This patch adds self healing functionality for btree nodes - if we
notice a problem when reading a btree node, we just rewrite it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We don't want to be submitting IO with btree locks held, and btree
writes usually aren't latency sensitive.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The previous patch that fixed btree nodes being written too aggressively
now meant that we weren't sorting btree node bsets optimally - this
patch fixes that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Useful number for performance tuning.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This just drops the offending key - in the bug report where this was
seen, it was clearly a single bit memory error, and fsck will fix the
missing key.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch starts treating the bpos.snapshot field like part of the key
in the btree code:
* bpos_successor() and bpos_predecessor() now include the snapshot field
* Keys in btrees that will be using snapshots (extents, inodes, dirents
and xattrs) now always have their snapshot field set to U32_MAX
The btree iterator code gets a new flag, BTREE_ITER_ALL_SNAPSHOTS, that
determines whether we're iterating over keys in all snapshots or not -
internally, this controlls whether bkey_(successor|predecessor)
increment/decrement the snapshot field, or only the higher bits of the
key.
We add a new member to struct btree_iter, iter->snapshot: when
BTREE_ITER_ALL_SNAPSHOTS is not set, iter->pos.snapshot should always
equal iter->snapshot, which will be 0 for btrees that don't use
snapshots, and alsways U32_MAX for btrees that will use snapshots
(until we enable snapshot creation).
This patch also introduces a new metadata version number, and compat
code for reading from/writing to older versions - this isn't a forced
upgrade (yet).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With snapshots, we're going to need to differentiate between comparisons
that should and shouldn't include the snapshot field. bpos_cmp is now
the comparison function that does include the snapshot field, used by
core btree code.
Upper level filesystem code generally does _not_ want to compare against
the snapshot field - that code wants keys to compare as equal even when
one of them is in an ancestor snapshot.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Bkey noops were introduced to deal with trimming inline data extents in
place in the btree: if the u64s field of a bkey was 0, that u64 was a
noop and we'd start looking for the next bkey immediately after it.
But extent handling has been lifted above the btree - we no longer
modify existing extents in place in the btree, and the compatibilty code
for old style extent btree nodes is gone, so we can completely drop this
code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The superblock version fields need to be accurate to know whether a
filesystem is supported, thus we should be verifying them.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We keep running into occasional bugs with btree transaction iterators
overflowing - this will make those bugs more visible.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch standardizes all the enums that have associated string tables
(probably more enums should have string tables).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
KEY_TYPE_discard used to be used for extent whiteouts, but when handling
over overlapping extents was lifted above the core btree code it became
unused. This patch updates various code to reflect that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs has been aggressively migrating filesystems and btree nodes to
the new format for quite some time - this shouldn't affect anyone
anymore, and lets us delete a _lot_ of code. Also, it frees up
KEY_TYPE_discard for a new whiteout key type for snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If a ptr gen doesn't match the bucket gen, the bucket likely doesn't
contain the data we want - but it's still possible the data we want
might have been overwritten, and for btree node pointers we can verify
whether or not the node is the one we wanted with the node's sequence
number, so it's better to keep the pointer and try reading from it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a new data job type to scan for btree nodes in the old extent
format, and rewrite them.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is so that when we discover btree topology issues, we can just
update the pointer to a btree node and signal btree read path that the
min/max keys in the node header should be updated from the node pointer.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There was a race: btree node writes drop their reference on journal pins
before clearing the btree_node_write_in_flight flag.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is because we had a bug where we were writing out journal entries
with garbage last_seq, and not catching it.
Also, completely ignore jset->last_seq when JSET_NO_FLUSH is true,
because of aforementioned bug, but change the write path to set last_seq
to 0 when JSET_NO_FLUSH is true.
Minor other cleanups and comments.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With various newer key types - stripe keys, inline data extents - the
old approach of calculating the maximum size of the value is becoming
more and more error prone. Better to switch to bkey_on_stack, which can
dynamically allocate if necessary to handle any size bkey.
In particular we also want to get rid of BKEY_EXTENT_VAL_U64s_MAX.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Metadata corruption bugs are hard to debug if we can't see exactly what
went wrong - try to allocate a bigger buffer so we can print out
everything we have.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If we have an error in the btree interior update path that prevents us
from journalling the update, we can't issue the corresponding btree node
write - we didn't get a journal sequence number that would cause it to
be ignored in recovery.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
it's useful to know whether an error was for a read or a write - this
also standardizes error messages a bit more.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
tracking down a bug where we see a btree node pointer in the wrong node
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_varint_decode can do reads up to 7 bytes past the end ptr, for the
sake of performance - these extra bytes are always masked off.
This won't be a problem in practice if we make sure to burn 8 bytes in
any buffer that has bkeys in it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This lets us improve journal reclaim, so that it now tries to make sure
no more than 3/4s of the btree node cache and btree key cache are dirty
- ensuring the shrinkers can free memory.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This only did anything in two places, and those can just be replaced
wiht bkey_cmp_left_packed()).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It's not used much anymore, the module paramter interface is better.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, we would start doing btree updates before writing the first
journal entry; if this was after an unclean shutdown, this could cause
those btree updates to not be blacklisted.
Also, move some code to headers for userspace debug tools.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
printbufs know how big the buffer is that was allocated, so we can get
rid of the random PAGE_SIZEs all over the place.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We define our own BLK_STS_REMOVED, so we need our own to_str helper too.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a bug where recovery fails when one of the devices is read
only.
Also - consolidate the "must rewrite this node to insert it" behind a
new btree node flag.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Improved error messages are always a good thing
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This also consolidates the various checks in bch2_mark_pointer() and
bch2_trans_mark_pointer().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Deadlock on shutdown:
btree_update_nodes_written() unblocks btree nodes from being written;
after doing so, it has to check if they were marked as needing to be
written and if so kick off those writes - if that doesn't happen, we'll
never release journal pins and shutdown will get stuck when flushing the
journal.
There was an error path where this didn't happen, because in the error
path we don't actually want those btree nodes write to happen; however,
we still have to kick off the write path so the journal pins get
released. The btree write path checks if we're in a journal error state
and doesn't do the actual write if we are.
Also - there was another deadlock because btree_update_nodes_written()
was taking the btree update off of the unwritten_list too soon - before
getting a journal reservation, which could fail and have to be retried.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, BTREE_ID_INODES was special - inodes were indexed by the
inode field, which meant the offset field of struct bpos wasn't used,
which led to special cases in e.g. the btree iterator code.
Now, inodes in the inodes btree are indexed by the offset field.
Also: prevously min_key was special for extents btrees, min_key for
extents would equal max_key for the previous node. Now, min_key =
bkey_successor() of the previous node, same as non extent btrees.
This means we can completely get rid of
btree_type_sucessor/predecessor.
Also make some improvements to the metadata IO validate/compat code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
vmalloc allocations don't always obey GFP_NOFS - memalloc_nofs_save() is
the prefered approach for the future.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, the btree has always been self contained and internally
consistent on disk without anything from the journal - the journal just
contained pointers to the btree roots.
However, this meant that btree node split or compact operations - i.e.
anything that changes btree node topology and involves updates to
interior nodes - would require that interior btree node to be written
immediately, which means emitting a btree node write that's mostly empty
(using 4k of space on disk if the filesystemm blocksize is 4k to only
write perhaps ~100 bytes of new keys).
More importantly, this meant most btree node writes had to be FUA, and
consumer drives have a history of slow and/or buggy FUA support - other
filesystes have been bit by this.
This patch changes the interior btree update path to journal updates to
interior nodes, after the writes for the new btree nodes have completed.
Best of all, it turns out to simplify the interior node update path
somewhat.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Ever since the btree code was first written, handling of overwriting
existing extents - including partially overwriting and splittin existing
extents - was handled as part of the core btree insert path. The modern
transaction and iterator infrastructure didn't exist then, so that was
the only way for it to be done.
This patch moves that outside of the core btree code to a pass that runs
at transaction commit time.
This is a significant simplification to the btree code and overall
reduction in code size, but more importantly it gets us much closer to
the core btree code being completely independent of extents and is
important prep work for snapshots.
This introduces a new feature bit; the old and new extent update models
are incompatible when the filesystem needs journal replay.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new btree ptr type which contains the sequence number (random 64
bit cookie, actually) for that btree node - this lets us verify that
when we read in a btree node it really is the btree node we wanted.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is partly prep work for introducing bch_btree_ptr_v2, but it'll
also be a bit of a performance boost by moving the full key out of the
hot part of struct btree.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
