dt-bindings: thermal: tsens: Convert over to a yaml schema
Older IP only supports the 'uplow' interrupt, but newer IP supports 'uplow' and 'critical' interrupts. Document interrupt support in the tsens driver by converting over to a YAML schema. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/d519be4c7198f47c3661f7326d1a724b97dc4973.1572526427.git.amit.kucheria@linaro.org
This commit is contained in:
Amit Kucheria
Daniel Lezcano
parent
7c938f4837
commit
a877e768f6
3 changed files with 169 additions and 55 deletions
|
|
@ -1,55 +0,0 @@
|
||||||
* QCOM SoC Temperature Sensor (TSENS)
|
|
||||||
|
|
||||||
Required properties:
|
|
||||||
- compatible:
|
|
||||||
Must be one of the following:
|
|
||||||
- "qcom,msm8916-tsens" (MSM8916)
|
|
||||||
- "qcom,msm8974-tsens" (MSM8974)
|
|
||||||
- "qcom,msm8996-tsens" (MSM8996)
|
|
||||||
- "qcom,qcs404-tsens", "qcom,tsens-v1" (QCS404)
|
|
||||||
- "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
|
|
||||||
- "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
|
|
||||||
The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
|
|
||||||
with version 2 of the TSENS IP. MSM8996 is the only exception because the
|
|
||||||
generic property did not exist when support was added.
|
|
||||||
Similarly, the generic "qcom,tsens-v1" property must be used as a fallback for
|
|
||||||
any SoC with version 1 of the TSENS IP.
|
|
||||||
|
|
||||||
- reg: Address range of the thermal registers.
|
|
||||||
New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM
|
|
||||||
register spaces separately, with order being TM before SROT.
|
|
||||||
See Example 2, below.
|
|
||||||
|
|
||||||
- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
|
|
||||||
- #qcom,sensors: Number of sensors in tsens block
|
|
||||||
- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
|
|
||||||
nvmem cells
|
|
||||||
|
|
||||||
Example 1 (legacy support before a fallback tsens-v2 property was introduced):
|
|
||||||
tsens: thermal-sensor@900000 {
|
|
||||||
compatible = "qcom,msm8916-tsens";
|
|
||||||
reg = <0x4a8000 0x2000>;
|
|
||||||
nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
|
|
||||||
nvmem-cell-names = "caldata", "calsel";
|
|
||||||
#thermal-sensor-cells = <1>;
|
|
||||||
};
|
|
||||||
|
|
||||||
Example 2 (for any platform containing v2 of the TSENS IP):
|
|
||||||
tsens0: thermal-sensor@c263000 {
|
|
||||||
compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
|
|
||||||
reg = <0xc263000 0x1ff>, /* TM */
|
|
||||||
<0xc222000 0x1ff>; /* SROT */
|
|
||||||
#qcom,sensors = <13>;
|
|
||||||
#thermal-sensor-cells = <1>;
|
|
||||||
};
|
|
||||||
|
|
||||||
Example 3 (for any platform containing v1 of the TSENS IP):
|
|
||||||
tsens: thermal-sensor@4a9000 {
|
|
||||||
compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
|
|
||||||
reg = <0x004a9000 0x1000>, /* TM */
|
|
||||||
<0x004a8000 0x1000>; /* SROT */
|
|
||||||
nvmem-cells = <&tsens_caldata>;
|
|
||||||
nvmem-cell-names = "calib";
|
|
||||||
#qcom,sensors = <10>;
|
|
||||||
#thermal-sensor-cells = <1>;
|
|
||||||
};
|
|
||||||
168
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
Normal file
168
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
Normal file
|
|
@ -0,0 +1,168 @@
|
||||||
|
# SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||||
|
# Copyright 2019 Linaro Ltd.
|
||||||
|
%YAML 1.2
|
||||||
|
---
|
||||||
|
$id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml#
|
||||||
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
|
||||||
|
title: QCOM SoC Temperature Sensor (TSENS)
|
||||||
|
|
||||||
|
maintainers:
|
||||||
|
- Amit Kucheria <amit.kucheria@linaro.org>
|
||||||
|
|
||||||
|
description: |
|
||||||
|
QCOM SoCs have TSENS IP to allow temperature measurement. There are currently
|
||||||
|
three distinct major versions of the IP that is supported by a single driver.
|
||||||
|
The IP versions are named v0.1, v1 and v2 in the driver, where v0.1 captures
|
||||||
|
everything before v1 when there was no versioning information.
|
||||||
|
|
||||||
|
properties:
|
||||||
|
compatible:
|
||||||
|
oneOf:
|
||||||
|
- description: v0.1 of TSENS
|
||||||
|
items:
|
||||||
|
- enum:
|
||||||
|
- qcom,msm8916-tsens
|
||||||
|
- qcom,msm8974-tsens
|
||||||
|
- const: qcom,tsens-v0_1
|
||||||
|
|
||||||
|
- description: v1 of TSENS
|
||||||
|
items:
|
||||||
|
- enum:
|
||||||
|
- qcom,qcs404-tsens
|
||||||
|
- const: qcom,tsens-v1
|
||||||
|
|
||||||
|
- description: v2 of TSENS
|
||||||
|
items:
|
||||||
|
- enum:
|
||||||
|
- qcom,msm8996-tsens
|
||||||
|
- qcom,msm8998-tsens
|
||||||
|
- qcom,sdm845-tsens
|
||||||
|
- const: qcom,tsens-v2
|
||||||
|
|
||||||
|
reg:
|
||||||
|
maxItems: 2
|
||||||
|
items:
|
||||||
|
- description: TM registers
|
||||||
|
- description: SROT registers
|
||||||
|
|
||||||
|
nvmem-cells:
|
||||||
|
minItems: 1
|
||||||
|
maxItems: 2
|
||||||
|
description:
|
||||||
|
Reference to an nvmem node for the calibration data
|
||||||
|
|
||||||
|
nvmem-cells-names:
|
||||||
|
minItems: 1
|
||||||
|
maxItems: 2
|
||||||
|
items:
|
||||||
|
- enum:
|
||||||
|
- caldata
|
||||||
|
- calsel
|
||||||
|
|
||||||
|
"#qcom,sensors":
|
||||||
|
allOf:
|
||||||
|
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
- minimum: 1
|
||||||
|
- maximum: 16
|
||||||
|
description:
|
||||||
|
Number of sensors enabled on this platform
|
||||||
|
|
||||||
|
"#thermal-sensor-cells":
|
||||||
|
const: 1
|
||||||
|
description:
|
||||||
|
Number of cells required to uniquely identify the thermal sensors. Since
|
||||||
|
we have multiple sensors this is set to 1
|
||||||
|
|
||||||
|
allOf:
|
||||||
|
- if:
|
||||||
|
properties:
|
||||||
|
compatible:
|
||||||
|
contains:
|
||||||
|
enum:
|
||||||
|
- qcom,msm8916-tsens
|
||||||
|
- qcom,msm8974-tsens
|
||||||
|
- qcom,qcs404-tsens
|
||||||
|
- qcom,tsens-v0_1
|
||||||
|
- qcom,tsens-v1
|
||||||
|
then:
|
||||||
|
properties:
|
||||||
|
interrupts:
|
||||||
|
items:
|
||||||
|
- description: Combined interrupt if upper or lower threshold crossed
|
||||||
|
interrupt-names:
|
||||||
|
items:
|
||||||
|
- const: uplow
|
||||||
|
|
||||||
|
else:
|
||||||
|
properties:
|
||||||
|
interrupts:
|
||||||
|
items:
|
||||||
|
- description: Combined interrupt if upper or lower threshold crossed
|
||||||
|
- description: Interrupt if critical threshold crossed
|
||||||
|
interrupt-names:
|
||||||
|
items:
|
||||||
|
- const: uplow
|
||||||
|
- const: critical
|
||||||
|
|
||||||
|
required:
|
||||||
|
- compatible
|
||||||
|
- reg
|
||||||
|
- "#qcom,sensors"
|
||||||
|
- interrupts
|
||||||
|
- interrupt-names
|
||||||
|
- "#thermal-sensor-cells"
|
||||||
|
|
||||||
|
examples:
|
||||||
|
- |
|
||||||
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||||
|
// Example 1 (legacy: for pre v1 IP):
|
||||||
|
tsens1: thermal-sensor@900000 {
|
||||||
|
compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
|
||||||
|
reg = <0x4a9000 0x1000>, /* TM */
|
||||||
|
<0x4a8000 0x1000>; /* SROT */
|
||||||
|
|
||||||
|
nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
|
||||||
|
nvmem-cell-names = "caldata", "calsel";
|
||||||
|
|
||||||
|
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
interrupt-names = "uplow";
|
||||||
|
|
||||||
|
#qcom,sensors = <5>;
|
||||||
|
#thermal-sensor-cells = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
- |
|
||||||
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||||
|
// Example 2 (for any platform containing v1 of the TSENS IP):
|
||||||
|
tsens2: thermal-sensor@4a9000 {
|
||||||
|
compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
|
||||||
|
reg = <0x004a9000 0x1000>, /* TM */
|
||||||
|
<0x004a8000 0x1000>; /* SROT */
|
||||||
|
|
||||||
|
nvmem-cells = <&tsens_caldata>;
|
||||||
|
nvmem-cell-names = "calib";
|
||||||
|
|
||||||
|
interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
interrupt-names = "uplow";
|
||||||
|
|
||||||
|
#qcom,sensors = <10>;
|
||||||
|
#thermal-sensor-cells = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
- |
|
||||||
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||||
|
// Example 3 (for any platform containing v2 of the TSENS IP):
|
||||||
|
tsens3: thermal-sensor@c263000 {
|
||||||
|
compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
|
||||||
|
reg = <0xc263000 0x1ff>,
|
||||||
|
<0xc222000 0x1ff>;
|
||||||
|
|
||||||
|
interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
|
||||||
|
<GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
interrupt-names = "uplow", "critical";
|
||||||
|
|
||||||
|
#qcom,sensors = <13>;
|
||||||
|
#thermal-sensor-cells = <1>;
|
||||||
|
};
|
||||||
|
...
|
||||||
|
|
@ -13516,6 +13516,7 @@ L: linux-pm@vger.kernel.org
|
||||||
L: linux-arm-msm@vger.kernel.org
|
L: linux-arm-msm@vger.kernel.org
|
||||||
S: Maintained
|
S: Maintained
|
||||||
F: drivers/thermal/qcom/
|
F: drivers/thermal/qcom/
|
||||||
|
F: Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
|
||||||
|
|
||||||
QUALCOMM VENUS VIDEO ACCELERATOR DRIVER
|
QUALCOMM VENUS VIDEO ACCELERATOR DRIVER
|
||||||
M: Stanimir Varbanov <stanimir.varbanov@linaro.org>
|
M: Stanimir Varbanov <stanimir.varbanov@linaro.org>
|
||||||
|
|
|
||||||
Loading…
Add table
Reference in a new issue