commit bff7d13c19 ("cpufreq: amd-pstate: add debug message while
CPPC is supported and disabled by SBIOS") issues a warning on plaforms
where the X86_FEATURE_CPPC is expected to be enabled, but is not due
to it being disabled in the BIOS.
This feature bit corresponds to CPUID 0x80000008.ebx[27] which is a
reserved bit on the Zen1 processors and a reserved bit on Zen2 based
models 0x70-0x7F, and is expected to be cleared on these
platforms. Thus printing the warning message for these models when
X86_FEATURE_CPPC is unavailable is incorrect. Fix this.
Modify some of the comments, and use switch-case for model range
checking for improved readability while at it.
Fixes: bff7d13c19 ("cpufreq: amd-pstate: add debug message while CPPC is supported and disabled by SBIOS")
Cc: Xiaojian Du <xiaojian.du@amd.com>
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/lkml/20240730140111.4491-1-00107082@163.com/
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
After the commit 63edbaa48a ("x86/cpu/topology: Add support for the
AMD 0x80000026 leaf"), the topolgy_logical_die_id() function returns
the logical Core Chiplet Die (CCD) ID instead of the logical socket
ID.
Since this is currently used to set MSR_AMD_CPPC_ENABLE, which needs
to be set on any one of the threads of the socket, it is prudent to
use topology_logical_package_id() in place of
topology_logical_die_id().
Fixes: 63edbaa48a ("x86/cpu/topology: Add support for the AMD 0x80000026 leaf")
cc: stable@vger.kernel.org # 6.10
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Link: https://lore.kernel.org/lkml/20240801124509.3650-1-Dhananjay.Ugwekar@amd.com/
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Smatch complains that "ret" could be uninitialized:
drivers/cpufreq/amd-pstate.c:734 amd_pstate_cpu_boost_update()
error: uninitialized symbol 'ret'.
This seems like it probably is a real issue. Initialize "ret" to zero to
be safe.
Fixes: c8c68c38b5 ("cpufreq: amd-pstate: initialize core precision boost state")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/lkml/7ff53543-6c04-48a0-8d99-7dc010b93b3a@stanley.mountain/T/
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
The cpufreq core doesn't check the return type of the exit() callback
and there is not much the core can do on failures at that point. Just
drop the returned value and make it return void.
Signed-off-by: Lizhe <sensor1010@163.com>
[ Viresh: Reworked the patches to fix all missing changes together. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # Mediatek
Acked-by: Sudeep Holla <sudeep.holla@arm.com> # scpi, scmi, vexpress
Acked-by: Mario Limonciello <mario.limonciello@amd.com> # amd
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # bmips
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com> # omap
On shared memory CPPC systems, with amd_pstate=active mode, the change
in scaling_max_freq doesn't get written to the shared memory
region. Due to this, the writes to the scaling_max_freq sysfs file
don't take effect. Fix this by propagating the scaling_max_freq
changes to the shared memory region.
Fixes: ffa5096a7c ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Reported-by: David Arcari <darcari@redhat.com>
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240702081413.5688-3-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
When Core Performance Boost is disabled by the user, the
CPPC_REQ.max_perf should not exceed the nominal_perf since by definition
the frequencies between nominal_perf and the highest_perf are in the
boost range. Fix this in amd_pstate_update()
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Link: https://lore.kernel.org/r/66f55232be01092c423f0523f68b82b80c293943.1718988436.git.perry.yuan@amd.com
Link: https://lore.kernel.org/r/20240626042733.3747-4-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
The "Core Performance Boost (CPB) feature, when enabled in the BIOS,
allows the OS to control the highest performance for each individual
core. The active, passive and the guided modes of the amd-pstate driver
do support controlling the core frequency boost when this BIOS feature
is enabled. Additionally, the amd-pstate driver provides a sysfs
interface allowing the user to activate/deactivate this core performance
boost feature at runtime.
Add support for the set_boost callback in the active mode driver to
enable boost control via the cpufreq core. This ensures a consistent
boost control interface across all pstate modes, including passive
mode, guided mode, and active mode.
With this addition, all three pstate modes can support the same boost
control interface with unique interface and global CPB control. Each
CPU also supports individual boost control, allowing global CPB to
change all cores' boost states simultaneously. Specific CPUs can
update their boost states separately, ensuring all cores' boost
states are synchronized.
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20240626042733.3747-3-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
If driver registration fails then immediately return the failure
instead of continuing to register attributes.
This fixes issues of falling back from amd-pstate to other drivers
when cpufreq init has failed for any reason.
Reported-by: alex.s.cochran@proton.me
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Link: https://lore.kernel.org/r/20240623200918.52104-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
When scaling min/max freq values were being setted,
the value of policy->cur need to update.
Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240227071133.3405003-1-li.meng@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
If the `amd-pstate` driver is not loaded automatically by default,
it is because the kernel command line parameter has not been added.
To resolve this issue, it is necessary to call the `amd_pstate_set_driver()`
function to enable the desired mode (passive/active/guided) before registering
the driver instance.
This ensures that the driver is loaded correctly without relying on the kernel
command line parameter.
When there is no parameter added to command line, Kernel config will
provide the default mode to load.
Meanwhile, user can add driver mode in command line which will override
the kernel config default option.
Reported-by: Andrei Amuraritei <andamu@posteo.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218705
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/83301c4cea4f92fb19e14b23f2bac7facfd8bdbb.1718811234.git.perry.yuan@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
The amd-pstate-epp driver has been implemented and resolves the
performance drop issue seen in passive mode for shared memory type
CPPC systems. Users who enable the active mode driver will not
experience a performance drop compared to the passive mode driver.
Therefore, the EPP driver should be loaded by default for shared
memory type CPPC system to get better performance.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/c705507cf3ee790e544251cfd897ed11e8e57712.1718811234.git.perry.yuan@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
replace the usage of the deprecated boot_cpu_has() function with
the modern cpu_feature_enabled() function. The switch to cpu_feature_enabled()
ensures compatibility with the latest CPU feature detection mechanisms and
improves code maintainability.
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/f1567593ac5e1d38343067e9c681a8c4b0707038.1718811234.git.perry.yuan@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
If CPPC feature is supported by the CPU however the CPUID flag bit is not
set by SBIOS, the `amd_pstate` will be failed to load while system
booting.
So adding one more debug message to inform user to check the SBIOS setting,
The change also can help maintainers to debug why amd_pstate driver failed
to be loaded at system booting if the processor support CPPC.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218686
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/42c953616ac121bd1e5c329e83d015a02e6b32c7.1718811234.git.perry.yuan@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
To enhance the debugging capability of the driver loading failure for
broken CPPC ACPI tables, it can optimize the expression by moving the
verification of `min_freq`, `nominal_freq`, and other dependency values
to the `amd_pstate_init_freq()` function where they are initialized.
If any of these values are incorrect, the `amd-pstate` driver will not be registered.
By ensuring that these values are correct before they are used, it will facilitate
the debugging process when encountering driver loading failures due to faulty CPPC
ACPI tables from BIOS
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/f9793f8451c1832e34cc9dc35f89c653b39cfe38.1718811234.git.perry.yuan@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
The EPP string for 'default' represents what the firmware had configured
as the default EPP value but once a user changes EPP to another string
they can't reset it back to 'default'.
Cache the firmware EPP value and allow the user to write 'default' using
this value.
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931#c61
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
The nominal frequency in cpudata is maintained in MHz whereas all other
frequencies are in KHz. This means we have to convert nominal frequency
value to KHz before we do any interaction with other frequency values.
In amd_pstate_set_boost(), this conversion from MHz to KHz is missed,
fix that.
Tested on a AMD Zen4 EPYC server
Before:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151
409422
After:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151000
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151000
1799527
Fixes: ec437d71db ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Peter Jung <ptr1337@cachyos.org>
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When extra warnings are enabled, gcc points out a global variable
definition in a header:
In file included from drivers/cpufreq/amd-pstate-ut.c:29:
include/linux/amd-pstate.h:123:27: error: 'amd_pstate_mode_string' defined but not used [-Werror=unused-const-variable=]
123 | static const char * const amd_pstate_mode_string[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
This header is only included from two files in the same directory,
and one of them uses only a single definition from it, so clean it
up by moving most of the contents into the driver that uses them,
and making shared bits a local header file.
Fixes: 36c5014e54 ("cpufreq: amd-pstate: optimize driver working mode selection in amd_pstate_param()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpudata memory from kzalloc() in amd_pstate_epp_cpu_init() is
not freed in the analogous exit function, so fix that.
Signed-off-by: Peng Ma <andypma@tencent.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To address the performance drop issue, an optimization has been
implemented. The incorrect highest performance value previously set by the
low-level power firmware for AMD CPUs with Family ID 0x19 and Model ID
ranging from 0x70 to 0x7F series has been identified as the cause.
To resolve this, a check has been implemented to accurately determine the
CPU family and model ID. The correct highest performance value is now set
and the performance drop caused by the incorrect highest performance value
are eliminated.
Before the fix, the highest frequency was set to 4200MHz, now it is set
to 4971MHz which is correct.
CPU NODE SOCKET CORE L1d:L1i:L2:L3 ONLINE MAXMHZ MINMHZ MHZ
0 0 0 0 0:0:0:0 yes 4971.0000 400.0000 400.0000
1 0 0 0 0:0:0:0 yes 4971.0000 400.0000 400.0000
2 0 0 1 1:1:1:0 yes 4971.0000 400.0000 4865.8140
3 0 0 1 1:1:1:0 yes 4971.0000 400.0000 400.0000
Fixes: f3a0523918 ("cpufreq: amd-pstate: Enable amd-pstate preferred core support")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218759
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Gaha Bana <gahabana@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
removed the unused variable `lowest_nonlinear_freq` for build warning.
This variable was defined and assigned a value in the previous code,
but it was not used in the subsequent code.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404271038.em6nJjzy-lkp@intel.com/
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
get some code format problems fixed in the amd-pstate driver.
Changes Made:
- Fixed incorrect comment format in the functions.
- Removed unnecessary blank line.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404271148.HK9yHBlB-lkp@intel.com/
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add quirks table to get CPPC capabilities issue fixed by providing
correct perf or frequency values while driver loading.
If CPPC capabilities are not defined in the ACPI tables or wrongly
defined by platform firmware, it needs to use quick to get those
issues fixed with correct workaround values to make pstate driver
can be loaded even though there are CPPC capabilities errors.
The workaround will match the broken BIOS which lack of CPPC capabilities
nominal_freq and lowest_freq definition in the ACPI table.
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/lowest_freq
0
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/nominal_freq
0
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make pstate driver initially retrieve the P-state transition delay and
latency values from the BIOS ACPI tables which has more reasonable
delay and latency values according to the platform design and
requirements.
Previously there values were hardcoded at specific value which may
have conflicted with platform and it might not reflect the most
accurate or optimized setting for the processor.
[054h 0084 8] Preserve Mask : FFFFFFFF00000000
[05Ch 0092 8] Write Mask : 0000000000000001
[064h 0100 4] Command Latency : 00000FA0
[068h 0104 4] Maximum Access Rate : 0000EA60
[06Ch 0108 2] Minimum Turnaround Time : 0000
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The amd-pstate driver cannot work when the min_freq, nominal_freq or
the max_freq is zero. When this happens it is prudent to error out
early on rather than waiting failing at the time of the governor
initialization.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
amd_get_{min,max,nominal,lowest_nonlinear}_freq() functions merely
return cpudata->{min,max,nominal,lowest_nonlinear}_freq values.
There is no loss in readability in replacing their invocations by
accesses to the corresponding members of cpudata.
Do so and remove these helper functions.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Li Meng <li.meng@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently the amd_get_{min, max, nominal, lowest_nonlinear}_freq()
helpers computes the values of min_freq, max_freq, nominal_freq and
lowest_nominal_freq respectively afresh from
cppc_get_perf_caps(). This is not necessary as there are fields in
cpudata to cache these values.
To simplify this, add a single helper function named
amd_pstate_init_freq() which computes all these frequencies at once, and
caches it in cpudata.
Use the cached values everywhere else in the code.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Li Meng <li.meng@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Co-developed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The min/max limit perf values calculated based on frequency
may exceed the reasonable range of perf(highest perf, lowest perf).
Signed-off-by: Meng Li <li.meng@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the function amd_pstate_adjust_perf(), the 'min_perf' variable is set
to 'highest_perf' instead of 'lowest_perf'.
Fixes: 1d215f0319 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Tor Vic <torvic9@mailbox.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Preferred core rankings can be changed dynamically by the
platform based on the workload and platform conditions and
accounting for thermals and aging.
When this occurs, cpu priority need to be set.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Meng Li <li.meng@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
amd-pstate driver utilizes the functions and data structures
provided by the ITMT architecture to enable the scheduler to
favor scheduling on cores which can be get a higher frequency
with lower voltage. We call it amd-pstate preferrred core.
Here sched_set_itmt_core_prio() is called to set priorities and
sched_set_itmt_support() is called to enable ITMT feature.
amd-pstate driver uses the highest performance value to indicate
the priority of CPU. The higher value has a higher priority.
The initial core rankings are set up by amd-pstate when the
system boots.
Add a variable hw_prefcore in cpudata structure. It will check
if the processor and power firmware support preferred core
feature.
Add one new early parameter `disable` to allow user to disable
the preferred core.
Only when hardware supports preferred core and user set `enabled`
in early parameter, amd pstate driver supports preferred core featue.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Meng Li <li.meng@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Scaling min/max freq values were being cached and lagging a setting
each time. Fix the ordering of the clamp call to ensure they work.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931
Fixes: febab20cae ("cpufreq/amd-pstate: Fix scaling_min_freq and scaling_max_freq update")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wyes Karny <wkarny@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When amd_pstate is running, writing to scaling_min_freq and
scaling_max_freq has no effect. These values are only passed to the
policy level, but not to the platform level. This means that the
platform does not know about the frequency limits set by the user.
To fix this, update the min_perf and max_perf values at the platform
level whenever the user changes the scaling_min_freq and scaling_max_freq
values.
Fixes: ffa5096a7c ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq_driver->fast_switch() callback expects a frequency as a return
value. amd_pstate_fast_switch() was returning the return value of
amd_pstate_update_freq(), which only indicates a success or failure.
Fix this by making amd_pstate_fast_switch() return the target_freq
when the call to amd_pstate_update_freq() is successful, and return
the current frequency from policy->cur when the call to
amd_pstate_update_freq() is unsuccessful.
Fixes: 4badf2eb1e ("cpufreq: amd-pstate: Add ->fast_switch() callback")
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Cc: 6.4+ <stable@vger.kernel.org> # v6.4+
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In commit 3666062b87 ("cpufreq: amd-pstate: move to use bus_get_dev_root()")
the "amd_pstate" attributes where moved from a dedicated kobject to the
cpu root kobject.
While the dedicated kobject expects to contain kobj_attributes the root
kobject needs device_attributes.
As the changed arguments are not used by the callbacks it works most of
the time.
However CFI will detect this issue:
[ 4947.849350] CFI failure at dev_attr_show+0x24/0x60 (target: show_status+0x0/0x70; expected type: 0x8651b1de)
...
[ 4947.849409] Call Trace:
[ 4947.849410] <TASK>
[ 4947.849411] ? __warn+0xcf/0x1c0
[ 4947.849414] ? dev_attr_show+0x24/0x60
[ 4947.849415] ? report_cfi_failure+0x4e/0x60
[ 4947.849417] ? handle_cfi_failure+0x14c/0x1d0
[ 4947.849419] ? __cfi_show_status+0x10/0x10
[ 4947.849420] ? handle_bug+0x4f/0x90
[ 4947.849421] ? exc_invalid_op+0x1a/0x60
[ 4947.849422] ? asm_exc_invalid_op+0x1a/0x20
[ 4947.849424] ? __cfi_show_status+0x10/0x10
[ 4947.849425] ? dev_attr_show+0x24/0x60
[ 4947.849426] sysfs_kf_seq_show+0xa6/0x110
[ 4947.849433] seq_read_iter+0x16c/0x4b0
[ 4947.849436] vfs_read+0x272/0x2d0
[ 4947.849438] ksys_read+0x72/0xe0
[ 4947.849439] do_syscall_64+0x76/0xb0
[ 4947.849440] ? do_user_addr_fault+0x252/0x650
[ 4947.849442] ? exc_page_fault+0x7a/0x1b0
[ 4947.849443] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fixes: 3666062b87 ("cpufreq: amd-pstate: move to use bus_get_dev_root()")
Reported-by: Jannik Glückert <jannik.glueckert@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217765
Link: https://lore.kernel.org/lkml/c7f1bf9b-b183-bf6e-1cbb-d43f72494083@gmail.com/
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Users are having more success with amd-pstate since the introduction
of EPP and Guided modes. To expose the driver to more users by default
introduce a kernel configuration option for setting the default mode.
Users can use an integer to map out which default mode they want to use
in lieu of a kernel command line option.
This will default to EPP, but only if:
1) The CPU supports an MSR.
2) The system profile is identified
3) The system profile is identified as a non-server by the FADT.
Link: https://gitlab.freedesktop.org/hadess/power-profiles-daemon/-/merge_requests/121
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Co-developed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If a user's configuration doesn't explicitly specify the cpufreq
scaling governor then the code currently explicitly falls back to
'powersave'. This default is fine for notebooks and desktops, but
servers and undefined machines should default to 'performance'.
Look at the 'preferred_profile' field from the FADT to set this
policy accordingly.
Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html#fixed-acpi-description-table-fadt
Acked-by: Huang Rui <ray.huang@amd.com>
Suggested-by: Wyes Karny <Wyes.Karny@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
amd-pstate passive mode driver is hyphenated. So make amd-pstate active
mode driver consistent with that rename "amd_pstate_epp" to
"amd-pstate-epp".
Fixes: ffa5096a7c ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently amd_pstate sets CPPC enable bit in MSR_AMD_CPPC_ENABLE only
for the CPU where the module_init happened. But MSR_AMD_CPPC_ENABLE is
per-socket. This causes CPPC enable bit to set for only one socket for
servers with more than one physical packages. To fix this write
MSR_AMD_CPPC_ENABLE per-socket.
Also, handle duplicate calls for cppc_enable, because it's called from
per-policy/per-core callbacks and can result in duplicate MSR writes.
Before the fix:
amd@amd:~$ sudo rdmsr -a 0xc00102b1 | uniq --count
192 0
192 1
After the fix:
amd@amd:~$ sudo rdmsr -a 0xc00102b1 | uniq --count
384 1
Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Driver should update policy->cur after updating the frequency.
Currently amd_pstate doesn't update policy->cur when `adjust_perf`
is used. Which causes /proc/cpuinfo to show wrong cpu frequency.
Fix this by updating policy->cur with correct frequency value in
adjust_perf function callback.
- Before the fix: (setting min freq to 1.5 MHz)
[root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count
1 cpu MHz : 1777.016
1 cpu MHz : 1797.160
1 cpu MHz : 1797.270
189 cpu MHz : 400.000
- After the fix: (setting min freq to 1.5 MHz)
[root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count
1 cpu MHz : 1753.353
1 cpu MHz : 1756.838
1 cpu MHz : 1776.466
1 cpu MHz : 1776.873
1 cpu MHz : 1777.308
1 cpu MHz : 1779.900
183 cpu MHz : 1805.231
1 cpu MHz : 1956.815
1 cpu MHz : 2246.203
1 cpu MHz : 2259.984
Fixes: 1d215f0319 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
[ rjw: Subject edits ]
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
amd_pstate active mode driver is only compatible with static governors.
Therefore it doesn't need fast_switch functionality. Remove
fast_switch_possible flag from amd_pstate active mode driver.
Fixes: ffa5096a7c ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Schedutil normally calls the adjust_perf callback for drivers with
adjust_perf callback available and fast_switch_possible flag set.
However, when frequency invariance is disabled and schedutil tries to
invoke fast_switch. So, there is a chance of kernel crash if this
function pointer is not set. To protect against this scenario add
fast_switch callback to amd_pstate driver.
Fixes: 1d215f0319 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
smatch reports
drivers/cpufreq/amd-pstate.c:907:25: warning: symbol
'mode_state_machine' was not declared. Should it be static?
This variable is only used in one file so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
amd_pstate driver's `status` sysfs entry helps to control the driver's
mode dynamically by user. After the addition of guided mode the
combinations of mode transitions have been increased (16 combinations).
Therefore optimise the amd_pstate_update_status function by implementing
a state transition table.
There are 4 states amd_pstate supports, namely: 'disable', 'passive',
'active', and 'guided'. The transition from any state to any other
state is possible after this change.
Sysfs interface:
To disable amd_pstate driver:
# echo disable > /sys/devices/system/cpu/amd_pstate/status
To enable passive mode:
# echo passive > /sys/devices/system/cpu/amd_pstate/status
To change mode to active:
# echo active > /sys/devices/system/cpu/amd_pstate/status
To change mode to guided:
# echo guided > /sys/devices/system/cpu/amd_pstate/status
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
From ACPI spec below 3 modes for CPPC can be defined:
1. Non autonomous: OS scaling governor specifies operating frequency/
performance level through `Desired Performance` register and platform
follows that.
2. Guided autonomous: OS scaling governor specifies min and max
frequencies/ performance levels through `Minimum Performance` and
`Maximum Performance` register, and platform can autonomously select an
operating frequency in this range.
3. Fully autonomous: OS only hints (via EPP) to platform for the required
energy performance preference for the workload and platform autonomously
scales the frequency.
Currently (1) is supported by amd_pstate as passive mode, and (3) is
implemented by EPP support. This change is to support (2).
In guided autonomous mode the min_perf is based on the input from the
scaling governor. For example, in case of schedutil this value depends
on the current utilization. And max_perf is set to max capacity.
To activate guided auto mode ``amd_pstate=guided`` command line
parameter has to be passed in the kernel.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
