When using "run_cmd <command> &", then "$!" refers to the PID of the
subshell used to run <command>, not the command itself. Therefore
nettest_pids actually doesn't contain the list of the nettest commands
running in the background. So cleanup() can't kill them and the nettest
processes run until completion (fortunately they have a 5s timeout).
Fix this by defining a new command for running processes in the
background, for which "$!" really refers to the PID of the command run.
Also, double quote variables on the modified lines, to avoid shellcheck
warnings.
Fixes: ece1278a9b ("selftests: net: add ESP-in-UDP PMTU test")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cleanup() function takes care of killing processes launched by the
test functions. It relies on variables like ${tcpdump_pids} to get the
relevant PIDs. But tests are run in their own subshell, so updated
*_pids values are invisible to other shells. Therefore cleanup() never
sees any process to kill:
$ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
$ pgrep -af tcpdump
6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
Fix this by running cleanup() in the context of the test subshell.
Now that each test cleans the environment after completion, there's no
need for calling cleanup() again when the next test starts. So let's
drop it from the setup() function. This is okay because cleanup() is
also called when pmtu.sh starts, so even the first test starts in a
clean environment.
Also, use tcpdump's immediate mode. Otherwise it might not have time to
process buffered packets, resulting in missing packets or even empty
pcap files for short tests.
Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can
still inspect the test environment upon failure when using -p.
Fixes: a92a0a7b8e ("selftests: pmtu: Simplify cleanup and namespace names")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds a selftest for the XDP_REDIRECT facility in BPF_PROG_RUN, that
redirects packets into a veth and counts them using an XDP program on the
other side of the veth pair and a TC program on the local side of the veth.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-6-toke@redhat.com
These will also be used by the xdp_do_redirect test being added in the next
commit.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-5-toke@redhat.com
Add checks for memblock_alloc_try_nid for bottom up allocation direction.
As the definition of this function is pretty close to the core
memblock_alloc_range_nid, the test cases implemented here cover most of
the code paths related to the memory allocations.
The tested scenarios are:
- Region can be allocated within the requested range (both with aligned
and misaligned boundaries)
- Region can be allocated between two already existing entries
- Not enough space between already reserved regions
- Memory at the range boundaries is reserved but there is enough space
to allocate a new region
- The memory range is too narrow but memory can be allocated before
the maximum address
- Edge cases:
+ Minimum address is below memblock_start_of_DRAM()
+ Maximum address is above memblock_end_of_DRAM()
Add test case wrappers to test both directions in the same context.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/1c0ba11b8da5dc8f71ad45175c536fa4be720984.1646055639.git.karolinadrobnik@gmail.com
Add tests for memblock_alloc_try_nid for top down allocation direction.
As the definition of this function is pretty close to the core
memblock_alloc_range_nid, the test cases implemented here cover most of
the code paths related to the memory allocations.
The tested scenarios are:
- Region can be allocated within the requested range (both with aligned
and misaligned boundaries)
- Region can be allocated between two already existing entries
- Not enough space between already reserved regions
- Memory range is too narrow but memory can be allocated before
the maximum address
- Edge cases:
+ Minimum address is below memblock_start_of_DRAM()
+ Maximum address is above memblock_end_of_DRAM()
Add checks for both allocation directions:
- Region starts at the min_addr and ends at max_addr
- Maximum address is too close to the beginning of the available
memory
- Memory at the range boundaries is reserved but there is enough space
to allocate a new region
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/d6c282e0f9f62c15bf74c216214604764232d637.1646055639.git.karolinadrobnik@gmail.com
Add checks for memblock_alloc_from for bottom up allocation direction.
The tested scenarios are:
- Not enough space to allocate memory at the minimal address
- Minimal address parameter is smaller than the start address
of the available memory
- Minimal address parameter is too close to the end of the available
memory
Add test case wrappers to test both directions in the same context.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/506cf5293c8a21c012b7ea87b14af07754d3e656.1646055639.git.karolinadrobnik@gmail.com
Add checks for memblock_alloc_from for default allocation direction.
The tested scenarios are:
- Not enough space to allocate memory at the minimal address
- Minimal address parameter is smaller than the start address
of the available memory
- Minimal address is too close to the available memory
Add simple memblock_alloc_from test that can be used to test both
allocation directions (minimal address is aligned or misaligned).
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/3dd645f437975fd393010b95b8faa85d2b86490a.1646055639.git.karolinadrobnik@gmail.com
Add checks for memblock_alloc for bottom up allocation direction.
The tested scenarios are:
- Region can be allocated on the first fit (with and without
region merging)
- Region can be allocated on the second fit (with and without
region merging)
Add test case wrappers to test both directions in the same context.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/426674eee20d99dca49caf1ee0142a83dccbc98d.1646055639.git.karolinadrobnik@gmail.com
Add checks for memblock_alloc for top down allocation direction.
The tested scenarios are:
- Region can be allocated on the first fit (with and without
region merging)
- Region can be allocated on the second fit (with and without
region merging)
Add checks for both allocation directions:
- Region can be allocated between two already existing entries
- Limited memory available
- All memory is reserved
- No available memory registered with memblock
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/26ccf409b8ff0394559d38d792b2afb24b55887c.1646055639.git.karolinadrobnik@gmail.com
Allocation functions that return virtual addresses (with an exception
of _raw variant) clear the allocated memory after reserving it. This
requires valid memory ranges in memblock.memory.
Introduce memory_block variable to store memory that can be registered
with memblock data structure. Move assert.h and size.h includes to common.h
to share them between the test files.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/dce115503c74a6936c44694b00014658a1bb6522.1646055639.git.karolinadrobnik@gmail.com
All memblock data structure fields are reset in one function. In some
test cases, it's preferred to reset memory region arrays without
modifying other values like allocation direction flag.
Extract two functions from reset_memblock, so it's possible to reset
different parts of memblock:
- reset_memblock_regions - reset region arrays and their counters
- reset_memblock_attributes - set other fields to their default values
Update checks in basic_api.c to use new definitions. Remove
reset_memblock call from memblock_initialization_check, so the true
initial values are tested.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/5cc1ba9a0ade922dbf4ba450165b81a9ed17d4a9.1646055639.git.karolinadrobnik@gmail.com
Ensure implicit endpoint are created when expected and
that the user-space can update them
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some edge scenarios, an MPTCP subflows can use a local address
mapped by a "implicit" endpoint created by the in-kernel path manager.
Such endpoints presence can be confusing, as it's creation is hard
to track and will prevent the later endpoint creation from the user-space
using the same address.
Define a new endpoint flag to mark implicit endpoints and allow the
user-space to replace implicit them with user-provided data at endpoint
creation time.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The in-kernel MPTCP path manager, when processing the MPTCP_PM_CMD_FLUSH_ADDR
command, generates RM_ADDR events for each known local address. While that
is allowed by the RFC, it makes unpredictable the exact number of RM_ADDR
generated when both ends flush the PM addresses.
This change restricts the RM_ADDR generation to previously explicitly
announced addresses, and adjust the expected results in a bunch of related
self-tests.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "selftests: mptcp: improve 'fair usage on close' stability" commit
changed that self test to check the TcpAttemptFails MIB instead of
looking for TW sockets. The associated bash function wasn't renamed in
that commit because of the merge conflicts it would cause, so this
commit updates the function name as Paolo originally intended.
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without this patch, no tests would be ran when launching:
mptcp_join.sh -cCi
In any order or a combination with 2 of these letters.
The recommended way with getopt is first parse all options and then act.
This allows to do some actions in priority, e.g. display the help menu
and stop.
But also some global variables changing the behaviour of this selftests
-- like the ones behind -cCi options -- can be set before running the
different tests. By doing that, we can also avoid long and unreadable
regex.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove unneeded spleep and increase length of dummy CPU
intensive computation to guarantee test process execution.
Also, complete aforemention computation as soon as
test success criteria is met
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220308200449.1757478-4-mykolal@fb.com
Substitute sleep with dummy CPU intensive computation.
Finish aforemention computation as soon as signal was
delivered to the test process. Make the BPF code to
only execute when PID global variable is set
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220308200449.1757478-3-mykolal@fb.com
Linux kernel may automatically reduce kernel.perf_event_max_sample_rate
value when running tests in parallel on slow systems. Linux kernel checks
against this limit when opening perf event with freq=1 parameter set.
The lower bound is 1000. This patch reduces sample_freq value to 1000
in all BPF tests that use sample_freq to ensure they always can open
perf event.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220308200449.1757478-2-mykolal@fb.com
Add a selftest that enables populating a VM with the maximum amount of
guest memory allowed by the underlying architecture. Abuse KVM's
memslots by mapping a single host memory region into multiple memslots so
that the selftest doesn't require a system with terabytes of RAM.
Default to 512gb of guest memory, which isn't all that interesting, but
should work on all MMUs and doesn't take an exorbitant amount of memory
or time. E.g. testing with ~64tb of guest memory takes the better part
of an hour, and requires 200gb of memory for KVM's page tables when using
4kb pages.
To inflicit maximum abuse on KVM' MMU, default to 4kb pages (or whatever
the not-hugepage size is) in the backing store (memfd). Use memfd for
the host backing store to ensure that hugepages are guaranteed when
requested, and to give the user explicit control of the size of hugepage
being tested.
By default, spin up as many vCPUs as there are available to the selftest,
and distribute the work of dirtying each 4kb chunk of memory across all
vCPUs. Dirtying guest memory forces KVM to populate its page tables, and
also forces KVM to write back accessed/dirty information to struct page
when the guest memory is freed.
On x86, perform two passes with a MMU context reset between each pass to
coerce KVM into dropping all references to the MMU root, e.g. to emulate
a vCPU dropping the last reference. Perform both passes and all
rendezvous on all architectures in the hope that arm64 and s390x can gain
similar shenanigans in the future.
Measure and report the duration of each operation, which is helpful not
only to verify the test is working as intended, but also to easily
evaluate the performance differences different page sizes.
Provide command line options to limit the amount of guest memory, set the
size of each slot (i.e. of the host memory region), set the number of
vCPUs, and to enable usage of hugepages.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-29-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add cpu_relax() for s390 and x86 for use in arch-agnostic tests. arm64
already defines its own version.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-28-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the code for allocating guest memory via memfd out of
vm_userspace_mem_region_add() and into a new helper, kvm_memfd_alloc().
A future selftest to populate a guest with the maximum amount of guest
memory will abuse KVM's memslots to alias guest memory regions to a
single memfd-backed host region, i.e. needs to back a guest with memfd
memory without a 1:1 association between a memslot and a memfd instance.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-27-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move set_memory_region_test's KVM_SET_USER_MEMORY_REGION helper to KVM's
utils so that it can be used by other tests. Provide a raw version as
well as an assert-success version to reduce the amount of boilerplate
code need for basic usage.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-26-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In test_lwt_ip_encap, the ingress IPv6 encap test failed from time to
time. The failure occured when an IPv4 ping through the IPv6 GRE
encapsulation did not receive a reply within the timeout. The IPv4 ping
and the IPv6 ping in the test used different timeouts (1 sec for IPv4
and 6 sec for IPv6), probably taking into account that IPv6 might need
longer to successfully complete. However, when IPv4 pings (with the
short timeout) are encapsulated into the IPv6 tunnel, the delays of IPv6
apply.
The actual reason for the long delays with IPv6 was that the IPv6
neighbor discovery sometimes did not complete in time. This was caused
by the outgoing interface only having a tentative link local address,
i.e., not having completed DAD for that lladdr. The ND was successfully
retried after 1 sec but that was too late for the ping timeout.
The IPv6 addresses for the test were already added with nodad. However,
for the lladdrs, DAD was still performed. We now disable DAD in the test
netns completely and just assume that the two lladdrs on each veth pair
do not collide. This removes all the delays for IPv6 traffic in the
test.
Without the delays, we can now also reduce the delay of the IPv6 ping to
1 sec. This makes the whole test complete faster because we don't need
to wait for the excessive timeout for each IPv6 ping that is supposed
to fail.
Fixes: 0fde56e438 ("selftests: bpf: add test_lwt_ip_encap selftest")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/4987d549d48b4e316cd5b3936de69c8d4bc75a4f.1646305899.git.fmaurer@redhat.com
This reverts commit 878aed8db3.
This change breaks existing setups where conntrack is used with
asymmetric paths.
In these cases, the NAT transformation occurs on the syn-ack instead of
the syn:
1. SYN x:12345 -> y -> 443 // sent by initiator, receiverd by responder
2. SYNACK y:443 -> x:12345 // First packet seen by conntrack, as sent by responder
3. tuple_force_port_remap() gets called, sees:
'tcp from 443 to port 12345 NAT' -> pick a new source port, inititor receives
4. SYNACK y:$RANDOM -> x:12345 // connection is never established
While its possible to avoid the breakage with NOTRACK rules, a kernel
update should not break working setups.
An alternative to the revert is to augment conntrack to tag
mid-stream connections plus more code in the nat core to skip NAT
for such connections, however, this leads to more interaction/integration
between conntrack and NAT.
Therefore, revert, users will need to add explicit nat rules to avoid
port shadowing.
Link: https://lore.kernel.org/netfilter-devel/20220302105908.GA5852@breakpoint.cc/#R
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2051413
Signed-off-by: Florian Westphal <fw@strlen.de>
Add a test for /dev/tpmrm0 in async mode that checks if
the code handles invalid handles correctly.
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <linux-integrity@vger.kernel.org>
Cc: <linux-kselftest@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Tested-by: Jarkko Sakkinen<jarkko@kernel.org>
Signed-off-by: Tadeusz Struk <tstruk@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Determine an available PCR bank to be used by a test case by querying the
capability TPM2_GET_CAP. The TPM2 returns TPML_PCR_SELECTIONS that
contains an array of TPMS_PCR_SELECTIONs indicating available PCR banks
and the bitmasks that show which PCRs are enabled in each bank. Collect
the data in a dictionary. From the dictionary determine the PCR bank that
has the PCRs enabled that the test needs. This avoids test failures with
TPM2's that either to not have a SHA-1 bank or whose SHA-1 bank is
disabled.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Dynamic linking when compiling on the host can cause issues when the
libc version does not match the one in the VM image. Update the
docs to explain how to do this.
Before:
./vmtest.sh -- ./test_progs -t test_ima
./test_progs: /usr/lib/libc.so.6: version `GLIBC_2.33' not found (required by ./test_progs)
After:
LDLIBS=-static ./vmtest.sh -- ./test_progs -t test_ima
test_ima:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Reported-by: "Geyslan G. Bem" <geyslan@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220307133048.1287644-1-kpsingh@kernel.org
If the test triggers a problem it may well result in a log message from
the kernel such as a WARN() or BUG(). If these include a PID it can help
with debugging to know if it was the parent or child process that triggered
the issue, since the test is just creating a new thread the process name
will be the same either way. Print the PIDs of the parent and child on
startup so users have this information to hand should it be needed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220303192817.2732509-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Include a testcase to check if the sysfs files for energy and frequency
related have its related attribute files exist and populated
Signed-off-by: Pratik R. Sampat <psampat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220217105321.52941-3-psampat@linux.ibm.com
Add test for real address or control memory address access
error handling, using NX-GZIP engine.
The error is injected by accessing the control memory address
using illegal instruction, on successful handling the process
attempting to access control memory address using illegal
instruction receives SIGBUS.
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220107141428.67862-2-ganeshgr@linux.ibm.com
The nds32 architecture, also known as AndeStar V3, is a custom 32-bit
RISC target designed by Andes Technologies. Support was added to the
kernel in 2016 as the replacement RISC-V based V5 processors were
already announced, and maintained by (current or former) Andes
employees.
As explained by Alan Kao, new customers are now all using RISC-V,
and all known nds32 users are already on longterm stable kernels
provided by Andes, with no development work going into mainline
support any more.
While the port is still in a reasonably good shape, it only gets
worse over time without active maintainers, so it seems best
to remove it before it becomes unusable. As always, if it turns
out that there are mainline users after all, and they volunteer
to maintain the port in the future, the removal can be reverted.
Link: https://lore.kernel.org/linux-mm/YhdWNLUhk+x9RAzU@yamatobi.andestech.com/
Link: https://lore.kernel.org/lkml/20220302065213.82702-1-alankao@andestech.com/
Link: https://www.andestech.com/en/products-solutions/andestar-architecture/
Signed-off-by: Alan Kao <alankao@andestech.com>
[arnd: rewrite changelog to provide more background]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge a topic branch we are maintaining with some cross-architecture
changes to function descriptor handling and their use in LKDTM.
From Christophe's cover letter:
Fix LKDTM for PPC64/IA64/PARISC
PPC64/IA64/PARISC have function descriptors. LKDTM doesn't work on those
three architectures because LKDTM messes up function descriptors with
functions.
This series does some cleanup in the three architectures and refactors
function descriptors so that it can then easily use it in a generic way
in LKDTM.
Fit the following coccicheck warning:
tools/testing/selftests/net/reuseport_bpf_numa.c:89:28-29:
WARNING: Use ARRAY_SIZE.
It has been tested with gcc (Debian 8.3.0-6) 8.3.0 on x86_64.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test for percpu btf_type_tag. Similar to the "user" tag, we test
the following cases:
1. __percpu struct field.
2. __percpu as function parameter.
3. per_cpu_ptr() accepts dynamically allocated __percpu memory.
Because the test for "user" and the test for "percpu" are very similar,
a little bit of refactoring has been done in btf_tag.c. Basically, both
tests share the same function for loading vmlinux and module btf.
Example output from log:
> ./test_progs -v -t btf_tag
libbpf: prog 'test_percpu1': BPF program load failed: Permission denied
libbpf: prog 'test_percpu1': -- BEGIN PROG LOAD LOG --
...
; g = arg->a;
1: (61) r1 = *(u32 *)(r1 +0)
R1 is ptr_bpf_testmod_btf_type_tag_1 access percpu memory: off=0
...
test_btf_type_tag_mod_percpu:PASS:btf_type_tag_percpu 0 nsec
#26/6 btf_tag/btf_type_tag_percpu_mod1:OK
libbpf: prog 'test_percpu2': BPF program load failed: Permission denied
libbpf: prog 'test_percpu2': -- BEGIN PROG LOAD LOG --
...
; g = arg->p->a;
2: (61) r1 = *(u32 *)(r1 +0)
R1 is ptr_bpf_testmod_btf_type_tag_1 access percpu memory: off=0
...
test_btf_type_tag_mod_percpu:PASS:btf_type_tag_percpu 0 nsec
#26/7 btf_tag/btf_type_tag_percpu_mod2:OK
libbpf: prog 'test_percpu_load': BPF program load failed: Permission denied
libbpf: prog 'test_percpu_load': -- BEGIN PROG LOAD LOG --
...
; g = (__u64)cgrp->rstat_cpu->updated_children;
2: (79) r1 = *(u64 *)(r1 +48)
R1 is ptr_cgroup_rstat_cpu access percpu memory: off=48
...
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu_load 0 nsec
#26/8 btf_tag/btf_type_tag_percpu_vmlinux_load:OK
load_btfs:PASS:could not load vmlinux BTF 0 nsec
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu 0 nsec
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu_helper 0 nsec
#26/9 btf_tag/btf_type_tag_percpu_vmlinux_helper:OK
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220304191657.981240-5-haoluo@google.com
Include a few verifier selftests that test against the problems being
fixed by previous commits, i.e. release kfunc always require
PTR_TO_BTF_ID fixed and var_off to be 0, and negative offset is not
permitted and returns a helpful error message.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-9-memxor@gmail.com
check_ptr_off_reg only allows fixed offset to be set for PTR_TO_BTF_ID,
where reg->off < 0 doesn't make sense. This would shift the pointer
backwards, and fails later in btf_struct_ids_match or btf_struct_walk
due to out of bounds access (since offset is interpreted as unsigned).
Improve the verifier by rejecting this case by using a better error
message for BPF helpers and kfunc, by putting a check inside the
check_func_arg_reg_off function.
Also, update existing verifier selftests to work with new error string.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-4-memxor@gmail.com
The error message when I build vm tests on debian10 (GLIBC 2.28):
userfaultfd.c: In function `userfaultfd_pagemap_test':
userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use
in this function); did you mean `MADV_RANDOM'?
if (madvise(area_dst, test_pgsize, MADV_PAGEOUT))
^~~~~~~~~~~~
MADV_RANDOM
This patch includes these newer definitions from UAPI linux/mman.h, is
useful to fix tests build on systems without these definitions in glibc
sys/mman.h.
Link: https://lkml.kernel.org/r/20220227055330.43087-2-zhouchengming@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The hugepage-mremap test will create a file in a hugetlb filesystem. In
a default 'run_vmtests' run, the file will contain all the hugetlb
pages. After the test, the file remains and there are no free hugetlb
pages for subsequent tests. This causes those hugetlb tests to fail.
Change hugepage-mremap to take the name of the hugetlb file as an
argument. Unlink the file within the test, and just to be sure remove
the file in the run_vmtests script.
Link: https://lkml.kernel.org/r/20220201033459.156944-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Building memblock simulator on x86_64 with 32BIT_PHYS_ADDR_T=1
produces "cast to pointer from integer of different size" warnings.
Fix them by building the binary in 32-bit environment when using
32-bit physical addresses.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Add a selftest validating various aspects of libbpf's handling of custom
SEC() handlers. It also demonstrates how libraries can ensure very early
callbacks registration and unregistration using
__attribute__((constructor))/__attribute__((destructor)) functions.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220305010129.1549719-4-andrii@kernel.org
This patch updated the output info of chk_rm_nr. Renamed 'sf' to 'rmsf',
which means 'remove subflow'. Added the display of whether the inverted
namespaces has been used to check the mib counters.
The new output looks like this:
002 remove multiple subflows syn[ ok ] - synack[ ok ] - ack[ ok ]
rm [ ok ] - rmsf [ ok ]
003 remove single address syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
rm [ ok ] - rmsf [ ok ] invert
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added five more arguments for chk_join_nr(). The default
values of them are all zero.
The first two, csum_ns1 and csum_ns1, are passed to chk_csum_nr(), to
check the mib counters of the checksum errors in ns1 and ns2. A '+'
can be added into this two arguments to represent that multiple
checksum errors are allowed when doing this check. For example,
chk_csum_nr "" +2 +2
indicates that two or more checksum errors are allowed in both ns1 and
ns2.
The remaining two, fail_nr and rst_nr, are passed to chk_fail_nr() and
chk_rst_nr() respectively, to check the sending and receiving mib
counters of MP_FAIL and MP_RST.
Also did some cleanups in chk_fail_nr(), renamed two local variables
and updated the output message.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the invert bytes check for the output data in
check_transfer().
Instead of the file mismatch error:
[ FAIL ] file received by server does not match (in, out):
-rw------- 1 root root 45643832 Jan 16 15:04 /tmp/tmp.9xpM6Paivv
Trailing bytes are:
MPTCP_TEST_FILE_END_MARKER
-rw------- 1 root root 45643832 Jan 16 15:04 /tmp/tmp.wnz1Yp4u7Z
Trailing bytes are:
MPTCP_TEST_FILE_END_MARKER
Print out the inverted bytes like this:
file received by server has inverted byte at 7454789
file received by server has inverted byte at 7454790
file received by server has inverted byte at 7454791
file received by server has inverted byte at 7454792
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the self test for MP_FASTCLOSE. Reused the argument
addr_nr_ns2 of do_transfer() to pass the extra arguments '-I 2' to
mptcp_connect commands. Then mptcp_connect disconnected the
connections to trigger the MP_FASTCLOSE sending and receiving. Used
chk_fclose_nr to check the MP_FASTCLOSE mibs and used chk_rst_nr to
check the MP_RST mibs. This test used the test_linkfail value to make
1024KB test files.
The output looks like this:
Created /tmp/tmp.XB8sfv1hJ0 (size 1024 KB) containing data sent by client
Created /tmp/tmp.RtTDbzqrXI (size 1024 KB) containing data sent by server
001 fastclose test syn[ ok ] - synack[ ok ] - ack[ ok ]
ctx[ ok ] - fclzrx[ ok ]
rtx[ ok ] - rstrx [ ok ] invert
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch reused the test_linkfail values above 2 to make test files with
the given sizes (KB) for both the client side and the server side. It's
useful for the test cases using different file sizes.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using a global variable mptcp_connect, this patch added
a new local variable extra_args in do_transfer() to store the extra
arguments passing to the mptcp_connect commands.
This patch also renamed the speed level 'least' to 'speed_*'. This
more flexible way can avoid the need to add new speed levels in the
future.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
