time, fixed point
+ * @tx_offset: total Tx offset, fixed point
+ * @rx_offset: total Rx offset, contains value for bitslip/deskew, fixed point
+ *
+ * All fixed point registers except Rx offset are 23 bit unsigned ints with
+ * a 9 bit fractional.
+ * Rx offset is 11 bit unsigned int with a 9 bit fractional.
+ */
+struct ice_eth56g_mac_reg_cfg {
+	struct {
+		u8 def;
+		u8 rs;
+	} tx_mode;
+	u8 tx_mk_dly;
+	struct {
+		u8 def;
+		u8 onestep;
+	} tx_cw_dly;
+	struct {
+		u8 def;
+		u8 rs;
+	} rx_mode;
+	struct {
+		u8 def;
+		u8 rs;
+	} rx_mk_dly;
+	struct {
+		u8 def;
+		u8 rs;
+	} rx_cw_dly;
+	u8 blks_per_clk;
+	u16 blktime;
+	u16 mktime;
+	struct {
+		u32 serdes;
+		u32 no_fec;
+		u32 fc;
+		u32 rs;
+		u32 sfd;
+		u32 onestep;
+	} tx_offset;
+	struct {
+		u32 serdes;
+		u32 no_fec;
+		u32 fc;
+		u32 rs;
+		u32 sfd;
+		u32 bs_ds;
+	} rx_offset;
+};
+
+extern
+const struct ice_eth56g_mac_reg_cfg eth56g_mac_cfg[NUM_ICE_ETH56G_LNK_SPD];
+
 /**
  * struct ice_cgu_pll_params_e82x
  * @refclk_pre_div: Reference clock pre-divisor
@@ -188,6 +290,9 @@ ice_cgu_pll_params_e82x e822_cgu_params[NUM_ICE_TIME_REF_FREQ];
 #define E810C_QSFP_C827_0_HANDLE 2
 #define E810C_QSFP_C827_1_HANDLE 3
 
+/* Table of constants related to possible ETH56G PHY resources */
+extern const struct ice_phy_reg_info_eth56g eth56g_phy_res[NUM_ETH56G_PHY_RES];
+
 /* Table of constants related to possible TIME_REF sources */
 extern const struct ice_time_ref_info_e82x e822_time_ref[NUM_ICE_TIME_REF_FREQ];
 
@@ -197,7 +302,9 @@ extern const struct ice_vernier_info_e82x e822_vernier[NUM_ICE_PTP_LNK_SPD];
 /* Increment value to generate nanoseconds in the GLTSYN_TIME_L register for
  * the E810 devices. Based off of a PLL with an 812.5 MHz frequency.
  */
-#define ICE_PTP_NOMINAL_INCVAL_E810 0x13b13b13bULL
+#define ICE_E810_PLL_FREQ		812500000
+#define ICE_PTP_NOMINAL_INCVAL_E810	0x13b13b13bULL
+#define E810_OUT_PROP_DELAY_NS 1
 
 /* Device agnostic functions */
 u8 ice_get_ptp_src_clock_index(struct ice_hw *hw);
@@ -215,6 +322,8 @@ void ice_ptp_reset_ts_memory(struct ice_hw *hw);
 int ice_ptp_init_phc(struct ice_hw *hw);
 void ice_ptp_init_hw(struct ice_hw *hw);
 int ice_get_phy_tx_tstamp_ready(struct ice_hw *hw, u8 block, u64 *tstamp_ready);
+int ice_ptp_one_port_cmd(struct ice_hw *hw, u8 configured_port,
+			 enum ice_ptp_tmr_cmd configured_cmd);
 
 /* E822 family functions */
 int ice_read_quad_reg_e82x(struct ice_hw *hw, u8 quad, u16 offset, u32 *val);
@@ -285,6 +394,21 @@ int ice_get_cgu_rclk_pin_info(struct ice_hw *hw, u8 *base_idx, u8 *pin_num);
 int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id,
 				      unsigned long *caps);
 
+/* ETH56G family functions */
+int ice_ptp_read_tx_hwtstamp_status_eth56g(struct ice_hw *hw, u32 *ts_status);
+int ice_stop_phy_timer_eth56g(struct ice_hw *hw, u8 port, bool soft_reset);
+int ice_start_phy_timer_eth56g(struct ice_hw *hw, u8 port);
+int ice_phy_cfg_tx_offset_eth56g(struct ice_hw *hw, u8 port);
+int ice_phy_cfg_rx_offset_eth56g(struct ice_hw *hw, u8 port);
+int ice_phy_cfg_intr_eth56g(struct ice_hw *hw, u8 port, bool ena, u8 threshold);
+int ice_phy_cfg_ptp_1step_eth56g(struct ice_hw *hw, u8 port);
+
+#define ICE_ETH56G_NOMINAL_INCVAL	0x140000000ULL
+#define ICE_ETH56G_NOMINAL_PCS_REF_TUS	0x100000000ULL
+#define ICE_ETH56G_NOMINAL_PCS_REF_INC	0x300000000ULL
+#define ICE_ETH56G_NOMINAL_THRESH4	0x7777
+#define ICE_ETH56G_NOMINAL_TX_THRESH	0x6
+
 /**
  * ice_get_base_incval - Get base clock increment value
  * @hw: pointer to the HW struct
@@ -294,6 +418,8 @@ int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id,
 static inline u64 ice_get_base_incval(struct ice_hw *hw)
 {
 	switch (hw->ptp.phy_model) {
+	case ICE_PHY_ETH56G:
+		return ICE_ETH56G_NOMINAL_INCVAL;
 	case ICE_PHY_E810:
 		return ICE_PTP_NOMINAL_INCVAL_E810;
 	case ICE_PHY_E82X:
@@ -330,6 +456,7 @@ static inline u64 ice_get_base_incval(struct ice_hw *hw)
 #define TS_CMD_MASK_E810		0xFF
 #define TS_CMD_MASK			0xF
 #define SYNC_EXEC_CMD			0x3
+#define TS_CMD_RX_TYPE			ICE_M(0x18, 0x4)
 
 /* Macros to derive port low and high addresses on both quads */
 #define P_Q0_L(a, p) ((((a) + (0x2000 * (p)))) & 0xFFFF)
@@ -564,4 +691,115 @@ static inline u64 ice_get_base_incval(struct ice_hw *hw)
 /* E810T PCA9575 IO controller pin control */
 #define ICE_E810T_P0_GNSS_PRSNT_N	BIT(4)
 
+/* ETH56G PHY register addresses */
+/* Timestamp PHY incval registers */
+#define PHY_REG_TIMETUS_L		0x8
+#define PHY_REG_TIMETUS_U		0xC
+
+/* Timestamp PCS registers */
+#define PHY_PCS_REF_TUS_L		0x18
+#define PHY_PCS_REF_TUS_U		0x1C
+
+/* Timestamp PCS ref incval registers */
+#define PHY_PCS_REF_INC_L		0x20
+#define PHY_PCS_REF_INC_U		0x24
+
+/* Timestamp init registers */
+#define PHY_REG_RX_TIMER_INC_PRE_L	0x64
+#define PHY_REG_RX_TIMER_INC_PRE_U	0x68
+#define PHY_REG_TX_TIMER_INC_PRE_L	0x44
+#define PHY_REG_TX_TIMER_INC_PRE_U	0x48
+
+/* Timestamp match and adjust target registers */
+#define PHY_REG_RX_TIMER_CNT_ADJ_L	0x6C
+#define PHY_REG_RX_TIMER_CNT_ADJ_U	0x70
+#define PHY_REG_TX_TIMER_CNT_ADJ_L	0x4C
+#define PHY_REG_TX_TIMER_CNT_ADJ_U	0x50
+
+/* Timestamp command registers */
+#define PHY_REG_TX_TMR_CMD		0x40
+#define PHY_REG_RX_TMR_CMD		0x60
+
+/* Phy offset ready registers */
+#define PHY_REG_TX_OFFSET_READY		0x54
+#define PHY_REG_RX_OFFSET_READY		0x74
+
+/* Phy total offset registers */
+#define PHY_REG_TOTAL_TX_OFFSET_L	0x38
+#define PHY_REG_TOTAL_TX_OFFSET_U	0x3C
+#define PHY_REG_TOTAL_RX_OFFSET_L	0x58
+#define PHY_REG_TOTAL_RX_OFFSET_U	0x5C
+
+/* Timestamp capture registers */
+#define PHY_REG_TX_CAPTURE_L		0x78
+#define PHY_REG_TX_CAPTURE_U		0x7C
+#define PHY_REG_RX_CAPTURE_L		0x8C
+#define PHY_REG_RX_CAPTURE_U		0x90
+
+/* Memory status registers */
+#define PHY_REG_TX_MEMORY_STATUS_L	0x80
+#define PHY_REG_TX_MEMORY_STATUS_U	0x84
+
+/* Interrupt config register */
+#define PHY_REG_TS_INT_CONFIG		0x88
+
+/* XIF mode config register */
+#define PHY_MAC_XIF_MODE		0x24
+#define PHY_MAC_XIF_1STEP_ENA_M		ICE_M(0x1, 5)
+#define PHY_MAC_XIF_TS_BIN_MODE_M	ICE_M(0x1, 11)
+#define PHY_MAC_XIF_TS_SFD_ENA_M	ICE_M(0x1, 20)
+#define PHY_MAC_XIF_GMII_TS_SEL_M	ICE_M(0x1, 21)
+
+/* GPCS config register */
+#define PHY_GPCS_CONFIG_REG0		0x268
+#define PHY_GPCS_CONFIG_REG0_TX_THR_M	ICE_M(0xF, 24)
+#define PHY_GPCS_BITSLIP		0x5C
+
+#define PHY_TS_INT_CONFIG_THRESHOLD_M	ICE_M(0x3F, 0)
+#define PHY_TS_INT_CONFIG_ENA_M		BIT(6)
+
+/* 1-step PTP config */
+#define PHY_PTP_1STEP_CONFIG		0x270
+#define PHY_PTP_1STEP_T1S_UP64_M	ICE_M(0xF, 4)
+#define PHY_PTP_1STEP_T1S_DELTA_M	ICE_M(0xF, 8)
+#define PHY_PTP_1STEP_PEER_DELAY(_port)	(0x274 + 4 * (_port))
+#define PHY_PTP_1STEP_PD_ADD_PD_M	ICE_M(0x1, 0)
+#define PHY_PTP_1STEP_PD_DELAY_M	ICE_M(0x3fffffff, 1)
+#define PHY_PTP_1STEP_PD_DLY_V_M	ICE_M(0x1, 31)
+
+/* Macros to derive offsets for TimeStampLow and TimeStampHigh */
+#define PHY_TSTAMP_L(x) (((x) * 8) + 0)
+#define PHY_TSTAMP_U(x) (((x) * 8) + 4)
+
+#define PHY_REG_REVISION		0x85000
+
+#define PHY_REG_DESKEW_0		0x94
+#define PHY_REG_DESKEW_0_RLEVEL		GENMASK(6, 0)
+#define PHY_REG_DESKEW_0_RLEVEL_FRAC	GENMASK(9, 7)
+#define PHY_REG_DESKEW_0_RLEVEL_FRAC_W	3
+#define PHY_REG_DESKEW_0_VALID		GENMASK(10, 10)
+
+#define PHY_REG_GPCS_BITSLIP		0x5C
+#define PHY_REG_SD_BIT_SLIP(_port_offset)	(0x29C + 4 * (_port_offset))
+#define PHY_REVISION_ETH56G		0x10200
+#define PHY_VENDOR_TXLANE_THRESH	0x2000C
+
+#define PHY_MAC_TSU_CONFIG		0x40
+#define PHY_MAC_TSU_CFG_RX_MODE_M	ICE_M(0x7, 0)
+#define PHY_MAC_TSU_CFG_RX_MII_CW_DLY_M	ICE_M(0x7, 4)
+#define PHY_MAC_TSU_CFG_RX_MII_MK_DLY_M	ICE_M(0x7, 8)
+#define PHY_MAC_TSU_CFG_TX_MODE_M	ICE_M(0x7, 12)
+#define PHY_MAC_TSU_CFG_TX_MII_CW_DLY_M	ICE_M(0x1F, 16)
+#define PHY_MAC_TSU_CFG_TX_MII_MK_DLY_M	ICE_M(0x1F, 21)
+#define PHY_MAC_TSU_CFG_BLKS_PER_CLK_M	ICE_M(0x1, 28)
+#define PHY_MAC_RX_MODULO		0x44
+#define PHY_MAC_RX_OFFSET		0x48
+#define PHY_MAC_RX_OFFSET_M		ICE_M(0xFFFFFF, 0)
+#define PHY_MAC_TX_MODULO		0x4C
+#define PHY_MAC_BLOCKTIME		0x50
+#define PHY_MAC_MARKERTIME		0x54
+#define PHY_MAC_TX_OFFSET		0x58
+
+#define PHY_PTP_INT_STATUS		0x7FD140
+
 #endif /* _ICE_PTP_HW_H_ */

drivers/net/ethernet/intel/ice/ice_sbq_cmd.h

@@ -47,10 +47,12 @@ struct ice_sbq_evt_desc {
 };
 
 enum ice_sbq_msg_dev {
-	rmn_0	= 0x02,
+	eth56g_phy_0	= 0x02,
-	rmn_1	= 0x03,
+	rmn_0		= 0x02,
-	rmn_2	= 0x04,
+	rmn_1		= 0x03,
-	cgu	= 0x06
+	rmn_2		= 0x04,
+	cgu		= 0x06,
+	eth56g_phy_1	= 0x0D,
 };
 
 enum ice_sbq_msg_opcode {

drivers/net/ethernet/intel/ice/ice_type.h

@@ -322,7 +322,9 @@ enum ice_time_ref_freq {
 	ICE_TIME_REF_FREQ_156_250	= 4,
 	ICE_TIME_REF_FREQ_245_760	= 5,
 
-	NUM_ICE_TIME_REF_FREQ
+	NUM_ICE_TIME_REF_FREQ,
+
+	ICE_TIME_REF_FREQ_INVALID	= -1,
 };
 
 /* Clock source specification */
@@ -821,15 +823,29 @@ struct ice_mbx_data {
 #define ICE_PORTS_PER_QUAD	4
 #define ICE_GET_QUAD_NUM(port) ((port) / ICE_PORTS_PER_QUAD)
 
+struct ice_eth56g_params {
+	u8 num_phys;
+	u8 phy_addr[2];
+	bool onestep_ena;
+	bool sfd_ena;
+	u32 peer_delay;
+};
+
+union ice_phy_params {
+	struct ice_eth56g_params eth56g;
+};
+
 /* PHY model */
 enum ice_phy_model {
 	ICE_PHY_UNSUP = -1,
-	ICE_PHY_E810  = 1,
+	ICE_PHY_E810 = 1,
 	ICE_PHY_E82X,
+	ICE_PHY_ETH56G,
 };
 
 struct ice_ptp_hw {
 	enum ice_phy_model phy_model;
+	union ice_phy_params phy;
 	u8 num_lports;
 	u8 ports_per_phy;
 };