From XGMAC Core 3.20 and later, each Flexible PPS has individual PPSEN bit
to select Fixed mode or Flexible mode. The PPSEN must be set, or it stays
in Fixed PPS mode by default.
XGMAC Core prior 3.20, only PPSEN0(bit 4) is writable. PPSEN{1,2,3} are
read-only reserved, and they are already in Flexible mode by default, our
new code always set PPSEN{1,2,3} do not make things worse ;-)
Fixes: 95eaf3cd0a ("net: stmmac: dwxgmac: Add Flexible PPS support")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Upon boot up, the driver will configure the MAC capabilities based on
the maximum number of tx and rx queues. When the user changes the
tx queues to single queue, the MAC should be capable of supporting Half
Duplex, but the driver does not update the MAC capabilities when it is
configured so.
Using the stmmac_reinit_queues() to check the number of tx queues
and set the MAC capabilities accordingly.
Fixes: 0366f7e06a ("net: stmmac: add ethtool support for get/set channels")
Cc: <stable@vger.kernel.org> # 5.17+
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Gan, Yi Fang <yi.fang.gan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8fce333170 ("net: stmmac: Rework coalesce timer and fix
multi-queue races") decreased the TX coalesce timer from 40ms to 1ms.
This caused some performance regression on some target (regression was
reported at least on ipq806x) in the order of 600mbps dropping from
gigabit handling to only 200mbps.
The problem was identified in the TX timer getting armed too much time.
While this was fixed and improved in another commit, performance can be
improved even further by increasing the timer delay a bit moving from
1ms to 5ms.
The value is a good balance between battery saving by prevending too
much interrupt to be generated and permitting good performance for
internet oriented devices.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move TX timer arm call after DMA interrupt is enabled again.
The TX timer arm function changed logic and now is skipped if a napi is
already scheduled. By moving the TX timer arm call after DMA is enabled,
we permit to correctly skip if a DMA interrupt has been fired and a napi
has been scheduled again.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is currently a problem with the TX timer getting armed multiple
unnecessary times causing big performance regression on some device that
suffer from heavy handling of hrtimer rearm.
The use of the TX timer is an old implementation that predates the napi
implementation and the interrupt enable/disable handling.
Due to stmmac being a very old code, the TX timer was never evaluated
again with this new implementation and was kept there causing
performance regression. The performance regression started to appear
with kernel version 4.19 with 8fce333170 ("net: stmmac: Rework coalesce
timer and fix multi-queue races") where the timer was reduced to 1ms
causing it to be armed 40 times more than before.
Decreasing the timer made the problem more present and caused the
regression in the other of 600-700mbps on some device (regression where
this was notice is ipq806x).
The problem is in the fact that handling the hrtimer on some target is
expensive and recent kernel made the timer armed much more times.
A solution that was proposed was reverting the hrtimer change and use
mod_timer but such solution would still hide the real problem in the
current implementation.
To fix the regression, apply some additional logic and skip arming the
timer when not needed.
Arm the timer ONLY if a napi is not already scheduled. Running the timer
is redundant since the same function (stmmac_tx_clean) will run in the
napi TX poll. Also try to cancel any timer if a napi is scheduled to
prevent redundant run of TX call.
With the following new logic the original performance are restored while
keeping using the hrtimer.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Even though the hardware theoretically supports up to 4 simultaneous
auxiliary snapshot capture channels, the stmmac driver does support only
a single channel to be active at a time.
Previously in case of a PTP_CLK_REQ_EXTTS request, previously active
auxiliary snapshot capture channels were silently dropped and the new
channel was activated.
Instead of silently changing the state for all consumers, log an error
and return -EBUSY if a channel is already in use in order to signal to
userspace to disable the currently active channel before enabling another one.
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is a preparation patch. The next patch will check if an external TS
is active and return with an error. So we have to move the change of the
plat->flags that tracks if external timestamping is enabled after that
check.
Prepare for this change and move the plat->flags change into the mutex
and the if (on).
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Do not store bitmask for enabling AUX_SNAPSHOT0. The previous commit
("net: stmmac: fix PPS capture input index") takes care of calculating
the proper bit mask from the request data's extts.index field, which is
0 if not explicitly specified otherwise.
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The stmmac supports up to 4 auxiliary snapshots that can be enabled by
setting the appropriate bits in the PTP_ACR bitfield.
Previously as of commit f4da56529d ("net: stmmac: Add support for
external trigger timestamping") instead of setting the bits, a fixed
value was written to this bitfield instead of passing the appropriate
bitmask.
Now the correct bit is set according to the ptp_clock_request.extts_index
passed as a parameter to stmmac_enable().
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simplify the netdev_dbg() call in stmmac_enable() in order to reduce code
duplication. No functional change.
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The datatype of rx_coalesce_usecs is u32, always larger or equal to zero.
Previous checking does not include value 0, this patch removes the
checking to handle the value 0. This change in behaviour making the
value of 0 cause an error is not a problem because 0 is out of
range of rx_coalesce_usecs.
Signed-off-by: Gan Yi Fang <yi.fang.gan@intel.com>
Link: https://lore.kernel.org/r/20231018030802.741923-1-yi.fang.gan@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is just a trivial fix for a typo in a comment, no functional
changes.
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, clock configuration is spread throughout the driver and
partially duplicated for the STM32MP1 and STM32 MCU variants. This makes
it difficult to keep track of which clocks need to be enabled or disabled
in various scenarios.
This patch adds symmetric stm32_dwmac_clk_enable/disable() functions
that handle all clock configuration, including quirks required while
suspending or resuming. syscfg_clk and clk_eth_ck are not present on
STM32 MCUs, but it is fine to try to configure them anyway since NULL
clocks are ignored.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that napi_schedule return a bool, we can drop napi_reschedule that
does the same exact function. The function comes from a very old commit
bfe13f54f5 ("ibm_emac: Convert to use napi_struct independent of struct
net_device") and the purpose is actually deprecated in favour of
different logic.
Convert every user of napi_reschedule to napi_schedule.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> # ath10k
Acked-by: Nick Child <nnac123@linux.ibm.com> # ibm
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for can/dev/rx-offload.c
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20231009133754.9834-3-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using netconsole netpoll_poll_dev could be called from interrupt
context, thus using disable_irq() would cause the following kernel
warning with CONFIG_DEBUG_ATOMIC_SLEEP enabled:
BUG: sleeping function called from invalid context at kernel/irq/manage.c:137
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 10, name: ksoftirqd/0
CPU: 0 PID: 10 Comm: ksoftirqd/0 Tainted: G W 5.15.42-00075-g816b502b2298-dirty #117
Hardware name: aml (r1) (DT)
Call trace:
dump_backtrace+0x0/0x270
show_stack+0x14/0x20
dump_stack_lvl+0x8c/0xac
dump_stack+0x18/0x30
___might_sleep+0x150/0x194
__might_sleep+0x64/0xbc
synchronize_irq+0x8c/0x150
disable_irq+0x2c/0x40
stmmac_poll_controller+0x140/0x1a0
netpoll_poll_dev+0x6c/0x220
netpoll_send_skb+0x308/0x390
netpoll_send_udp+0x418/0x760
write_msg+0x118/0x140 [netconsole]
console_unlock+0x404/0x500
vprintk_emit+0x118/0x250
dev_vprintk_emit+0x19c/0x1cc
dev_printk_emit+0x90/0xa8
__dev_printk+0x78/0x9c
_dev_warn+0xa4/0xbc
ath10k_warn+0xe8/0xf0 [ath10k_core]
ath10k_htt_txrx_compl_task+0x790/0x7fc [ath10k_core]
ath10k_pci_napi_poll+0x98/0x1f4 [ath10k_pci]
__napi_poll+0x58/0x1f4
net_rx_action+0x504/0x590
_stext+0x1b8/0x418
run_ksoftirqd+0x74/0xa4
smpboot_thread_fn+0x210/0x3c0
kthread+0x1fc/0x210
ret_from_fork+0x10/0x20
Since [0] .ndo_poll_controller is only needed if driver doesn't or
partially use NAPI. Because stmmac does so, stmmac_poll_controller
can be removed fixing the above warning.
[0] commit ac3d9dd034 ("netpoll: make ndo_poll_controller() optional")
Cc: <stable@vger.kernel.org> # 5.15.x
Fixes: 47dd7a540b ("net: add support for STMicroelectronics Ethernet controllers")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/1c156a6d8c9170bd6a17825f2277115525b4d50f.1696429960.git.repk@triplefau.lt
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The STM32MP1 keeps clk_rx enabled during suspend, and therefore the
driver does not enable the clock in stm32_dwmac_init() if the device was
suspended. The problem is that this same code runs on STM32 MCUs, which
do disable clk_rx during suspend, causing the clock to never be
re-enabled on resume.
This patch adds a variant flag to indicate that clk_rx remains enabled
during suspend, and uses this to decide whether to enable the clock in
stm32_dwmac_init() if the device was suspended.
This approach fixes this specific bug with limited opportunity for
unintended side-effects, but I have a follow up patch that will refactor
the clock configuration and hopefully make it less error prone.
Fixes: 6528e02cc9 ("net: ethernet: stmmac: add adaptation for stm32mp157c.")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230927175749.1419774-1-ben.wolsieffer@hefring.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit 133466c3bb ("net: stmmac: use per-queue 64 bit statistics
where necessary") caused one regression as found by Uwe, the backtrace
looks like:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc1-00449-g133466c3bbe1-dirty #21
Hardware name: STM32 (Device Tree Support)
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x60/0x90
dump_stack_lvl from register_lock_class+0x98c/0x99c
register_lock_class from __lock_acquire+0x74/0x293c
__lock_acquire from lock_acquire+0x134/0x398
lock_acquire from stmmac_get_stats64+0x2ac/0x2fc
stmmac_get_stats64 from dev_get_stats+0x44/0x130
dev_get_stats from rtnl_fill_stats+0x38/0x120
rtnl_fill_stats from rtnl_fill_ifinfo+0x834/0x17f4
rtnl_fill_ifinfo from rtmsg_ifinfo_build_skb+0xc0/0x144
rtmsg_ifinfo_build_skb from rtmsg_ifinfo+0x50/0x88
rtmsg_ifinfo from __dev_notify_flags+0xc0/0xec
__dev_notify_flags from dev_change_flags+0x50/0x5c
dev_change_flags from ip_auto_config+0x2f4/0x1260
ip_auto_config from do_one_initcall+0x70/0x35c
do_one_initcall from kernel_init_freeable+0x2ac/0x308
kernel_init_freeable from kernel_init+0x1c/0x138
kernel_init from ret_from_fork+0x14/0x2c
The reason is the rxq|txq_stats structures are not what expected
because stmmac_open() -> __stmmac_open() the structure is overwritten
by "memcpy(&priv->dma_conf, dma_conf, sizeof(*dma_conf));"
This causes the well initialized syncp member of rxq|txq_stats is
overwritten unexpectedly as pointed out by Johannes and Uwe.
Fix this issue by moving rxq|txq_stats back to stmmac_extra_stats. For
SMP cache friendly, we also mark stmmac_txq_stats and stmmac_rxq_stats
as ____cacheline_aligned_in_smp.
Fixes: 133466c3bb ("net: stmmac: use per-queue 64 bit statistics where necessary")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230917165328.3403-1-jszhang@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now there's no external users of these two functions, make them static
so that there aren't any new usages of stmmac_probe_config_dt().
To avoid forward declaration, move stmmac_remove_config_dt() location.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now, all users of the old stmmac_pltfr_remove() are converted to the
devres helper, it's time to rename stmmac_pltfr_remove_no_dt() back to
stmmac_pltfr_remove() and remove the old stmmac_pltfr_remove().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The calling of stmmac_pltfr_remove() now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The calling of stmmac_pltfr_remove() now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The calling of stmmac_pltfr_remove() now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The calling of stmmac_pltfr_remove() now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The calling of stmmac_pltfr_remove() now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The calling of stmmac_pltfr_remove() now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the devres variant of stmmac_pltfr_probe() and finally drop the
remove() hook.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add sw fallback of tx checksum calculation for those tx queues that
don't support tx checksum offloading. DW xGMAC IP can be synthesized
such that it can support tx checksum offloading only for a few
initial tx queues. Also as Serge pointed out, for the DW QoS IP, tx
coe can be individually configured for each tx queue.
So when tx coe is enabled, for any tx queue that doesn't support
tx coe with 'coe-unsupported' flag set will have a sw fallback
happen in the driver for tx checksum calculation when any packets to
be transmitted on these tx queues.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This glue driver is created based on the arch-code
implemented earlier with the platform-specific settings.
Use syscon for SYSCON register access.
And modify MAINTAINERS to add a new F: entry for this driver.
Partially based on the previous work by Serge Semin.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Setting ethtool -C eth0 tx-usecs 0 is supposed to disable the use of the
coalescing timer but currently it gets programmed with zero delay
instead.
Disable the use of the coalescing timer if tx-usecs is zero by
preventing it from being restarted. Note that to keep things simple we
don't start/stop the timer when the coalescing settings are changed, but
just let that happen on the next transmit or timer expiry.
Fixes: 8fce333170 ("net: stmmac: Rework coalesce timer and fix multi-queue races")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Stein reports that commit a014c35556 ("net: stmmac: clarify
difference between "interface" and "phy_interface"") caused breakage,
because plat->mac_interface will never be negative. Fix this by using
the "rc" temporary variable in stmmac_probe_config_dt().
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/E1qayn0-006Q8J-GE@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clarify the difference between "interface" and "phy_interface" in
struct plat_stmmacenet_data, both by adding a comment, and also
renaming "interface" to be "mac_interface". The difference between
these are:
MAC ----- optional PCS ----- SerDes ----- optional PHY ----- Media
^ ^
mac_interface phy_interface
Note that phylink currently only deals with phy_interface.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZq83-005tts-6K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>