drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts
Why: Setting IH_RB_WPTR register to 0 will not clear the RB_OVERFLOW bit if RB_ENABLE is not set. How to fix: Set WPTR_OVERFLOW_CLEAR bit after RB_ENABLE bit is set. The RB_ENABLE bit is required to be set, together with WPTR_OVERFLOW_ENABLE bit so that setting WPTR_OVERFLOW_CLEAR bit would clear the RB_OVERFLOW. Signed-off-by: Danijel Slivka <danijel.slivka@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit is contained in:
parent
bf826ba9b4
commit
afbf7955ff
1 changed files with 28 additions and 0 deletions
|
@ -135,6 +135,34 @@ static int ih_v6_0_toggle_ring_interrupts(struct amdgpu_device *adev,
|
|||
|
||||
tmp = RREG32(ih_regs->ih_rb_cntl);
|
||||
tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, RB_ENABLE, (enable ? 1 : 0));
|
||||
|
||||
if (enable) {
|
||||
/* Unset the CLEAR_OVERFLOW bit to make sure the next step
|
||||
* is switching the bit from 0 to 1
|
||||
*/
|
||||
tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 0);
|
||||
if (amdgpu_sriov_vf(adev) && amdgpu_sriov_reg_indirect_ih(adev)) {
|
||||
if (psp_reg_program(&adev->psp, ih_regs->psp_reg_id, tmp))
|
||||
return -ETIMEDOUT;
|
||||
} else {
|
||||
WREG32_NO_KIQ(ih_regs->ih_rb_cntl, tmp);
|
||||
}
|
||||
|
||||
/* Clear RB_OVERFLOW bit */
|
||||
tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 1);
|
||||
if (amdgpu_sriov_vf(adev) && amdgpu_sriov_reg_indirect_ih(adev)) {
|
||||
if (psp_reg_program(&adev->psp, ih_regs->psp_reg_id, tmp))
|
||||
return -ETIMEDOUT;
|
||||
} else {
|
||||
WREG32_NO_KIQ(ih_regs->ih_rb_cntl, tmp);
|
||||
}
|
||||
|
||||
/* Unset the CLEAR_OVERFLOW bit immediately so new overflows
|
||||
* can be detected.
|
||||
*/
|
||||
tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_CLEAR, 0);
|
||||
}
|
||||
|
||||
/* enable_intr field is only valid in ring0 */
|
||||
if (ih == &adev->irq.ih)
|
||||
tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, ENABLE_INTR, (enable ? 1 : 0));
|
||||
|
|
Loading…
Add table
Reference in a new issue