Intel CPUs have a MSR bit to limit CPUID enumeration to leaf two. If
this bit is set by the BIOS then CPUID evaluation including topology
enumeration does not work correctly as the evaluation code does not try
to analyze any leaf greater than two.
This went unnoticed before because the original topology code just
repeated evaluation several times and managed to overwrite the initial
limited information with the correct one later. The new evaluation code
does it once and therefore ends up with the limited and wrong
information.
Cure this by unlocking CPUID right before evaluating anything which
depends on the maximum CPUID leaf being greater than two instead of
rereading stuff after unlock.
Fixes: 22d63660c3 ("x86/cpu: Use common topology code for Intel")
Reported-by: Peter Schneider <pschneider1968@googlemail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/fd3f73dc-a86f-4bcf-9c60-43556a21eb42@googlemail.com
tl;dr: CPUs with CPUID.80000008H but without CPUID.01H:EDX[CLFSH]
will end up reporting cache_line_size()==0 and bad things happen.
Fill in a default on those to avoid the problem.
Long Story:
The kernel dies a horrible death if c->x86_cache_alignment (aka.
cache_line_size() is 0. Normally, this value is populated from
c->x86_clflush_size.
Right now the code is set up to get c->x86_clflush_size from two
places. First, modern CPUs get it from CPUID. Old CPUs that don't
have leaf 0x80000008 (or CPUID at all) just get some sane defaults
from the kernel in get_cpu_address_sizes().
The vast majority of CPUs that have leaf 0x80000008 also get
->x86_clflush_size from CPUID. But there are oddballs.
Intel Quark CPUs[1] and others[2] have leaf 0x80000008 but don't set
CPUID.01H:EDX[CLFSH], so they skip over filling in ->x86_clflush_size:
cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
if (cap0 & (1<<19))
c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
So they: land in get_cpu_address_sizes() and see that CPUID has level
0x80000008 and jump into the side of the if() that does not fill in
c->x86_clflush_size. That assigns a 0 to c->x86_cache_alignment, and
hilarity ensues in code like:
buffer = kzalloc(ALIGN(sizeof(*buffer), cache_line_size()),
GFP_KERNEL);
To fix this, always provide a sane value for ->x86_clflush_size.
Big thanks to Andy Shevchenko for finding and reporting this and also
providing a first pass at a fix. But his fix was only partial and only
worked on the Quark CPUs. It would not, for instance, have worked on
the QEMU config.
1. https://raw.githubusercontent.com/InstLatx64/InstLatx64/master/GenuineIntel/GenuineIntel0000590_Clanton_03_CPUID.txt
2. You can also get this behavior if you use "-cpu 486,+clzero"
in QEMU.
[ dhansen: remove 'vp_bits_from_cpuid' reference in changelog
because bpetkov brutally murdered it recently. ]
Fixes: fbf6449f84 ("x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Jörn Heusipp <osmanx@heusipp.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240516173928.3960193-1-andriy.shevchenko@linux.intel.com/
Link: https://lore.kernel.org/lkml/5e31cad3-ad4d-493e-ab07-724cfbfaba44@heusipp.de/
Link: https://lore.kernel.org/all/20240517200534.8EC5F33E%40davehans-spike.ostc.intel.com
Support for posted interrupts on bare metal
Posted interrupts is a virtualization feature which allows to inject
interrupts directly into a guest without host interaction. The VT-d
interrupt remapping hardware sets the bit which corresponds to the
interrupt vector in a vector bitmap which is either used to inject the
interrupt directly into the guest via a virtualized APIC or in case
that the guest is scheduled out provides a host side notification
interrupt which informs the host that an interrupt has been marked
pending in the bitmap.
This can be utilized on bare metal for scenarios where multiple
devices, e.g. NVME storage, raise interrupts with a high frequency. In
the default mode these interrupts are handles independently and
therefore require a full roundtrip of interrupt entry/exit.
Utilizing posted interrupts this roundtrip overhead can be avoided by
coalescing these interrupt entries to a single entry for the posted
interrupt notification. The notification interrupt then demultiplexes
the pending bits in a memory based bitmap and invokes the corresponding
device specific handlers.
Depending on the usage scenario and device utilization throughput
improvements between 10% and 130% have been measured.
As this is only relevant for high end servers with multiple device
queues per CPU attached and counterproductive for situations where
interrupts are arriving at distinct times, the functionality is opt-in
via a kernel command line parameter.
-----BEGIN PGP SIGNATURE-----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=bqLN
-----END PGP SIGNATURE-----
Merge tag 'x86-irq-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 interrupt handling updates from Thomas Gleixner:
"Add support for posted interrupts on bare metal.
Posted interrupts is a virtualization feature which allows to inject
interrupts directly into a guest without host interaction. The VT-d
interrupt remapping hardware sets the bit which corresponds to the
interrupt vector in a vector bitmap which is either used to inject the
interrupt directly into the guest via a virtualized APIC or in case
that the guest is scheduled out provides a host side notification
interrupt which informs the host that an interrupt has been marked
pending in the bitmap.
This can be utilized on bare metal for scenarios where multiple
devices, e.g. NVME storage, raise interrupts with a high frequency. In
the default mode these interrupts are handles independently and
therefore require a full roundtrip of interrupt entry/exit.
Utilizing posted interrupts this roundtrip overhead can be avoided by
coalescing these interrupt entries to a single entry for the posted
interrupt notification. The notification interrupt then demultiplexes
the pending bits in a memory based bitmap and invokes the
corresponding device specific handlers.
Depending on the usage scenario and device utilization throughput
improvements between 10% and 130% have been measured.
As this is only relevant for high end servers with multiple device
queues per CPU attached and counterproductive for situations where
interrupts are arriving at distinct times, the functionality is opt-in
via a kernel command line parameter"
* tag 'x86-irq-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Use existing helper for pending vector check
iommu/vt-d: Enable posted mode for device MSIs
iommu/vt-d: Make posted MSI an opt-in command line option
x86/irq: Extend checks for pending vectors to posted interrupts
x86/irq: Factor out common code for checking pending interrupts
x86/irq: Install posted MSI notification handler
x86/irq: Factor out handler invocation from common_interrupt()
x86/irq: Set up per host CPU posted interrupt descriptors
x86/irq: Reserve a per CPU IDT vector for posted MSIs
x86/irq: Add a Kconfig option for posted MSI
x86/irq: Remove bitfields in posted interrupt descriptor
x86/irq: Unionize PID.PIR for 64bit access w/o casting
KVM: VMX: Move posted interrupt descriptor out of VMX code
To support posted MSIs, create a posted interrupt descriptor (PID) for each
host CPU. Later on, when setting up interrupt affinity, the IOMMU's
interrupt remapping table entry (IRTE) will point to the physical address
of the matching CPU's PID.
Each PID is initialized with the owner CPU's physical APICID as the
destination.
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423174114.526704-7-jacob.jun.pan@linux.intel.com
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240424181507.41693-1-tony.luck@intel.com
There's a new conflict between this commit pending in x86/cpu:
63edbaa48a x86/cpu/topology: Add support for the AMD 0x80000026 leaf
And these fixes in x86/urgent:
c064b536a8 x86/cpu/amd: Make the NODEID_MSR union actually work
1b3108f689 x86/cpu/amd: Make the CPUID 0x80000008 parser correct
Resolve them.
Conflicts:
arch/x86/kernel/cpu/topology_amd.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So we are using the 'ia32_cap' value in a number of places,
which got its name from MSR_IA32_ARCH_CAPABILITIES MSR register.
But there's very little 'IA32' about it - this isn't 32-bit only
code, nor does it originate from there, it's just a historic
quirk that many Intel MSR names are prefixed with IA32_.
This is already clear from the helper method around the MSR:
x86_read_arch_cap_msr(), which doesn't have the IA32 prefix.
So rename 'ia32_cap' to 'x86_arch_cap_msr' to be consistent with
its role and with the naming of the helper function.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/9592a18a814368e75f8f4b9d74d3883aa4fd1eaf.1712813475.git.jpoimboe@kernel.org
Mitigation for BHI is selected based on the bug enumeration. Add bits
needed to enumerate BHI bug.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
The boot sequence evaluates CPUID information twice:
1) During early boot
2) When finalizing the early setup right before
mitigations are selected and alternatives are patched.
In both cases the evaluation is stored in boot_cpu_data, but on UP the
copying of boot_cpu_data to the per CPU info of the boot CPU happens
between #1 and #2. So any update which happens in #2 is never propagated to
the per CPU info instance.
Consolidate the whole logic and copy boot_cpu_data right before applying
alternatives as that's the point where boot_cpu_data is in it's final
state and not supposed to change anymore.
This also removes the voodoo mb() from smp_prepare_cpus_common() which
had absolutely no purpose.
Fixes: 71eb4893cf ("x86/percpu: Cure per CPU madness on UP")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.127642785@linutronix.de
Drop 'vp_bits_from_cpuid' as it is not really needed.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240316120706.4352-1-bp@alien8.de
-----BEGIN PGP SIGNATURE-----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=5V9t
-----END PGP SIGNATURE-----
Merge tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RFDS mitigation from Dave Hansen:
"RFDS is a CPU vulnerability that may allow a malicious userspace to
infer stale register values from kernel space. Kernel registers can
have all kinds of secrets in them so the mitigation is basically to
wait until the kernel is about to return to userspace and has user
values in the registers. At that point there is little chance of
kernel secrets ending up in the registers and the microarchitectural
state can be cleared.
This leverages some recent robustness fixes for the existing MDS
vulnerability. Both MDS and RFDS use the VERW instruction for
mitigation"
* tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM/x86: Export RFDS_NO and RFDS_CLEAR to guests
x86/rfds: Mitigate Register File Data Sampling (RFDS)
Documentation/hw-vuln: Add documentation for RFDS
x86/mmio: Disable KVM mitigation when X86_FEATURE_CLEAR_CPU_BUF is set
- The biggest change is the rework of the percpu code,
to support the 'Named Address Spaces' GCC feature,
by Uros Bizjak:
- This allows C code to access GS and FS segment relative
memory via variables declared with such attributes,
which allows the compiler to better optimize those accesses
than the previous inline assembly code.
- The series also includes a number of micro-optimizations
for various percpu access methods, plus a number of
cleanups of %gs accesses in assembly code.
- These changes have been exposed to linux-next testing for
the last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally
working handling of FPU switching - which also generates
better code.
- Propagate more RIP-relative addressing in assembly code,
to generate slightly better code.
- Rework the CPU mitigations Kconfig space to be less idiosyncratic,
to make it easier for distros to follow & maintain these options.
- Rework the x86 idle code to cure RCU violations and
to clean up the logic.
- Clean up the vDSO Makefile logic.
- Misc cleanups and fixes.
[ Please note that there's a higher number of merge commits in
this branch (three) than is usual in x86 topic trees. This happened
due to the long testing lifecycle of the percpu changes that
involved 3 merge windows, which generated a longer history
and various interactions with other core x86 changes that we
felt better about to carry in a single branch. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3v4F
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- The biggest change is the rework of the percpu code, to support the
'Named Address Spaces' GCC feature, by Uros Bizjak:
- This allows C code to access GS and FS segment relative memory
via variables declared with such attributes, which allows the
compiler to better optimize those accesses than the previous
inline assembly code.
- The series also includes a number of micro-optimizations for
various percpu access methods, plus a number of cleanups of %gs
accesses in assembly code.
- These changes have been exposed to linux-next testing for the
last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally working handling
of FPU switching - which also generates better code
- Propagate more RIP-relative addressing in assembly code, to generate
slightly better code
- Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
make it easier for distros to follow & maintain these options
- Rework the x86 idle code to cure RCU violations and to clean up the
logic
- Clean up the vDSO Makefile logic
- Misc cleanups and fixes
* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/idle: Select idle routine only once
x86/idle: Let prefer_mwait_c1_over_halt() return bool
x86/idle: Cleanup idle_setup()
x86/idle: Clean up idle selection
x86/idle: Sanitize X86_BUG_AMD_E400 handling
sched/idle: Conditionally handle tick broadcast in default_idle_call()
x86: Increase brk randomness entropy for 64-bit systems
x86/vdso: Move vDSO to mmap region
x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
x86/retpoline: Ensure default return thunk isn't used at runtime
x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
x86/vdso: Use $(addprefix ) instead of $(foreach )
x86/vdso: Simplify obj-y addition
x86/vdso: Consolidate targets and clean-files
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS
...
cure Sparse warnings.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0eJ7
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups, including a large series from Thomas Gleixner to cure
sparse warnings"
* tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Drop unused declaration of proc_nmi_enabled()
x86/callthunks: Use EXPORT_PER_CPU_SYMBOL_GPL() for per CPU variables
x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation
x86/cpu: Use EXPORT_PER_CPU_SYMBOL_GPL() for x86_spec_ctrl_current
x86/uaccess: Add missing __force to casts in __access_ok() and valid_user_address()
x86/percpu: Cure per CPU madness on UP
smp: Consolidate smp_prepare_boot_cpu()
x86/msr: Add missing __percpu annotations
x86/msr: Prepare for including <linux/percpu.h> into <asm/msr.h>
perf/x86/amd/uncore: Fix __percpu annotation
x86/nmi: Remove an unnecessary IS_ENABLED(CONFIG_SMP)
x86/apm_32: Remove dead function apm_get_battery_status()
x86/insn-eval: Fix function param name in get_eff_addr_sib()
kernel to be used as a KVM hypervisor capable of running SNP (Secure
Nested Paging) guests. Roughly speaking, SEV-SNP is the ultimate goal
of the AMD confidential computing side, providing the most
comprehensive confidential computing environment up to date.
This is the x86 part and there is a KVM part which did not get ready
in time for the merge window so latter will be forthcoming in the next
cycle.
- Rework the early code's position-dependent SEV variable references in
order to allow building the kernel with clang and -fPIE/-fPIC and
-mcmodel=kernel
- The usual set of fixes, cleanups and improvements all over the place
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmXvH0wACgkQEsHwGGHe
VUrzmA//VS/n6dhHRnm/nAGngr4PeegkgV1OhyKYFfiZ272rT6P9QvblQrgcY0dc
Ij1DOhEKlke51pTHvMOQ33B3P4Fuc0mx3dpCLY0up5V26kzQiKCjRKEkC4U1bcw8
W4GqMejaR89bE14bYibmwpSib9T/uVsV65eM3xf1iF5UvsnoUaTziymDoy+nb43a
B1pdd5vcl4mBNqXeEvt0qjg+xkMLpWUI9tJDB8mbMl/cnIFGgMZzBaY8oktHSROK
QpuUnKegOgp1RXpfLbNjmZ2Q4Rkk4MNazzDzWq3EIxaRjXL3Qp507ePK7yeA2qa0
J3jCBQc9E2j7lfrIkUgNIzOWhMAXM2YH5bvH6UrIcMi1qsWJYDmkp2MF1nUedjdf
Wj16/pJbeEw1aKKIywJGwsmViSQju158vY3SzXG83U/A/Iz7zZRHFmC/ALoxZptY
Bi7VhfcOSpz98PE3axnG8CvvxRDWMfzBr2FY1VmQbg6VBNo1Xl1aP/IH1I8iQNKg
/laBYl/qP+1286TygF1lthYROb1lfEIJprgi2xfO6jVYUqPb7/zq2sm78qZRfm7l
25PN/oHnuidfVfI/H3hzcGubjOG9Zwra8WWYBB2EEmelf21rT0OLqq+eS4T6pxFb
GNVfc0AzG77UmqbrpkAMuPqL7LrGaSee4NdU3hkEdSphlx1/YTo=
=c1ps
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Add the x86 part of the SEV-SNP host support.
This will allow the kernel to be used as a KVM hypervisor capable of
running SNP (Secure Nested Paging) guests. Roughly speaking, SEV-SNP
is the ultimate goal of the AMD confidential computing side,
providing the most comprehensive confidential computing environment
up to date.
This is the x86 part and there is a KVM part which did not get ready
in time for the merge window so latter will be forthcoming in the
next cycle.
- Rework the early code's position-dependent SEV variable references in
order to allow building the kernel with clang and -fPIE/-fPIC and
-mcmodel=kernel
- The usual set of fixes, cleanups and improvements all over the place
* tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/sev: Disable KMSAN for memory encryption TUs
x86/sev: Dump SEV_STATUS
crypto: ccp - Have it depend on AMD_IOMMU
iommu/amd: Fix failure return from snp_lookup_rmpentry()
x86/sev: Fix position dependent variable references in startup code
crypto: ccp: Make snp_range_list static
x86/Kconfig: Remove CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT
Documentation: virt: Fix up pre-formatted text block for SEV ioctls
crypto: ccp: Add the SNP_SET_CONFIG command
crypto: ccp: Add the SNP_COMMIT command
crypto: ccp: Add the SNP_PLATFORM_STATUS command
x86/cpufeatures: Enable/unmask SEV-SNP CPU feature
KVM: SEV: Make AVIC backing, VMSA and VMCB memory allocation SNP safe
crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump
iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown
crypto: ccp: Handle legacy SEV commands when SNP is enabled
crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled
crypto: ccp: Handle the legacy TMR allocation when SNP is enabled
x86/sev: Introduce an SNP leaked pages list
crypto: ccp: Provide an API to issue SEV and SNP commands
...
FRED is a replacement for IDT event delivery on x86 and addresses most of
the technical nightmares which IDT exposes:
1) Exception cause registers like CR2 need to be manually preserved in
nested exception scenarios.
2) Hardware interrupt stack switching is suboptimal for nested exceptions
as the interrupt stack mechanism rewinds the stack on each entry which
requires a massive effort in the low level entry of #NMI code to handle
this.
3) No hardware distinction between entry from kernel or from user which
makes establishing kernel context more complex than it needs to be
especially for unconditionally nestable exceptions like NMI.
4) NMI nesting caused by IRET unconditionally reenabling NMIs, which is a
problem when the perf NMI takes a fault when collecting a stack trace.
5) Partial restore of ESP when returning to a 16-bit segment
6) Limitation of the vector space which can cause vector exhaustion on
large systems.
7) Inability to differentiate NMI sources
FRED addresses these shortcomings by:
1) An extended exception stack frame which the CPU uses to save exception
cause registers. This ensures that the meta information for each
exception is preserved on stack and avoids the extra complexity of
preserving it in software.
2) Hardware interrupt stack switching is non-rewinding if a nested
exception uses the currently interrupt stack.
3) The entry points for kernel and user context are separate and GS BASE
handling which is required to establish kernel context for per CPU
variable access is done in hardware.
4) NMIs are now nesting protected. They are only reenabled on the return
from NMI.
5) FRED guarantees full restore of ESP
6) FRED does not put a limitation on the vector space by design because it
uses a central entry points for kernel and user space and the CPUstores
the entry type (exception, trap, interrupt, syscall) on the entry stack
along with the vector number. The entry code has to demultiplex this
information, but this removes the vector space restriction.
The first hardware implementations will still have the current
restricted vector space because lifting this limitation requires
further changes to the local APIC.
7) FRED stores the vector number and meta information on stack which
allows having more than one NMI vector in future hardware when the
required local APIC changes are in place.
The series implements the initial FRED support by:
- Reworking the existing entry and IDT handling infrastructure to
accomodate for the alternative entry mechanism.
- Expanding the stack frame to accomodate for the extra 16 bytes FRED
requires to store context and meta information
- Providing FRED specific C entry points for events which have information
pushed to the extended stack frame, e.g. #PF and #DB.
- Providing FRED specific C entry points for #NMI and #MCE
- Implementing the FRED specific ASM entry points and the C code to
demultiplex the events
- Providing detection and initialization mechanisms and the necessary
tweaks in context switching, GS BASE handling etc.
The FRED integration aims for maximum code reuse vs. the existing IDT
implementation to the extent possible and the deviation in hot paths like
context switching are handled with alternatives to minimalize the
impact. The low level entry and exit paths are seperate due to the extended
stack frame and the hardware based GS BASE swichting and therefore have no
impact on IDT based systems.
It has been extensively tested on existing systems and on the FRED
simulation and as of now there are know outstanding problems.
-----BEGIN PGP SIGNATURE-----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=Ib7w
-----END PGP SIGNATURE-----
Merge tag 'x86-fred-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FRED support from Thomas Gleixner:
"Support for x86 Fast Return and Event Delivery (FRED).
FRED is a replacement for IDT event delivery on x86 and addresses most
of the technical nightmares which IDT exposes:
1) Exception cause registers like CR2 need to be manually preserved
in nested exception scenarios.
2) Hardware interrupt stack switching is suboptimal for nested
exceptions as the interrupt stack mechanism rewinds the stack on
each entry which requires a massive effort in the low level entry
of #NMI code to handle this.
3) No hardware distinction between entry from kernel or from user
which makes establishing kernel context more complex than it needs
to be especially for unconditionally nestable exceptions like NMI.
4) NMI nesting caused by IRET unconditionally reenabling NMIs, which
is a problem when the perf NMI takes a fault when collecting a
stack trace.
5) Partial restore of ESP when returning to a 16-bit segment
6) Limitation of the vector space which can cause vector exhaustion
on large systems.
7) Inability to differentiate NMI sources
FRED addresses these shortcomings by:
1) An extended exception stack frame which the CPU uses to save
exception cause registers. This ensures that the meta information
for each exception is preserved on stack and avoids the extra
complexity of preserving it in software.
2) Hardware interrupt stack switching is non-rewinding if a nested
exception uses the currently interrupt stack.
3) The entry points for kernel and user context are separate and GS
BASE handling which is required to establish kernel context for
per CPU variable access is done in hardware.
4) NMIs are now nesting protected. They are only reenabled on the
return from NMI.
5) FRED guarantees full restore of ESP
6) FRED does not put a limitation on the vector space by design
because it uses a central entry points for kernel and user space
and the CPUstores the entry type (exception, trap, interrupt,
syscall) on the entry stack along with the vector number. The
entry code has to demultiplex this information, but this removes
the vector space restriction.
The first hardware implementations will still have the current
restricted vector space because lifting this limitation requires
further changes to the local APIC.
7) FRED stores the vector number and meta information on stack which
allows having more than one NMI vector in future hardware when the
required local APIC changes are in place.
The series implements the initial FRED support by:
- Reworking the existing entry and IDT handling infrastructure to
accomodate for the alternative entry mechanism.
- Expanding the stack frame to accomodate for the extra 16 bytes FRED
requires to store context and meta information
- Providing FRED specific C entry points for events which have
information pushed to the extended stack frame, e.g. #PF and #DB.
- Providing FRED specific C entry points for #NMI and #MCE
- Implementing the FRED specific ASM entry points and the C code to
demultiplex the events
- Providing detection and initialization mechanisms and the necessary
tweaks in context switching, GS BASE handling etc.
The FRED integration aims for maximum code reuse vs the existing IDT
implementation to the extent possible and the deviation in hot paths
like context switching are handled with alternatives to minimalize the
impact. The low level entry and exit paths are seperate due to the
extended stack frame and the hardware based GS BASE swichting and
therefore have no impact on IDT based systems.
It has been extensively tested on existing systems and on the FRED
simulation and as of now there are no outstanding problems"
* tag 'x86-fred-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
x86/fred: Fix init_task thread stack pointer initialization
MAINTAINERS: Add a maintainer entry for FRED
x86/fred: Fix a build warning with allmodconfig due to 'inline' failing to inline properly
x86/fred: Invoke FRED initialization code to enable FRED
x86/fred: Add FRED initialization functions
x86/syscall: Split IDT syscall setup code into idt_syscall_init()
KVM: VMX: Call fred_entry_from_kvm() for IRQ/NMI handling
x86/entry: Add fred_entry_from_kvm() for VMX to handle IRQ/NMI
x86/entry/calling: Allow PUSH_AND_CLEAR_REGS being used beyond actual entry code
x86/fred: Fixup fault on ERETU by jumping to fred_entrypoint_user
x86/fred: Let ret_from_fork_asm() jmp to asm_fred_exit_user when FRED is enabled
x86/traps: Add sysvec_install() to install a system interrupt handler
x86/fred: FRED entry/exit and dispatch code
x86/fred: Add a machine check entry stub for FRED
x86/fred: Add a NMI entry stub for FRED
x86/fred: Add a debug fault entry stub for FRED
x86/idtentry: Incorporate definitions/declarations of the FRED entries
x86/fred: Make exc_page_fault() work for FRED
x86/fred: Allow single-step trap and NMI when starting a new task
x86/fred: No ESPFIX needed when FRED is enabled
...
RFDS is a CPU vulnerability that may allow userspace to infer kernel
stale data previously used in floating point registers, vector registers
and integer registers. RFDS only affects certain Intel Atom processors.
Intel released a microcode update that uses VERW instruction to clear
the affected CPU buffers. Unlike MDS, none of the affected cores support
SMT.
Add RFDS bug infrastructure and enable the VERW based mitigation by
default, that clears the affected buffers just before exiting to
userspace. Also add sysfs reporting and cmdline parameter
"reg_file_data_sampling" to control the mitigation.
For details see:
Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
The idle routine selection is done on every CPU bringup operation and
has a guard in place which is effective after the first invocation,
which is a pointless exercise.
Invoke it once on the boot CPU and mark the related functions __init.
The guard check has to stay as xen_set_default_idle() runs early.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/87edcu6vaq.ffs@tglx
On UP builds Sparse complains rightfully about accesses to cpu_info with
per CPU accessors:
cacheinfo.c:282:30: sparse: warning: incorrect type in initializer (different address spaces)
cacheinfo.c:282:30: sparse: expected void const [noderef] __percpu *__vpp_verify
cacheinfo.c:282:30: sparse: got unsigned int *
The reason is that on UP builds cpu_info which is a per CPU variable on SMP
is mapped to boot_cpu_info which is a regular variable. There is a hideous
accessor cpu_data() which tries to hide this, but it's not sufficient as
some places require raw accessors and generates worse code than the regular
per CPU accessors.
Waste sizeof(struct x86_cpuinfo) memory on UP and provide the per CPU
cpu_info unconditionally. This requires to update the CPU info on the boot
CPU as SMP does. (Ab)use the weakly defined smp_prepare_boot_cpu() function
and implement exactly that.
This allows to use regular per CPU accessors uncoditionally and paves the
way to remove the cpu_data() hackery.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240304005104.622511517@linutronix.de
In commit fbf6449f84 ("x86/sev-es: Set x86_virt_bits to the correct
value straight away, instead of a two-phase approach"), the initialization
of c->x86_phys_bits was moved after this_cpu->c_early_init(c). This is
incorrect because early_init_amd() expected to be able to reduce the
value according to the contents of CPUID leaf 0x8000001f.
Fortunately, the bug was negated by init_amd()'s call to early_init_amd(),
which does reduce x86_phys_bits in the end. However, this is very
late in the boot process and, most notably, the wrong value is used for
x86_phys_bits when setting up MTRRs.
To fix this, call get_cpu_address_sizes() as soon as X86_FEATURE_CPUID is
set/cleared, and c->extended_cpuid_level is retrieved.
Fixes: fbf6449f84 ("x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240131230902.1867092-2-pbonzini%40redhat.com
Now that __num_cores_per_package and __num_threads_per_package are
available, cpuinfo::x86_max_cores and the related math all over the place
can be replaced with the ready to consume data.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210253.176147806@linutronix.de
Expose properly accounted information and accessors so the fiddling with
other topology variables can be replaced.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210253.120958987@linutronix.de
It's really a non-intuitive name. Rename it to __max_threads_per_core which
is obvious.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210253.011307973@linutronix.de
Replace the logical package and die management functionality and retrieve
the logical IDs from the topology bitmaps.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210252.901865302@linutronix.de
Now that all possible APIC IDs are tracked in the topology bitmaps, its
trivial to retrieve the real information from there.
This gets rid of the guesstimates for the maximal packages and dies per
package as the actual numbers can be determined before a single AP has been
brought up.
The number of SMT threads can now be determined correctly from the bitmaps
in all situations. Up to now a system which has SMT disabled in the BIOS
will still claim that it is SMT capable, because the lowest APIC ID bit is
reserved for that and CPUID leaf 0xb/0x1f still enumerates the SMT domain
accordingly. By calculating the bitmap weights of the SMT and the CORE
domain and setting them into relation the SMT disabled in BIOS situation
reports correctly that the system is not SMT capable.
It also handles the situation correctly when a hybrid systems boot CPU does
not have SMT as it takes the SMT capability of the APs fully into account.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210252.681709880@linutronix.de
Detect all possible combinations of mismatch right in the CPUID evaluation
code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154638.867699078@linutronix.de
Switch it over to use the consolidated topology evaluation and remove the
temporary safe guards which are not longer needed.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153625.207750409@linutronix.de
Intel CPUs use either topology leaf 0xb/0x1f evaluation or the legacy
SMP/HT evaluation based on CPUID leaf 0x1/0x4.
Move it over to the consolidated topology code and remove the random
topology hacks which are sprinkled into the Intel and the common code.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153624.893644349@linutronix.de
In preparation of a complete replacement for the topology leaf 0xb/0x1f
evaluation, move __max_die_per_package into the common code.
Will be removed once everything is converted over.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153624.768188958@linutronix.de
The legacy topology detection via CPUID leaf 4, which provides the number
of cores in the package and CPUID leaf 1 which provides the number of
logical CPUs in case that FEATURE_HT is enabled and the CMP_LEGACY feature
is not set, is shared for Intel, Centaur and Zhaoxin CPUs.
Lift the code from common.c without the early detection hack and provide it
as common fallback mechanism.
Will be utilized in later changes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153624.644448852@linutronix.de
Topology evaluation is a complete disaster and impenetrable mess. It's
scattered all over the place with some vendor implementations doing early
evaluation and some not. The most horrific part is the permanent
overwriting of smt_max_siblings and __max_die_per_package, instead of
establishing them once on the boot CPU and validating the result on the
APs.
The goals are:
- One topology evaluation entry point
- Proper sharing of pointlessly duplicated code
- Proper structuring of the evaluation logic and preferences.
- Evaluating important system wide information only once on the boot CPU
- Making the 0xb/0x1f leaf parsing less convoluted and actually fixing
the short comings of leaf 0x1f evaluation.
Start to consolidate the topology evaluation code by providing the entry
points for the early boot CPU evaluation and for the final parsing on the
boot CPU and the APs.
Move the trivial pieces into that new code:
- The initialization of cpuinfo_x86::topo
- The evaluation of CPUID leaf 1, which presets topo::initial_apicid
- topo_apicid is set to topo::initial_apicid when invoked from early
boot. When invoked for the final evaluation on the boot CPU it reads
the actual APIC ID, which makes apic_get_initial_apicid() obsolete
once everything is converted over.
Provide a temporary helper function topo_converted() which shields off the
not yet converted CPU vendors from invoking code which would break them.
This shielding covers all vendor CPUs which support SMP, but not the
historical pure UP ones as they only need the topology info init and
eventually the initial APIC initialization.
Provide two new members in cpuinfo_x86::topo to store the maximum number of
SMT siblings and the number of dies per package and add them to the debugfs
readout. These two members will be used to populate this information on the
boot CPU and to validate the APs against it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240212153624.581436579@linutronix.de
Let cpu_init_exception_handling() call cpu_init_fred_exceptions() to
initialize FRED. However if FRED is unavailable or disabled, it falls
back to set up TSS IST and initialize IDT.
Co-developed-by: Xin Li <xin3.li@intel.com>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-36-xin3.li@intel.com
Because FRED uses the ring 3 FRED entrypoint for SYSCALL and SYSENTER and
ERETU is the only legit instruction to return to ring 3, there is NO need
to setup SYSCALL and SYSENTER MSRs for FRED, except the IA32_STAR MSR.
Split IDT syscall setup code into idt_syscall_init() to make it easy to
skip syscall setup code when FRED is enabled.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-34-xin3.li@intel.com
Add X86_CR4_FRED macro for the FRED bit in %cr4. This bit must not be
changed after initialization, so add it to the pinned CR4 bits.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-12-xin3.li@intel.com
Without SEV-SNP, Automatic IBRS protects only the kernel. But when
SEV-SNP is enabled, the Automatic IBRS protection umbrella widens to all
host-side code, including userspace. This protection comes at a cost:
reduced userspace indirect branch performance.
To avoid this performance loss, don't use Automatic IBRS on SEV-SNP
hosts and all back to retpolines instead.
[ mdr: squash in changes from review discussion. ]
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lore.kernel.org/r/20240126041126.1927228-3-michael.roth@amd.com
-----BEGIN PGP SIGNATURE-----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=1EJI
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"This contains the initial support for host-side TDX support so that
KVM can run TDX-protected guests. This does not include the actual
KVM-side support which will come from the KVM folks. The TDX host
interactions with kexec also needs to be ironed out before this is
ready for prime time, so this code is currently Kconfig'd off when
kexec is on.
The majority of the code here is the kernel telling the TDX module
which memory to protect and handing some additional memory over to it
to use to store TDX module metadata. That sounds pretty simple, but
the TDX architecture is rather flexible and it takes quite a bit of
back-and-forth to say, "just protect all memory, please."
There is also some code tacked on near the end of the series to handle
a hardware erratum. The erratum can make software bugs such as a
kernel write to TDX-protected memory cause a machine check and
masquerade as a real hardware failure. The erratum handling watches
out for these and tries to provide nicer user errors"
* tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/virt/tdx: Make TDX host depend on X86_MCE
x86/virt/tdx: Disable TDX host support when kexec is enabled
Documentation/x86: Add documentation for TDX host support
x86/mce: Differentiate real hardware #MCs from TDX erratum ones
x86/cpu: Detect TDX partial write machine check erratum
x86/virt/tdx: Handle TDX interaction with sleep and hibernation
x86/virt/tdx: Initialize all TDMRs
x86/virt/tdx: Configure global KeyID on all packages
x86/virt/tdx: Configure TDX module with the TDMRs and global KeyID
x86/virt/tdx: Designate reserved areas for all TDMRs
x86/virt/tdx: Allocate and set up PAMTs for TDMRs
x86/virt/tdx: Fill out TDMRs to cover all TDX memory regions
x86/virt/tdx: Add placeholder to construct TDMRs to cover all TDX memory regions
x86/virt/tdx: Get module global metadata for module initialization
x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory
x86/virt/tdx: Add skeleton to enable TDX on demand
x86/virt/tdx: Add SEAMCALL error printing for module initialization
x86/virt/tdx: Handle SEAMCALL no entropy error in common code
x86/virt/tdx: Make INTEL_TDX_HOST depend on X86_X2APIC
x86/virt/tdx: Define TDX supported page sizes as macros
...
- Replace magic numbers in GDT descriptor definitions & handling:
- Introduce symbolic names via macros for descriptor types/fields/flags,
and then use these symbolic names.
- Clean up definitions a bit, such as GDT_ENTRY_INIT()
- Fix/clean up details that became visibly inconsistent after the
symbol-based code was introduced:
- Unify accessed flag handling
- Set the D/B size flag consistently & according to the HW specification
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Y0pg
-----END PGP SIGNATURE-----
Merge tag 'x86-asm-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
"Replace magic numbers in GDT descriptor definitions & handling:
- Introduce symbolic names via macros for descriptor
types/fields/flags, and then use these symbolic names.
- Clean up definitions a bit, such as GDT_ENTRY_INIT()
- Fix/clean up details that became visibly inconsistent after the
symbol-based code was introduced:
- Unify accessed flag handling
- Set the D/B size flag consistently & according to the HW
specification"
* tag 'x86-asm-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Add DB flag to 32-bit percpu GDT entry
x86/asm: Always set A (accessed) flag in GDT descriptors
x86/asm: Replace magic numbers in GDT descriptors, script-generated change
x86/asm: Replace magic numbers in GDT descriptors, preparations
x86/asm: Provide new infrastructure for GDT descriptors
We have no known use for having the CPU track whether GDT descriptors
have been accessed or not.
Simplify the code by adding the flag to the common flags and removing
it everywhere else.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231219151200.2878271-5-vegard.nossum@oracle.com
Actually replace the numeric values by the new symbolic values.
I used this to find all the existing users of the GDT_ENTRY*() macros:
$ git grep -P 'GDT_ENTRY(_INIT)?\('
Some of the lines will exceed 80 characters, but some of them will be
shorter again in the next couple of patches.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231219151200.2878271-4-vegard.nossum@oracle.com
We'd like to replace all the magic numbers in various GDT descriptors
with new, semantically meaningful, symbolic values.
In order to be able to verify that the change doesn't cause any actual
changes to the compiled binary code, I've split the change into two
patches:
- Part 1 (this commit): everything _but_ actually replacing the numbers
- Part 2 (the following commit): _only_ replacing the numbers
The reason we need this split for verification is that including new
headers causes some spurious changes to the object files, mostly line
number changes in the debug info but occasionally other subtle codegen
changes.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231219151200.2878271-3-vegard.nossum@oracle.com
Intel Trust Domain Extensions (TDX) protects guest VMs from malicious
host and certain physical attacks. A CPU-attested software module
called 'the TDX module' runs inside a new isolated memory range as a
trusted hypervisor to manage and run protected VMs.
Pre-TDX Intel hardware has support for a memory encryption architecture
called MKTME. The memory encryption hardware underpinning MKTME is also
used for Intel TDX. TDX ends up "stealing" some of the physical address
space from the MKTME architecture for crypto-protection to VMs. The
BIOS is responsible for partitioning the "KeyID" space between legacy
MKTME and TDX. The KeyIDs reserved for TDX are called 'TDX private
KeyIDs' or 'TDX KeyIDs' for short.
During machine boot, TDX microcode verifies that the BIOS programmed TDX
private KeyIDs consistently and correctly programmed across all CPU
packages. The MSRs are locked in this state after verification. This
is why MSR_IA32_MKTME_KEYID_PARTITIONING gets used for TDX enumeration:
it indicates not just that the hardware supports TDX, but that all the
boot-time security checks passed.
The TDX module is expected to be loaded by the BIOS when it enables TDX,
but the kernel needs to properly initialize it before it can be used to
create and run any TDX guests. The TDX module will be initialized by
the KVM subsystem when KVM wants to use TDX.
Detect platform TDX support by detecting TDX private KeyIDs.
The TDX module itself requires one TDX KeyID as the 'TDX global KeyID'
to protect its metadata. Each TDX guest also needs a TDX KeyID for its
own protection. Just use the first TDX KeyID as the global KeyID and
leave the rest for TDX guests. If no TDX KeyID is left for TDX guests,
disable TDX as initializing the TDX module alone is useless.
[ dhansen: add X86_FEATURE, replace helper function ]
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/all/20231208170740.53979-1-dave.hansen%40intel.com
AMD does not have the requirement for a synchronization barrier when
acccessing a certain group of MSRs. Do not incur that unnecessary
penalty there.
There will be a CPUID bit which explicitly states that a MFENCE is not
needed. Once that bit is added to the APM, this will be extended with
it.
While at it, move to processor.h to avoid include hell. Untangling that
file properly is a matter for another day.
Some notes on the performance aspect of why this is relevant, courtesy
of Kishon VijayAbraham <Kishon.VijayAbraham@amd.com>:
On a AMD Zen4 system with 96 cores, a modified ipi-bench[1] on a VM
shows x2AVIC IPI rate is 3% to 4% lower than AVIC IPI rate. The
ipi-bench is modified so that the IPIs are sent between two vCPUs in the
same CCX. This also requires to pin the vCPU to a physical core to
prevent any latencies. This simulates the use case of pinning vCPUs to
the thread of a single CCX to avoid interrupt IPI latency.
In order to avoid run-to-run variance (for both x2AVIC and AVIC), the
below configurations are done:
1) Disable Power States in BIOS (to prevent the system from going to
lower power state)
2) Run the system at fixed frequency 2500MHz (to prevent the system
from increasing the frequency when the load is more)
With the above configuration:
*) Performance measured using ipi-bench for AVIC:
Average Latency: 1124.98ns [Time to send IPI from one vCPU to another vCPU]
Cumulative throughput: 42.6759M/s [Total number of IPIs sent in a second from
48 vCPUs simultaneously]
*) Performance measured using ipi-bench for x2AVIC:
Average Latency: 1172.42ns [Time to send IPI from one vCPU to another vCPU]
Cumulative throughput: 40.9432M/s [Total number of IPIs sent in a second from
48 vCPUs simultaneously]
From above, x2AVIC latency is ~4% more than AVIC. However, the expectation is
x2AVIC performance to be better or equivalent to AVIC. Upon analyzing
the perf captures, it is observed significant time is spent in
weak_wrmsr_fence() invoked by x2apic_send_IPI().
With the fix to skip weak_wrmsr_fence()
*) Performance measured using ipi-bench for x2AVIC:
Average Latency: 1117.44ns [Time to send IPI from one vCPU to another vCPU]
Cumulative throughput: 42.9608M/s [Total number of IPIs sent in a second from
48 vCPUs simultaneously]
Comparing the performance of x2AVIC with and without the fix, it can be seen
the performance improves by ~4%.
Performance captured using an unmodified ipi-bench using the 'mesh-ipi' option
with and without weak_wrmsr_fence() on a Zen4 system also showed significant
performance improvement without weak_wrmsr_fence(). The 'mesh-ipi' option ignores
CCX or CCD and just picks random vCPU.
Average throughput (10 iterations) with weak_wrmsr_fence(),
Cumulative throughput: 4933374 IPI/s
Average throughput (10 iterations) without weak_wrmsr_fence(),
Cumulative throughput: 6355156 IPI/s
[1] https://github.com/bytedance/kvm-utils/tree/master/microbenchmark/ipi-bench
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230622095212.20940-1-bp@alien8.de
Gleixner:
- Restructure the code needed for it and add a temporary initrd mapping
on 32-bit so that the loader can access the microcode blobs. This in
itself is a preparation for the next major improvement:
- Do not load microcode on 32-bit before paging has been enabled.
Handling this has caused an endless stream of headaches, issues, ugly
code and unnecessary hacks in the past. And there really wasn't any
sensible reason to do that in the first place. So switch the 32-bit
loading to happen after paging has been enabled and turn the loader
code "real purrty" again
- Drop mixed microcode steppings loading on Intel - there, a single patch
loaded on the whole system is sufficient
- Rework late loading to track which CPUs have updated microcode
successfully and which haven't, act accordingly
- Move late microcode loading on Intel in NMI context in order to
guarantee concurrent loading on all threads
- Make the late loading CPU-hotplug-safe and have the offlined threads
be woken up for the purpose of the update
- Add support for a minimum revision which determines whether late
microcode loading is safe on a machine and the microcode does not
change software visible features which the machine cannot use anyway
since feature detection has happened already. Roughly, the minimum
revision is the smallest revision number which must be loaded
currently on the system so that late updates can be allowed
- Other nice leanups, fixess, etc all over the place
-----BEGIN PGP SIGNATURE-----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=JOZu
-----END PGP SIGNATURE-----
Merge tag 'x86_microcode_for_v6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loading updates from Borislac Petkov:
"Major microcode loader restructuring, cleanup and improvements by
Thomas Gleixner:
- Restructure the code needed for it and add a temporary initrd
mapping on 32-bit so that the loader can access the microcode
blobs. This in itself is a preparation for the next major
improvement:
- Do not load microcode on 32-bit before paging has been enabled.
Handling this has caused an endless stream of headaches, issues,
ugly code and unnecessary hacks in the past. And there really
wasn't any sensible reason to do that in the first place. So switch
the 32-bit loading to happen after paging has been enabled and turn
the loader code "real purrty" again
- Drop mixed microcode steppings loading on Intel - there, a single
patch loaded on the whole system is sufficient
- Rework late loading to track which CPUs have updated microcode
successfully and which haven't, act accordingly
- Move late microcode loading on Intel in NMI context in order to
guarantee concurrent loading on all threads
- Make the late loading CPU-hotplug-safe and have the offlined
threads be woken up for the purpose of the update
- Add support for a minimum revision which determines whether late
microcode loading is safe on a machine and the microcode does not
change software visible features which the machine cannot use
anyway since feature detection has happened already. Roughly, the
minimum revision is the smallest revision number which must be
loaded currently on the system so that late updates can be allowed
- Other nice leanups, fixess, etc all over the place"
* tag 'x86_microcode_for_v6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
x86/microcode/intel: Add a minimum required revision for late loading
x86/microcode: Prepare for minimal revision check
x86/microcode: Handle "offline" CPUs correctly
x86/apic: Provide apic_force_nmi_on_cpu()
x86/microcode: Protect against instrumentation
x86/microcode: Rendezvous and load in NMI
x86/microcode: Replace the all-in-one rendevous handler
x86/microcode: Provide new control functions
x86/microcode: Add per CPU control field
x86/microcode: Add per CPU result state
x86/microcode: Sanitize __wait_for_cpus()
x86/microcode: Clarify the late load logic
x86/microcode: Handle "nosmt" correctly
x86/microcode: Clean up mc_cpu_down_prep()
x86/microcode: Get rid of the schedule work indirection
x86/microcode: Mop up early loading leftovers
x86/microcode/amd: Use cached microcode for AP load
x86/microcode/amd: Cache builtin/initrd microcode early
x86/microcode/amd: Cache builtin microcode too
x86/microcode/amd: Use correct per CPU ucode_cpu_info
...
- Limit the hardcoded topology quirk for Hygon CPUs to those which have a
model ID less than 4. The newer models have the topology CPUID leaf 0xB
correctly implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By chance
a XEN/PV boot ends up with smp_num_siblings == 2, which makes the
hotplug control stay at its default value "enabled". So the mask is
never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core to
deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or even
non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned long
or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die
IDs. That's really not the right place simply because cpuinfo is
subject to be reinitialized when a CPU goes through an offline/online
cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
-----BEGIN PGP SIGNATURE-----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=xrz8
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Thomas Gleixner:
- Limit the hardcoded topology quirk for Hygon CPUs to those which have
a model ID less than 4.
The newer models have the topology CPUID leaf 0xB correctly
implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By
chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes
the hotplug control stay at its default value "enabled". So the mask
is never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core
to deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or
even non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned
long or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die IDs.
That's really not the right place simply because cpuinfo is subject
to be reinitialized when a CPU goes through an offline/online cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
* tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too
x86/cpu: Provide debug interface
x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids
x86/apic: Use u32 for wakeup_secondary_cpu[_64]()
x86/apic: Use u32 for [gs]et_apic_id()
x86/apic: Use u32 for phys_pkg_id()
x86/apic: Use u32 for cpu_present_to_apicid()
x86/apic: Use u32 for check_apicid_used()
x86/apic: Use u32 for APIC IDs in global data
x86/apic: Use BAD_APICID consistently
x86/cpu: Move cpu_l[l2]c_id into topology info
x86/cpu: Move logical package and die IDs into topology info
x86/cpu: Remove pointless evaluation of x86_coreid_bits
x86/cpu: Move cu_id into topology info
x86/cpu: Move cpu_core_id into topology info
hwmon: (fam15h_power) Use topology_core_id()
scsi: lpfc: Use topology_core_id()
x86/cpu: Move cpu_die_id into topology info
x86/cpu: Move phys_proc_id into topology info
x86/cpu: Encapsulate topology information in cpuinfo_x86
...
- Add new NX-stack self-test
- Improve NUMA partial-CFMWS handling
- Fix #VC handler bugs resulting in SEV-SNP boot failures
- Drop the 4MB memory size restriction on minimal NUMA nodes
- Reorganize headers a bit, in preparation to header dependency reduction efforts
- Misc cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tT5F
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm handling updates from Ingo Molnar:
- Add new NX-stack self-test
- Improve NUMA partial-CFMWS handling
- Fix #VC handler bugs resulting in SEV-SNP boot failures
- Drop the 4MB memory size restriction on minimal NUMA nodes
- Reorganize headers a bit, in preparation to header dependency
reduction efforts
- Misc cleanups & fixes
* tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Drop the 4 MB restriction on minimal NUMA node memory size
selftests/x86/lam: Zero out buffer for readlink()
x86/sev: Drop unneeded #include
x86/sev: Move sev_setup_arch() to mem_encrypt.c
x86/tdx: Replace deprecated strncpy() with strtomem_pad()
selftests/x86/mm: Add new test that userspace stack is in fact NX
x86/sev: Make boot_ghcb_page[] static
x86/boot: Move x86_cache_alignment initialization to correct spot
x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach
x86/sev-es: Allow copy_from_kernel_nofault() in earlier boot
x86_64: Show CR4.PSE on auxiliaries like on BSP
x86/iommu/docs: Update AMD IOMMU specification document URL
x86/sev/docs: Update document URL in amd-memory-encryption.rst
x86/mm: Move arch_memory_failure() and arch_is_platform_page() definitions from <asm/processor.h> to <asm/pgtable.h>
ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window
x86/numa: Introduce numa_fill_memblks()
Some variables in pcpu_hot, currently current_task and top_of_stack
are actually per-thread variables implemented as per-CPU variables
and thus stable for the duration of the respective task. There is
already an attempt to eliminate redundant reads from these variables
using this_cpu_read_stable() asm macro, which hides the dependency
on the read memory address. However, the compiler has limited ability
to eliminate asm common subexpressions, so this approach results in a
limited success.
The solution is to allow more aggressive elimination by aliasing
pcpu_hot into a const-qualified const_pcpu_hot, and to read stable
per-CPU variables from this constant copy.
The current per-CPU infrastructure does not support reads from
const-qualified variables. However, when the compiler supports segment
qualifiers, it is possible to declare the const-aliased variable in
the relevant named address space. The compiler considers access to the
variable, declared in this way, as a read from a constant location,
and will optimize reads from the variable accordingly.
By implementing constant-qualified const_pcpu_hot, the compiler can
eliminate redundant reads from the constant variables, reducing the
number of loads from current_task from 3766 to 3217 on a test build,
a -14.6% reduction.
The reduction of loads translates to the following code savings:
text data bss dec hex filename
25,477,353 4389456 808452 30675261 1d4113d vmlinux-old.o
25,476,074 4389440 808452 30673966 1d40c2e vmlinux-new.o
representing a code size reduction of -1279 bytes.
[ mingo: Updated the changelog, EXPORT(const_pcpu_hot). ]
Co-developed-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231020162004.135244-1-ubizjak@gmail.com
32-bit loads microcode before paging is enabled. The commit which
introduced that has zero justification in the changelog. The cover
letter has slightly more content, but it does not give any technical
justification either:
"The problem in current microcode loading method is that we load a
microcode way, way too late; ideally we should load it before turning
paging on. This may only be practical on 32 bits since we can't get
to 64-bit mode without paging on, but we should still do it as early
as at all possible."
Handwaving word salad with zero technical content.
Someone claimed in an offlist conversation that this is required for
curing the ATOM erratum AAE44/AAF40/AAG38/AAH41. That erratum requires
an microcode update in order to make the usage of PSE safe. But during
early boot, PSE is completely irrelevant and it is evaluated way later.
Neither is it relevant for the AP on single core HT enabled CPUs as the
microcode loading on the AP is not doing anything.
On dual core CPUs there is a theoretical problem if a split of an
executable large page between enabling paging including PSE and loading
the microcode happens. But that's only theoretical, it's practically
irrelevant because the affected dual core CPUs are 64bit enabled and
therefore have paging and PSE enabled before loading the microcode on
the second core. So why would it work on 64-bit but not on 32-bit?
The erratum:
"AAG38 Code Fetch May Occur to Incorrect Address After a Large Page is
Split Into 4-Kbyte Pages
Problem: If software clears the PS (page size) bit in a present PDE
(page directory entry), that will cause linear addresses mapped through
this PDE to use 4-KByte pages instead of using a large page after old
TLB entries are invalidated. Due to this erratum, if a code fetch uses
this PDE before the TLB entry for the large page is invalidated then it
may fetch from a different physical address than specified by either the
old large page translation or the new 4-KByte page translation. This
erratum may also cause speculative code fetches from incorrect addresses."
The practical relevance for this is exactly zero because there is no
splitting of large text pages during early boot-time, i.e. between paging
enable and microcode loading, and neither during CPU hotplug.
IOW, this load microcode before paging enable is yet another voodoo
programming solution in search of a problem. What's worse is that it causes
at least two serious problems:
1) When stackprotector is enabled, the microcode loader code has the
stackprotector mechanics enabled. The read from the per CPU variable
__stack_chk_guard is always accessing the virtual address either
directly on UP or via %fs on SMP. In physical address mode this
results in an access to memory above 3GB. So this works by chance as
the hardware returns the same value when there is no RAM at this
physical address. When there is RAM populated above 3G then the read
is by chance the same as nothing changes that memory during the very
early boot stage. That's not necessarily true during runtime CPU
hotplug.
2) When function tracing is enabled, the relevant microcode loader
functions and the functions invoked from there will call into the
tracing code and evaluate global and per CPU variables in physical
address mode. What could potentially go wrong?
Cure this and move the microcode loading after the early paging enable, use
the new temporary initrd mapping and remove the gunk in the microcode
loader which is required to handle physical address mode.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211722.348298216@linutronix.de
