check_result() uses "comm" to check expected results of selftests output
in dmesg. Everything works fine if timestamps in dmesg are unique. If
not, like in this example
[ 86.844422] test_klp_callbacks_demo: pre_unpatch_callback: test_klp_callbacks_mod -> [MODULE_STATE_LIVE] Normal state
[ 86.844422] livepatch: 'test_klp_callbacks_demo': starting unpatching transition
, "comm" fails with "comm: file 2 is not in sorted order". Suppress the
order checking with --nocheck-order option.
Fixes: 2f3f651f37 ("selftests/livepatch: Use "comm" instead of "diff" for dmesg")
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
With procfs v3.3.16, the sysctl command doesn't print the set key and
value on error. This change breaks livepatch selftest test-ftrace.sh,
that tests the interaction of sysctl ftrace_enabled:
Make it work with all sysctl versions using '-q' option.
Explicitly print the final status on success so that it can be verified
in the log. The error message is enough on failure.
Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20200714091030.1611-1-pmladek@suse.com
BusyBox diff doesn't support the GNU diff '--LTYPE-line-format' options
that were used in the selftests to filter older kernel log messages from
dmesg output.
Use "comm" which is more available in smaller boot environments.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200710183745.19730-1-joe.lawrence@redhat.com
Make it bit easier to parse the kernel logs during the selftests by
adding a "===== TEST: $test =====" delimiter when each individual test
begins.
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618181040.21132-4-joe.lawrence@redhat.com
The livepatch selftests currently grep on "taints" to filter out
"tainting kernel with TAINT_LIVEPATCH" messages which may be logged when
loading livepatch modules.
Further filter the log to drop "loading out-of-tree module taints
kernel" in the rare case the klp_test modules have been built
out-of-tree.
Look for the longer "taints kernel" or "tainting kernel" strings to
avoid inadvertent partial matching.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618181040.21132-3-joe.lawrence@redhat.com
Inspired by commit f131d9edc2 ("selftests/lkdtm: Don't clear dmesg
when running tests"), keep a reference dmesg copy when beginning each
test. This way check_result() can compare against the initial copy
rather than relying upon an empty log.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618181040.21132-2-joe.lawrence@redhat.com
livepatch test configures the system and debug environment to run
tests. Some of these actions fail without root access and test
dumps several permission denied messages before it exits.
Fix test-state.sh to call setup_config instead of set_dynamic_debug
as suggested by Petr Mladek <pmladek@suse.com>
Fix it to check root uid and exit with skip code instead.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since livepatching depends upon ftrace handlers to implement "patched"
code functionality, verify that the ftrace_enabled sysctl value
interacts with livepatch registration as expected. At the same time,
ensure that ftrace_enabled is set and part of the test environment
configuration that is saved and restored when running the selftests.
Link: http://lkml.kernel.org/r/20191016113316.13415-4-mbenes@suse.cz
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Livepatch selftests currently save the current dynamic debug config and
tweak it for the selftests. The config is restored at the end. Make the
infrastructure generic, so that more variables can be saved and
restored.
Link: http://lkml.kernel.org/r/20191016113316.13415-3-mbenes@suse.cz
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The livepatching self-tests tweak the dynamic debug config to verify
the kernel log during the tests. Enhance set_dynamic_debug() so that
the config changes are restored when the script exits.
Note this functionality needs to keep in sync with:
- dynamic_debug input/output formatting
- functions affected by set_dynamic_debug()
For example, push_dynamic_debug() transforms:
kernel/livepatch/transition.c:530 [livepatch]klp_init_transition =_ "'%s': initializing %s transition\012"
to the following:
file kernel/livepatch/transition.c line 530 =_
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a skip() message function that stops the test, logs an explanation,
and sets the "skip" return code (4).
Before loading a livepatch self-test kernel module, first verify that
we've built and installed it by running a 'modprobe --dry-run'. This
should catch a few environment issues, including !CONFIG_LIVEPATCH and
!CONFIG_TEST_LIVEPATCH. In these cases, exit gracefully with the new
skip() function.
Reported-by: Jiri Benc <jbenc@redhat.com>
Suggested-by: Shuah Khan <shuah@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The livepatch selftest functions.sh library uses "$*" and an
intermediate variable to extract and then pass arguments from function
to function call. The effect of this combination is that the argument
list is flattened into a single argument. Sometimes this is benign, but
in cases like __load_mod(), the modprobe invocation will interpret all
the module parameters as a single parameter.
Drop the intermediate variable and use the "$@" special parameter as
described in the bash manual.
Link: https://www.gnu.org/software/bash/manual/bash.html#Special-Parameters
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Add a few livepatch modules and simple target modules that the included
regression suite can run tests against:
- basic livepatching (multiple patches, atomic replace)
- pre/post (un)patch callbacks
- shadow variable API
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Tested-by: Miroslav Benes <mbenes@suse.cz>
Tested-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
