a memory leak fix for imagination, three fixes for the recent bridge
HDMI work, a potential DoS fix and a cache coherency for panthor, a
change of panel compatible and a deferred-io fix when used with
non-highmem memory.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZtm9wgAKCRAnX84Zoj2+
djrnAX913s+RTPRiNY6ym8XQo7jABX8/XxfHK9kbhyWF1aoOmd2kBxp/wP15hAmu
ZSvMyPkBewek4CdFAS0GlkrdTkFXgvRIG415PtHTVwQU2bkdzc/3OzIhBNfkILX1
HGzozDl5ew==
=ui/V
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2024-09-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A zpos normalization fix for komeda, a register bitmask fix for nouveau,
a memory leak fix for imagination, three fixes for the recent bridge
HDMI work, a potential DoS fix and a cache coherency for panthor, a
change of panel compatible and a deferred-io fix when used with
non-highmem memory.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905-original-radical-guan-e7a2ae@houat
drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the drm/display and add necessary Kconfig selection clauses.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The following build error was triggered because of NULL string argument:
BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c: In function 'mdp5_smp_dump':
BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=]
BUILDSTDERR: 352 | drm_printf(p, "%s:%d\t%d\t%s\n",
BUILDSTDERR: | ^~
BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=]
This happens from the commit a61ddb4393 ("drm: enable (most) W=1
warnings by default across the subsystem"). Using "(null)" instead
to fix it.
Fixes: bc5289eed4 ("drm/msm/mdp5: add debugfs to show smp block status")
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/611071/
Link: https://lore.kernel.org/r/20240827165337.1075904-1-sherry.yang@oracle.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Hardware document indicates that widebus is recommended on DP on all
MDSS chipsets starting version 5.x.x and above.
Follow the guideline and mark widebus support on all relevant
chipsets for DP.
Fixes: 766f705204 ("drm/msm/dp: Remove now unused connector_type from desc")
Fixes: 1b2d98bdd7 ("drm/msm/dp: Add DisplayPort controller for SM8650")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 757a2f36ab ("drm/msm/dp: enable widebus feature for display port")
Fixes: 1b2d98bdd7 ("drm/msm/dp: Add DisplayPort controller for SM8650")
Patchwork: https://patchwork.freedesktop.org/patch/606556/
Link: https://lore.kernel.org/r/20240730195012.2595980-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add support for the HDMI PHY as present on the Qualcomm MSM8998 SoC.
This code is mostly copy & paste of the vendor code from msm-4.4
kernel.lnx.4.4.r38-rel.
Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Patchwork: https://patchwork.freedesktop.org/patch/605631/
Link: https://lore.kernel.org/r/20240724-hdmi-tx-v7-4-e44a20553464@freebox.fr
[DB: replaced division with do_div64 to fix build issues on ARM32]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Some platforms provides a mechanism for configuring the mapping between
(one or two) DisplayPort intfs and their PHYs.
In particular SC8180X requires this to be configured, since on this
platform there are fewer controllers than PHYs.
The change implements the logic for optionally configuring which PHY
each of the DP INTFs should be connected to and marks the SC8180X DPU to
program 2 entries.
For now the request is simply to program the mapping 1:1, any support
for alternative mappings is left until the use case arrise.
Note that e.g. msm-4.14 unconditionally maps INTF 0 to PHY 0 on all
platforms, so perhaps this is needed in order to get DisplayPort working
on some other platforms as well.
Co-developed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/600895/
Link: https://lore.kernel.org/r/20240625-dp-phy-sel-v3-1-c77c7066c454@linaro.org
Add support for Adreno 306A GPU what is found in MSM8917 SoC.
This GPU marketing name is Adreno 308.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
[use internal name of the GPU, reword the commit message]
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/605403/
Signed-off-by: Rob Clark <robdclark@chromium.org>
A621 is a clear A662 derivative (same lineage as A650), no explosions
or sick features, other than a NoC bug which can stall the GPU..
Add support for it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/611100/
Signed-off-by: Rob Clark <robdclark@chromium.org>
This was apparently never done before.. Program the expected values.
This also gets rid of sneakily setting that register through the HWCG
reg list on A690.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/611098/
Signed-off-by: Rob Clark <robdclark@chromium.org>
This register's magic value differs wildly between different GPUs, use
the hardcoded data instead of trying to make some logic out of it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/611096/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Store the correct values that we happen to have for some A7xx SKUs in
the GPU info struct and fill out the missing information for A6xx GPUs
based on downstream kernel information.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/611094/
[add missing entry to a615 catalog to resolve conflict]
Signed-off-by: Rob Clark <robdclark@chromium.org>
The if-else monster is so unmaintainable that one case is repeated
twice. Get rid of it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/611092/
[add missing entry to a615 catalog to resolve conflict]
Signed-off-by: Rob Clark <robdclark@chromium.org>
A650 family includes A660 family (they've got a big family), A650
itself, and some more A6XX_GEN3 SKUs, all of which should fall into
the same branch of the if-condition. Simplify that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/605206/
Signed-off-by: Rob Clark <robdclark@chromium.org>
There is another cause for soft lock-up of GPU in empty ring-buffer:
race between GPU executing last commands and CPU checking ring for
emptiness. On GPU side IRQ for retire is triggered by CACHE_FLUSH_TS
event and RPTR shadow (which is used to check ring emptiness) is updated
a bit later from CP_CONTEXT_SWITCH_YIELD. Thus if GPU is executing its
last commands slow enough or we check that ring too fast we will miss a
chance to trigger switch to lower priority ring because current ring isn't
empty just yet. This can escalate to lock-up situation described in
previous patch.
To work-around this issue we keep track of last submit sequence number
for each ring and compare it with one written to memptrs from GPU during
execution of CACHE_FLUSH_TS event.
Fixes: b1fc2839d2 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612047/
Signed-off-by: Rob Clark <robdclark@chromium.org>
On A5XX GPUs when preemption is used it's invietable to enter a soft
lock-up state in which GPU is stuck at empty ring-buffer doing nothing.
This appears as full UI lockup and not detected as GPU hang (because
it's not). This happens due to not triggering preemption when it was
needed. Sometimes this state can be recovered by some new submit but
generally it won't happen because applications are waiting for old
submits to retire.
One of the reasons why this happens is a race between a5xx_submit and
a5xx_preempt_trigger called from IRQ during submit retire. Former thread
updates ring->cur of previously empty and not current ring right after
latter checks it for emptiness. Then both threads can just exit because
for first one preempt_state wasn't NONE yet and for second one all rings
appeared to be empty.
To prevent such situations from happening we need to establish guarantee
for preempt_trigger to make decision after each submit or retire. To
implement this we serialize preemption initiation using spinlock. If
switch is already in progress we need to re-trigger preemption when it
finishes.
Fixes: b1fc2839d2 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612045/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Two fields of preempt_record which are used by CP aren't reset on
resume: "data" and "info". This is the reason behind faults which happen
when we try to switch to the ring that was active last before suspend.
In addition those faults can't be recovered from because we use suspend
and resume to do so (keeping values of those fields again).
Fixes: b1fc2839d2 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/612043/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fine grain preemption (switching from/to points within submits)
requires extra handling in command stream of those submits, especially
when rendering with tiling (using GMEM). However this handling is
missing at this point in mesa (and always was). For this reason we get
random GPU faults and hangs if more than one priority level is used
because local preemption is enabled prior to executing command stream
from submit.
With that said it was ahead of time to enable local preemption by
default considering the fact that even on downstream kernel it is only
enabled if requested via UAPI.
Fixes: a7a4c19c36 ("drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612041/
Signed-off-by: Rob Clark <robdclark@chromium.org>
There are some cases, such as the one uncovered by Commit 46d4efcccc
("drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails")
where
msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL);
is called on gpu->pdev == NULL, as the GPU device has not been fully
initialized yet.
Turns out that there's more than just the aforementioned path that
causes this to happen (e.g. the case when there's speedbin data in the
catalog, but opp-supported-hw is missing in DT).
Assigning msm_gpu->pdev earlier seems like the least painful solution
to this, therefore do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/602742/
Signed-off-by: Rob Clark <robdclark@chromium.org>
In adreno_request_fw() when debugging information is printed to the log
after firmware load, an incorrect filename is printed. 'newname' is used
instead of 'fwname', so prefix "qcom/" is being added to filename.
Looks like "copy-paste" mistake.
Fix this mistake by replacing 'newname' with 'fwname'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2c41ef1b6f ("drm/msm/adreno: deal with linux-firmware fw paths")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/602382/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Make it match the MDSS settings for sc8180x and downstream.
Note that without the previous commit that exposes the value of
macrotile_mode to mesa, this will break mesa which expects the legacy
default value of 0. Therefore we do *not* want to backport it.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607398/
Signed-off-by: Rob Clark <robdclark@chromium.org>
This adds extra parameters that affect UBWC tiling that will be used by
the Mesa implementation of VK_EXT_host_image_copy.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607401/
Signed-off-by: Rob Clark <robdclark@chromium.org>
According to downstream we should be setting RBBM_NC_MODE_CNTL to a
non-default value on a663 and a680, we don't support a663 and on a680
we're leaving it at the wrong (suboptimal) value. Just set it on all
GPUs. Similarly, plumb through level2_swizzling_dis which will be
necessary on a663.
ubwc_mode is expanded and renamed to ubwc_swizzle to match the name on
the display side. Similarly macrotile_mode should match the display
side.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607397/
Signed-off-by: Rob Clark <robdclark@chromium.org>
This was missed because we weren't using the a750-specific indexed regs.
Fixes: f3f8207d8a ("drm/msm: Add devcoredump support for a750")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/607394/
Signed-off-by: Rob Clark <robdclark@chromium.org>
This was missed thanks to the family mixup fixed in the previous commit.
Fixes: f3f8207d8a ("drm/msm: Add devcoredump support for a750")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607393/
Signed-off-by: Rob Clark <robdclark@chromium.org>
With a7xx, we need to import a new header for each new generation and
switch to a different list of registers, instead of making
backwards-compatible changes. Using the helpers inadvertently made a750
use the a740 list of registers, instead use the family directly to fix
this.
Fixes: f3f8207d8a ("drm/msm: Add devcoredump support for a750")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607392/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The Adreno A615 is used in SDM670. Add an entry to support it.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607238/
Signed-off-by: Rob Clark <robdclark@chromium.org>
According to downstream, A642L's speedbin is 129 and uses 4 as index
Signed-off-by: Eugene Lepshy <fekz115@gmail.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/606722/
Signed-off-by: Rob Clark <robdclark@chromium.org>
This was added in commit ec446d0936 ("drm/msm: call
drm_atomic_helper_suspend() and drm_atomic_helper_resume()"), but unused
since commit ca8199f134 ("drm/msm/dpu: ensure device suspend happens
during PM sleep") which switched to drm_mode_config_helper_suspend()/
drm_mode_config_helper_resume()..
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/607746/
The msm_atomic_state_clear() and msm_atomic_state_free() functions are
declared but never defined. Remove their prototypes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Patchwork: https://patchwork.freedesktop.org/patch/610618/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use kvmemdup instead of kvmalloc() + memcpy() to simplify the code.
No functional change intended.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/609596/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes for v6.11-rc5
1) Fixes from the virtual plane series, namely
- fix the list of formats for QCM2290 since it has no YUV support
- minor fix in dpu_plane_atomic_check_pipe() to check only for csc and
not csc and scaler while allowing yuv formats
- take rotation into account while allocating virtual planes
2) Fix to cleanup FB if dpu_format_populate_layout() fails. This fixes the
warning splat during DRM file closure
3) Fix to reset the phy link params before re-starting link training. This
fixes the 100% link training failure when someone starts modetest while
cable is connected
4) Long pending fix to fix a visual corruption seen for 4k modes. Root-cause
was we cannot support 4k@30 with 30bpp with 2 lanes so this is a critical
fix to use 24bpp for such cases
5) Fix to move dpu encoder's connector assignment to atomic_enable(). This
fixes the NULL ptr crash for cases when there is an atomic_enable()
without atomic_modeset() after atomic_disable() . This happens for
connectors_changed case of crtc. It fixes a NULL ptr crash reported
during hotplug.
6) Fix to simplify DPU's debug macros without which dynamic debug does not
work as expected
7) Fix the highest bank bit setting for sc7180
8) adreno: fix error return if missing firmware-name
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvxF2p3-AsjUydmSYrA0Vb+Ea7nh3VtNX0pT0Ae_Me-Kw@mail.gmail.com
-ENODEV is used to signify that there is no zap shader for the platform,
and the CPU can directly take the GPU out of secure mode. We want to
use this return code when there is no zap-shader node. But not when
there is, but without a firmware-name property. This case we want to
treat as-if the needed fw is not found.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/604564/
sc7180 programs the ubwc settings as 0x1e as that would mean a
highest bank bit of 14 which matches what the GPU sets as well.
However, the highest_bank_bit field of the msm_mdss_data which is
being used to program the SSPP's fetch configuration is programmed
to a highest bank bit of 16 as 0x3 translates to 16 and not 14.
Fix the highest bank bit field used for the SSPP to match the mdss
and gpu settings.
Fixes: 6f410b2462 ("drm/msm/mdss: populate missing data")
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Stephen Boyd <swboyd@chromium.org> # Trogdor.Lazor
Patchwork: https://patchwork.freedesktop.org/patch/607625/
Link: https://lore.kernel.org/r/20240808235227.2701479-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Take into account the plane rotation and flipping when calculating src
positions for the wide plane parts.
This is not an issue yet, because rotation is only supported for the
UBWC planes and wide UBWC planes are rejected anyway because in parallel
multirect case only the half of the usual width is supported for tiled
formats. However it's better to fix this now rather than stumbling upon
it later.
Fixes: 80e8ae3b38 ("drm/msm/dpu: add support for wide planes")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/601059/
Link: https://lore.kernel.org/r/20240627-dpu-virtual-wide-v5-3-5efb90cbb8be@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
YUV formats require only CSC to be enabled. Even decimated formats
should not require scaler. Relax the requirement and don't check for the
scaler block while checking if YUV format can be enabled.
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/601049/
Link: https://lore.kernel.org/r/20240627-dpu-virtual-wide-v5-2-5efb90cbb8be@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Before re-starting link training reset the link phy params namely
the pre-emphasis and voltage swing levels otherwise the next
link training begins at the previously cached levels which can result
in link training failures.
Fixes: 8ede2ecc3e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/605946/
Link: https://lore.kernel.org/r/20240725220450.131245-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
For cases where the crtc's connectors_changed was set without enable/active
getting toggled , there is an atomic_enable() call followed by an
atomic_disable() but without an atomic_mode_set().
This results in a NULL ptr access for the dpu_encoder_get_drm_fmt() call in
the atomic_enable() as the dpu_encoder's connector was cleared in the
atomic_disable() but not re-assigned as there was no atomic_mode_set() call.
Fix the NULL ptr access by moving the assignment for atomic_enable() and also
use drm_atomic_get_new_connector_for_encoder() to get the connector from
the atomic_state.
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/59
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK
Patchwork: https://patchwork.freedesktop.org/patch/606729/
Link: https://lore.kernel.org/r/20240731191723.3050932-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Fix the dp_panel_get_supported_bpp() API to return the minimum
supported bpp correctly for relevant cases and use this API
to correct the behavior of DP driver which hard-codes the max supported
bpp to 30.
This is incorrect because the number of lanes and max data rate
supported by the lanes need to be taken into account.
Replace the hardcoded limit with the appropriate math which accounts
for the accurate number of lanes and max data rate.
changes in v2:
- Fix the dp_panel_get_supported_bpp() and use it
- Drop the max_t usage as dp_panel_get_supported_bpp() already
returns the min_bpp correctly now
changes in v3:
- replace min_t with just min as all params are u32
Fixes: c943b4948b ("drm/msm/dp: add displayPort driver support")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/43
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/607073/
Link: https://lore.kernel.org/r/20240805202009.1120981-1-quic_abhinavk@quicinc.com
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
DPU debugging macros need to be converted to a proper drm_debug_*
macros, however this is a going an intrusive patch, not suitable for a
fix. Wire DPU_DEBUG and DPU_DEBUG_DRIVER to always use DRM_DEBUG_DRIVER
to make sure that DPU debugging messages always end up in the drm debug
messages and are controlled via the usual drm.debug mask.
I don't think that it is a good idea for a generic DPU_DEBUG macro to be
tied to DRM_UT_KMS. It is used to report a debug message from driver, so by
default it should go to the DRM_UT_DRIVER channel. While refactoring
debug macros later on we might end up with particular messages going to
ATOMIC or KMS, but DRIVER should be the default.
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/606932/
Link: https://lore.kernel.org/r/20240802-dpu-fix-wb-v2-2-7eac9eb8e895@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
- Core:
* Support for the "ats-supported" device-tree property.
* Removal of the 'ops' field from 'struct iommu_fwspec'.
* Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users.
* Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem.
* Remove stale documentation.
* Add missing MODULE_DESCRIPTION() macro.
* Misc cleanups.
- Allwinner Sun50i:
* Ensure bypass mode is disabled on H616 SoCs.
* Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker.
* Add new device-tree compatible strings.
- AMD Vi:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
- Arm SMMUv2:
* Print much more useful information on context faults.
* Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n.
* Add new Qualcomm device-tree bindings.
- Arm SMMUv3:
* Support for hardware update of access/dirty bits and reporting via
IOMMUFD.
* More driver rework from Jason, this time updating the PASID/SVA support
to prepare for full IOMMUFD support.
* Add missing MODULE_DESCRIPTION() macro.
* Minor fixes and cleanups.
- NVIDIA Tegra:
* Fix for benign fwspec initialisation issue exposed by rework on the
core branch.
- Intel VT-d:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
* Use READ_ONCE() to read volatile descriptor status.
* Remove support for handling Execute-Requested requests.
* Avoid calling iommu_domain_alloc().
* Minor fixes and refactoring.
- Qualcomm MSM:
* Updates to the device-tree bindings.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmaZTqMQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNApdB/wL2gW7ANJN3KDrOiWdq06P9fuzxbuiAegI
aKGH+aT05kJjLBXpAE5K9Bas0RbgN8iIB4TITDR9jyLnMOlTP3poy0fvB8y27q00
/WkQ7yVPkZc58ySdEOGH/EbuQkiXcD1YTjTGWP9071xzbWTDbsYN0smfbvvB9LgI
56KhdcUtB0QsqhqBzyyznHJLFdpVvDpbkiAFDXJfor7SNOOtV9a4Ect6IYteaYKz
S6+DWDEfUs+fHTEKEZ9sZVA745f2zPkT/YHY8vjLOEukWN07+3/2AKTra19DIgqF
HCGitRyZjOut1fg8sLn0SUliCKe/G/bHlwSbHnxJQ73b91YDvpzD
=xvLD
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Will Deacon:
"Core:
- Support for the "ats-supported" device-tree property
- Removal of the 'ops' field from 'struct iommu_fwspec'
- Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users
- Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem
- Remove stale documentation
- Add missing MODULE_DESCRIPTION() macro
- Misc cleanups
Allwinner Sun50i:
- Ensure bypass mode is disabled on H616 SoCs
- Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker
- Add new device-tree compatible strings
AMD Vi:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
Arm SMMUv2:
- Print much more useful information on context faults
- Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n
- Add new Qualcomm device-tree bindings
Arm SMMUv3:
- Support for hardware update of access/dirty bits and reporting via
IOMMUFD
- More driver rework from Jason, this time updating the PASID/SVA
support to prepare for full IOMMUFD support
- Add missing MODULE_DESCRIPTION() macro
- Minor fixes and cleanups
NVIDIA Tegra:
- Fix for benign fwspec initialisation issue exposed by rework on the
core branch
Intel VT-d:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
- Use READ_ONCE() to read volatile descriptor status
- Remove support for handling Execute-Requested requests
- Avoid calling iommu_domain_alloc()
- Minor fixes and refactoring
Qualcomm MSM:
- Updates to the device-tree bindings"
* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
iommu/vt-d: Fix identity map bounds in si_domain_init()
iommu: Move IOMMU_DIRTY_NO_CLEAR define
dt-bindings: iommu: Convert msm,iommu-v0 to yaml
iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
iommu/of: Support ats-supported device-tree property
dt-bindings: PCI: generic: Add ats-supported property
iommu: Remove iommu_fwspec ops
OF: Simplify of_iommu_configure()
ACPI: Retire acpi_iommu_fwspec_ops()
iommu: Resolve fwspec ops automatically
iommu/mediatek-v1: Clean up redundant fwspec checks
RDMA/usnic: Use iommu_paging_domain_alloc()
wifi: ath11k: Use iommu_paging_domain_alloc()
wifi: ath10k: Use iommu_paging_domain_alloc()
drm/msm: Use iommu_paging_domain_alloc()
vhost-vdpa: Use iommu_paging_domain_alloc()
...
