We shouldn't restrict ourselves to just downclock modes with
lower refresh rate than the preferred mode. Laptops these
days can offer higher refresh rate modes as well.
Remove the arbitrary limit and allow all modes that, apart
from the clock, match the preferred mode.
v2: s/add_edid_downclock_modes/add_edid_alt_fixed_modes/ (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Instead of duplicating the fixed/downclock modes we can just grab
the originals straight from the probed_modes list and keep them.
The next .get_modes() is going to repopulate the probed_modes list
anyway so whatever we leave there is just going to sit around until
that time wasting memory. In fact let's clear out the probed modes
list entirely to make sure we get 100% consistent behaviour starting
already from the very first real .get_modes().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The intel_panel_add_edid_fixed_mode() vs.
intel_panel_add_edid_downclock_mode() split is not really
helpful. Let's just roll those into a single function so
that the connector init code doesn't have to care too much
about this. All we need to know is whether DRRS should be
allowed or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
intel_drrs_init() is a mostly pointless wrapper around
intel_panel_add_edid_downclock_mode(), get rid of it.
The only really useful thing left in there is the debug
print regarding the DRRS type supported by the connector.
Let's just move that into intel_panel_init().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
All the non-EDID fixed mode functions basically do the exact
same thing. Let's refactor the common bits into a shared
function.
There are minor differences on how the mode types are populated,
whether the display info physical size is updated, and the debug
print. The differences are purely accidental, so unifying them is
actually a good thing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rather than having the connector init get the fixed mode back from
intel_panel and then feed it straight back into intel_panel_init()
let's just make the fixed mode lookup put the mode directly onto
the panel's fixed_modes list. Avoids the pointless round trip and
opens the door for further enhancements to the fixed mode handling.
v2: Make the debug message correct by using intel_panel_drrs_type() (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Apart from the EDID and VBT based mechanism we also sometimes
use the encoder's current mode as the panel fixed mode. We
currently have the same code for that duplicated in two places.
Let's unify.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rename intel_panel_vbt_fixed_mode() to
intel_panel_vbt_lfp_fixed_mode() to be more descriptive.
We'll have another VBT fixed mode function soon and we
don't want to confuse the two.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Replace all drm_mode_debug_printmodeline() calls with
DRM_MODE_FMT+DRM_MODE_ARG(). Makes the debug output a bit more
terse in places where we previously had a newline in the precedeing
drm_dbg_kms(), and avoids anything else sneaking in between the two
printk()s in all cases.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Store the fixed_mode and downclock_mode as a real list,
in preparation for exposing other supported modes as well.
v2: Init the list in intel_sdvo_connector_alloc() too
v3: Use list_first_entry_or_null() (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220314152737.9125-1-ville.syrjala@linux.intel.com
Let's start supporting static DRRS by trying to match the refresh
rate the user has requested, assuming the panel supports suitable
timings.
For now we stick to just our current two timings:
- fixed_mode: the panel's preferred mode
- downclock_mode: the lowest refresh rate mode we found
Some panels may support more timings than that, but we'll
have to convert our fixed_mode/downclock_mode pointers
into a full list before we can handle that.
v2: Rebase due to intel_panel_get_modes()
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-16-ville.syrjala@linux.intel.com
There are a couple of cases where we essentially just want to
get/check the preferred fixed mode of the panel. Add a small
helper for that to abstract away the direct pointer lookup.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Abstract away the details on where we store the fixed/downclock
modes, and also how we select them. Will be useful for static
DRRS (aka. allowing the user to select the refresh rate for the
panel).
We pass in the user requested mode to intel_panel_fixed_mode()
so that in the future it may try to match the refresh rate.
And intel_panel_downclock_mode() gets passed the adjusted_mode
we actually chose to use so that it may find a suitable lower
resresh rate variant.
v2: Hook it up for all encoders
s/fixed_mode/adjusted_mode/ in intel_panel_downclock_mode() (Jani)
Elaborate on the choice or arguments for the functions (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Instead of just having the pipe_src_{w,h} let's use a full
drm_rect for it. This will be particularly useful to astract
away some bigjoiner details.
v2: No hweight() stuff yet
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-11-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
When using a panel with a fixed mode we don't change the refresh
rate of the display. Reject any user requested mode which doesn't
match that fixed refresh rate.
Unfortunately when Xorg sees the scaling_mode property on the
connecor it likes to automagically cook up modes whose refresh
rate is a fair bit off from the fixed refresh rate we use. So
we have to give it some extra latitude so that we don't start to
reject all of it.
v2: sDVO now uses intel_panel_compute_config() too
v3: Add a debug message to inform the user what happened
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2939
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3969
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929184536.8332-1-ville.syrjala@linux.intel.com
Let's introduce a compute_config() helper for fixed mode panels.
For now all it does is the fixed_mode->adjusted_mode copy.
Note that with sDVO we have to ask the external encoder chip
to spit out our actual display timings for us, so the fixed_mode
to adjusted_mode copy done by intel_panel_compute_config() is
redundant, but we still want to use it to do other checks for us
later. We'll be fine so long as we only call it before
intel_sdvo_get_preferred_input_mode() overwrites adjusted_mode
with the timings from the encoder.
v2: Use intel_panel_compute_config() with sDVO
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927185207.13620-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
When using a fixed mode we won't change the refresh rate ever.
So filter out all modes that don't match the fixed_mode's refresh
rate.
I'm going to declare the "rounded to nearest Hz refresh
rates must match" approach good enough for now.
Note that we could start supporting multiple refresh rates
with panels that can do it, but that would mean replacing
the single fixed mode concept with a list of fixed modes.
Then we could look for the closest match to the user's
requested refresh rate and use that. But all of that would
be a fair bit of work so we'll leave it for later.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2939
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3969
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923200109.4459-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Hoist the intel_de.h include from intel_display_types.h one
level up. I need this in order to untangle the include order
so that I can add tracepoints into intel_de.h.
This little cocci script did most of the work for me:
@find@
@@
(
intel_de_read(...)
|
intel_de_read_fw(...)
|
intel_de_write(...)
|
intel_de_write_fw(...)
)
@has_include@
@@
(
#include "intel_de.h"
|
#include "display/intel_de.h"
)
@depends on find && !has_include@
@@
+ #include "intel_de.h"
#include "intel_display_types.h"
@depends on find && !has_include@
@@
+ #include "display/intel_de.h"
#include "display/intel_display_types.h"
Cc: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430143945.6776-1-ville.syrjala@linux.intel.com
Registering multiple backlight devices with intel_backlight name will
obviously fail, regardless of whether they're two connectors in the same
drm device or two different drm devices.
It would be preferrable to switch to completely unique names, and sunset
the generic intel_backlight name. However, there are apparently users
out there that hardcode the name, so the change would break backward
compatibility.
As a compromise, register the first device with intel_backlight name. In
the common case, this is the only backlight device anyway. From the
second device on, use card%d-%s-backlight format, for example
card0-eDP-2-backlight, to make the name unique.
This approach does not preclude us from registering the first device
using the same naming scheme in the future.
v2: Keep using intel_backlight name for first backlight device
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2794
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7dc3f6974711ce44522189dc9db05d1e6e24e6d8.1619604743.git.jani.nikula@intel.com
Add connector and backlight device name to logging, and propagate error
code from backlight_device_register() instead of flattening to
-ENODEV. Storing the name in an allocated buffer is unnecessary here,
but makes follow-up work on names much cleaner.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/271206461d9c0f42755792236330b588df3b532e.1619604743.git.jani.nikula@intel.com
While converting the rest of the driver to use GRAPHICS_VER() and
MEDIA_VER(), following what was done for display, some discussions went
back on what we did for display:
1) Why is the == comparison special that deserves a separate
macro instead of just getting the version and comparing directly
like is done for >, >=, <=?
2) IS_DISPLAY_RANGE() is weird in that it omits the "_VER" for
brevity. If we remove the current users of IS_DISPLAY_VER(), we
could actually repurpose it for a range check
With (1) there could be an advantage if we used gen_mask since multiple
conditionals be combined by the compiler in a single and instruction and
check the result. However a) INTEL_GEN() doesn't use the mask since it
would make the code bigger everywhere else and b) in the cases it made
sense, it also made sense to convert to the _RANGE() variant.
So here we repurpose IS_DISPLAY_VER() to work with a [ from, to ] range
like was the IS_DISPLAY_RANGE() and convert the current IS_DISPLAY_VER()
users to use == and != operators. Aside from the definition changes,
this was done by the following semantic patch:
@@ expression dev_priv, E1; @@
- !IS_DISPLAY_VER(dev_priv, E1)
+ DISPLAY_VER(dev_priv) != E1
@@ expression dev_priv, E1; @@
- IS_DISPLAY_VER(dev_priv, E1)
+ DISPLAY_VER(dev_priv) == E1
@@ expression dev_priv, from, until; @@
- IS_DISPLAY_RANGE(dev_priv, from, until)
+ IS_DISPLAY_VER(dev_priv, from, until)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
[Jani: Minor conflict resolve while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-4-lucas.demarchi@intel.com
Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the
display code, we should also kill off our use of the IS_GEN9_* macros
too. We'll do the conversion manually this time instead of using
Coccinelle since the most logical substitution can depend heavily on the
code context, and sometimes we can keep the code simpler if we make
additional adjustments such as swapping the order of if/else arms.
v2:
- Restore a lost negation in intel_pll_is_valid().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com
(cherry picked from commit 70bfb30743)
[Jani: cherry picked to topic branch to reduce conflicts]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN()
in the display code to use DISPLAY_VER() comparisons instead. The
following semantic patch was used:
@@ expression dev_priv, E; @@
- INTEL_GEN(dev_priv) == E
+ IS_DISPLAY_VER(dev_priv, E)
@@ expression dev_priv; @@
- INTEL_GEN(dev_priv)
+ DISPLAY_VER(dev_priv)
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ IS_DISPLAY_VER(dev_priv, E)
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_DISPLAY_RANGE(dev_priv, from, until)
There are still some display-related uses of INTEL_GEN() in intel_pm.c
(watermark code) and i915_irq.c. Those will be updated separately.
v2:
- Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers. (Jani)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com
Using struct drm_device.pdev is deprecated. Convert i915 to struct
drm_device.dev. No functional changes.
v6:
* also remove assignment in selftests/ in a later patch (Chris)
v5:
* remove assignment in later patch (Chris)
v3:
* rebased
v2:
* move gt/ and gvt/ changes into separate patches
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-2-tzimmermann@suse.de
So-recently a bunch of laptops on the market have started using DPCD
backlight controls instead of the traditional DDI backlight controls.
Originally we thought we had this handled by adding VESA backlight
control support to i915, but the story ended up being a lot more
complicated then that.
Simply put-there's two main backlight interfaces Intel can see in the
wild. Intel's proprietary HDR backlight interface, and the standard VESA
backlight interface. Note that many panels have been observed to report
support for both backlight interfaces, but testing has shown far more
panels work with the Intel HDR backlight interface at the moment.
Additionally, the VBT appears to be capable of reporting support for the
VESA backlight interface but not the Intel HDR interface which needs to
be probed by setting the right magic OUI.
On top of that however, there's also actually two different variants of
the Intel HDR backlight interface. The first uses the AUX channel for
controlling the brightness of the screen in both SDR and HDR mode, and
the second only uses the AUX channel for setting the brightness level in
HDR mode - relying on PWM for setting the brightness level in SDR mode.
For the time being we've been using EDIDs to maintain a list of quirks
for panels that safely do support the VESA backlight interface. Adding
support for Intel's HDR backlight interface in addition however, should
finally allow us to auto-detect eDP backlight controls properly so long
as we probe like so:
* If the panel's VBT reports VESA backlight support, assume it really
does support it
* If the panel's VBT reports DDI backlight controls:
* First probe for Intel's HDR backlight interface
* If that fails, probe for VESA's backlight interface
* If that fails, assume no DPCD backlight control
* If the panel's VBT reports any other backlight type: just assume it
doesn't have DPCD backlight controls
Changes since v4:
* Fix checkpatch issues
Changes since v3:
* Stop using drm_device and use drm_i915_private instead
* Don't forget to return from intel_dp_aux_hdr_get_backlight() if we fail
to read the current backlight mode from the DPCD
* s/uint8_t/u8/
* Remove unneeded parenthesis in intel_dp_aux_hdr_enable_backlight()
* Use drm_dbg_kms() in intel_dp_aux_init_backlight_funcs()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: thaytan@noraisin.net
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114221709.2261452-4-lyude@redhat.com
Currently, every different type of backlight hook that i915 supports is
pretty straight forward - you have a backlight, probably through PWM
(but maybe DPCD), with a single set of platform-specific hooks that are
used for controlling it.
HDR backlights, in particular VESA and Intel's HDR backlight
implementations, can end up being more complicated. With Intel's
proprietary interface, HDR backlight controls always run through the
DPCD. When the backlight is in SDR backlight mode however, the driver
may need to bypass the TCON and control the backlight directly through
PWM.
So, in order to support this we'll need to split our backlight callbacks
into two groups: a set of high-level backlight control callbacks in
intel_panel, and an additional set of pwm-specific backlight control
callbacks. This also implies a functional changes for how these
callbacks are used:
* We now keep track of two separate backlight level ranges, one for the
high-level backlight, and one for the pwm backlight range
* We also keep track of backlight enablement and PWM backlight
enablement separately
* Since the currently set backlight level might not be the same as the
currently programmed PWM backlight level, we stop setting
panel->backlight.level with the currently programmed PWM backlight
level in panel->backlight.pwm_funcs->setup(). Instead, we rely
on the higher level backlight control functions to retrieve the
current PWM backlight level (in this case, intel_pwm_get_backlight()).
Note that there are still a few PWM backlight setup callbacks that
do actually need to retrieve the current PWM backlight level, although
we no longer save this value in panel->backlight.level like before.
Additionally, we drop the call to lpt_get_backlight() in
lpt_setup_backlight(), and avoid unconditionally writing the PWM value that
we get from it and only write it back if we're in CPU mode, and switching
to PCH mode. The reason for this is because in the original codepath for
this, it was expected that the intel_panel_bl_funcs->setup() hook would be
responsible for fetching the initial backlight level. On lpt systems, the
only time we could ever be in PCH backlight mode is during the initial
driver load - meaning that outside of the setup() hook, lpt_get_backlight()
will always be the callback used for retrieving the current backlight
level. After this patch we still need to fetch and write-back the PCH
backlight value if we're switching from CPU mode to PCH, but because
intel_pwm_setup_backlight() will retrieve the backlight level after setup()
using the get() hook, which always ends up being lpt_get_backlight(). Thus
- an additional call to lpt_get_backlight() in lpt_setup_backlight() is
made redundant.
v9:
* Drop the intel_panel_invert_pwm_level() call in lpt_setup_backlight()
* Remove leftover detritus from lpt_setup_backlight()
v8:
* Go back to getting initial brightness level with
intel_pwm_get_backlight(), the other fix we had was definitely wrong.
v7:
* Use panel->backlight.pwm_funcs->get() to get the backlight level in
intel_pwm_setup_backlight(), lest we upset lockdep
* Rebase
* Rename intel_panel_sanitize_pwm_level() to intel_panel_invert_pwm_level()
v6:
* Make sure to grab connection_mutex before calling
intel_pwm_get_backlight() in intel_pwm_setup_backlight()
v5:
* Fix indenting warnings from checkpatch
v4:
* Fix commit message
* Remove outdated comment in intel_panel.c
* Rename pwm_(min|max) to pwm_level_(min|max)
* Use intel_pwm_get_backlight() in intel_pwm_setup_backlight() instead of
indirection
* Don't move intel_dp_aux_init_bcklight_funcs() call to bottom of
intel_panel_init_backlight_funcs() quite yet
v3:
* Reuse intel_panel_bl_funcs() for pwm_funcs
* Explain why we drop lpt_get_backlight()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: thaytan@noraisin.net
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114221709.2261452-3-lyude@redhat.com
In the next commit where we split PWM related backlight functions from
higher-level backlight functions, we'll want to be able to retrieve the
backlight level for the current display panel from the
intel_panel_bl_funcs->setup() function using pwm_funcs->get(). Since
intel_panel_bl_funcs->setup() is called before we've fully read in the
current hardware state into our atomic state, we can't grab atomic
modesetting locks safely anyway in intel_panel_bl_funcs->setup(), and some
PWM backlight functions (vlv_get_backlight() in particular) require knowing
the currently used pipe we need to be able to discern the current display
pipe through other means. Luckily, we're already passing the current
display pipe to intel_panel_bl_funcs->setup() so all we have to do in order
to achieve this is pass down that parameter to intel_panel_bl_funcs->get().
So, fix this by accepting an additional pipe parameter in
intel_panel_bl_funcs->get(), and leave figuring out the current display
pipe up to the caller.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114221709.2261452-2-lyude@redhat.com
The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight()
functions operate directly on the hardware registers. If inverting the
value is needed, using intel_panel_compute_brightness(), it should only
be done in the interface between hardware registers and
panel->backlight.level.
The CPU mode takeover code added in commit 5b1ec9ac7a
("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the
hardware register and converts to panel->backlight.level correctly,
however the value written back should remain in the hardware register
"domain".
This hasn't been an issue, because GM45 machines are the only known
users of i915.invert_brightness and the brightness invert quirk, and
without one of them no conversion is made. It's likely nobody's ever hit
the problem.
Fixes: 5b1ec9ac7a ("drm/i915/backlight: Fix backlight takeover on LPT, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v5.1+
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108152841.6944-1-jani.nikula@intel.com
Instead of using intel_panel->backlight.level, have the caller provide us
with the current panel backlight value. We'll need this for when we
separate PWM-related backlight callbacks from other means of backlight
control (like DPCD backlight controls), as the caller of each PWM callback
will be responsible for converting the current brightness value to it's
respective PWM level.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204223603.249878-4-lyude@redhat.com
Since we're going to need to add a set of lower-level PWM backlight
control hooks to be shared by normal backlight controls and HDR
backlight controls in SDR mode, let's add a prefix to the external PWM
backlight functions so that the difference between them and the high
level PWM-only backlight functions is a bit more obvious.
This introduces no functional changes.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: thaytan@noraisin.net
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204223603.249878-3-lyude@redhat.com
This moves the functions into static const instead of having
funcs and data in the same struct.
It leaves the power callback alone, as it is used in a different
manner.
v2: leave power callback alone (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130210945.31850-1-airlied@gmail.com
Since the display hardware is all there even when INTEL_DISPLAY_ENABLED
return false we have to be capable of shutting it down cleanly so
as to not anger the hw. To that end let's reduce the effect of
!INTEL_DISPLAY_ENABLE to just treating all outputs as disconnected.
Should prevent anyone from automagically enabling any of them, while
still allowing us to cleanly shut them down.
v2: Put the check into the right place for CRT
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910164256.25983-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Now that the PWM drivers which we use have been converted to the atomic
PWM API, we can move the i915 panel code over to using the atomic PWM API.
The removes a long standing FIXME and this removes a flicker where
the backlight brightness would jump to 100% when i915 loads even if
using the fastset path.
Note that this commit also simplifies pwm_disable_backlight(), by dropping
the intel_panel_actually_set_backlight(..., 0) call. This call sets the
PWM to 0% duty-cycle. I believe that this call was only present as a
workaround for a bug in the pwm-crc.c driver where it failed to clear the
PWM_OUTPUT_ENABLE bit. This is fixed by an earlier patch in this series.
After the dropping of this workaround, the usleep call, which seems
unnecessary to begin with, has no useful effect anymore, so drop that too.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-18-hdegoede@redhat.com
So far for devices using an external PWM controller (devices using
pwm_setup_backlight()), we have been hardcoding the minimum allowed
PWM level to 0. But several of these devices specify a non 0 minimum
setting in their VBT.
Change pwm_setup_backlight() to use get_backlight_min_vbt() to get
the minimum level.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-17-hdegoede@redhat.com
So far for devices using an external PWM controller (devices using
pwm_setup_backlight()), we have been hardcoding the period-time passed to
pwm_config() to 21333 ns.
I suspect this was done because many VBTs set the PWM frequency to 200
which corresponds to a period-time of 5000000 ns, which greatly exceeds
the PWM_MAX_PERIOD_NS define in the Crystal Cove PMIC PWM driver, which
used to be 21333.
This PWM_MAX_PERIOD_NS define was actually based on a bug in the PWM
driver where its period and duty-cycle times where off by a factor of 256.
Due to this bug the hardcoded CRC_PMIC_PWM_PERIOD_NS value of 21333 would
result in the PWM driver using its divider of 128, which would result in
a PWM output frequency of 6000000 Hz / 256 / 128 = 183 Hz. So actually
pretty close to the default VBT value of 200 Hz.
Now that this bug in the pwm-crc driver is fixed, we can actually use
the VBT defined frequency.
This is important because:
a) With the pwm-crc driver fixed it will now translate the hardcoded
CRC_PMIC_PWM_PERIOD_NS value of 21333 ns / 46 Khz to a PWM output
frequency of 23 KHz (the max it can do).
b) The pwm-lpss driver used on many models has always honored the
21333 ns / 46 Khz request
Some panels do not like such high output frequencies. E.g. on a Terra
Pad 1061 tablet, using the LPSS PWM controller, the backlight would go
from off to max, when changing the sysfs backlight brightness value from
90-100%, anything under aprox. 90% would turn the backlight fully off.
Honoring the VBT specified PWM frequency will also hopefully fix the
various bug reports which we have received about users perceiving the
backlight to flicker after a suspend/resume cycle.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-16-hdegoede@redhat.com
Factor the code which checks and drm_dbg_kms-s the VBT PWM frequency
out of get_backlight_max_vbt().
This is a preparation patch for honering the VBT PWM frequency for
devices which use an external PWM controller (devices using
pwm_setup_backlight()).
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-15-hdegoede@redhat.com
