Ast's BMC connector tracks the status of an underlying physical
connector and updates the BMC status accordingly. This functionality
works around GNOME's settings app, which cannot handle multiple
outputs on the same CRTC.
The workaround is now obsolete as all code for physical outputs
handle BMC support internally. Hence, remove the driver's code and
the BMC output entirely.
v3:
- remove struct ast_bmc_connector
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-12-tzimmermann@suse.de
Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.
v3:
- use struct ast_connector.physical_status to handle BMC
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-11-tzimmermann@suse.de
Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.
v3:
- use struct ast_connector.physical_status to handle BMC
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-10-tzimmermann@suse.de
Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.
v3:
- use struct ast_connector.physical_status to handle BMC
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-9-tzimmermann@suse.de
Convert DP501 support to struct drm_edid and its helpers. Simplifies
and modernizes the EDID handling.
The driver reads 4 bytes at once, but the overall read length is now
variable. Therefore update the EDID read loop to never return more than
the requested bytes.
v2:
- fix reading EDID data
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-8-tzimmermann@suse.de
Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.
v3:
- use struct ast_connector.physical_status to handle BMC
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-7-tzimmermann@suse.de
Remove the CRTC handling in the ASTDP detect_ctx helper and enable
power while the detecting the display. Unconditionally wait a few
milliseconds after switching power. Simplifies the code and makes it
more robust.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-6-tzimmermann@suse.de
Convert ASTDP support to struct drm_edid and its helpers. Simplifies
and modernizes the EDID handling.
The driver reads 4 bytes at once, but the overall read length is now
variable. Therefore update the EDID read loop to never return more than
the requested bytes.
The device does not seem to support EDID extensions, as the driver
actively clears any such information from the main EDID header. As
the new interface allows for reading extension blocks for EDID, make
sure that the block is always 0 (i.e., the main header). A later
update might fix that.
v2:
- fix reading if len is not a multiple of 4
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-5-tzimmermann@suse.de
The modeset mutex protects EDID retrival from concurrent modeset
operations. Acquire the lock in ast_astdp_read_edid(). Prepares the
code for conversion to struct drm_edid.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-4-tzimmermann@suse.de
Add struct ast_connector to track a connector's physical status. With
the upcoming BMC support, the physical status can be different from the
reported status.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-3-tzimmermann@suse.de
This code has an issue because it loops until "i" is set to UINT_MAX but
the test for failure assumes that "i" is set to zero. The result is that
it will only print an error message if we succeed on the very last try.
Reformat the loop to count forwards instead of backwards.
Fixes: 2281475168 ("drm/ast: astdp: Perform link training during atomic_enable")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1ba8da25-2d09-4924-a4ff-c0714bfbb192@stanley.mountain
The place for link training is in the encoder's atomic_enable
helper. Remove all related tests from other helper ASTDP functions;
especially ast_astdp_is_connected(), which tests HPD status.
DP link training is controlled by the firmware. A status flag reports
success or failure. The process can be fragile on Aspeed hardware. Moving
the test from connector detection to the atomic_enable allows for several
retries and a longer timeout.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-5-tzimmermann@suse.de
The overall control flow of the driver ensures that it never reads
EDID or sets display state on unconnected outputs. Therefore remove
all tests for Hot Plug Detection from these helpers. Also rename
the register constants.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-4-tzimmermann@suse.de
Test for running ASTDP firmware during probe. Do not bother testing
this later. We cannot do much anyway if the firmware fails. Do not
initialize the ASTDP conenctor if the test fails during device probing.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Shixiong Ou <oushixiong@kylinos.cn>
Tested-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-3-tzimmermann@suse.de
Power up the ASTDP connector for connection status detection if the
connector is not active. Keep it powered if a display is attached.
This fixes a bug where the connector does not come back after
disconnecting the display. The encoder's atomic_disable turns off
power on the physical connector. Further HPD reads will fail,
thus preventing the driver from detecting re-connected displays.
For connectors that are actively used, only test the HPD flag without
touching power.
Fixes: f81bb0ac78 ("drm/ast: report connection status on Display Port.")
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.6+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-2-tzimmermann@suse.de
Ast has no special requirements for runtime power management. So
replace drm_atomic_helper_commit_tail_rpm() with the regular helper
drm_atomic_helper_commit_tail().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-9-tzimmermann@suse.de
The function ast_crtc_dpms() is left over from when the ast driver
did not implement atomic modesetting. But DPMS is not supported by
atomic modesetting and the helper is only called to enable or
disable the CRTC sync pulses. Inline the function into its callers.
To disable the CRTC, ast sets (AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF)
in VGACRB6. Replace the constants with the correct register constants
for VGACRB6.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-8-tzimmermann@suse.de
The SCREEN_DISABLE bit controls scanout from display memory. The bit
affects all planes, so set it only in the CRTC's atomic enable and
disable functions.
A number of bugs affect this fix. First of all, ast_set_std_regs()
tries to set VGASR1 except for the SD bit. But the read bitmask is
invert, so it preserves anything except the SD bit. Fix this by
re-inverting the read mask.
The second issue is that primary-plane and CRTC helpers modify the
SD bit. The bit controls scanout for all planes, primary and HW
cursor, so set it only in the CRTC code.
Further add a constant to represent the SD bit in VGASR1. Keep the
plane's atomic_disable around to make the DRM framework happy.
v2:
- fix typos in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-7-tzimmermann@suse.de
The DPMS code, called from the CRTC's atomic_enable, rewrites the
gamma LUT. This is already done by the CRTC's atomic_flush. Remove
the duplication.
v2:
- fix a typo in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-6-tzimmermann@suse.de
Several color registers are programmed in the DPMS code of the CRTC's
atomic_enable helper and the primary plane's atomic_update. It requires
the color format and the display mode.
Both code paths handle different cases: the DPMS's code will not be
executed if the color format changes without a full mode switch. The
plane's code only runs if the color format changes, but ignores
display-mode changes.
The color format is a property of the primary plane, so consolidate all
color-format code in the plane's atomic_update. Remove it from the DPMS
helper.
v2:
- clarify commit message (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-5-tzimmermann@suse.de
Do all mode setting in ast_crtc_helper_mode_set_nofb(), which
always runs after disabling the CRTC and before programming the
planes. Removes implicit synchronization between the CRTC's
atomic disable, enable and the vertical retrace.
Display-mode updates require HW cursors to be disabled. The HW
cursor only picks up changes at vertical retrace periods. So the
CRTC's atomic_disable helper waited for the retrace to delay any
following mode-setting operations, which then happened in
atomic_enable. See [1] for a description of the problem.
With the CRTC helper callback mode_set_nofb, we can now synchronize
and reprogram in the same place. As it always runs before the plane
update, the plane code can be reordered with the CRTC's later
atomic_enable et al.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/series/79914/ # 1
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-4-tzimmermann@suse.de
The CRTC's atomic_flush function contains code to program the
display mode to the AST DP chip. Move the code to the encoder's
atomic_mode_set callback. The DRM atomic-modesetting code invoke
this callback as part of the atomic commit.
v2:
- fix typos in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-3-tzimmermann@suse.de
The CRTC helpers contain code to enable and disable DisplayPort
connectors. Implement this functionality in the respective connector's
atomic_enable/atomic_disable callbacks. DRM's atomic-modesetting
helpers will call the functions as part of the atomic commit.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-2-tzimmermann@suse.de
The function drm_simple_encoder_init() is a trivial helper and
deprecated. Replace it with the regular call to drm_encoder_init().
Resolves the dependency on drm_simple_kms_helper.h. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625131815.14514-1-tzimmermann@suse.de
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmYlapoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGJLgH/RFrsXefpxAWACJv
wRmIx/YFjI3Z4nypBZPXysX/JOuf/cf4bR22jMHC1vhQDtxVgB7eUpEYx0C0Y5RD
ll7cunAZCpP+PB725/bOWbaF94eigl8xC4RrKPon4tG1CS9NAvCJFDyNgWpqh48s
sSKKae68a16zMtIX5Za8nvmsBQOeD67ZFBgI4m7wIDDhTXY3XlG84r8Rz/ZwcdE/
rExFkDMUqjpoJVAMBtETQNk4pvKZVMrW2B0f/xZSR+IKXw5l2FO0raXkIG/6TERs
CxJvCuUjKIosqFLIK2O/cU9G+5V2axZ/WD8YRwDr2vlnnOPht+dFQzyPcuSqezbG
ShIhQo8=
=GI5F
-----END PGP SIGNATURE-----
Backmerge tag 'v6.9-rc5' into drm-next
Linux 6.9-rc5
I've had a persistent msm failure on clang, and the fix is in fixes
so just pull it back to fix that.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add support for the drm_panic module, which displays a message to
the screen when a kernel panic occurs.
v7
* Use drm_for_each_primary_visible_plane()
v8:
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
(Thomas Zimmermann)
v9:
* Revert to using get_scanout_buffer() (Sima)
* move get_scanout_buffer() to plane helper functions
v12:
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-10-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move the definition of struct ast_ddc to ast_ddc.c and return the i2c
adapter from ast_ddc_create(). Update callers accordingly. Avoids
including Linux i2c header files, except where required. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240403103325.30457-4-tzimmermann@suse.de
Reorder the code to set up the DDC channel by data structure, so
that each data structure's init is in a separate block: first the
bit algo then the i2c adapter. Makes the code more readable. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240403103325.30457-3-tzimmermann@suse.de
Compute the i2c timeout in jiffies from a value in milliseconds. The
original values of 2 jiffies equals 2 milliseconds if HZ has been
configured to a value of 1000. This corresponds to 2.2 milliseconds
used by most other DRM drivers. Update ast accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 312fec1405 ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.5+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240403103325.30457-2-tzimmermann@suse.de
There is a while-loop in ast_dp_set_on_off() that could lead to
infinite-loop. This is because the register, VGACRI-Dx, checked in
this API is a scratch register actually controlled by a MCU, named
DPMCU, in BMC.
These scratch registers are protected by scu-lock. If suc-lock is not
off, DPMCU can not update these registers and then host will have soft
lockup due to never updated status.
DPMCU is used to control DP and relative registers to handshake with
host's VGA driver. Even the most time-consuming task, DP's link
training, is less than 100ms. 200ms should be enough.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Fixes: 594e9c04b5 ("drm/ast: Create the driver for ASPEED proprietory Display-Port")
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.19+
Link: https://patchwork.freedesktop.org/patch/msgid/20240403090246.1495487-1-jammy_huang@aspeedtech.com
Automatically clean up the conncetor-poll thread as part of the DRM
device release. The new helper drmm_kms_helper_poll_init() provides
a shared implementation for all drivers.
v6:
- fix kernel doc comment (Sui, kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-14-tzimmermann@suse.de
Implement polling for VGA and SIL164 connectors. Set the flag
DRM_CONNECTOR_POLL_DISCONNECT for each to detect the removal of the
monitor cable. Implement struct drm_connector_helper_funcs.detect_ctx
for each type of connector by testing for EDID data.
The helper drm_connector_helper_detect_ctx() implements .detect_ctx()
on top of the connector's DDC channel. The function can be used by
other drivers as companion to drm_connector_helper_get_modes().
v6:
- change helper name to drm_connector_helper_detec_from_ddc()
(Maxime, Sui)
v5:
- share implementation in drm_connector_helper_detect_ctx() (Maxime)
- test for DDC presence with drm_probe_ddc() (Maxime, Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-13-tzimmermann@suse.de
The .get_modes() code for VGA and SIL164 connectors does not depend
on either type of connector. Replace the driver code with the common
helper drm_connector_helper_get_modes(). It reads EDID data via
DDC and updates the connector's EDID property.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-12-tzimmermann@suse.de
The modeset lock protects the DDC code from concurrent modeset
operations, which use the same registers. Move that code from the
connector helpers into the DDC helpers .pre_xfer() and .post_xfer().
Both, .pre_xfer() and .post_xfer(), enclose the transfer of data blocks
over the I2C channel in the internal I2C function bit_xfer(). Both
calls are executed unconditionally if present. Invoking DDC transfers
from any where within the driver now takes the lock.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-11-tzimmermann@suse.de
Align the names of the algo-bit helpers with ast's convention of
using an ast prefix plus the struct's name plus the callback's name
for such function symbols. Change the parameter names of these
helpers to 'data' and 'state', as used in the declaration of struct
i2c_algo_bit_data. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-10-tzimmermann@suse.de
The DDC code needs the AST device. Store a pointer in struct ast_ddc
and avoid internal upcasts. Improves type safety within the DDC code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-9-tzimmermann@suse.de
The DDC code needs the AST device. Pass it to ast_ddc_create() and
avoid an internal upcast. Improves type safety within the DDC code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-8-tzimmermann@suse.de
The struct struct ast_i2c_chan represents the Display Data Channel
(DDC); I2C is the underlying bus. Rename the structure, the variables
and the helper ast_i2c_create() to ddc-like terms. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-7-tzimmermann@suse.de
Rename ast_i2c.c to ast_ddc.c and move its interface into the
new header ast_ddc.h. Update all include statements as necessary
and change the adapter name to 'AST DDC bus'.
This avoids including I2C headers in the driver's main header file,
which doesn't need them. Renaming files to _ddc indicates that the
code is about the DDC. I2C is really just the underlying bus here.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-6-tzimmermann@suse.de
Replace kzalloc() with drmm_kzalloc() and thereby put the release of
the I2C instance into a separate action. Avoids explicit error roll-
back in ast_i2c_chan_create(). No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-5-tzimmermann@suse.de
Expect the hardware to provide a DDC channel. Fail probing if its
initialization fails. Failing to initialize the DDC indicates a
larger problem, so there's no point in continuing.
v4:
* give a rational in the commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-3-tzimmermann@suse.de
Include <linux/of.h> to get of_property_read_u32() in the source
files that need it. Avoids the proxy include via <linux/i2c.h>.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-2-tzimmermann@suse.de
(controllers set the flag, but there is no client to use it). Also,
CLASS_SPD support gets simplified to prepare removal in the future.
Class based instantiation is not recommended these days anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it. Then, there are also
quite some driver updates. Standing out are patches for the wmt-driver
which is refactored to support more variants. This is the rebased pull
request where a large series for the designware driver was dropped.
-----BEGIN PGP SIGNATURE-----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=8D3Q
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This removes the currently unused CLASS_DDC support (controllers set
the flag, but there is no client to use it).
Also, CLASS_SPD support gets simplified to prepare removal in the
future. Class based instantiation is not recommended these days
anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it.
Finally, quite some driver updates. Standing out are patches for the
wmt-driver which is refactored to support more variants.
This is the rebased pull request where a large series for the
designware driver was dropped"
* tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
MAINTAINERS: use proper email for my I2C work
i2c: stm32f7: add support for stm32mp25 soc
i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
dt-bindings: i2c: document st,stm32mp25-i2c compatible
i2c: stm32f7: simplify status messages in case of errors
i2c: stm32f7: perform most of irq job in threaded handler
i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
i2c: i801: Add lis3lv02d for Dell XPS 15 7590
i2c: i801: Add lis3lv02d for Dell Precision 3540
i2c: wmt: Reduce redundant: REG_CR setting
i2c: wmt: Reduce redundant: function parameter
i2c: wmt: Reduce redundant: clock mode setting
i2c: wmt: Reduce redundant: wait event complete
i2c: wmt: Reduce redundant: bus busy check
i2c: mux: reg: Remove class-based device auto-detection support
i2c: make i2c_bus_type const
dt-bindings: at24: add ROHM BR24G04
eeprom: at24: use of_match_ptr()
i2c: cpm: Remove linux,i2c-index conversion from be32
i2c: imx: Make SDA actually optional for bus recovering
...
