Look at connector->colorimetry to determine output colorspace.
We don't want to impact current SDR behavior, so
DRM_MODE_COLORIMETRY_DEFAULT preserves current behavior.
Also add support to explicitly set BT601 and BT709.
v4:
- Roll support for BT709 and BT601 into this patch
- Add default case to avoid warnings for unhandled
enum values
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to signal mode_changed to make sure we update the output
colorspace.
v2: No need to call drm_hdmi_avi_infoframe_colorimetry as DC does its
own infoframe packing.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want compositors to be able to set the output
colorspace on DP and HDMI outputs, based on the
caps reported from the receiver via EDID.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need the connector_state for colorspace and scaling information
and can get it from connector->state.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following gcc with W=1:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'dc' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'update_type' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'planes_count' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'stream' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'stream_update' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'array_of_surface_update' not described in 'update_planes_and_stream_adapter'
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At drm suspend sequence, MST dc_sink is removed. When commit cached
MST stream back in drm resume sequence, the MST stream payload is not
properly created and added into the payload table. After resume, topology
change is reprobed by removing existing streams first. That leads to
no payload is found in the existing payload table as below error
"[drm] ERROR No payload for [MST PORT:] found in mst state"
1. In encoder .atomic_check routine, remove check existance of dc_sink
2. Bypass MST by checking existence of MST root port. dc_link_type cannot
differentiate MST port before topology is rediscovered.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During gpu-reset, we toggle vblank irq by calling dc_interrupt_set()
instead of amdgpu_irq_get/put() because we don't want to change the irq
source's refcount. However, we see the warning when vblank irq is enabled
by dc_interrupt_set() during gpu-reset but disabled by amdgpu_irq_put()
after gpu-reset.
[How]
Only in dm_gpureset_toggle_interrupts() we toggle vblank interrupts by
calling dc_interrupt_set(). Apart from this we call dm_set_vblank()
which uses amdgpu_irq_get/put() to operate vblank irq.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Change how DC version and hardware version is printed when driver is
loaded.
- Remove exclamation
- Add DC version and hardware version to both success and failure cases
- Add version in between appropriate filler words to make a complete
statement.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When freesync video mode is enabled, switching resolution from native
mode to one of the freesync video compatible modes can trigger continous
artifacts on some eDP panels when running under KDE. The articating can be seen in the
attached bug report.
[How]
Fix this by restricting updates that require full commit by using the same checks
for stream and scaling changes in the the enable pass of dm_update_crtc_state()
along with the check for compatible timings for freesync vide mode.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2162
Fixes: da5e149097 ("drm/amd/display: Fix hang when skipping modeset")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since, we are only interested in having
drm_edid_override_connector_update(), update the value of
connector->edid_blob_ptr. We don't care about the return value of
drm_edid_override_connector_update() here. So, drop count.
Fixes: 550e5d23f1 ("drm/amd/display: assign edid_blob_ptr with edid from debugfs")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some times people send their dmesg log for debugging, and one common
task is to check the modesetting line to catch which DCN/DCE we need to
debug. This commit introduces a simple conversion from the DCN/DCE
version to a string shown in the dmesg log.
Reviewed-by: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A global function without a header prototype has made it into
linux-next during the merge window:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6339:6: error: no previous prototype for 'amdgpu_dm_connector_funcs_force' [-Werror=missing-prototypes]
Mark the function static instead, as there are no other
callers outside this file.
Fixes: 0ba4a784a1 ("drm/amd/display: implement force function in amdgpu_dm_connector_funcs")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304251640.JClqTim9-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 80c6d6804f.
The orignal commit was intended as a workaround to prevent underflow and
flickering when using one normal monitor and the other high refresh rate
monitor (> 120Hz).
This patch is being reverted in favour of a software solution to enable
SubVP+DRR
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
We need to store CRTC information in secure_display_ctx, so postpone
the call to amdgpu_dm_crtc_secure_display_create_contexts() until we
initialize all CRTCs.
Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When userspace (IGT) inserts EDID with audio data (ELD), EDID
is not updated.
[How]
Implements force function (amdgpu_dm_connector_funcs_force) in
amdgpu_dm_connector_funcs to create emulated sink and to handle
EDID.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenchieh Chien <wenchieh.chien@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] implementation change of drm_edid_override_set since linux
kernel 6.1, edid from debugfs is saved into connector->edid_override
immediatey, not saved to connector->edid_blob_ptr at the same time.
[How] call new drm_edid function drm_connector_update_edid_property
to assign connector->edid_blob_ptr with override edid from debugfs.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, on a handful of ASICs. We allow the framebuffer for a given
plane to exist in either VRAM or GTT. However, if the plane's new
framebuffer is in a different memory domain than it's previous
framebuffer, flipping between them can cause the screen to flicker. So,
to fix this, don't perform an immediate flip in the aforementioned case.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Reviewed-by: Roman Li <Roman.Li@amd.com>
Fixes: 81d0bcf990 ("drm/amdgpu: make display pinning more flexible (v2)")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
We were not returning -EINVAL on DSC atomic check fail. Add it.
Fixes: 71be4b16d3 ("drm/amd/display: dsc validate fail not pass to atomic check")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] hdcp are enabled for asics from raven. for old asics
which hdcp are not enabled, hdcp_workqueue are null. some
access to hdcp work queue are not guarded with pointer check.
[How] add hdcp_workqueue pointer check before access workqueue.
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Consolidate dmub access to a single interface. This makes it easier to
add code in the future that needs to run every time a dmub command is
requested (e.g. instrumentation, locking etc).
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
when amdgpu_dm_update_connector_after_detect is called
two times successively with valid sink, memory allocated of
aconnector->timing_requested for the first call is not free.
this causes memeleak.
[How]
allocate memory only when aconnector->timing_requested
is null.
Reviewed-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
When skipping full modeset since the only state change was a front porch
change, the DC commit sequence requires extra checks to handle non
existant plane states being asked to be removed from context.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The adev->dm.dc pointer can be NULL and dereferenced in amdgpu_dm_fini()
without checking.
Add a NULL pointer check before calling dc_dmub_srv_destroy().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9a71c7d317 ("drm/amd/display: Register DMUB service with DC")
Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 075e2099c32c ("drm/amd/display: Fix race condition in DPIA AUX
transfer") was backported to stable, which I noticed because of git
saying
linux-6.1/.git/rebase-apply/patch:37154: space before tab in indent.
while applying patch-6.1.21. While fixing the code location that issued
that warning, improve in few more places.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The parent for the backlight device should be the drm-connector object,
not the PCI device.
Userspace relies on this to be able to detect which backlight class device
to use on hybrid gfx devices where there may be multiple native (raw)
backlight devices registered.
Specifically gnome-settings-daemon expects the parent device to have
an "enabled" sysfs attribute (as drm_connector devices do) and tests
that this returns "enabled" when read.
This aligns the parent of the backlight device with i915, nouveau, radeon.
Note that drivers/gpu/drm/amd/amdgpu/atombios_encoders.c also already
uses the drm_connector as parent, only amdgpu_dm.c used the PCI device
as parent before this change.
Changes in v3:
Make amdgpu_dm_register_backlight_device() check bl_idx != 1 before
registering the backlight since amdgpu_dm_connector_late_register()
now calls it for _all_ connectors.
Changes in v2:
Together with changing the parent, also move the registration to
drm_connector_funcs.late_register() this is necessary because the parent
device (which now is the drm_connector) must be registered before
the backlight class device is, otherwise the backlight class device ends
up without any parent set at all.
This brings the backlight class device registration timing inline with
nouveau and i915 which also use drm_connector_funcs.late_register()
for this.
Note this slightly changes backlight_device_register() error handling,
instead of not increasing dm->num_of_edps and re-using the current
bl_idx for a potential other backlight device, dm->backlight_dev[bl_idx]
is now simply left NULL on failure. This is ok because all code
looking at dm->backlight_dev[i] also checks it is not NULL.
Link: https://gitlab.gnome.org/GNOME/gnome-settings-daemon/-/issues/730
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make amdgpu_dm_register_backlight_device() take an amdgpu_dm_connector
pointer to the connector for which it should register the backlight
as its only argument.
This is a preparation patch for moving the actual backlight class device
registering to drm_connector_funcs.late_register.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename register_backlight_device() to setup_backlight_device()
and move all backlight setup related calls from
amdgpu_dm_register_backlight_device() and from
amdgpu_dm_initialize_drm_device() there.
This leaves amdgpu_dm_register_backlight_device() dealing purely
with registering the actual backlight class device.
This is a preparation patch for moving the actual backlight class device
registering to drm_connector_funcs.late_register.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently functions like update_connector_ext_caps() and
amdgpu_dm_connector_destroy() are iterating over dm->backlight_link[i]
to find the index of the (optional) backlight_dev associated with
the connector.
Instead make register_backlight_device() store the dm->backlight_dev[]
index used for the connector inside the amdgpu_dm_connector struct.
This removes the need to iterate over the dm->backlight_link[]
array and this is necessary as a preparation patch for moving
the actual backlight_device_register()
call to drm_connector_funcs.late_register.
While reworking update_connector_ext_caps() also remove the aconnector
and aconnector->dc_link NULL checks in this function. These are both
never NULL and are unconditionally derefed in its callers.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A kzalloc()+memcpy() can be optimized in a single kmemdup().
This saves a few cycles because some memory doesn't need to be zeroed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The commit c76e483cd9 ("drm/amd/display: Don't restrict bpc to 8 bpc")
removes the historical 8bpc dependency and sets max_bpc to 16.
[How]
The comment that states "8bpc for non-edp" needs to be removed as well.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Refactor register_backlight_device():
1) Turn the connector-type + signal check into an early exit
condition to avoid the indentation level of the rest of the code
2) Add an array bounds check for the arrays indexed by dm->num_of_edps
3) register_backlight_device() always increases dm->num_of_edps if
amdgpu_dm_register_backlight_device() has assigned a backlight_dev to
the current dm->backlight_link[dm->num_of_edps] slot.
So on its next call dm->backlight_dev[dm->num_of_edps] always point to
the next empty slot and the "if (!dm->backlight_dev[dm->num_of_edps])"
check will thus always succeed and can be removed.
4) Add a bl_idx local variable to use as array index, rather then
using dm->num_of_edps to improve the code readability.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
backlight_device_register() returns an ERR_PTR on error, but other code
such as amdgpu_dm_connector_destroy() assumes dm->backlight_dev[i] is NULL
if no backlight is registered.
Clear dm->backlight_dev[i] on registration failure, to avoid other code
trying to deref an ERR_PTR pointer.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The log "DMUB HPD callback" is crucial to identify when DP tunneling
is been established and driver is notified of this event from DMUB.
Same log is shared for long and short hotplug event and we need to
check trailing DC debug log to distinguish between them two, making
debugging on DPIA related issues a bit more troublesome.
[How]
Clearly states in dmesg logs whether this is a long or short hotplug
event.
Reviewed-by: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
All dc subcomponents should call another dc component via function pointers
stored in a component structure. This is part of dc coding convention since
the beginning. The reason behind this is to improve encapsulation and
polymorphism. The function contract is extracted into a single link service
structure defined in link.h header file and implemented only in link_factory.c instead
of spreading across multiple files in link component file structure.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently if invalid luminescence range is reported in edid,
then the driver doesn't have default range to fallback to.
[How]
Add default range if, the range is 0.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When FB_DAMAGE_CLIPS are provided in a non-MPO scenario, the loop does
not use the counter i. This causes the fill_dc_dity_rect() to always
fill dirty_rects[0], causing graphical artifacts when a damage clip
aware DRM client sends more than 1 damage clip.
Instead, use the flip_addrs->dirty_rect_count which is incremented by
fill_dc_dirty_rect() on a successful fill.
Fixes: 30ebe41582 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2453
Signed-off-by: Benjamin Cheng <ben@bcheng.me>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Swap is a function interface that provides exchange function. To avoid
code duplication, we can use swap function.
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:359:57-58: WARNING opportunity for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4448
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some amdgpu_dm_crtc.h functions didn't have names that indicated where
they were declared.
To better filter results in debug tools like ftrace, prefix these
functions with 'amdgpu_dm_crtc_'.
Signed-off-by: David Tadokoro <davidbtadokoro@usp.br>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fields blends_with_above and blends_with_below of struct
dc_plane_cap (defined in dc/dc.h) are boolean and set to true by
default. All instances of a dc_plane_cap maintain the default values of
both. Also, there is only one if statement that checks those fields and
there would be the same effect if it was deleted (assuming that those
fields are always going to be true).
For this reason, considering both fields as legacy ones, this commit
removes them and the aforementioned if statement.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: David Tadokoro <davidbtadokoro@usp.br>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu_dm_plane.h functions didn't have names that indicated where
they were declared.
To better filter results in debug tools like ftrace, prefix these
functions with 'amdgpu_dm_plane_'.
Note that we may want to make this same change in other files like
amdgpu_dm_crtc.h.
Signed-off-by: David Tadokoro <davidbtadokoro@usp.br>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function dc_update_planes_and_stream handles multiple cases where DC
needs to remove and add planes in the commit tail phase. After Linux
started to use this function, some of the IGT kms_plane started to fail;
one good example to illustrate why the new sequence regressed IGT is the
subtest plane-position-hole which has the following diagram as a
template:
+--------------------+ +-----------------------+
| +-----+ | | +-----+ |
| | | | | | +-----+ |
| | +--+ | ==> | | | | | |
| |__| | | +-|---+ | |
| | | +-----+ |
| | | |
+--------------------+ +-----------------------+
(a) Final image (b) Composed image
IGT expects image (a) as the final result of two plane compositions as
described in figure (b). After the migration to the new sequence, the
last plane order is changed, and DC generates the following image:
+---------------------+
| +-----+ |
| | | |
| | | |
| +-----+ |
| |
+---------------------+
Notice that the generated image by DC is different because the small
square that should be composed on top of the primary plane is below the
primary plane. For this reason, the CRC will mismatch with the expected
value. Since the function dc_add_all_planes_for_stream re-append all the
new planes back to the dc_validation_set, this commit ensures that the
original sequence is maintained. After this change, all CI tests in all
ASICs start to pass again.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Suggested-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
This commit is part of a sequence of changes that replaces the commit
sequence used in the DC with a new one. As a result of this transition,
we moved some specific parts from the commit sequence and brought them
to amdgpu_dm. This commit adds a wrapper inside DM that enable our
drivers to do any necessary preparation or change before we offload the
plane/stream update to DC.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The old dc_commit_updates_for_stream lacks manipulation for many corner
cases where the DC feature requires special attention; as a result, it
starts to show its limitation (e.g., the SubVP feature is not supported
by it, among other cases). To modernize and unify our internal API, this
commit replaces the old dc_commit_updates_for_stream with
dc_update_planes_and_stream, which has more features.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
There are two functions responsible for handling the DC commit state:
dc_commit_state and dc_commit_streams. Both have the same goal, but
dc_commit_streams surpess dc_commit_state in terms of completeness. For
this reason, maintaining these two functions makes maintainability
unnecessarily complicated. This commit replaces the old dc_commit_state
in favor of dc_commit_streams, and removes the old dc_commit_state.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DM is littered with DCN guards leading to frequent
breakages on non-DCN builds when new code is added.
[How]
Remove all guards that are not needed.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
There is no reason we still need a config option for this.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
eDP add new limitation for Y granularity for selected update feature.
DSC does not include this limitation while calculating slice height.
[HOW]
Add new limitation while looking for DSC slice height.
Reviewed-by: Cruise Hung <Cruise.Hung@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Mike Hsieh <Mike.Hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Remove the need to include dc_link.h separately. dc.h should contain
everything needed on DM side.
[How]
Merge dc_link.h into dc.h and dc_types.h so DM only needs to include
dc.h to use all link public functions.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Adding 1920x1080 as fail safe mode for
Video Format Fall Back Policy.
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jasdeep Dhillon <jdhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
