Now that each non-generic driver has their own directory,
sort the entries.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
s5p-jpeg-specific config stuff on a separate Kconfig file.
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
s5p-mfc-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
bdisp-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
delta-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
rkisp1-specific config stuff on a separate Kconfig file.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
ti-vpe-specific config stuff on a separate Kconfig file.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
vde-specific config stuff on a separate Kconfig file.
Acked-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
sun8i-rotate-specific config stuff on a separate Kconfig file.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
sun8i-di-specific config stuff on a separate Kconfig file.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
stm32-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
hva-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
s5p-g2d-specific config stuff on a separate Kconfig file.
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
s3c-camif-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
rga-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
venus-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
camss-specific config stuff on a separate Kconfig file.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
omap3isp-specific config stuff on a separate Kconfig file.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
mtk-vpu-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
mtk-vcodec-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
mtk-mdp-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
mtk-jpeg-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
ge2d-specific config stuff on a separate Kconfig file.
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
exynos-gsc-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
coda-specific config stuff on a separate Kconfig file.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
amphion-specific config stuff on a separate Kconfig file.
Reviewed-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to better organize the platform/Kconfig, place
allegro-dvt-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to cleanup the main platform media directory, move Renesas
driver to its own directory.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to cleanup the main platform media directory, move Intel
driver to its own directory.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to cleanup the main platform media directory, move NXP
drivers to their own directory.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to cleanup the main platform media directory, move Aspeed
driver to its own directory.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Right now, platform dependencies are organized by the type of
the platform driver. Yet, things tend to become very messy with
time. The better seems to organize the drivers per manufacturer,
as other Kernel subsystems are doing.
As a preparation for such purpose, get rid of menuconfigs,
moving the per-menu dependencies to be at the driver-specifig
config entires.
This shoud give flexibility to reorganize the platform drivers
per manufacturer and re-sort them.
This patch removes all "if..endif" options from the platform
Kconfig, converting them into depends on.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There are lots of inconsistencies here: some directories are
included as-is, and others included using one (or more) symbols
that are inside it. Also, its entries are not sorted.
That makes it harder to maintain.
Reorganize it by placing everything on alphabetic order and
providing some hints about how patches for such file is expected.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRSrcquik9wuZrNjXJrQl33mxwedgUCYiYxWwAKCRBrQl33mxwe
dpysAQCPLpcMmMgKZvuk/QYCtibW/eBQiB0lbXdwSUtJUK6otQD/Rbh5zTzyQcn0
XZRIBnjFkLhPOHaqjzvNnqllqWbPBQ8=
=02L2
-----END PGP SIGNATURE-----
Merge tag 'br-v5.18s' of git://linuxtv.org/hverkuil/media_tree into media_stage
Tag branch
* tag 'br-v5.18s' of git://linuxtv.org/hverkuil/media_tree:
ivtv: fix incorrect device_caps for ivtvfb
media: rcar-csi2: Drop comma after SoC match table sentinel
media: camss: Replace hard coded value with parameter
media: saa7134: fix incorrect use to determine if list is empty
media: MAINTAINERS: update rksip1 maintainers info
MAINTAINERS: update media vimc driver maintainers
media: i2c: max2175: Use rbtree rather than flat register cache
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
It does not make sense to have a comma after a sentinel, as any new
elements must be added before the sentinel.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Kernel test robot reported below warning ->
drivers/media/platform/qcom/camss/camss-csid-gen2.c:407:3:
warning: Value stored to 'val' is never read
[clang-analyzer-deadcode.DeadStores]
Replace hard coded value with val.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add V4L2 driver entry for the amphion vpu encoder/decoder.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This part implements the malone decoder rpc interface.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This part implements the windsor encoder rpc interface.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This consists of video decoder implementation plus decoder controls.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This consists of video encoder implementation plus encoder controls.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
vpu_v4l2.c implements the v4l2 m2m driver methods.
vpu_helpers.c implements the common helper functions
vpu_color.c converts the v4l2 colorspace with
the VUI parameters that specified by ITU-T | ISO/IEC
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
driver use mailbox to communicate with vpu core.
and there are a command buffer and a message buffer.
driver will write commands to the command buffer,
then trigger a vpu core interrupt
vpu core will write messages to the message buffer,
then trigger a cpu interrupt.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The vpu supports encoder and decoder.
it needs vpu core to handle it.
core will run either encoder or decoder firmware.
This driver is for support the vpu core.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The amphion vpu codec ip contains encoder and decoder.
Windsor is the encoder, it supports to encode H.264.
Malone is the decoder, it features a powerful
video processing unit able to decode many formats,
such as H.264, HEVC, and other formats.
This Driver is for this IP that is based on the v4l2 mem2mem framework.
Supported SoCs are: IMX8QXP, IMX8QM
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----
iJMEABEIADsWIQRTrFil9ZSGNsBKG/gUHfpUoeyN6gUCYiHBnh0cc2FrYXJpLmFp
bHVzQGxpbnV4LmludGVsLmNvbQAKCRAUHfpUoeyN6jvwAQCXadtz1Ak1oRm+nWih
dO6rM2yonXUgZHyCwT3DRhdUHwD/Xs51RkSsrISWAuSqClDe0MSfREQ+TQKGtU6+
zQkHU1Q=
=4R9H
-----END PGP SIGNATURE-----
Merge tag 'for-5.18-2.6-signed' of git://linuxtv.org/sailus/media_tree into media_stage
Even yet more V4L2 patches for 5.18
* tag 'for-5.18-2.6-signed' of git://linuxtv.org/sailus/media_tree:
media: i2c: Fix pixel array positions in ov8865
media: adv7183: Convert to GPIO descriptors
media: m5mols: Convert to use GPIO descriptors
media: noon010p30: Convert to use GPIO descriptors
media: mt9m111: Drop unused include
media: adv7511: Drop unused include
media: i2c: isl7998x: Add driver for Intersil ISL7998x
media: dt-bindings: Add Intersil ISL79987 DT bindings
media: media-entity: Clarify media_entity_cleanup() usage
media: i2c: imx274: Drop surplus includes
media: i2c: ccs: Drop unused include
v4l: fwnode: Remove now-redundant loop from v4l2_fwnode_parse_reference()
v4l: fwnode: Drop redunant -ENODATA check in property reference parsing
media: media-entity: Simplify media_pipeline_start()
media: media-entity: Add media_pad_is_streaming() helper function
media: Add a driver for the og01a1b camera sensor
media: i2c: ov5648: Fix lockdep error
media: ov5640: Fix set format, v4l2_mbus_pixelcode not updated
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRSrcquik9wuZrNjXJrQl33mxwedgUCYhSuNQAKCRBrQl33mxwe
dqOzAQCYc0iOPhTap9q7thsa5KYbyOU1A45u2jeETEz80La8mwEA4GjXUWMi2Scs
e0BMW+hej/kjPnFHNqz4UBBXoDG0Egg=
=TDr2
-----END PGP SIGNATURE-----
Merge tag 'br-v5.18l' of git://linuxtv.org/hverkuil/media_tree into media_stage
Tag branch
* tag 'br-v5.18l' of git://linuxtv.org/hverkuil/media_tree: (39 commits)
media: imx-jpeg: Set V4L2_BUF_FLAG_LAST at eos
media: meson-ir-tx: remove incorrect doc comment
media: vivid: use time_is_after_jiffies() instead of open coding it
media: wl128x: use time_is_before_jiffies() instead of open coding it
media: tda8083: use time_is_after_jiffies() instead of open coding it
media: stv0299: use time_is_before_jiffies() instead of open coding it
media: si21xx: use time_is_before_jiffies() instead of open coding it
media: cedrus: h264: Fix neighbour info buffer size
media: cx88-mpeg: clear interrupt status register before streaming video
media: cedrus: H265: Fix neighbour info buffer size
media: fsl-viu: use GFP_KERNEL
media: cx18: use GFP_KERNEL
drivers: meson: vdec: add VP9 support to GXM
stkwebcam: add new Asus laptop to upside_down table
media: imx-jpeg: fix a bug of accessing array out of bounds
media: sun6i-csi: fix colorspace in sun6i_video_try_fmt()
media: usb: go7007: s2250-board: fix leak in probe()
media: cedrus: Add watchdog for job completion
pixfmt-yuv-planar.rst: fix typo: 'Cr, Cr' -> 'Cr, Cb'
media: imx-jpeg: Remove unnecessary print function dev_err()
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The TODO of tegra-vde driver has been completed, driver now supports
V4L2 stateless video decoding API. Relocate driver to drivers/media.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
