Units in the GDS block default to allowing all VMIDs access to all
entries. Disable shader access to the GDS, GWS, and OA blocks from all
compute and gfx VMIDs by default. For compute, HWS firmware will set
up the access bits for the appropriate VMID when a compute queue
requires access to these blocks.
The driver will handle enabling access on-demand for graphics VMIDs.
Leaving VMID0 with full access because otherwise HWS cannot save or
restore values during task switch.
v2: Fixed code and comment styling.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GDS and GWS blocks default to allowing all VMIDs to
access all entries. Graphics VMIDs can handle setting
these limits when the driver launches work. However,
compute workloads under HWS control don't go through the
kernel driver. Instead, HWS firmware should set these
limits when a process is put into a VMID slot.
Disable access to these devices by default by turning off
all mask bits (for OA) and setting BASE=SIZE=0 (for GDS
and GWS) for all compute VMIDs. If a process wants to use
these resources, they can request this from the HWS
firmware (when such capabilities are enabled). HWS will
then handle setting the base and limit for the process when
it is assigned to a VMID.
This will also prevent user kernels from getting 'stuck' in
GWS by accident if they write GWS-using code but HWS
firmware is not set up to handle GWS reset. Until HWS is
enabled to handle GWS properly, all GWS accesses will
MEM_VIOL fault the kernel.
v2: Move initialization outside of SRBM mutex
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The number of GFXHUB/MMHUB may be expanded in later ASICs.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based on navi10 gfxoff logic, enable the related code
path for navi14.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
max fifo size is 128 and PA_SC_FIFO_SIZE[20:15]=SC_HIZ_TILE_FIFO_SIZE
field is programmed in units of two entries, but 6 bits is insufficient
to hold value 128/2 = 64, so set this field as 0 which is interpreted by
the hardware as maximum physical fifo size(128).
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Updated settings from hw team.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as navi10.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as navi10.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be filled in once available.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for navi14 CP firmware files.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prefetch mode 0 is not supported and can lead to hangs with certain very
specific code patterns. Set a sound prefetch mode for all VMIDs rather
than forcing all shaders to set the prefetch mode at the beginning.
Reduce code duplication a bit while we're at it. Note that the 64-bit
address mode enum and the retry all enum are both 0, so the only
functional change is in the INITIAL_INST_PREFETCH field.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ability to select GFX GRBM me/pipe/queue/vmid was missing from
the gfx10 driver. This patch adds it. Used by the debugfs register
interface to select GFX resources when read/writing registers.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This RELEASE_MEM use has the Release semantic, which means we should write
back but not invalidate. Invalidations only make sense with the Acquire
semantic (ACQUIRE_MEM), or when RELEASE_MEM is used to do the combined
Acquire-Release semantic, which is a barrier, not a fence.
The undesirable side effect of doing invalidations for the Release semantic
is that it invalidates caches while shaders are running, because the Release
can execute in the middle of the next IB.
UMDs should use ACQUIRE_MEM at the beginning of IBs. Doing cache
invalidations for a fence (like in this case) doesn't do anything
for correctness.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the gfx10 equivalent of the gfx9 code.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: update emit_ib_size
(though it's still wrong because it was wrong before)
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The buf swap field doesn't exist on RB1.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gfxoff brings unstability, disable it by default
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CSIB BO is required to be pinned down to guarantee
bo is always valid when resume, and to be unpinned it
so that its content can be saved during suspend.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The following KIQ ring test could guarantee the previous unmap
has been done.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU requires to interact with RLC when disable all features,
so RLC shouldn't be disabled ahead of SMU.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx_v10_0_kiq_enable_kgq() is called only when async_gfx_ring is
enabled, so should gfx_v10_0_kiq_disable_kgq().
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
we already selected se/sh at the beginning of the for loop
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1). use PREEMPT_QUEUE instead of RESET_QUEUE for gfx ring disablement.
2). Need wait for unmapping queue done before continue execution.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Tianci Yin <tianci.yin@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add new registers: mmCGTT_SPI_CLK_CTRL, mmDB_DEBUG3 and
mmGL2C_CGTT_SCLK_CTRL.
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX is the graphics and compute block on the GPU.
v1: add initial gfx v10 implementation (Ray)
v2: convert to new get_vm_pde function in emit_vm_flush (Hawking)
v3: switch to new emit ib interfaces (Hawking)
v4: squash in updates (Alex)
v5: remove unused variables (Alex)
v6: v6: some golden regs moved to vbios (Alex)
v7: squash in some cleanups (Alex)
v8: squash in golden settings update (Alex)
v9: squash in whitespace fixes (Ernst Sjöstrand, Alex)
v10: squash in GDS backup size fix and GDS/GWS/OA removal rebase fixes (Hawking)
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
