Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Energy Efficient Ethernet should always be negotiated with the link
peer. Don't include SUPPORTED_Autoneg in the results of get_eee() for
supported, advertised or lp_advertised, since it is
assumed. Additionally, ethtool(1) ignores the set bit, and no other
driver sets this.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the tables to make use of ETHTOOL link mode bits, rather than
the old u32 SUPPORTED speeds. Make use of the linkmode helps to set
bits and compare linkmodes. As a result, the _u32 members of keee are
no longer used, a step towards removing them.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of the existing linkmode helpers for bit manipulation of EEE
advertise, support and link partner support. The aim is to drop the
restricted _u32 variants in the near future.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Updating link clock rate for different speeds is only needed when
using RGMII, as that mode requires changing clock speed when the link
speed changes. Let's restrict updating the link clock speed in
ethqos_update_link_clk() to just RGMII. Other modes such as SGMII
only need to enable the link clock (which is already done in probe).
Signed-off-by: Sarosh Hasan <quic_sarohasa@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Reviewed-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MMC IPC interrupt status and interrupt mask registers are
of little use as Ethernet statistics, but incrementing counters
based on the current interrupt and interrupt mask registers
makes them actively misleading.
For example, if the interrupt mask is set to 0x08420842,
the current code will increment by that amount each iteration,
leading to the following sequence of nonsense:
mmc_rx_ipc_intr_mask: 969816526
mmc_rx_ipc_intr_mask: 1108361744
These registers have been included in the Ethernet statistics
since the first version of MMC back in 2011 (commit 1c901a46d5).
That commit also mentions the MMC interrupts as
"something to add later (if actually useful)".
If the registers are actually useful, they should probably
be part of the Ethernet register dump instead of statistics,
but for now, drop the counters for mmc_rx_ipc_intr and
mmc_rx_ipc_intr_mask completely.
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223-stmmac_stats-v3-1-5d483c2a071a@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to do a clause 22 access to the PHY registers of the ADIN1110,
we have to write the MDIO frame to the ADIN1110_MDIOACC register, and
then poll the MDIO_TRDONE bit (for a 1) in the same register. The
device will set this bit to 1 once the internal MDIO transaction is
done. In practice, this bit takes ~50 - 60 us to be set.
The first attempt to poll the bit is right after the ADIN1110_MDIOACC
register is written, so it will always be read as 0. The next check will
only be done after 10 ms, which will result in the MDIO transactions
taking a long time to complete. Reduce this polling interval to 100 us.
Since this interval is short enough, switch the poll function to
readx_poll_timeout_atomic() instead.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240223162129.154114-1-ciprian.regus@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We want to be able to run rtnl_fill_ifinfo() under RCU protection
instead of RTNL in the future.
This patch prepares dev_get_iflink() and nla_put_iflink()
to run either with RTNL or RCU held.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Update the Kernel Doc for gelic_descr_set_tx_cmdstat()
and gelic_net_setup_netdev() so that documented name
and the actual name of the function match.
* Move define of GELIC_ALIGN() so that it is no longer
between gelic_alloc_card_net() and it's Kernel Doc.
* Document netdev parameter of gelic_alloc_card_net()
in a way consistent to the documentation of other netdev parameters
in this file.
Addresses the following warnings flagged by ./scripts/kernel-doc -none:
.../ps3_gelic_net.c:711: warning: expecting prototype for gelic_net_set_txdescr_cmdstat(). Prototype was for gelic_descr_set_tx_cmdstat() instead
.../ps3_gelic_net.c:1474: warning: expecting prototype for gelic_ether_setup_netdev(). Prototype was for gelic_net_setup_netdev() instead
.../ps3_gelic_net.c:1528: warning: expecting prototype for gelic_alloc_card_net(). Prototype was for GELIC_ALIGN() instead
.../ps3_gelic_net.c:1531: warning: Function parameter or struct member 'netdev' not described in 'gelic_alloc_card_net'
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Geoff Levand <geoff@infradead.org>
Link: https://lore.kernel.org/r/20240221-ps3-gelic-kdoc-v1-1-7629216d1340@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Serdes phy needs to operate at 2500 mode for 2.5G speed and 1000
mode for 1G/100M/10M speed.
Added changes to configure serdes phy and mac based on link speed.
Changing serdes phy speed involves multiple register writes for
serdes block. To avoid redundant write operations only update serdes
phy when new speed is different.
For 2500 speed MAC PCS autoneg needs to disabled. Added changes to
disable MAC PCS autoneg if ANE parameter is not set.
Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com>
Tested-by: Abhishek Chauhan <quic_abchauha@quicinc.com> # sa8775p-ride
Reviewed-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The newly created vnic (BNXT_VNIC_NTUPLE) is ready to be used to create
ntuple filters when supported by firmware. All RX rings can be used
regardless of the RSS indirection setting on the default VNIC.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allocate and setup the additional VNIC for ntuple filters if this
new method is supported by the firmware. Even though this VNIC is
only used for ntuple filters with direct ring destinations, we still
setup the RSS hash to be identical to the default VNIC so that each
RX packet will have the correct hash in the RX completion. This
VNIC is always at VNIC index BNXT_VNIC_NTUPLE.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On newer chips that support the ring table index method for
ntuple filters, the current scheme of using the same VNIC for
both RSS and ntuple filters will not work in all cases. An
ntuple filter can only be directed to a destination ring if
that destination ring is also in the RSS indirection table.
To support ntuple filters with any arbitratry RSS indirection
table that may only include a subset of the rings, we need to
use a separate VNIC for ntuple filters.
This patch provisions the additional VNIC. The next patch will
allocate additional VNIC from firmware and set it up.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace hard coded 0 index with more meaningful BNXT_VNIC_DEFAULT.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor bnxt_set_features() function to have a common
function to re-init. We'll need this to reinitialize when
ntuple configuration changes.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the code by adding a new function to calculate the number of
required VNICs. This is used in multiple places when reserving or
checking resources.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bnxt_check_rings() is called to check if we have enough resource
assets to satisfy the new number of ethtool channels. If the asset
test fails, the ethtool operation will fail gracefully. Otherwise
we will proceed and commit to use the new number of channels. If it
fails to allocate any resources, the chip will fail to come up.
For completeness, check all possible resources before committing to
the new settings. Add the missing ring group and RSS context asset
tests in bnxt_check_rings().
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add RSS context fields to struct bnxt_hw_rings and struct bnxt_hw_resc.
With these, we can now specific the exact number of RSS contexts to
reserve and store the reserved value. The original code relies on
other resources to infer the number of RSS contexts to reserve and the
reserved value is not stored. This improved infrastructure will make
the RSS context accounting more complete and is needed by later
patches.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current code assumes that every RX ring group and every TX ring
requires a completion ring on P5_PLUS chips. Now that we have the
bnxt_hw_rings structure, add the cp_p5 field so that it can
be explicitly specified. This makes the logic more clear.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current functions to reserve hardware rings pass in 6 different ring
or resource types as parameters. Add a structure bnxt_hw_rings to
consolidate all these parameters and pass the structure pointer instead
to these functions. Add 2 related helper functions also. This makes
the code cleaner and makes it easier to add new resources to be
reserved.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Both registers used when doing manual injection or fdma injection are
shared between all the net devices of the switch. It was noticed that
when having two process which each of them trying to inject frames on
different ethernet ports, that the HW started to behave strange, by
sending out more frames then expected. When doing fdma injection it is
required to set the frame in the DCB and then make sure that the next
pointer of the last DCB is invalid. But because there is no locks for
this, then easily this pointer between the DCB can be broken and then it
would create a loop of DCBs. And that means that the HW will
continuously transmit these frames in a loop. Until the SW will break
this loop.
Therefore to fix this issue, add a spin lock for when accessing the
registers for manual or fdma injection.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Fixes: f3cad2611a ("net: sparx5: add hostmode with phylink support")
Link: https://lore.kernel.org/r/20240219080043.1561014-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix EST offset for dwmac 5.10.
Currently configuring Qbv doesn't work as expected. The schedule is
configured, but never confirmed:
|[ 128.250219] imx-dwmac 428a0000.ethernet eth1: configured EST
The reason seems to be the refactoring of the EST code which set the wrong
EST offset for the dwmac 5.10. After fixing this it works as before:
|[ 106.359577] imx-dwmac 428a0000.ethernet eth1: configured EST
|[ 128.430715] imx-dwmac 428a0000.ethernet eth1: EST: SWOL has been switched
Tested on imx93.
Fixes: c3f3b97238 ("net: stmmac: Refactor EST implementation")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20240220-stmmac_est-v1-1-c41f9ae2e7b7@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 1b5ea7ffb7 ("net:
bcmgenet: Ensure MDIO unregistration has clocks enabled"). This is no
longer necessary now that the MDIO bus controller has a clock that it
can manage around the I/O accesses.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
GENET has historically had to create a MDIO platform device for its
controller and pass some auxiliary data to it, like a MDIO completion
callback. Now we also pass the "main" clock to allow for the MDIO bus
controller to manage that clock adequately around I/O accesses.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
AF reserves MCAM entries for each PF, VF present in the
system and populates the entry with DMAC and action with
default RSS so that basic packet I/O works. Since PF/VF is
not aware of the RSS action installed by AF, AF only fixup
the actions of the rules installed by PF/VF with corresponding
default RSS action. This worked well for rules installed by
PF/VF for features like RX VLAN offload and DMAC filters but
rules involving action like drop/forward to queue are also
getting modified by AF. Hence fix it by setting the default
RSS action only if requested by PF/VF.
Fixes: 967db3529e ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of ethtool_adv_to_mmd_eee_adv_t() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code overwrites fields in tp->eee with unchecked data from
edata, e.g. the bitmap with supported modes. ethtool properly returns
the received data from get_eee() call, but we have no guarantee that
other users of the ioctl set_eee() interface behave properly too.
Therefore copy only fields which are actually needed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
FORTIFY_SOURCE has been ignoring 0-sized destinations while the kernel
code base has been converted to flexible arrays. In order to enforce
the 0-sized destinations (e.g. with __counted_by), the remaining 0-sized
destinations need to be handled. Unfortunately, struct vic_provinfo
resists full conversion, as it contains a flexible array of flexible
arrays, which is only possible with the 0-sized fake flexible array.
Use unsafe_memcpy() to avoid future false positives under
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since there is a utility available for this, use
the API rather than open code.
Fixes: 13943d6c82 ("ionic: prevent pci disable of already disabled device")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We get the benefit of all the PCI reset locking and recovery if
we use the existing pci_reset_function() that will call our
local reset handlers.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the VF is hit with a reset, remove the aux device in
the prepare for reset and try to restore it after the reset.
The userland mechanics will need to recover and rebuild whatever
uses the device afterwards.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set up the pci_error_handlers error_detected and resume to be
useful in handling AER events.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-queue
Tony Nguyen says:
====================
i40e: Simplify VSI and VEB handling
Ivan Vecera says:
The series simplifies handling of VSIs and VEBs by introducing for-each
iterating macros, 'find' helper functions. Also removes the VEB
recursion because the VEBs cannot have sub-VEBs according datasheet and
fixes the support for floating VEBs.
The series content:
Patch 1 - Uses existing helper function for find FDIR VSI instead of loop
Patch 2 - Adds and uses macros to iterate VSI and VEB arrays
Patch 3 - Adds 2 helper functions to find VSIs and VEBs by their SEID
Patch 4 - Fixes broken support for floating VEBs
Patch 5 - Removes VEB recursion and simplifies VEB handling
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid the following warnings by removing the ena_select_queue() function
and rely on the net core to do the queue selection, The issue happen
when an skb received from an interface with more queues than ena is
forwarded to the ena interface.
[ 1176.159959] eth0 selects TX queue 11, but real number of TX queues is 8
[ 1176.863976] eth0 selects TX queue 14, but real number of TX queues is 8
[ 1180.767877] eth0 selects TX queue 14, but real number of TX queues is 8
[ 1188.703742] eth0 selects TX queue 14, but real number of TX queues is 8
Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sanity check for OOB write is off by one leading to a false positive
when the array is full.
Fixes: 9b90aca97f ("net: ethernet: bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid the PHY library call unnecessarily into the suspend/resume
functions by setting phydev->mac_managed_pm to true. The ASP driver
essentially does exactly what mdio_bus_phy_resume() does.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If 'dev' or 'data' is NULL, the 'priv' variable has an incorrect address
when dereferencing calling netdev_err().
Since we get as 'dev_id' or 'data' what was passed as the 'dev' argument
to request_irq() during interrupt initialization (that is, the net_device
and rx/tx queue pointers initialized at the time of the call) and since
there are usually no checks for the 'dev_id' argument in such handlers
in other drivers, remove these checks from the handlers in stmmac driver.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8532f613bc ("net: stmmac: introduce MSI Interrupt routines for mac, safety, RX & TX")
Signed-off-by: Pavel Sakharov <p.sakharov@ispras.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The VEB (virtual embedded switch) as a switch element can be
connected according datasheet though its uplink to:
- Physical port
- Port Virtualizer (not used directly by i40e driver but can
be present in MFP mode where the physical port is shared
between PFs)
- No uplink (aka floating VEB)
But VEB uplink cannot be connected to another VEB and any attempt
to do so results in:
"i40e 0000:02:00.0: couldn't add VEB, err -EIO aq_err I40E_AQ_RC_ENOENT"
that indicates "the uplink SEID does not point to valid element".
Remove this logic from the driver code this way:
1) For debugfs only allow to build floating VEB (uplink_seid == 0)
or main VEB (uplink_seid == mac_seid)
2) Do not recurse in i40e_veb_link_event() as no VEB cannot have
sub-VEBs
3) Ditto for i40e_veb_rebuild() + simplify the function as we know
that the VEB for rebuild can be only the main LAN VEB or some
of the floating VEBs
4) In i40e_rebuild() there is no need to check veb->uplink_seid
as the possible ones are 0 and MAC SEID
5) In i40e_vsi_release() do not take into account VEBs whose
uplink is another VEB as this is not possible
6) Remove veb_idx field from i40e_veb as a VEB cannot have
sub-VEBs
Tested using i40e debugfs interface:
1) Initial state
[root@cnb-03 net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 98.440641] i40e 0000:02:00.0: header: 3 reported 3 total
[ 98.446053] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 98.452593] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 98.458856] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
2) Add floating VEB
[root@cnb-03 net-next]# echo add relay > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 122.745630] i40e 0000:02:00.0: added relay 162
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 136.650049] i40e 0000:02:00.0: header: 4 reported 4 total
[ 136.655466] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 136.661994] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 136.668264] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
[ 136.674787] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
3) Add VMDQ2 VSI to this new VEB
[root@cnb-03 net-next]# dmesg -c
[ 168.351763] i40e 0000:02:00.0: added VSI 394 to relay 162
[ 168.374652] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 195.683204] i40e 0000:02:00.0: header: 5 reported 5 total
[ 195.688611] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 195.695143] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 195.701410] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 195.707935] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 195.714201] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
4) Try to delete the VEB
[root@cnb-03 net-next]# echo del relay 162 > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 239.260901] i40e 0000:02:00.0: deleting relay 162
[ 239.265621] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left
5) Do PF reset and check switch status after rebuild
[root@cnb-03 net-next]# echo pfr > $CMD
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
...
[ 272.333655] i40e 0000:02:00.0: header: 5 reported 5 total
[ 272.339066] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 272.345599] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 272.351862] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 272.358387] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 272.364654] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
6) Delete VSI and delete VEB
[ 297.199116] i40e 0000:02:00.0: deleting VSI 394
[ 299.807580] i40e 0000:02:00.0: deleting relay 162
[ 309.767905] i40e 0000:02:00.0: header: 3 reported 3 total
[ 309.773318] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 309.779845] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 309.786111] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Although the i40e supports so-called floating VEB (VEB without
an uplink connection to external network), this support is
broken. This functionality is currently unused (except debugfs)
but it will be used by subsequent series for switchdev mode
slow-path. Fix this by following:
1) Handle correctly floating VEB (VEB with uplink_seid == 0)
in i40e_reconstitute_veb() and look for owner VSI and
create it only for non-floating VEBs and also set bridge
mode only for such VEBs as the floating ones are using
always VEB mode.
2) Handle correctly floating VEB in i40e_veb_release() and
disallow its release when there are some VSIs. This is
different from regular VEB that have owner VSI that is
connected to VEB's uplink after VEB deletion by FW.
3) Fix i40e_add_veb() to handle 'vsi' that is NULL for floating
VEBs. For floating VEB use 0 for downlink SEID and 'true'
for 'default_port' parameters as per datasheet.
4) Fix 'add relay' command in i40e_dbg_command_write() to allow
to create floating VEB by 'add relay 0 0' or 'add relay'
Tested using debugfs:
1) Initial state
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 173.701286] i40e 0000:02:00.0: header: 3 reported 3 total
[ 173.706701] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 173.713241] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 173.719507] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
2) Add floating VEB
[root@host net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
[root@host net-next]# echo add relay > $CMD
[root@host net-next]# dmesg -c
[ 245.551720] i40e 0000:02:00.0: added relay 162
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 276.984371] i40e 0000:02:00.0: header: 4 reported 4 total
[ 276.989779] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 276.996302] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 277.002569] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
[ 277.009091] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
3) Add VMDQ2 VSI to this new VEB
[root@host net-next]# echo add vsi 162 > $CMD
[root@host net-next]# dmesg -c
[ 332.314030] i40e 0000:02:00.0: added VSI 394 to relay 162
[ 332.337486] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 387.284490] i40e 0000:02:00.0: header: 5 reported 5 total
[ 387.289904] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 387.296446] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 387.302708] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 387.309234] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 387.315500] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
4) Try to delete the VEB
[root@host net-next]# echo del relay 162 > $CMD
[root@host net-next]# dmesg -c
[ 428.749297] i40e 0000:02:00.0: deleting relay 162
[ 428.754011] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left
5) Do PF reset and check switch status after rebuild
[root@host net-next]# echo pfr > $CMD
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 738.056172] i40e 0000:02:00.0: header: 5 reported 5 total
[ 738.061577] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 738.068104] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 738.074367] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 738.080892] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 738.087160] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
6) Delete VSI and delete VEB
[root@host net-next]# echo del vsi 394 > $CMD
[root@host net-next]# echo del relay 162 > $CMD
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 1233.081126] i40e 0000:02:00.0: deleting VSI 394
[ 1239.345139] i40e 0000:02:00.0: deleting relay 162
[ 1244.886920] i40e 0000:02:00.0: header: 3 reported 3 total
[ 1244.892328] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 1244.898853] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 1244.905119] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add two helpers i40e_(veb|vsi)_get_by_seid() to find corresponding
VEB or VSI by their SEID value and use these helpers to replace
existing open-coded loops.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce i40e_for_each_vsi() and i40e_for_each_veb() helper
macros and use them to iterate relevant arrays.
Replace pattern:
for (i = 0; i < pf->num_alloc_vsi; i++)
by:
i40e_for_each_vsi(pf, i, vsi)
and pattern:
for (i = 0; i < I40E_MAX_VEB; i++)
by
i40e_for_each_veb(pf, i, veb)
These macros also check if array item pf->vsi[i] or pf->veb[i]
are not NULL and skip such items so we can remove redundant
checks from loop bodies.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use existing i40e_find_vsi_by_type() to find a VSI
associated with flow director.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
