Driver Changes:
Fixes/improvements/new stuff:
- Fix workarounds on Gen2-3 (Tvrtko Ursulin)
- Fix HuC delayed load memory leaks (Daniele Ceraolo Spurio)
- Fix a BUG caused by impendance mismatch in dma_fence_wait_timeout and GuC (Janusz Krzysztofik)
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663 (Matt Atwood)
- Apply recommended L3 hashing mask tuning parameters (Gen12+) (Matt Roper)
- Improve suspend / resume times with VT-d scanout workaround active (Andi Shyti, Chris Wilson)
- Silence misleading "mailbox access failed" warning in snb_pcode_read (Ashutosh Dixit)
- Fix null pointer dereference on HSW perf/OA (Umesh Nerlige Ramappa)
- Avoid trampling the ring during buffer migration (and selftests) (Chris Wilson, Matthew Auld)
- Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state (Matthew Auld)
- More fixing of DG2 visual corruption by not forgetting to copy CCS aux state of backup objects (Matthew Auld)
- Fix TLB invalidation for Gen12.50 video and compute engines (Andrzej Hajda)
- Limit Wa_22012654132 to just specific steppings (Matt Roper)
- Fix userspace crashes due eviction not working under lock contention after the object locking conversion (Matthew Auld)
- Avoid double free is user deploys a corrupt GuC firmware (John Harrison)
- Fix 32-bit builds by using "%zu" to format size_t (Nirmoy Das)
- Fix a possible BUG in TTM async unbind due not reserving enough fence slots (Nirmoy Das)
- Fix potential use after free by not exposing the GEM context id to userspace too early (Rob Clark)
- Show clamped PL1 limit to the user (hwmon) (Ashutosh Dixit)
- Workaround unreliable reset on Jasperlake (Chris Wilson)
- Cover rest of SVG unit MCR registers (Gustavo Sousa)
- Avoid PXP log spam on platforms which do not support the feature (Alan Previn)
- Re-disable RC6p on Sandy Bridge to avoid GPU hangs and visual glitches (Sasa Dragic)
Future platform enablement:
- Manage uncore->lock while waiting on MCR register (Matt Roper)
- Enable Idle Messaging for GSC CS (Vinay Belgaumkar)
- Only initialize GSC in tile 0 (José Roberto de Souza)
- Media GT and Render GT share common GGTT (Aravind Iddamsetty)
- Add dedicated MCR lock (Matt Roper)
- Implement recommended caching policy (PVC) (Wayne Boyer)
- Add hardware-level lock for steering (Matt Roper)
- Check full IP version when applying hw steering semaphore (Matt Roper)
- Enable GuC GGTT invalidation from the start (Daniele Ceraolo Spurio)
- MTL GSC firmware support (Daniele Ceraolo Spurio, Jonathan Cavitt)
- MTL OA support (Umesh Nerlige Ramappa)
- MTL initial gt workarounds (Matt Roper)
Driver refactors:
- Hold forcewake and MCR lock over PPAT setup (Matt Roper)
- Acquire fw before loop in intel_uncore_read64_2x32 (Umesh Nerlige Ramappa)
- GuC filename cleanups and use submission API version number (John Harrison)
- Promote pxp subsystem to top-level of i915 (Alan Previn)
- Finish proofing the code agains object size overflows (Chris Wilson, Gwan-gyeong Mun)
- Start adding module oriented dmesg output (John Harrison)
Miscellaneous:
- Correct kerneldoc for intel_gt_mcr_wait_for_reg() (Matt Roper)
- Bump up sample period for busy stats selftest (Umesh Nerlige Ramappa)
- Make GuC default_lists const data (Jani Nikula)
- Fix table order verification to check all FW types (John Harrison)
- Remove some limited use register access wrappers (Jani Nikula)
- Remove struct_member macro (Andrzej Hajda)
- Remove hardcoded value with a macro (Nirmoy Das)
- Use helper func to find out map type (Nirmoy Das)
- Fix a static analysis warning (John Harrison)
- Consolidate VMA active tracking helpers (Andrzej Hajda)
- Do not cover all future platforms in TLB invalidation (Tvrtko Ursulin)
- Replace zero-length arrays with flexible-array members (Gustavo A. R. Silva)
- Unwind hugepages to drop wakeref on error (Chris Wilson)
- Remove a couple of superfluous i915_drm.h includes (Jani Nikula)
Merges:
- Merge drm/drm-next into drm-intel-gt-next (Rodrigo Vivi)
danvet: Fix up merge conflict in intel_uc_fw.c, we ended up with 2
copies of try_firmware_load() somehow.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8fW2Ny1B1hZ5ZmF@tursulin-desk
Always allow switching away via vga-switcheroo if the display is
uninitalized. Instead prevent switching to i915 if the device has
not been initialized.
This issue was introduced by commit 5df7bd1308 ("drm/i915: skip
display initialization when there is no display") protected, which
protects code paths from being executed on uninitialized devices.
In the case of vga-switcheroo, we want to allow a switch away from
i915's device. So run vga_switcheroo_process_delayed_switch() and
test in the switcheroo callbacks if the i915 device is available.
Fixes: 5df7bd1308 ("drm/i915: skip display initialization when there is no display")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: "Jouni Högander" <jouni.hogander@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20230116115425.13484-2-tzimmermann@suse.de
Add a new sub-directory for things that aren't specifically about the
GPU and don't really belong in the i915 driver top level, but also don't
belong under any of the existing sub-directories either.
Name it "soc", and move the PCH and DRAM code there.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221208142347.602726-1-jani.nikula@intel.com
Starting with MTL, there will be two GT-tiles, a render and media
tile. PXP as a service for supporting workloads with protected
contexts and protected buffers can be subscribed by process
workloads on any tile. However, depending on the platform,
only one of the tiles is used for control events pertaining to PXP
operation (such as creating the arbitration session and session
tear-down).
PXP as a global feature is accessible via batch buffer instructions
on any engine/tile and the coherency across tiles is handled implicitly
by the HW. In fact, for the foreseeable future, we are expecting this
single-control-tile for the PXP subsystem.
In MTL, it's the standalone media tile (not the root tile) because
it contains the VDBOX and KCR engine (among the assets PXP relies on
for those events).
Looking at the current code design, each tile is represented by the
intel_gt structure while the intel_pxp structure currently hangs off the
intel_gt structure.
Keeping the intel_pxp structure within the intel_gt structure makes some
internal functionalities more straight forward but adds code complexity to
code readability and maintainibility to many external-to-pxp subsystems
which may need to pick the correct intel_gt structure. An example of this
would be the intel_pxp_is_active or intel_pxp_is_enabled functionality
which should be viewed as a global level inquiry, not a per-gt inquiry.
That said, this series promotes the intel_pxp structure into the
drm_i915_private structure making it a top-level subsystem and the PXP
subsystem will select the control gt internally and keep a pointer to
it for internal reference.
This promotion comes with two noteworthy changes:
1. Exported pxp functions that are called by external subsystems
(such as intel_pxp_enabled/active) will have to check implicitly
if i915->pxp is valid as that structure will not be allocated
for HW that doesn't support PXP.
2. Since GT is now considered a soft-dependency of PXP we are
ensuring that GT init happens before PXP init and vice versa
for fini. This causes a minor ordering change whereby we previously
called intel_pxp_suspend after intel_uc_suspend but now is before
i915_gem_suspend_late but the change is required for correct
dependency flows. Additionally, this re-order change doesn't
have any impact because at that point in either case, the top level
entry to i915 won't observe any PXP events (since the GPU was
quiesced during suspend_prepare). Also, any PXP event doesn't
really matter when we disable the PXP HW (global GT irqs are
already off anyway, so even if there was a bug that generated
spurious events we wouldn't see it and we would just clean it
up on resume which is okay since the default fallback action
for PXP would be to keep the sessions off at this suspend stage).
Changes from prior revs:
v11: - Reformat a comment (Tvrtko).
v10: - Change the code flow for intel_pxp_init to make it more
cleaner and readible with better comments explaining the
difference between full-PXP-feature vs the partial-teelink
inits depending on the platform. Additionally, only do
the pxp allocation when we are certain the subsystem is
needed. (Tvrtko).
v9: - Cosmetic cleanups in supported/enabled/active. (Daniele).
- Add comments for intel_pxp_init and pxp_get_ctrl_gt that
explain the functional flow for when PXP is not supported
but the backend-assets are needed for HuC authentication
(Daniele and Tvrtko).
- Fix two remaining functions that are accessible outside
PXP that need to be checking pxp ptrs before using them:
intel_pxp_irq_handler and intel_pxp_huc_load_and_auth
(Tvrtko and Daniele).
- User helper macro in pxp-debugfs (Tvrtko).
v8: - Remove pxp_to_gt macro (Daniele).
- Fix a bug in pxp_get_ctrl_gt for the case of MTL and we don't
support GSC-FW on it. (Daniele).
- Leave i915->pxp as NULL if we dont support PXP and in line
with that, do additional validity check on i915->pxp for
intel_pxp_is_supported/enabled/active (Daniele).
- Remove unncessary include header from intel_gt_debugfs.c
and check drm_minor i915->drm.primary (Daniele).
- Other cosmetics / minor issues / more comments on suspend
flow order change (Daniele).
v7: - Drop i915_dev_to_pxp and in intel_pxp_init use 'i915->pxp'
through out instead of local variable newpxp. (Rodrigo)
- In the case intel_pxp_fini is called during driver unload but
after i915 loading failed without pxp being allocated, check
i915->pxp before referencing it. (Alan)
v6: - Remove HAS_PXP macro and replace it with intel_pxp_is_supported
because : [1] introduction of 'ctrl_gt' means we correct this
for MTL's upcoming series now. [2] Also, this has little impact
globally as its only used by PXP-internal callers at the moment.
- Change intel_pxp_init/fini to take in i915 as its input to avoid
ptr-to-ptr in init/fini calls.(Jani).
- Remove the backpointer from pxp->i915 since we can use
pxp->ctrl_gt->i915 if we need it. (Rodrigo).
v5: - Switch from series to single patch (Rodrigo).
- change function name from pxp_get_kcr_owner_gt to
pxp_get_ctrl_gt.
- Fix CI BAT failure by removing redundant call to intel_pxp_fini
from driver-remove.
- NOTE: remaining open still persists on using ptr-to-ptr
and back-ptr.
v4: - Instead of maintaining intel_pxp as an intel_gt structure member
and creating a number of convoluted helpers that takes in i915 as
input and redirects to the correct intel_gt or takes any intel_gt
and internally replaces with the correct intel_gt, promote it to
be a top-level i915 structure.
v3: - Rename gt level helper functions to "intel_pxp_is_enabled/
supported/ active_on_gt" (Daniele)
- Upgrade _gt_supports_pxp to replace what was intel_gtpxp_is
supported as the new intel_pxp_is_supported_on_gt to check for
PXP feature support vs the tee support for huc authentication.
Fix pxp-debugfs-registration to use only the former to decide
support. (Daniele)
- Couple minor optimizations.
v2: - Avoid introduction of new device info or gt variables and use
existing checks / macros to differentiate the correct GT->PXP
control ownership (Daniele Ceraolo Spurio)
- Don't reuse the updated global-checkers for per-GT callers (such
as other files within PXP) to avoid unnecessary GT-reparsing,
expose a replacement helper like the prior ones. (Daniele).
v1: - Add one more patch to the series for the intel_pxp suspend/resume
for similar refactoring
References: https://patchwork.freedesktop.org/patch/msgid/20221202011407.4068371-1-alan.previn.teres.alexis@intel.com
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221208180542.998148-1-alan.previn.teres.alexis@intel.com
This reverts commit 2ef6efa79f.
Checking the presence if the IRST (Intel Rapid Start Technology)
through the ACPI to decide whether to rebuild or not the GGTT
puts us at the mercy of the boot firmware and we need to
unnecessarily rely on third parties.
Because now we avoid adding scratch pages to the entire GGTT we
don't need this hack anymore.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221130235805.221010-6-andi.shyti@linux.intel.com
On XE_LPM+ platforms the media engines are carved out into a separate
GT but have a common GGTMMADR address range which essentially makes
the GGTT address space to be shared between media and render GT. As a
result any updates in GGTT shall invalidate TLB of GTs sharing it and
similarly any operation on GGTT requiring an action on a GT will have to
involve all GTs sharing it. setup_private_pat was being done on a per
GGTT based as that doesn't touch any GGTT structures moved it to per GT
based.
BSPEC: 63834
v2:
1. Add details to commit msg
2. includes fix for failure to add item to ggtt->gt_list, as suggested
by Lucas
3. as ggtt_flush() is used only for ggtt drop i915_is_ggtt check within
it.
4. setup_private_pat moved out of intel_gt_tiles_init
v3:
1. Move out for_each_gt from i915_driver.c (Jani Nikula)
v4: drop using RCU primitives on ggtt->gt_list as it is not an RCU list
(Matt Roper)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122070126.4813-1-aravind.iddamsetty@intel.com
With MTL standalone media architecture the wopcm layout has changed,
with separate partitioning in WOPCM for the root GT GuC and the media
GT GuC. The size of WOPCM is 4MB with the lower 2MB reserved for the
media GT and the upper 2MB for the root GT.
Given that MTL has GuC deprivilege, the WOPCM registers are pre-locked
by the bios. Therefore, we can skip all the math for the partitioning
and just limit ourselves to sanity-checking the values.
v2: fix makefile file ordering (Jani)
v3: drop XELPM_SAMEDIA_WOPCM_SIZE, check huc instead of VDBOX (John)
v4: further clarify commit message, remove blank line (John)
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-5-daniele.ceraolospurio@intel.com
Driver Changes:
- Fix for #7306: [Arc A380] white flickering when using arc as a
secondary gpu (Matt A)
- Add Wa_18017747507 for DG2 (Wayne)
- Avoid spurious WARN on DG1 due to incorrect cache_dirty flag
(Niranjana, Matt A)
- Corrections to CS timestamp support for Gen5 and earlier (Ville)
- Fix a build error used with clang compiler on hwmon (GG)
- Improvements to LMEM handling with RPM (Anshuman, Matt A)
- Cleanups in dmabuf code (Mike)
- Selftest improvements (Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2N11wu175p6qeEN@jlahtine-mobl.ger.corp.intel.com
- More VBT specific code clean-up, doc, organization,
and improvements (Ville)
- More MTL enabling work (Matt, RK, Anusha, Jose)
- FBC related clean-ups and improvements (Ville)
- Removing unused sw_fence_await_reservation (Niranjana)
- Big chunch of display house clean-up (Ville)
- Many Watermark fixes and clean-ups (Ville)
- Fix device info for devices without display (Jani)
- Fix TC port PLLs after readout (Ville)
- DPLL ID clean-ups (Ville)
- Prep work for finishing (de)gamma readout (Ville)
- PSR fixes and improvements (Jouni, Jose)
- Reject excessive dotclocks early (Ville)
- DRRS related improvements (Ville)
- Simplify uncore register updates (Andrzej)
- Fix simulated GPU reset wrt. encoder HW readout (Imre)
- Add a ADL-P workaround (Jose)
- Fix clear mask in GEN7_MISCCPCTL update (Andrzej)
- Temporarily disable runtime_pm for discrete (Anshuman)
- Improve fbdev debugs (Nirmoy)
- Fix DP FRL link training status (Ankit)
- Other small display fixes (Ankit, Suraj)
- Allow panel fixed modes to have differing sync
polarities (Ville)
- Clean up crtc state flag checks (Ville)
- Fix race conditions during DKL PHY accesses (Imre)
- Prep-work for cdclock squash and crawl modes (Anusha)
- ELD precompute and readout (Ville)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmNcHTsACgkQ+mJfZA7r
E8pXrwgAgYH8DQu+/C+gu4cB7wOQC+flrCAinCRaxE88q7iWDoQoY+XFdBLq9vEM
QWNAmnUG53+z1rW1+EAVoIDhRz7yYnsxScLj/FijJl52hNNP3QkZP4iZuAMJyQy2
NYDOQyzvLBGmOIDgz+4YBtqk28eiX8x0+sYSA/JuLU5lL1zXFeXt2pFt2kcAnT/S
Fe1MajA3TxLO9lAhnEzEUD3X/xLz5D/91BQS+7OL8n24Hxb9kBZ0N1UbwDOCDegc
NEGpQmJTJnkGTAEQ8tlqnvMgHUbGmm3OEImamfC2QGvIdolF8zax9baNKoUts7BZ
CaBDK2NK//W+sYl52Tig4pCv36bPdw==
=91XL
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2022-10-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Hotplug code clean-up and organization (Jani, Gustavo)
- More VBT specific code clean-up, doc, organization,
and improvements (Ville)
- More MTL enabling work (Matt, RK, Anusha, Jose)
- FBC related clean-ups and improvements (Ville)
- Removing unused sw_fence_await_reservation (Niranjana)
- Big chunch of display house clean-up (Ville)
- Many Watermark fixes and clean-ups (Ville)
- Fix device info for devices without display (Jani)
- Fix TC port PLLs after readout (Ville)
- DPLL ID clean-ups (Ville)
- Prep work for finishing (de)gamma readout (Ville)
- PSR fixes and improvements (Jouni, Jose)
- Reject excessive dotclocks early (Ville)
- DRRS related improvements (Ville)
- Simplify uncore register updates (Andrzej)
- Fix simulated GPU reset wrt. encoder HW readout (Imre)
- Add a ADL-P workaround (Jose)
- Fix clear mask in GEN7_MISCCPCTL update (Andrzej)
- Temporarily disable runtime_pm for discrete (Anshuman)
- Improve fbdev debugs (Nirmoy)
- Fix DP FRL link training status (Ankit)
- Other small display fixes (Ankit, Suraj)
- Allow panel fixed modes to have differing sync
polarities (Ville)
- Clean up crtc state flag checks (Ville)
- Fix race conditions during DKL PHY accesses (Imre)
- Prep-work for cdclock squash and crawl modes (Anusha)
- ELD precompute and readout (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y1wd6ZJ8LdJpCfZL@intel.com
Accessing the TypeC DKL PHY registers during modeset-commit,
-verification, DP link-retraining and AUX power well toggling is racy
due to these code paths being concurrent and the PHY register bank
selection register (HIP_INDEX_REG) being shared between PHY instances
(aka TC ports) and the bank selection being not atomic wrt. the actual
PHY register access.
Add the required locking around each PHY register bank selection->
register access sequence.
Kudos to Ville for noticing the race conditions.
v2:
- Add the DKL PHY register accessors to intel_dkl_phy.[ch]. (Jani)
- Make the DKL_REG_TC_PORT macro independent of PHY internals.
- Move initing the DKL PHY lock to a more logical place.
v3:
- Fix parameter reuse in the DKL_REG_TC_PORT definition.
- Document the usage of phy_lock.
v4:
- Fix adding TC_PORT_1 offset in the DKL_REG_TC_PORT definition.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025114457.2191004-1-imre.deak@intel.com
The i915 HWMON module will be used to expose voltage, power and energy
values for dGfx. Here we set up i915 hwmon infrastructure including i915
hwmon registration, basic data structures and functions.
v2:
- Create HWMON infra patch (Ashutosh)
- Fixed review comments (Jani)
- Remove "select HWMON" from i915/Kconfig (Jani)
v3: Use hwm_ prefix for static functions (Ashutosh)
v4: s/#ifdef CONFIG_HWMON/#if IS_REACHABLE(CONFIG_HWMON)/ since the former
doesn't work if hwmon is compiled as a module (Guenter)
v5: Fixed review comments (Jani)
v6: s/kzalloc/devm_kzalloc/ (Andi)
v7: s/hwmon_device_register_with_info/
devm_hwmon_device_register_with_info/ (Ashutosh)
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-2-ashutosh.dixit@intel.com
Currently we do the DRIVER_ATOMIC disable as almost the
first thing during pci probe. That involves the use of
DISPLAY_VER() which is perhaps a bit sketchy now that we
may need to read that out from the hardware itself.
Looks like we do populate a default value for it anyway
so the current does at least still work.
But let's make this safer anyway and move the code
into intel_device_info_runtime_init() where we also
handle the same thing for the !HAS_DISPLAY case.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007211108.3883-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Daniele needs 84d4333c1e ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Going forward, the hardware teams no longer consider new platforms to
have a "generation" in the way we've defined it for past platforms.
Instead, each IP block (graphics, media, display) will have their own
architecture major.minor versions and stepping ID's which should be read
directly from a register in the MMIO space.
Bspec: 63361, 64111
v2:
- Move the IP version readout to intel_device_info.c
- Convert the macro into a function
v3:
- Move subplatform init to runtime early init
- Cache runtime ver, release info to compare with hardware values.
- Use IP_VER for snaity check(MattR)
v4:
- Minor doccumentation changes.
- Normalize HAS_GMD_ID macro value.(JaniN)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916014648.1310346-2-radhakrishna.sripada@intel.com
drm/i915 feature pull #2 for v6.1:
Features and functionality:
- More Meteorlake platform enabling (Radhakrishna, Imre, Madhumitha)
- Allow seamless M/N changes on eDP panels that support it (Ville)
- Switch DSC debugfs from output bpp to input bpc (Swati)
Refactoring and cleanups:
- Clocking and DPLL refactoring and cleanups to support seamless M/N (Ville)
- Plenty of VBT definition and parsing updates and cleanups (Ville)
- Extract SKL watermark code to a separate file, and clean up (Ville)
- Clean up IPC interfaces and debugfs (Jani)
- Continue moving display data under drm_i915_private display sub-struct (Jani)
- Display quirk handling refactoring and abstractions (Jani)
- Stop using implicit dev_priv in gmbus registers (Jani)
- BUG_ON() removals and conversions to drm_WARN_ON() and BUILD_BUG_ON() (Jani)
- Use drm_dp_phy_name() for logging (Jani)
- Use REG_BIT() macros for CDCLK registers (Stan)
- Move display and media IP versions to runtime info (Radhakrishna)
Fixes:
- Fix DP MST suspend to avoid use-after-free (Andrzej)
- Fix HPD suspend to avoid use-after-free for fbdev (Andrzej)
- Fix various PSR issues regarding selective update and damage clips (Jouni)
- Fix runtime pm wakerefs for driver remove and release (Mitul Golani)
- Fix conditions for filtering fixed modes for panels (Ville)
- Fix TV encoder clock computation (Ville)
- Fix dvo mode_valid hook return type (Nathan Huckleberry)
Merges:
- Backmerge drm-next to sync the DP MST atomic changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87o7vfr064.fsf@intel.com
This, along with the changes already landed in commit 1c66a12ab4
("drm/i915: Handle each GT on init/release and suspend/resume") makes
engines from all GTs actually known to the driver.
To accomplish this we need to sprinkle a lot of for_each_gt calls around
but is otherwise pretty un-eventuful.
v2:
- Consolidate adjacent GT loops in a couple places. (Daniele)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220915232654.3283095-5-matthew.d.roper@intel.com
When we hook up interrupts (in the next patch), interrupts for the media
GT are still processed as part of the primary GT's interrupt flow. As
such, we should share the same IRQ lock with the primary GT. Let's
convert gt->irq_lock into a pointer and just point the media GT's
instance at the same lock the primary GT is using.
v2:
- Point media's gt->irq_lock at the primary GT lock properly. (Daniele)
- Fix jump target for intel_root_gt_init_early errors. (Daniele)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-14-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In preparation for enabling a second GT, there are a number of GT/uncore
operations that happen during initialization or suspend flows that need
to be performed on each GT, not just the primary,
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-10-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In a multi-GT system we need to initialize MMIO access for each GT, not
just the primary GT.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-9-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
As we start supporting multiple uncore structures in future patches, the
MMIO cleanup (which may also get called mid-init if there's a failure)
will become more complicated. Moving to DRM-managed actions will help
keep things simple.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-8-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The original intent of intel_uncore_mmio_debug as described in commit
0a9b26306d ("drm/i915: split out uncore_mmio_debug") was to be a
singleton structure that could be shared between multiple GTs' uncore
objects in a multi-tile system. Somehow we went off track and
started allocating separate instances of this structure for each GT,
which defeats that original goal.
But in reality, there isn't even a need to share the mmio_debug between
multiple GTs; on all modern platforms (i.e., everything after gen7)
unclaimed register accesses are something that can only be detected for
display registers. There's no point in grabbing the debug spinlock and
checking for unclaimed accesses on an uncore used by an xehpsdv or pvc
remote tile GT, or the uncore used by a mtl standalone media GT since
all of the display accesses go through the primary intel_uncore.
The simplest solution is to simply leave uncore->debug NULL on all
intel_uncore instances except for the primary one. This will allow us
to avoid the pointless debug spinlock acquisition we've been doing on
MMIO accesses coming in through these intel_uncores.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-3-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Pull all the skl+ watermark code (and the dbuf/sagv/ipc code
since it's all sort of intertwined and I'm too lazy to think
of a finer grained split right now) into its own file from the
catch-all intel_pm.c.
Also sneak in the s/dev_priv/i915/ rename while at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908191646.20239-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
While executing i915_selftest, wakeref imbalance warning is seen
with i915_selftest failure.
Currently when Driver is suspended, while doing unregister
it is taking wakeref without resuming the device.
This patch is resuming the device, if driver is already suspended
and doing unregister process.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830085158.577157-1-mitulkumar.ajitkumar.golani@intel.com
Move display watermark related members under drm_i915_private display
sub-struct.
It's a bit arbitrary when to define a named struct for grouping, but
clearly intel_wm is big enough to warrant a separate definition.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b991dd25f8f539746c475d417691e0816ff6b24a.1661346845.git.jani.nikula@intel.com
Add initial runtime info that we can copy to runtime info at i915
creation time. This lets us define the initial values for runtime info
statically while making it possible to change them runtime. This will be
the new home for the current "const" device info members that are
modified runtime anyway.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Maarten Lankhort <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a77c6db2da20d401f47a0a5e87356b9b3f6292df.1660910433.git.jani.nikula@intel.com
Display is turned off by i915_drm_suspend() during the suspend
procedure, removing the last reference of some gem objects that were
used by display.
The issue is that those objects are only actually freed when
mm.free_work executed and that can happen very late in the suspend
process causing issues.
So here draining all freed objects released by display fixing suspend
issues.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629134721.48375-1-jose.souza@intel.com
We've just set up device info in i915_driver_create() so we can use
DISPLAY_VER() intead of looking at match_info directly.
Semantically we want to check the display version instead of the
graphics version, and for the earlier platforms they are always the
same.
v2: Use DISPLAY_VER() instead of GRAPHICS_VER() (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220628141005.226252-1-jani.nikula@intel.com
Currently i915 disables d3cold for i915 pci dev.
This blocks D3 for i915 gfx pci upstream bridge (VSP).
Let's disable d3cold at gfx root port to make sure that
i915 gfx VSP can transition to D3 to save some power.
We don't need to disable/enable d3cold in rpm, s2idle
suspend/resume handlers. Disabling/Enabling d3cold at
gfx root port in probe/remove phase is sufficient.
Fixes: 1a085e2341 ("drm/i915: Disable D3Cold in s2idle and runtime pm")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by:: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616122249.5007-1-anshuman.gupta@intel.com
When the last reference of a gem object is removed it is added to the
mm.free_list list and mm.free_work is queued to actually free the
object.
So gem objects that had their last reference removed by display during
drm_atomic_helper_shutdown() are added to mm.free_list what could
cause that mm.free_work is executed at the same time as
intel_runtime_pm_driver_release() causing raw-wakerefs warning.
So here only calling i915_gem_suspend() and by consequence
i915_gem_drain_freed_objects() only after display is down making
sure all display gem objecs are freed when
intel_runtime_pm_driver_release() is executed.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617190629.355356-1-jose.souza@intel.com
When DMAR / VT-d is enabled, the display engine uses overfetching,
presumably to deal with the increased latency. To avoid display engine
errors and DMAR faults, as a workaround the GGTT is populated with scatch
PTEs when VT-d is enabled. However starting with gen10, Write-combined
writing of scratch PTES is no longer possible and as a result, populating
the full GGTT with scratch PTEs like on resume becomes very slow as
uncached access is needed.
Therefore, on integrated GPUs utilize the fact that the PTEs are stored in
stolen memory which retain content across S3 suspend. Don't clear the PTEs
on suspend and resume. This improves on resume time with around 100 ms.
While 100+ms might appear like a short time it's 10% to 20% of total resume
time and important in some applications.
One notable exception is Intel Rapid Start Technology which may cause
stolen memory to be lost across what the OS percieves as S3 suspend.
If IRST is enabled or if we can't detect whether IRST is enabled, retain
the old workaround, clearing and re-instating PTEs.
As an additional measure, if we detect that the last ggtt pte was lost
during suspend, print a warning and re-populate the GGTT ptes
On discrete GPUs, the display engine scans out from LMEM which isn't
subject to DMAR, and presumably the workaround is therefore not needed,
but that needs to be verified and disabling the workaround for dGPU,
if possible, will be deferred to a follow-up patch.
v2:
- Rely on retained ptes to also speed up suspend and resume re-binding.
- Re-build GGTT ptes if Intel rst is enabled.
v3:
- Re-build GGTT ptes also if we can't detect whether Intel rst is enabled,
and if the guard page PTE and end of GGTT was lost.
v4:
- Fix some kerneldoc issues (Matthew Auld), rebase.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617152856.249295-1-thomas.hellstrom@linux.intel.com
Each gt contains an independent instance of pcode. Extend pcode functions
to interface with pcode on different gt's. To avoid creating dependency of
display functionality on intel_gt, pcode function interfaces are exposed in
terms of uncore rather than intel_gt. Callers have been converted to pass
in the appropritate (i915 or intel_gt) uncore to the pcode functions.
v2: Expose pcode functions in terms of uncore rather than gt (Jani/Rodrigo)
v3: Retain previous function names to eliminate needless #defines (Rodrigo)
v4: Move out i915_pcode_init() to a separate patch (Tvrtko)
Remove duplicated drm_err/drm_dbg from intel_pcode_init() (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-2-tvrtko.ursulin@linux.intel.com
[tursulin: fixup merge conflict]
RPM suspend/resume also supported on gfx platforms which doesn't have
kms support and even on platforms without any connected display panel.
There is no good reason to log rpm suspend/resume debug message with
drm_dbg_kms() therefore changing it to drm_dbg().
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511130455.22028-1-anshuman.gupta@intel.com
In order to get the GSC Support merged on drm-intel-gt-next
in a clean fashion we needed this ATS-M patch to avoid
conflict in i915_pci.c:
commit 412c942bdf ("drm/i915/ats-m: add ATS-M platform info")
--
Fixing a silent conflict on drivers/gpu/drm/i915/gt/intel_gt_gmch.c:
- if (!intel_vtd_active(i915))
+ if (!i915_vtd_active(i915))
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Instead of having an option to build the gvt code into the main i915
module, just move it into the kvmgt.ko module. This only requires
a new struct with three entries that the KVMGT modules needs to register
with the main i915 module, and a proper list of GVT-enabled devices
instead of global device pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-7-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
