Incorrectly handled transaction restarts can be a source of heisenbugs;
add a mode where we randomly inject them to shake them out.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If a block device (e.g. your typical consumer SSD) is taking multiple
seconds for IOs (typically flushes), we don't want to emit the "journal
stuck" message prematurely.
Also, make sure to drop the btree_trans srcu lock if we're blocking for
more than a second.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
New helper for dropping all write locks; which is distinct from the
helper the transaction commit path uses, which is faster and only
touches updates.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This breaks when the trigger is inserting updates for the same btree, as
the inode trigger now does.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This lets us print the exact location in the journal if it was found in
the journal, or correctly print if it was found in the superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new parameter to bkey validate functions, and use it to improve
invalid bkey error messages: we can now print the btree and depth it
came from, or if it came from the journal, or is a btree root.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We unconditionally go read-write, if we're going to do so, before
journal replay: lazy_rw is obsolete.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The journal replay keys mechanism can only be used for updates in early
recovery, when still single threaded.
Add some asserts to make sure we never accidentally use it elsewhere.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also, fix a minor bug in the revert path, where we weren't checking the
journal entry type correctly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We only are applying JSET_ENTRY_TYPE_write_buffer_keys, revert path was
missed.
Fixes: a3581ca35d ("bcachefs: Fix BCH_TRANS_COMMIT_skip_accounting_apply")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This was added to avoid double-counting accounting keys in journal
replay. But applied incorrectly (easily done since it applies to the
transaction commit, not a particular update), it leads to skipping
in-mem accounting for real accounting updates, and failure to give them
a version number - which leads to journal replay becoming very confused
the next time around.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In order to check for accounting keys with version=0, we need to run
validation after they've been assigned version numbers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Minor refactoring - replace multiple bool arguments with an enum; prep
work for fixing a bug in accounting read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The next patch will be adding a disk accounting counter type which is
not kept in the in-memory eytzinger tree.
As prep, fold __bch2_accounting_mem_mod() into
bch2_accounting_mem_mod_locked() so that we can check for that counter
type and bail out without calling bpos_to_disk_accounting_pos() twice.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bkey_fsck_err() was added as an interface that looks like fsck_err(),
but previously all it did was ensure that the appropriate error counter
was incremented in the superblock.
This is a cleanup and bugfix patch that converts it to a wrapper around
fsck_err(). This is needed to fix an issue with the upgrade path to
disk_accounting_v3, where the "silent fix" error list now includes
bkey_fsck errors; fsck_err() handles this in a unified way, and since we
need to change printing of bkey fsck errors from the caller to the inner
bkey_fsck_err() calls, this ends up being a pretty big change.
Als,, rename .invalid() methods to .validate(), for clarity, while we're
changing the function signature anyways (to drop the printbuf argument).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This helps ensure key cache reclaim isn't contending with threads
waiting for the key cache to be helped, and fixes a severe performance
bug.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Make things more consistent and ensure that we're using u64 bitfields -
key types and btree ids are already around 32 bits.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
the order in which btree_gc walks keys have changed, so we no longer
have the sort of issues with online fsck this assertion was warning
about.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Rewrite fsck/gc for the new accounting scheme.
This adds a second set of in-memory accounting counters for gc to use;
like with other parts of gc we run all trigger in TRIGGER_GC mode, then
compare what we calculated to existing in-memory accounting at the end.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Main part of the disk accounting rewrite.
This is a wholesale rewrite of the existing disk space accounting, which
relies on percepu counters that are sharded by journal buffer, and
rolled up and added to each journal write.
With the new scheme, every set of counters is a distinct key in the
accounting btree; this fixes scaling limitations of the old scheme,
where counters took up space in each journal entry and required multiple
percpu counters.
Now, in memory accounting requires a single set of percpu counters - not
multiple for each in flight journal buffer - and in the future we'll
probably also have counters that don't use in memory percpu counters,
they're not strictly required.
An accounting update is now a normal btree update, using the btree write
buffer path. At transaction commit time, we apply accounting updates to
the in memory counters, which are percpu counters indexed in an
eytzinger tree by the accounting key.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Until accounting keys hit the btree, they are deltas, not new versions
of the existing key; this means we have to teach journal replay to
accumulate them.
Additionally, the journal doesn't track precisely which entries have
been flushed to the btree; it only tracks a range of entries that may
possibly still need to be flushed.
That means we need to compare accounting keys against the version in the
btree and only flush updates that are newer.
There's another wrinkle with the write buffer: if the write buffer
starts flushing accounting keys before journal replay has finished
flushing accounting keys, journal replay will see the version number
from the new updates and updates from the journal will be lost.
To avoid this, journal replay has to flush accounting keys first, and
we'll be adding a flag so that write buffer flush knows to hold
accounting keys until then.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Use try_cmpxchg() family of functions instead of
cmpxchg (*ptr, old, new) == old. x86 CMPXCHG instruction returns
success in ZF flag, so this change saves a compare after cmpxchg
(and related move instruction in front of cmpxchg).
Also, try_cmpxchg() implicitly assigns old *ptr value to "old" when
cmpxchg fails. There is no need to re-read the value in the loop.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're about to start using bch_validate_flags for superblock section
validation - it's no longer bkey specific.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Combine iter/update/trigger/str_hash flags into a single enum, and
x-macroize them for a to_text() function later.
These flags are all for a specific iter/key/update context, so it makes
sense to group them together - iter/update/trigger flags were already
given distinct bits, this cleans up and unifies that handling.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree_key_can_insert_cached() should be checking the watermark -
BCH_TRANS_COMMIT_journal_replay really means nonblocking mode when
watermark < reclaim, it was being used incorrectly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The btree paths array is now dynamically resizable - and as well the
btree_insert_entries array, as it needs to be the same size.
The merge path (and interior update path) allocates new btree paths,
thus can trigger a resize; thus we need to not retain direct pointers
after invoking merge; similarly when running btree node triggers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a new watermark, higher priority than BCH_WATERMARK_reclaim,
for interior btree updates. We've seen a deadlock where journal replay
triggers a ton of btree node merges, and these use up all available open
buckets and then interior updates get stuck.
One cause of this is that we're currently lacking btree node merging on
write buffer btrees - that needs to be fixed as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, we assumed that keys were consistent with the snapshots
btree - but that's not correct as fsck may not have been run or may not
be complete.
This adds checks and error handling when using the in-memory snapshots
table (that mirrors the snapshots btree).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.
And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.
Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The disk space accounting rewrite is splitting out accounting for each
replicas set - those are moving to btree keys, instead of percpu
counters.
This breaks bch2_trans_fs_usage_apply() up, splitting out the part we
will still need.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Prep work for disk space accounting rewrite: we're going to want to use
a single callback for both of our current triggers, so we need to change
them to have the same type signature first.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Prep work for disk space accounting rewrite: we're going to want to use
a single callback for both of our current triggers, so we need to change
them to have the same type signature first.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since the btree_paths array is now about to become growable, we have to
be careful not to refer to paths by pointer across contexts where they
may be reallocated.
This fixes the remaining btree_interior_update() paths - split and
merge.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
