In its infinite wisdom, by default, SLang sets susp undef, and this can
only be un-done by calling SLtty_set_suspend_state(true). After every
SLang_init_tty().
Additionally, no provisions are made for maintaining the teletype
attributes across suspend/continue (outside of curses emulation
mode(?!), which provides full support, naturally), so we need to save
and restore the flags ourselves, as well as reset the text colours when
going under. We need to also re-draw the screen, and raising SIGWINCH,
shockingly, Just Works.
The correct solution would be to Not Use SLang, but as a stop-gap,
this makes TUI 'perf report' usable.
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yaowenbin <yaowenbin1@huawei.com>
Link: https://lore.kernel.org/r/0354dcae23a8713f75f4fed609e0caec3c6e3cd5.1672174189.git.nabijaczleweli@nabijaczleweli.xyz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update to v1.17 released in:
https://github.com/intel/perfmon/pull/123
Add events FP_ARITH_DISPATCHED.V0, FP_ARITH_DISPATCHED.V1,
FP_ARITH_DISPATCHED.V2, UNC_IIO_IOMMU0.1G_HITS, UNC_IIO_IOMMU0.2M_HITS
and UNC_IIO_IOMMU0.4K_HITS. Description updates.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update to v1.23 released in:
https://github.com/intel/perfmon/pull/123
Updates to event descriptions.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update to v1.02 released in:
https://github.com/intel/perfmon/pull/123
Removes events AMX_OPS_RETIRED.BF16 and AMX_OPS_RETIRED.INT8. Add
events FP_ARITH_DISPATCHED.V0, FP_ARITH_DISPATCHED.V1,
FP_ARITH_DISPATCHED.V2, UNC_IIO_IOMMU0.1G_HITS, UNC_IIO_IOMMU0.2M_HITS
and UNC_IIO_IOMMU0.4K_HITS. Description updates.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix that the core PMU is being specified for 2 uncore events. Specify
a PMU for the alderlake UNCORE_FREQ metric.
Conversion script updated in:
https://github.com/intel/perfmon/pull/126
Committer testing:
Before this patch the "perf all metricgroups test" was failing, now:
root@number:~# perf test metric
10: PMU events :
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
10.5: Parsing of metric thresholds with fake PMUs : Ok
61: Parse and process metrics : Ok
98: perf stat metrics (shadow stat) test : Skip
101: perf all metricgroups test : Ok
102: perf all metrics test : FAILED!
107: perf metrics value validation : Ok
root@number:~#
Test 102 is failing for another reason, not being able to get as many
counters as needed, Ian Rogers suggested disabling the NMI watchdog to
have more counters available:
root@number:/home/acme# cat /proc/sys/kernel/nmi_watchdog
1
root@number:/home/acme# echo 0 > /proc/sys/kernel/nmi_watchdog
root@number:/home/acme# perf test 102
102: perf all metrics test : Ok
root@number:/home/acme#
Closes: https://lore.kernel.org/lkml/ZZWOdHXJJ_oecWwm@kernel.org/
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* for-next/selftests:
kselftest/arm64: Don't probe the current VL for unsupported vector types
kselftest/arm64: Log SVCR when the SME tests barf
kselftest/arm64: Improve output for skipped TPIDR2 ABI test
Add a test validating that libbpf uploads BTF and func_info with
rewritten type information for arguments of global subprogs that are
marked with __arg_ctx tag.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a few extra cases of global funcs with context arguments. This time
rely on "arg:ctx" decl_tag (__arg_ctx macro), but put it next to
"classic" cases where context argument has to be of an exact type that
BPF verifier expects (e.g., bpf_user_pt_regs_t for kprobe/uprobe).
Colocating all these cases separately from other global func args that
rely on arg:xxx decl tags (in verifier_global_subprogs.c) allows for
simpler backwards compatibility testing on old kernels. All the cases in
test_global_func_ctx_args.c are supposed to work on older kernels, which
was manually validated during development.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Out of all special global func arg tag annotations, __arg_ctx is
practically is the most immediately useful and most critical to have
working across multitude kernel version, if possible. This would allow
end users to write much simpler code if __arg_ctx semantics worked for
older kernels that don't natively understand btf_decl_tag("arg:ctx") in
verifier logic.
Luckily, it is possible to ensure __arg_ctx works on old kernels through
a bit of extra work done by libbpf, at least in a lot of common cases.
To explain the overall idea, we need to go back at how context argument
was supported in global funcs before __arg_ctx support was added. This
was done based on special struct name checks in kernel. E.g., for
BPF_PROG_TYPE_PERF_EVENT the expectation is that argument type `struct
bpf_perf_event_data *` mark that argument as PTR_TO_CTX. This is all
good as long as global function is used from the same BPF program types
only, which is often not the case. If the same subprog has to be called
from, say, kprobe and perf_event program types, there is no single
definition that would satisfy BPF verifier. Subprog will have context
argument either for kprobe (if using bpf_user_pt_regs_t struct name) or
perf_event (with bpf_perf_event_data struct name), but not both.
This limitation was the reason to add btf_decl_tag("arg:ctx"), making
the actual argument type not important, so that user can just define
"generic" signature:
__noinline int global_subprog(void *ctx __arg_ctx) { ... }
I won't belabor how libbpf is implementing subprograms, see a huge
comment next to bpf_object_relocate_calls() function. The idea is that
each main/entry BPF program gets its own copy of global_subprog's code
appended.
This per-program copy of global subprog code *and* associated func_info
.BTF.ext information, pointing to FUNC -> FUNC_PROTO BTF type chain
allows libbpf to simulate __arg_ctx behavior transparently, even if the
kernel doesn't yet support __arg_ctx annotation natively.
The idea is straightforward: each time we append global subprog's code
and func_info information, we adjust its FUNC -> FUNC_PROTO type
information, if necessary (that is, libbpf can detect the presence of
btf_decl_tag("arg:ctx") just like BPF verifier would do it).
The rest is just mechanical and somewhat painful BTF manipulation code.
It's painful because we need to clone FUNC -> FUNC_PROTO, instead of
reusing it, as same FUNC -> FUNC_PROTO chain might be used by another
main BPF program within the same BPF object, so we can't just modify it
in-place (and cloning BTF types within the same struct btf object is
painful due to constant memory invalidation, see comments in code).
Uploaded BPF object's BTF information has to work for all BPF
programs at the same time.
Once we have FUNC -> FUNC_PROTO clones, we make sure that instead of
using some `void *ctx` parameter definition, we have an expected `struct
bpf_perf_event_data *ctx` definition (as far as BPF verifier and kernel
is concerned), which will mark it as context for BPF verifier. Same
global subprog relocated and copied into another main BPF program will
get different type information according to main program's type. It all
works out in the end in a completely transparent way for end user.
Libbpf maintains internal program type -> expected context struct name
mapping internally. Note, not all BPF program types have named context
struct, so this approach won't work for such programs (just like it
didn't before __arg_ctx). So native __arg_ctx is still important to have
in kernel to have generic context support across all BPF program types.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With all the preparations in previous patches done we are ready to
postpone BTF loading and sanitization step until after all the
relocations are performed.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move the logic of finding and assigning exception callback indices from
BTF sanitization step to program relocations step, which seems more
logical and will unblock moving BTF loading to after relocation step.
Exception callbacks discovery and assignment has no dependency on BTF
being loaded into the kernel, it only uses BTF information. It does need
to happen before subprogram relocations happen, though. Which is why the
split.
No functional changes.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move map creation to later during BPF object loading by pre-creating
stable placeholder FDs (utilizing memfd_create()). Use dup2()
syscall to then atomically make those placeholder FDs point to real
kernel BPF map objects.
This change allows to delay BPF map creation to after all the BPF
program relocations. That, in turn, allows to delay BTF finalization and
loading into kernel to after all the relocations as well. We'll take
advantage of the latter in subsequent patches to allow libbpf to adjust
BTF in a way that helps with BPF global function usage.
Clean up a few places where we close map->fd, which now shouldn't
happen, because map->fd should be a valid FD regardless of whether map
was created or not. Surprisingly and nicely it simplifies a bunch of
error handling code. If this change doesn't backfire, I'm tempted to
pre-create such stable FDs for other entities (progs, maybe even BTF).
We previously did some manipulations to make gen_loader work with fake
map FDs, with stable map FDs this hack is not necessary for maps (we
still have it for BTF, but I left it as is for now).
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With the upcoming switch to preallocated placeholder FDs for maps,
switch various getters/setter away from checking map->fd. Use
map_is_created() helper that detect whether BPF map can be modified based
on map->obj->loaded state, with special provision for maps set up with
bpf_map__reuse_fd().
For backwards compatibility, we take map_is_created() into account in
bpf_map__fd() getter as well. This way before bpf_object__load() phase
bpf_map__fd() will always return -1, just as before the changes in
subsequent patches adding stable map->fd placeholders.
We also get rid of all internal uses of bpf_map__fd() getter, as it's
more oriented for uses external to libbpf. The above map_is_created()
check actually interferes with some of the internal uses, if map FD is
fetched through bpf_map__fd().
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of inferring whether map already point to previously
created/pinned BPF map (which user can specify with bpf_map__reuse_fd()) API),
use explicit map->reused flag that is set in such case.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It makes future grepping and code analysis a bit easier.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a selftest to capture the verification failure when the allocation
size is greater than 512.
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231222031812.1293190-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the previous patch, the maximum data size for bpf_global_percpu_ma
is 512 bytes. This breaks selftest test_bpf_ma. The test is adjusted
in two aspects:
- Since the maximum allowed data size for bpf_global_percpu_ma is
512, remove all tests beyond that, names sizes 1024, 2048 and 4096.
- Previously the percpu data size is bucket_size - 8 in order to
avoid percpu allocation into the next bucket. This patch removed
such data size adjustment thanks to Patch 1.
Also, a better way to generate BTF type is used than adding
a member to the value struct.
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231222031807.1292853-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The patch set [1] added a general lib.sh in net selftests, and converted
several test scripts to source the lib.sh.
unicast_extensions.sh (converted in [1]) and pmtu.sh (converted in [2])
have a /bin/sh shebang which may point to various shells in different
distributions, but "source" is only available in some of them. For
example, "source" is a built-it function in bash, but it cannot be
used in dash.
Refer to other scripts that were converted together, simply change the
shebang to bash to fix the following issues when the default /bin/sh
points to other shells.
not ok 51 selftests: net: unicast_extensions.sh # exit=1
v1 -> v2:
- Fix pmtu.sh which has the same issue as unicast_extensions.sh,
suggested by Hangbin
- Change the style of the "source" line to be consistent with other
tests, suggested by Hangbin
Link: https://lore.kernel.org/all/20231202020110.362433-1-liuhangbin@gmail.com/ [1]
Link: https://lore.kernel.org/all/20231219094856.1740079-1-liuhangbin@gmail.com/ [2]
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 378f082eaf ("selftests/net: convert pmtu.sh to run it in unique namespace")
Fixes: 0f4765d0b4 ("selftests/net: convert unicast_extensions.sh to run it in unique namespace")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20231229131931.3961150-1-yujie.liu@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test that replaces the same socket with itself. This exercises a
corner case where old element and new element have the same posck.
Test protocols: TCP, UDP, stream af_unix and dgram af_unix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-6-john.fastabend@gmail.com
Add test with multiple maps where each socket is inserted in multiple
maps. Test protocols: TCP, UDP, stream af_unix and dgram af_unix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-5-john.fastabend@gmail.com
Add test with a single map where each socket is inserted multiple
times. Test protocols: TCP, UDP, stream af_unix and dgram af_unix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-4-john.fastabend@gmail.com
The cpu-cycles event is both a legacy event and declared in
/sys/devices/cpu_core/events/cpu-cycles. The cycles event is a legacy
event but with no sysfs version.
Add a test that the sysfs version is preferred to the legacy for
cpu-cycles, while for cycles we use the legacy version.
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240103170159.1435753-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The legacy events cpu-cycles and instructions have sysfs event
equivalents on x86 (see /sys/devices/cpu_core/events).
As sysfs/JSON events are now higher in priority than legacy events this
causes the hybrid test expectations not to be met.
To fix this switch to legacy events that don't have sysfs versions,
namely cpu-cycles becomes cycles and instructions becomes branches.
Fixes: a24d9d9dc0 ("perf parse-events: Make legacy events lower priority than sysfs/JSON")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Closes: https://lore.kernel.org/lkml/ZYbm5L7tw7bdpDpE@kernel.org/
Link: https://lore.kernel.org/r/20240103170159.1435753-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the jevents parser aware of the Unified Memory Controller (UMC) PMU
and add events taken from Section 8.2.1 "UMC Performance Monitor Events"
of the Processor Programming Reference (PPR) for AMD Family 19h Model 11h
processors. The events capture UMC command activity such as CAS, ACTIVATE,
PRECHARGE etc. while the metrics derive data bus utilization and memory
bandwidth out of these events.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/e0d8a7e8ca8ee3e378d8029e80b456ac327d6419.1701238314.git.sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copy-paste error where LL cache misses are reported as l1i.
Fixes: 0a57b91080 ("perf stat: Use counts rather than saved_value")
Suggested-by: Guillaume Endignoux <guillaumee@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231211181242.1721059-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reduce from PERF_SAMPLE_MAX_SIZE to "sizeof(*lost) +
session->machines.host.id_hdr_size".
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207021627.1322884-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add variants of perf_env__insert_bpf_prog_info(), perf_env__insert_btf()
and perf_env__find_btf prefixed with __ to indicate the
env->bpf_progs.lock is assumed held.
Call these variants when the lock is held to avoid recursively taking it
and potentially having a thread deadlock with itself.
Fixes: f8dfeae009 ("perf bpf: Show more BPF program info in print_bpf_prog_info()")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20231207014655.1252484-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_nop_mov(var) asm macro emits nop register move: rX = rX.
If 'var' is a scalar and not a fixed constant the verifier will assign ID to it.
If it's later spilled the stack slot will carry that ID as well.
Hence the range refining comparison "if rX < const" will update all copies
including spilled slot.
This macro is a temporary workaround until the verifier gets smarter.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231226191148.48536-6-alexei.starovoitov@gmail.com
Since the last user was converted to bpf_cmp, remove bpf_assert_eq/ne/... macros.
__bpf_assert_op() macro is kept for experiments, since it's slightly more efficient
than bpf_assert(bpf_cmp_unlikely()) until LLVM is fixed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20231226191148.48536-5-alexei.starovoitov@gmail.com
Convert exceptions_assert.c to bpf_cmp_unlikely() macro.
Since
bpf_assert(bpf_cmp_unlikely(var, ==, 100));
other code;
will generate assembly code:
if r1 == 100 goto L2;
r0 = 0
call bpf_throw
L1:
other code;
...
L2: goto L1;
LLVM generates redundant basic block with extra goto. LLVM will be fixed eventually.
Right now it's less efficient than __bpf_assert(var, ==, 100) macro that produces:
if r1 == 100 goto L1;
r0 = 0
call bpf_throw
L1:
other code;
But extra goto doesn't hurt the verification process.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20231226191148.48536-4-alexei.starovoitov@gmail.com
Compilers optimize conditional operators at will, but often bpf programmers
want to force compilers to keep the same operator in asm as it's written in C.
Introduce bpf_cmp_likely/unlikely(var1, conditional_op, var2) macros that can be used as:
- if (seen >= 1000)
+ if (bpf_cmp_unlikely(seen, >=, 1000))
The macros take advantage of BPF assembly that is C like.
The macros check the sign of variable 'seen' and emits either
signed or unsigned compare.
For example:
int a;
bpf_cmp_unlikely(a, >, 0) will be translated to 'if rX s> 0 goto' in BPF assembly.
unsigned int a;
bpf_cmp_unlikely(a, >, 0) will be translated to 'if rX > 0 goto' in BPF assembly.
C type conversions coupled with comparison operator are tricky.
int i = -1;
unsigned int j = 1;
if (i < j) // this is false.
long i = -1;
unsigned int j = 1;
if (i < j) // this is true.
Make sure BPF program is compiled with -Wsign-compare then the macros will catch
the mistake.
The macros check LHS (left hand side) only to figure out the sign of compare.
'if 0 < rX goto' is not allowed in the assembly, so the users
have to use a variable on LHS anyway.
The patch updates few tests to demonstrate the use of the macros.
The macro allows to use BPF_JSET in C code, since LLVM doesn't generate it at
present. For example:
if (i & j) compiles into r0 &= r1; if r0 == 0 goto
while
if (bpf_cmp_unlikely(i, &, j)) compiles into if r0 & r1 goto
Note that the macros has to be careful with RHS assembly predicate.
Since:
u64 __rhs = 1ull << 42;
asm goto("if r0 < %[rhs] goto +1" :: [rhs] "ri" (__rhs));
LLVM will silently truncate 64-bit constant into s32 imm.
Note that [lhs] "r"((short)LHS) the type cast is a workaround for LLVM issue.
When LHS is exactly 32-bit LLVM emits redundant <<=32, >>=32 to zero upper 32-bits.
When LHS is 64 or 16 or 8-bit variable there are no shifts.
When LHS is 32-bit the (u64) cast doesn't help. Hence use (short) cast.
It does _not_ truncate the variable before it's assigned to a register.
Traditional likely()/unlikely() macros that use __builtin_expect(!!(x), 1 or 0)
have no effect on these macros, hence macros implement the logic manually.
bpf_cmp_unlikely() macro preserves compare operator as-is while
bpf_cmp_likely() macro flips the compare.
Consider two cases:
A.
for() {
if (foo >= 10) {
bar += foo;
}
other code;
}
B.
for() {
if (foo >= 10)
break;
other code;
}
It's ok to use either bpf_cmp_likely or bpf_cmp_unlikely macros in both cases,
but consider that 'break' is effectively 'goto out_of_the_loop'.
Hence it's better to use bpf_cmp_unlikely in the B case.
While 'bar += foo' is better to keep as 'fallthrough' == likely code path in the A case.
When it's written as:
A.
for() {
if (bpf_cmp_likely(foo, >=, 10)) {
bar += foo;
}
other code;
}
B.
for() {
if (bpf_cmp_unlikely(foo, >=, 10))
break;
other code;
}
The assembly will look like:
A.
for() {
if r1 < 10 goto L1;
bar += foo;
L1:
other code;
}
B.
for() {
if r1 >= 10 goto L2;
other code;
}
L2:
The bpf_cmp_likely vs bpf_cmp_unlikely changes basic block layout, hence it will
greatly influence the verification process. The number of processed instructions
will be different, since the verifier walks the fallthrough first.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20231226191148.48536-3-alexei.starovoitov@gmail.com
GCC's -Wall includes -Wsign-compare while clang does not.
Since BPF programs are built with clang we need to add this flag explicitly
to catch problematic comparisons like:
int i = -1;
unsigned int j = 1;
if (i < j) // this is false.
long i = -1;
unsigned int j = 1;
if (i < j) // this is true.
C standard for reference:
- If either operand is unsigned long the other shall be converted to unsigned long.
- Otherwise, if one operand is a long int and the other unsigned int, then if a
long int can represent all the values of an unsigned int, the unsigned int
shall be converted to a long int; otherwise both operands shall be converted to
unsigned long int.
- Otherwise, if either operand is long, the other shall be converted to long.
- Otherwise, if either operand is unsigned, the other shall be converted to unsigned.
Unfortunately clang's -Wsign-compare is very noisy.
It complains about (s32)a == (u32)b which is safe and doen't have surprising behavior.
This patch fixes some of the issues. It needs a follow up to fix the rest.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20231226191148.48536-2-alexei.starovoitov@gmail.com
This patch adds a test for the condition that the previous patch mucked
with - illegal zero-sized helper memory access. As opposed to existing
tests, this new one uses a size whose lower bound is zero, as opposed to
a known-zero one.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231221232225.568730-3-andreimatei1@gmail.com
This patch simplifies the verification of size arguments associated to
pointer arguments to helpers and kfuncs. Many helpers take a pointer
argument followed by the size of the memory access performed to be
performed through that pointer. Before this patch, the handling of the
size argument in check_mem_size_reg() was confusing and wasteful: if the
size register's lower bound was 0, then the verification was done twice:
once considering the size of the access to be the lower-bound of the
respective argument, and once considering the upper bound (even if the
two are the same). The upper bound checking is a super-set of the
lower-bound checking(*), except: the only point of the lower-bound check
is to handle the case where zero-sized-accesses are explicitly not
allowed and the lower-bound is zero. This static condition is now
checked explicitly, replacing a much more complex, expensive and
confusing verification call to check_helper_mem_access().
Error messages change in this patch. Before, messages about illegal
zero-size accesses depended on the type of the pointer and on other
conditions, and sometimes the message was plain wrong: in some tests
that changed you'll see that the old message was something like "R1 min
value is outside of the allowed memory range", where R1 is the pointer
register; the error was wrongly claiming that the pointer was bad
instead of the size being bad. Other times the information that the size
came for a register with a possible range of values was wrong, and the
error presented the size as a fixed zero. Now the errors refer to the
right register. However, the old error messages did contain useful
information about the pointer register which is now lost; recovering
this information was deemed not important enough.
(*) Besides standing to reason that the checks for a bigger size access
are a super-set of the checks for a smaller size access, I have also
mechanically verified this by reading the code for all types of
pointers. I could convince myself that it's true for all but
PTR_TO_BTF_ID (check_ptr_to_btf_access). There, simply looking
line-by-line does not immediately prove what we want. If anyone has any
qualms, let me know.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231221232225.568730-2-andreimatei1@gmail.com
Test the RISCV_HWPROBE_WHICH_CPUS flag of hwprobe. The test also
has a command line interface in order to get the cpu list for
arbitrary hwprobe pairs.
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231122164700.127954-10-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The "count" parameter associated with the 'cpus' parameter of the
hwprobe syscall is the size in bytes of 'cpus'. Naming it 'cpu_count'
may mislead users (it did me) to think it's the number of CPUs that
are or can be represented by 'cpus' instead. This is particularly
easy (IMO) to get wrong since 'cpus' is documented to be defined by
CPU_SET(3) and CPU_SET(3) also documents a CPU_COUNT() (the number
of CPUs in set) macro. CPU_SET(3) refers to the size of cpu sets
with 'setsize'. Adopt 'cpusetsize' for the hwprobe parameter and
specifically state it is in bytes in Documentation/riscv/hwprobe.rst
to clarify.
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231122164700.127954-7-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
-----BEGIN PGP SIGNATURE-----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=FeiG
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.8-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.8 part #1
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
Commit 051d442098 ("net/sched: Retire CBQ qdisc") retired the CBQ qdisc.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit fb38306ceb ("net/sched: Retire ATM qdisc") retired the ATM qdisc.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit bbe77c14ee ("net/sched: Retire dsmark qdisc") retired the dsmark
classifier. Remove UAPI support for it.
Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 8c710f7525 ("net/sched: Retire tcindex classifier") retired the TC
tcindex classifier.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 265b4da82d ("net/sched: Retire rsvp classifier") retired the TC RSVP
classifier.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to commit be80942465 ("selftests: bonding: do not set port down
before adding to bond"). The bond-arp-interval-causes-panic test failed
after commit a4abfa627c ("net: rtnetlink: Enslave device before bringing
it up") as the kernel will set the port down _after_ adding to bond if setting
port down specifically.
Fix it by removing the link down operation when adding to bond.
Fixes: 2ffd57327f ("selftests: bonding: cause oops in bond_rr_gen_slave_id")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new helper chk_msk_cestab() to check the current
established connections counter MIB_CURRESTAB in diag.sh. Invoke it
to check the counter during the connection after every chk_msk_inuse().
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new helper chk_cestab_nr() to check the current
established connections counter MIB_CURRESTAB. Set the newly added
variables cestab_ns1 and cestab_ns2 to indicate how many connections
are expected in ns1 or ns2.
Invoke check_cestab() to check the counter during the connection in
do_transfer() and invoke chk_cestab_nr() to re-check it when the
connection closed. These checks are embedded in add_tests().
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit f5769faeec ("net: Namespace-ify sysctl_optmem_max")
optmem_max is per-netns, so need of switching to root namespace.
It seems trivial to keep the old logic working, so going to keep it for
a while (at least, until kernel with netns-optmem_max will be release).
Currently, there is a test that checks that optmem_max limit applies to
TCP-AO keys and a little benchmark that measures linked-list TCP-AO keys
scaling, those are fixed by this.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
