It's possible to do btree updates before going RW by adding them to the
list of updates for journal replay to do, but this is limited by what
fits in RAM. This patch switches the second alloc info phase to run
after going RW - btree_gc has already ensured the alloc btree itself is
correct - and tweaks the allocation path to deal with the potential
small inconsistencies.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a debug mode where we split up the c->writes refcount into
distinct refcounts for every codepath that takes a reference, and adds
sysfs code to print the value of each ref.
This will make it easier to debug shutdown hangs due to refcount leaks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This separates out the slowpath into a separate function, and inlines
bch2_alloc_v4_mut into bch2_trans_start_alloc_update(), the main place
it's called.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This introduces some new conveniences, to help cut down on boilerplate:
- bch2_trans_kmalloc_nomemzero() - performance optimiation
- bch2_bkey_make_mut()
- bch2_bkey_get_mut()
- bch2_bkey_get_mut_typed()
- bch2_bkey_alloc()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We shouldn't be overloading standard error codes now that we have
provisions for bcachefs-specific errorcodes: this patch converts super.c
and super-io.c to per error site errcodes, with a bit of cleanup.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch introduces
- bpos_eq()
- bpos_lt()
- bpos_le()
- bpos_gt()
- bpos_ge()
and equivalent replacements for bkey_cmp().
Looking at the generated assembly these could probably be improved
further, but we already see a significant code size improvement with
this patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also, do some reorganizing/renaming, convert atomic counters in bch_fs
to persistent counters, and add a few missing counters.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that we have error codes, with subtypes, we can switch to our own
error code for transaction restarts - and even better, a distinct error
code for each transaction restart reason: clearer code and better
debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Instead of overloading standard error codes (EINTR/EAGAIN), and defining
short lists of error codes in multiple places that potentially end up
overlapping & conflicting, we're now going to have one master list of
error codes.
Error codes are defined with an x-macro: thus we also have
bch2_err_str() now.
Also, error codes have a class field. Now, instead of checking for
errors with ==, code should use bch2_err_matches(), which returns true
if the error is equal to or a sub-error of the error class.
This means we can define unique errors for every source location where
an error is generated, which will help improve our error messages.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The new for_each_btree_key2() macro handles transaction retries,
allowing us to avoid nested transactions - which we want to avoid since
they're tricky to do completely correctly and upcoming assertions are
going to be checking for that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
The new for_each_btree_key2() macro handles transaction retries,
allowing us to avoid nested transactions - which we want to avoid since
they're tricky to do completely correctly and upcoming assertions are
going to be checking for that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
The new for_each_btree_key2() macro handles transaction retries,
allowing us to avoid nested transactions - which we want to avoid since
they're tricky to do completely correctly and upcoming assertions are
going to be checking for that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
The new for_each_btree_key2() macro handles transaction retries,
allowing us to avoid nested transactions - which we want to avoid since
they're tricky to do completely correctly and upcoming assertions are
going to be checking for that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This introduces two new macros for iterating through the btree, with
transaction restart handling
- for_each_btree_key2()
- for_each_btree_key_commit()
Every iteration is now in an implicit transaction, and - as with
lockrestart_do() and commit_do() - returning -EINTR will cause the
transaction to be restarted, at the same key.
This patch converts a bunch of code that was open coding this to these
new macros, saving a substantial amount of code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Better/more descriptive naming, and prep for adding
nested_lockrestart_do() and nested_commit_do().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
There's no need to print fsck errors for errors that are expected, and
the user has already opted to repair.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
bch2_check_alloc_key() was failing to check buckets that didn't have
alloc keys yet (because they'd never been used) - they still need to be
added to the freespace btree.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- In check_alloc_key(), previously we were re-initializing iterators
for the need_discard and freespace btrees for every alloc key we
checked. But this was causing us to redo lookups into the journal
keys every time, since those lookups are cached in struct btree_iter.
This initializes the iterators in bch2_check_alloc_info and passes
them into check_alloc_key().
- Make the looping more consistent/efficient in bch2_check_alloc_info()
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This runs before we go rw for journal replay, but after we're allowed to
go rw. It might be time to consider killing BTREE_INSERT_LAZY_RW,
though.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- invalidate_one_bucket() now returns 1 when we don't have any buckets
on this device to invalidate, ensuring we don't spin
- the tracepoint invocation is moved to after the transaction commit,
and we now include the number of cached sectors in the tracepoint
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
If we fail to queue the work item because it's already in process, we
need to drop the ref we just took.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
If we're trying to get a ref and the refcount has been killed, it means
we're doing an emergency shutdown - we always want tryget_live().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Like the previous patch for bucket invalidates, add another counter for
a core allocator path.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
bch2_dev_freespace_init() was using __bch2_trans_do() incorrectly, and
calling bch2_bucket_do_index() with a stale alloc key.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This converts bcachefs to the modern printbuf interface/implementation,
synced with the version to be submitted upstream.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree updates before going RW are expensive if they're in random order,
since they use the list of keys for journal replay to insert, which is
just a gap buffer.
This patch improves the bucket invalidate path so that if
bch2_check_lrus() hasn't finished it only prints warnings instead of
doing an emergency shutdown, which means we can now set BCH_FS_MAY_GO_RW
before bch2_check_lrus().
Also, the filesystem state bits are reorganized a bit.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Delete some obsolete tracepoints, organize alloc tracepoints better,
make a few tracepoints more consistent.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
For backpointers, we'll need the full key location - that means btree_id
and btree level. This patch plumbs it through.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
When we detect a filesystem inconsistency, we should include the
relevent keys in the error message. This patch adds a parameter to pass
the key with the lru entry to bch2_lru_delete(), so that it can be
printed.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Error messages should always print out the full key when available -
this gives us a starting point when looking through the journal to debug
what went wrong.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
It's an error if a bucket is in state BCH_DATA_cached but not on the LRU
btree - i.e io_time[READ] == 0 - so, make sure it's set before adding
it.
Also, make some of the LRU code a bit clearer and more direct.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- We weren't clearing the LRU btree
- bch2_alloc_read() runs before bch2_check_alloc_key() deletes alloc
keys for devices/buckets that don't exists, so it needs to check for
that
- bch2_check_lrus() needs to check that buckets exists
- improve some error messages
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Previously, we were missing accounting for buckets in need_gc_gens and
need_discard states. This matters because buckets in those states need
other btree operations done before they can be used, so they can't be
conuted when checking current number of free buckets against the
allocation watermark.
Also, we weren't directly counting free buckets at all. Now, data type 0
== BCH_DATA_free, and free buckets are counted; this means we can get
rid of the separate (poorly defined) count of unavailable buckets.
This is a new on disk format version, with upgrade and fsck required for
the accounting changes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We've been seeing this error in fsck and we weren't able to track down
where it came from - but now that .key_invalid methods take a rw
argument, we can safely check for this.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds a new parameter to .key_invalid() methods for whether the key
is being read or written; the idea being that methods can do more
aggressive checks when a key is newly created and being written, when we
wouldn't want to delete the key because of those checks.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- Move checks for whether the device & bucket are valid from the
.key_invalid method to bch2_check_alloc_key(). This is because
.key_invalid() is called on keys that may no longer exist (post
journal replay), which is a problem when removing/resizing devices.
- We weren't checking the need_discard btree to ensure that every set
bucket has a corresponding alloc key. This refactors the code for
checking the freespace btree, so that it now checks both.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
All code using the in-memory bucket array, excluding GC, has now been
converted to use the alloc btree directly - so we can finally delete it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the old allocator code, preparing an existing empty bucket was part
of the same code path that invalidated buckets containing cached data.
In the new allocator code this is no longer the case: the main allocator
path finds empty buckets (via the new freespace btree), and can't
allocate buckets that contain cached data.
We now need a separate code path to invalidate buckets containing cached
data when we're low on empty buckets, which this patch implements. When
the number of free buckets decreases that triggers the new invalidate
path to run, which uses the LRU btree to pick cached data buckets to
invalidate until we're above our watermark.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the old allocator code, buckets would be discarded just prior to
being used - this made sense in bcache where we were discarding buckets
just after invalidating the cached data they contain, but in a
filesystem where we typically have more free space we want to be
discarding buckets when they become empty.
This patch implements the new behaviour - it checks the need_discard
btree for buckets awaiting discards, and then clears the appropriate
bit in the alloc btree, which moves the buckets to the freespace btree.
Additionally, discards are now enabled by default.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that we have new persistent data structures for the allocator, this
patch converts the allocator to use them.
Now, foreground bucket allocation uses the freespace btree to find
buckets to allocate, instead of popping buckets off the freelist.
The background allocator threads are no longer needed and are deleted,
as well as the allocator freelists. Now we only need background tasks
for invalidating buckets containing cached data (when we are low on
empty buckets), and for issuing discards.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds two new btrees for the upcoming allocator rewrite: an extents
btree of free buckets, and a btree for buckets awaiting discards.
We also add a new trigger for alloc keys to keep the new btrees up to
date, and a compatibility path to initialize them on existing
filesystems.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
