Sending the LARI configuration may trigger calibration, which can have
undesired side effects. Move the command to be send earlier (before the
phy contexts are registered) to avoid unintended side effects.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.80742497eb3f.I3e599a796290082e6d331ea495a5591d55de4726@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We skipped this in the past, but now we will need it for some
platforms. Implement loading the PHY filter configuration IDs
from the WPFC ACPI table. Note that the firmware must also be
aware of the right filter configuration IDs (they're just the
IDs of a filter configuration, not the actual configuration).
Remove the useless hardcoded zeroes while at it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.035026ea3169.I3a1fc1fe644fefa0d818ee1926c5fc331d68e8a3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have this helper now instead of open-coding the check for
the dmi_tas_approved_list, so use it even here. It was added
for debugfs use, but it's better to be consistent.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.f3741f5cdef4.I5e0bf522189dc595ee38d05e93994211d32ec0f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Newest firmware don't advertise the version of ADD_STA because it has
been replaced by another command. There are old firmware images
that also don't advertise it. Replace all the checks with a new
inline, and in that check for either MLD API or the ADD_STA
command version.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.4b9305510223.I7cc143d87186f8441e9b8435cc550b76734c7eef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a number of upcoming things in both the stack and
drivers that would otherwise conflict, so merge wireless to
wireless-next to be able to avoid those conflicts.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there's no peer configured then there's no point in sending
the command down to the firmware with an invalid peer address.
Fixes: cf85123a21 ("wifi: iwlwifi: mvm: support enabling and disabling HW timestamping")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531194630.0fb9f81f1852.Idcc41b67d1fbb421e5ed9bac2177b948b7b4d1c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This new version of missed beacon notification uses link_id
instead of mac_id. Also add an option to use link id for
retrieving vif.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.17fe1cc632f1.Id1fabb532e2174712fe17d4ad86a2c8c64ae84da@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This feature depends on a platform bugfix. Until we have a
mechanism that can verify a platform has the required bugfix,
disable RFI.
Fixes: ef3ed33dfc ("wifi: iwlwifi: bump FW API to 77 for AX devices")
Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Link: https://lore.kernel.org/linux-wireless/CAAJw_ZvZdFpw9W2Hisc9c2BAFbYAnQuaFFaFG6N7qPUP2fOL_w@mail.gmail.com/
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The initiator smooth list is initialized only in iwl_mvm_up(), but is
cleared in iwl_mvm_mac_stop. This may result in iterating over the
list before it was initialized in case iwl_mvm_up() failed early.
Fix it by moving the list initialization to an earlier stage.
Fixes: b68bd2e314 ("iwlwifi: mvm: Add FTM initiator RTT smoothing logic")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.b50b1fe9a576.Ie348ffae110612d2e252ac120a3ba0aea063b1b6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add debug print for different FW program counter details of
different CPU. Program counter pc details will be read from
TLV during init.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.862790d336a9.I34e2ea05a79e8b2552f7f221bacf3af0166cb9c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PHY configuration command need to be sent to FW if the tx diversity
with SISO is supported.
This need to be sent to get the init notification from FW.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.c2121c8694a7.Ibee3dd8765ef4b7504660fa228a7c7eff78920af@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a fw_id_to_link_sta array in mvm to track the link
STA for each firmware station ID, and then use that to
report the link a frame was received on (since we know
the station ID from firmware).
Notably, this fixes beacon tracking for the correct link
since mac80211 now queues and processes those on the one
link identified by the link ID only.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.c7dd3ec18077.I12ef9eb4a5b8b5c2b9d6bcaa1fda73b59eba39d8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Driver uses link_id as an index in the array. FW currently can
support only 2 concurrently active links per vif with the ids in the
range 0-3. Add a mapping of dirver link ids to fw link id and track the
number of active link ids.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.a53e5df49c33.I02b25648d2d5ca370c0697bf19d0d34724eae8a1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of enabling HW timestamping by default every time a station
is connected, disable it by default and enable it only upon request
for a specific station. HW timestamping can be enabled for only one
peer at a time.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.62b98fbf545b.I450c1017ada7900a71a63d879bb542a08e3166c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support to enable/disable PHC clock. The PHC clock includes support
for fetching the cross timestamp i.e. a non-atomic snapshot of the current
time from the hardware (WiFi device) clock and system clock (wall-clock)
simultaneously.
Signed-off-by: Krishnanand Prabhu <krishnanand.prabhu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.ae1d64f513b9.Ib3b6ad61c9fa2fc5908f1e0d6f59f4af6eec1a77@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When doing the PLDR flow, the fw goes through a re-read and needs
PCI re-enumeration in order to recover. In this case, skip the mac
start retry and fw dumps as all the fw and registers are invalid
until the PCI re-enumeration.
In addition, print the register that shows the re-read counter
when loading the fw.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Link: https://lore.kernel.org/r/20221123225313.9ae77968961e.Ie06e886cef4b5921b65dacb7724db1276bed38cb@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
If the FW needs to do OTP re-read, the driver must notify CSME before
loading the FW so CSME will not try to access the NIC during the
re-read. Once the alive notification is received, CSME is notified
that NIC access is allowed again.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221102165239.49eb8c6d455f.I7f0a5debb2d3d662a4151199bbec24613f324c13@changeid
It is possible that CSME will try to take ownership while the driver
is stopping. In this case, if the CSME takes ownership message arrives
after the driver started unregistering, the iwl_mei_cache->ops is
already invalid, so the host will not answer with the ownership
confirmed message.
Similarly, if the take ownership message arrived after the mac was
stopped or when iwl_mvm_up() failed, setting rfkill will not trigger
sending the confirm message. As a result, CSME will not take
ownership, which will result in a disconnection.
Fix it by sending the ownership confirmed message immediately in such
cases.
Fixes: 2da4366f9e ("iwlwifi: mei: add the driver to allow cooperation with CSME")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221030191011.b2a4c009e3e6.I7f931b7ee8b168e8ac88b11f23bff98b7ed3cb19@changeid
When we're copying the PPAG table into the cmd structure we're failing
if the table doesn't exist in ACPI or is invalid, or if the FW doesn't
support PPAG setting etc.
This is wrong because those are valid scenarios. Fix this by not
failing in those cases.
Fixes: e8e10a37c5 ("iwlwifi: acpi: move ppag code from mvm to fw/acpi")
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220322173828.fa47f369b717.I6a9c65149c2c3c11337f3a802dff22f514a3a436@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* add BCM43454/6 support
rtw89
* add support for 160 MHz channels and 6 GHz band
* hardware scan support
iwlwifi
* support UHB TAS enablement via BIOS
* remove a bunch of W=1 warnings
* add support for channel switch offload
* support 32 Rx AMPDU sessions in newer devices
* add support for a couple of new devices
* add support for band disablement via BIOS
mt76
* mt7915 thermal management improvements
* SAR support for more mt76 drivers
* mt7986 wmac support on mt7915
ath11k
* debugfs interface to configure firmware debug log level
* debugfs interface to test Target Wake Time (TWT)
* provide 802.11ax High Efficiency (HE) data via radiotap
ath9k
* use hw_random API instead of directly dumping into random.c
wcn36xx
* fix wcn3660 to work on 5 GHz band
ath6kl
* add device ID for WLU5150-D81
cfg80211/mac80211
* initial EHT (from 802.11be) support
(EHT rates, 320 MHz, larger block-ack)
* support disconnect on HW restart
-----BEGIN PGP SIGNATURE-----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=ccps
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
brcmfmac
* add BCM43454/6 support
rtw89
* add support for 160 MHz channels and 6 GHz band
* hardware scan support
iwlwifi
* support UHB TAS enablement via BIOS
* remove a bunch of W=1 warnings
* add support for channel switch offload
* support 32 Rx AMPDU sessions in newer devices
* add support for a couple of new devices
* add support for band disablement via BIOS
mt76
* mt7915 thermal management improvements
* SAR support for more mt76 drivers
* mt7986 wmac support on mt7915
ath11k
* debugfs interface to configure firmware debug log level
* debugfs interface to test Target Wake Time (TWT)
* provide 802.11ax High Efficiency (HE) data via radiotap
ath9k
* use hw_random API instead of directly dumping into random.c
wcn36xx
* fix wcn3660 to work on 5 GHz band
ath6kl
* add device ID for WLU5150-D81
cfg80211/mac80211
* initial EHT (from 802.11be) support
(EHT rates, 320 MHz, larger block-ack)
* support disconnect on HW restart
* tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits)
mac80211: Add support to trigger sta disconnect on hardware restart
mac80211: fix potential double free on mesh join
mac80211: correct legacy rates check in ieee80211_calc_rx_airtime
nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation
mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible
mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
rtw89: 8852c: process logic efuse map
rtw89: 8852c: process efuse of phycap
rtw89: support DAV efuse reading operation
rtw89: 8852c: add chip::dle_mem
rtw89: add page_regs to handle v1 chips
rtw89: add chip_info::{h2c,c2h}_reg to support more chips
rtw89: add hci_func_en_addr to support variant generation
rtw89: add power_{on/off}_func
rtw89: read chip version depends on chip ID
rtw89: pci: use a struct to describe all registers address related to DMA channel
rtw89: pci: add V1 of PCI channel address
rtw89: pci: add struct rtw89_pci_info
rtw89: 8852c: add 8852c empty files
MAINTAINERS: add devicetree bindings entry for mt76
...
====================
Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Return -ENODEV instead of success on this error path.
Fixes: dd36a507c8 ("iwlwifi: mvm: look for the first supported channel when add/remove phy ctxt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210816183930.GA2068@kili
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The order of arguments for iwl_cmd_id() is confusing, and the
version is always 0 and thus a useless argument. Prefer the
WIDE_ID() macro (which needs to be a macro due to use in switch
cases etc.) over the iwl_cmd_id() function.
Obviously done with spatch:
@@
expression G, C;
@@
-iwl_cmd_id(C, G, 0)
+WIDE_ID(G, C)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.cc4f9d1a2e9b.Ieb023cd773ea22e819d1ef1c37ae857ecc1a839d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Read a new bit defined in ACPI WTAS that allows OEMs to specify whether
TAS is allowed in UHB (6-7GHz) in the USA. This can be used by OEMs
that got certified to use this feature.
Signed-off-by: Ayala Barazani <ayala.barazani@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.1d2ae1e6bcdb.I177929ed01ed7bf4614ea0f6db2af9e52de13316@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
SAR GEO offsets are not supported on 3160 devices. The code was
refactored and caused us to start sending the command anyway, which
causes a FW assertion failure. Fix that only considering this feature
supported on FW API with major version is 17 if the device is not
3160.
Additionally, fix the caller of iwl_mvm_sar_geo_init() so that it
checks for the return value, which it was ignoring.
Reported-by: Len Brown <lenb@kernel.org>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 78a19d5285 ("iwlwifi: mvm: Read the PPAG and SAR tables at INIT stage")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128144623.96f683a89b42.I14e2985bfd7ddd8a8d83eb1869b800c0e7f30db4@changeid
If OEM isn't in the allowed list, TAS should be disabled in US/CA.
Currently, if the OEM isn't allowed - we're sending the TAS only
if we are not in US or CA.
But this country check is done before we even know the country
(usually the configuration is ZZ in that stage).
So do the following instead:
1. Check if the current OEM is in the allowed list
2. If not - add US and CA to tas_block_list_array
3. Send the TAS table to FW.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
