[Why & How]
HDMI TMDS does not have ODM support. Filtering 420 modes that
exceed the 4096 FMT limitation on DCN31 will resolve
intermittent corruptions issues.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Revert commit 6917b0b711 ("drm/amd/display: Read down-spread percentage from lut to adjust dprefclk.")
This change was causing 240hz display to not light up after s0i3.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
With previous ODM + MPO policy we will only allocate pipes when MPO plane
has intersection with current ODM slice. With this policy we have to indicate
scaling change when plane clip is updated in case plane clip change causes
MPO plane to go in or out current ODM slice.
With new ODM + MPO policy we allocate pipe independent from plane clip size
so we no longer treat it as a scaling change. There no need to do a full update
due to clip size change anymore.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
For timing with large v addressable visual confirm is just too small. It is difficult
to tell visually which DPP we are using. On the other hand with timing with small
v addressable visual confirm is too large and covers the UI area.
[how]
We calculate visual confirm dpp height offset based on v addressable so it stays
relatively the same height i.e. 1/240 verticle portion of the screen.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Preivous algorithm for finding an optimal idle pipe for a new plane was
implemented to handle dynamic pipe allocation when MPO plane moves
from one ODM slice to the other. Now pipe allocation is more static so
it no longer depends on the MPO plane's position. We are simplifying
our logic and remove unnecessary handling in our code.
[how]
Apply a new simplified version of pipe resource allocation logic to reduce
unnecessary flip delay caused by swapping secondary dpp pipe to other
MPC blending tree.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We only acquire MPO pipe for blending tree where the plane clip will
be rendered. If an MPO plane is outside current ODM slice rect, we will
skip pipe allocation. With new programming policy we want to allocate
pipes for every ODM slice blending tree even for those whose ODM slice
rect doesn't intersect with plane clip. This is aligned with DML validation
so the pipe topology is programmed independently from the plane's
position and dst plane size.
[how]
- Remove the logic to allocate pipe only when the MPO plane intersects
with ODM slice and replace with the new logic to always allocate pipes.
- Remove the logic to tear down ODM configuration in favor for supporting
secondary MPO planes.
- Remove the logic to use full update when MPO goes accross ODM slice
boundary.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
If plane clip is outside current pipe's ODM slice rect, our logic will
fail validation because we assume that when a pipe is acquired
to support a plane clip, it must blend some portion of the plane
on the screen. This assumption needs to be changed.
When a pipe is acquired to render the plane, we are now allowing
it to support a case where it can take minimum viewport and draw
with zero recout size when the plane clip is outside current ODM
slice rect. The reason is that we want to allocate and get the pipe
pre-programmed so it is ready to be rendered when user moves
the plane over to the current ODM slice with a fast update.
Whereas with the existing solution when user moves the plane
over, we will need to allocate a pipe as needed and power it up
and program it through a full update. This not only impacts the
user experience with unnecessary delay of a frame but also
doesn't generate any benefit to the user because DML doesn't
support it. DML will invalidate based on worst case scenario and
it doesn't depend on the plane location. So having our
programming sequence support such dynamic pipe allocation is
not meaningful anyway.
[how]
In build scaler params allow recout to be zero size and if viewport
is smaller than minimum, set minimum viewport size.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Flash of corruption observed when UCLK switching after transitioning
from DTBCLK to DPREFCLK on subVP(DP) + subVP(HDMI) config
Scenario where DPREFCLK is required instead of DTBCLK is not expected
[How]
Always set the DTBCLK source as DTBCLK0
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Front-end would be programmed using the stream update flags set
from the previous update and the full update should be triggered
whenever commit_state_no_check gets called.
[How]
Set all stream update flags before programming the front-end
Clear all flags that got set to avoid redundant programming
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the mpc32 functions available for future DCNs to use
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wesley Chalmers <wesley.chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently, when insert_plane is called with insert_above_mpcc
parameter that is equal to tree->opp_list, the function returns NULL.
[HOW]
Instead, the function should insert the plane at the top of the tree.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wesley Chalmers <wesley.chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPIA traces from DMUB is not enabled by default, which is
less convenient to debug DPIA related issues because we have
to resort to other means to enable DPIA trace.
[How]
Reuse existing DC debug mask to enable DPIA trace log from
kernel command line. This makes debugging DPIA issues easier
especially when system power state (suspend/reboot) is involved.
To turn on DPIA trace, simply add "amdgpu.dcdebugmask=0x80" to
kernel command line.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPIA traces from DMUB is not enabled by default, which is
less convenient to debug DPIA related issues because we have
to resort to other debug tools to enable DPIA trace.
[How]
Exposes interfaces to update trace mask from the DMUB GPINT commands.
Also provides DC implementations to enable DPIA trace.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There was unfortunately a coding mistake. It gets caught with an ultrawide monitor
that requires ODM 4:1 combine. We are blanking or unblanking pixel data we
are supposed to enumerate through all ODM pipes and program DPG for each
of those pipes. However the coding mistake causes us to program only the
first and last ODM pipes.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should be checking to see if async flips are supported in
amdgpu_dm_atomic_check() (i.e. not dm_crtc_helper_atomic_check()). Also,
async flipping isn't supported if a plane's framebuffer changes memory
domains during an atomic commit. So, move the check from
dm_crtc_helper_atomic_check() to amdgpu_dm_atomic_check() and check if
the memory domain has changed in amdgpu_dm_atomic_check().
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2733
Fixes: c1e18c44dc ("drm/amd/display: only accept async flips for fast updates")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need certain conditions for replay to be enabled, so create an
interface in DM to enable/disable replay.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 5b29369b54.
This patch causes IGT test case 'kms_atomic@plane-immutable-zpos' to
fail on AMDGPU hardware.
Cc: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Nicholas Choi <Nicholas.Choi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Add new interface for notifying OS of cursor support changes
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't set predefined degamma curve to cursor plane if the cursor
attribute flag is not set. Applying a degamma curve to the cursor by
default breaks userspace expectation. Checking the flag before
performing any color transformation prevents too dark cursor gamma in
DCN3+ on many Linux desktop environment (KDE Plasma, GNOME,
wlroots-based, etc.) as reported at:
- https://gitlab.freedesktop.org/drm/amd/-/issues/1513
This is the same approach followed by DCN2 drivers where the issue is
not present.
Fixes: 03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1513
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add various functions for replay, such as construct, destroy, enable
get_state, and copy_setting etc. These functions communicate with the
firmware to setup and enable panel replay
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some instances, the GPU is transmitting repeated frame to the sink
without any updates or changes in the content. These repeat transmission
are wasteful, resulting in power draw in different aspects of the system
1. DCN is fetching the frame of data from DF/UMC/DRAM. This memory traffic
prevents power down of parts of this HW path.
2. GPU is transmitting pixel data to the display through the main link of
the DisplayPort interface. This prevents power down of both the Source
transmitter (TX) and the Sink receiver (RX)
The concepts of utilizing replay is similar to PSR, but there is a benefit of:
Source and Sink remaining synchronized which allows for
- lower latency when switching from replay to live frames
- enable the possibility of more use cases
- easy control of the sink's refresh rate during replay
Due to Source and Sink remaining timing synchronized, Replay can be activated
in more UI scenarios.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some systems are only connected by HDMI or DP, so warning related to
missing eDP is unnecessary. Downgrade to debug instead.
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Fixes: 6d9b6dceaa ("drm/amd/display: only warn once in dce110_edp_wait_for_hpd_ready()")
Reported-by: Mastan.Katragadda@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Symclk should be based on link_enc_inst, and symclk_fe_sel should be based
on stream_enc_inst.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Using dig_stream_mapper, program symclk_en and symclk_fe_src_sel when
enabling or disabling the corresponding stream.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users report a white flickering screen on multiple systems that
is tied to having 64GB or more memory. When S/G is enabled pages
will get pinned to both VRAM carve out and system RAM leading to
this.
Until it can be fixed properly, disable S/G when 64GB of memory or
more is detected. This will force pages to be pinned into VRAM.
This should fix white screen flickers but if VRAM pressure is
encountered may lead to black screens. It's a trade-off for now.
Fixes: 81d0bcf990 ("drm/amdgpu: make display pinning more flexible (v2)")
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: <stable@vger.kernel.org> # 6.1.y: bf0207e172 ("drm/amdgpu: add S/G display parameter")
Cc: <stable@vger.kernel.org> # 6.4.y
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2735
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This error path needs to unlock the "aconnector->handle_mst_msg_ready"
mutex before returning.
Fixes: 4f6d9e38c4 ("drm/amd/display: Add polling method to handle MST reply packet")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DMUB may hang when powering down pixel clocks due to no dprefclk.
It is fixed by exiting idle optimization before the attempt to access PHY.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
It is not valid to set the WDIVIDER value to 0, so do not
re-write to DISPCLK_WDIVIDER if the current value is 0
(i.e., it is at it's initial value and we have not made any
requests to change DISPCLK yet).
Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current yellow carp B0 PHYD32CLK logic is incorrectly applied to other
ASICs.
[How]
Add guard to check chip family is yellow carp before applying logic.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expressions under 'else' branch in function 'dm_vblank_get_counter' &
'amdgpu_dm_backlight_get_level' are executed whenever the expression in
'if' is False. Otherwise, return from function occurs. Therefore, there is
no need in 'else', and it has been removed.
Fixes the following:
WARNING: else is not generally useful after a break or return
+ return 0;
+ else {
WARNING: else is not generally useful after a break or return
+ return convert_brightness_to_user(&caps, avg);
+ } else {
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This error path needs to unlock the "aconnector->handle_mst_msg_ready"
mutex before returning.
Fixes: bb4fa525f3 ("drm/amd/display: Add polling method to handle MST reply packet")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix underflow issue on 175hz timing
- Add interface to modify DMUB panel power options
- Remove check for default eDP panel_mode
- Add new sequence for 4-lane HBR3 on vendor specific retimers
- Update DPG test pattern programming
- Correct unit conversion for vstartup
- Exit idle optimizations before attempt to access PHY
- Refactor recout calculation with a more generic formula
- Read down-spread percentage from lut to adjust dprefclk.
- Don't apply FIFO resync W/A if rdivider = 0
- Prevent invalid pipe connections
- Rearrange dmub_cmd defs order
- Add VESA SCR case for default aux backlight
- Guard DCN31 PHYD32CLK logic against chip family
- Correct grammar mistakes
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Screen underflows happen on 175hz timing for 3 plane overlay case.
[How]
Based on dst y prefetch value clamp to equ or oto for bandwidth
calculation.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This option can vary depending on the panel and may be required to be
called during sink detection phase before transmitter control.
[How]
Allow modify the bit depending on the eDP panel connected with a new
interface.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Rearranged defs order
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPCD read is skipped first time after driver initialization.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In some vendor specific retimer setups for downstream 4-lane HBR3
configuration, the sink will show severe corruption (horizontal shifting)
and intermittent blanking.
[How]
Add new retimer programming sequence before clock recovery when 4 lanes
are active.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Last ODM slice could be slightly larger than other slice because it can be
including the residual.
[How]
Update DPG pattern programming sequence to use a different width for
last odm slice.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
vstartup is calculated to be a large number. It works because
it is within vertical blank, but it reduces region of blank that
can be used for power gating.
[How]
Calculation needs to convert micro seconds to number of
vertical lines.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DMUB may hang when powering down pixel clocks due to no dprefclk.
It is fixed by exiting idle optimization before the attempt to access PHY.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current recout calculation has a few assumptions and implementation
for MPO + ODM combine calculation is very specific. The equation has
too many cases without enough comments to document the detail.
[How]
The change remove the following assumptions:
1. When MPO is enabled, we only allow ODM Combine 2:1
2. ODM Combine always has even segment width.
3. Secondary MPO plane's pipe_ctx copies pre_odm_pipe from
its top pipe.
The change applies a generic formula with more details in comment to
document this solution so it is eaiser to learn and debug later.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Panels show corruption with high refresh rate timings when
ss is enabled.
[How]
Read down-spread percentage from lut to adjust dprefclk.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
It is not valid to set the WDIVIDER value to 0, so do not
re-write to DISPCLK_WDIVIDER if the current value is 0
(i.e., it is at it's initial value and we have not made any
requests to change DISPCLK yet).
Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Prevent ODM pipe connections between pipes that are not part
of the same plane when adding a plane to context
- Re-attach child pipes of ODM slice about to be disconnected
to prevent any lost pipes with invalid tops/bottoms
- We cannot split if head_pipe is not in ODM. Preventing this
avoids creating an invalid context with an invalid pipe.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Bitnun <ethan.bitnun@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How & Why]
When determining default aux backlight level, read from
DPCD address 0x734 for VESA SCR on OLED.
Reviewed-by: Felipe Clark <felipe.clark@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current yellow carp B0 PHYD32CLK logic is incorrectly applied to other
ASICs.
[How]
Add guard to check chip family is yellow carp before applying logic.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
