The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters
as direct function arguments. This will force us to change the API (and
all drivers' functions) every time some new parameters are added.
This is part 1/2 of the fix, as suggested in [1]:
- First simplify the code by always providing a pointer to all params
(indir, key and func); the fact that some of them may be NULL seems
like a weird historic thing or a premature optimization.
It will simplify the drivers if all pointers are always present.
- Then make the functions take a dev pointer, and a pointer to a
single struct wrapping all arguments. The set_* should also take
an extack.
Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a busy network, especially with flow control enabled, we may
experience timestamp query failures fairly regularly. After a while,
dmesg may be flooded with timestamp query failure error messages.
Silence the error message from the low level hwrm function that
sends the firmware message. Change netdev_err() to netdev_WARN_ONCE()
if this FW call ever fails.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-14-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We don't have to close and open the nic to make sure we have
valid rx timestamps. Once we have the timestamp filter applied to
the HW and the timestamp_fld_format bit is cleared in the rx
completion and the timestamp is non-zero, we can be sure that rx
timestamp is valid data.
Skip close/open when we set any timestamp filter.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-13-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new 5760X chips supports UDP GSO. Tested using udpgso_bench_tx.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-12-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rx_filter_miss counter is newly added to the rx_port_stats_ext
stats structure for newer chips. Newer firmware will return the
structure size that includes this counter. Add this entry to
the bnxt_port_stats_ext_arr array and the ethtool -S code will
pick up this counter if it is supported.
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-11-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On the new P7 chips, TPA for tunnel packets can be independently
enabled for each VNIC. The default TPA configuration should not
include UDP tunnels because the UDP ports for these tunnels are not
known yet. The chip should not aggregate these UDP tunneled packets
using default UDP ports until the ports are known.
Add a new function bnxt_hwrm_vnic_update_tunl_tpa() to enable VXLAN
and Geneve TPA if the corresponding UDP ports are known.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-10-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new bnxt_udp_tunnels_p7 struct to support the new P7 chips that
can parse VXLAN GPE packets. Add VXLAN GPE tunnel type handling to
the .set_port() and .unset_port() functions. .ndo_features_check()
is also enhanced to support VXLAN GPE which may encapsulate inner
IP packets instead of ethernet packets.
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-9-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bnxt_udp_tunnel_set_port(), use the proper ALLOC commands instead
of the FREE commands for correctness. The ALLOC and FREE commands
happen to be identical so this is just a cosmetic fix for correctness.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-8-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Fast QP modify destroy RoCE feature requires additional QP entries
in QP context backing store. FW reports the extra count to be
allocated during backing store query. Use this value and allocate extra
memory. Note that this works for both the V1 and V1 backing store
FW APIs.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TX coalesced completions are supported on newer chips to provide
one TX completion record for multiple TX packets up to the
sq_cons_idx in the completion record. This method saves PCIe
bandwidth by reducing the number of TX completions.
Only very minor changes are now required to support this mode
with the new framework that handles TX completions based on
the consumer indices.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If xmit_more condition is true, the driver may set the
TX_BD_FLAGS_NO_CMPL flag. If after this packet, the TX ring can no
longer hold a packet with maximum fragments, we will stop the TX
queue. When this happens, we must clear the TX_BD_FLAGS_NO_CMPL flag
on the last packet or there will be no completion and cause TX
timeout.
Fixes: c1056a59ae ("bnxt_en: Optimize xmit_more TX path")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two spots were missed when modifying the TX ring indexing logic.
The use of unmasked TX index in bnxt_tx_int() will cause unnecessary
__bnxt_tx_int() calls. The same issue in bnxt_tx_int_xdp() can
result in illegal array index.
Fixes: 6d1add9553 ("bnxt_en: Modify TX ring indexing logic.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
_bnxt_get_max_rings() that is invoked in bnxt_check_rings() already
accounts for the AGG ring(s) and gives a max value based on that.
Increasing for AGG rings before calling _bnxt_get_max_rings() will
result in checking for twice the number of rings than required and
it can fail. Fix it by adjusting for AGG rings after calling
_bnxt_get_max_rings().
Fixes: f5b29c6afe ("bnxt_en: Add helper to get the number of CP rings required for TX rings")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The recent commit to trim the RX and TX rings on P5 chips by assigning
each with max CP rings divided by 2 is not correct. Max CP rings
divided by 2 may be bigger than the original RX or TX and would
lead to failure. In other words, we may be checking for increased
RX/TX rings than required and it may fail.
Fix it by calling __bnxt_trim_rings() instead that would properly
trim RX and TX without the possibility of increasing their values.
Fixes: f5b29c6afe ("bnxt_en: Add helper to get the number of CP rings required for TX rings")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the chip is configured to timestamp all receive packets, the
timestamp in the RX completion is only valid if the metadata
present flag is not set for packets received on the wire. In
addition, internal loopback packets will never have a valid timestamp
and the timestamp field will always be zero. We must exclude
any 0 value in the timestamp field because there is no way to
determine if it is a loopback packet or not.
Add a new function bnxt_rx_ts_valid() to check for all timestamp
valid conditions.
Fixes: 66ed81dced ("bnxt_en: Enable packet timestamping for all RX packets")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The wait_event_interruptible_timeout() function returns 0
if the timeout elapsed, -ERESTARTSYS if it was interrupted
by a signal, and the remaining jiffies otherwise if the
condition evaluated to true before the timeout elapsed.
Driver should have checked for zero return value instead of
a positive value.
MChan: Print a warning for -ERESTARTSYS. The close operation
will proceed anyway when wait_event_interruptible_timeout()
returns for any reason. Since we do the close no matter what,
we should not return this error code to the caller. Change
bnxt_close_nic() to a void function and remove all error
handling from some of the callers.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Receive SKBs can go through the VF-rep path or the normal path.
skb_mark_for_recycle() is only called for the normal path. Fix it
to do it for both paths to fix possible stalled page pool shutdown
errors.
Fixes: 86b05508f7 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We are issuing HWRM_FUNC_RESET cmd to reset the device including
all reserved resources, but not clearing the reservations
within the driver struct. As a result, when the driver re-initializes
as part of resume, it believes that there is no need to do any
resource reservation and goes ahead and tries to allocate rings
which will eventually fail beyond a certain number pre-reserved by
the firmware.
Fixes: 674f50a5b0 ("bnxt_en: Implement new method to reserve rings.")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When flow_indr_dev_register() fails, bnxt_init_tc will free
bp->tc_info through kfree(). However, the caller function
bnxt_init_one() will ignore this failure and call
bnxt_shutdown_tc() on failure of bnxt_dl_register(), where
a use-after-free happens. Fix this issue by setting
bp->tc_info to NULL after kfree().
Fixes: 627c89d00f ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://lore.kernel.org/r/20231204024004.8245-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now with basic support for the new chip family, add the PCI IDs of the
new devices.
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-16-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new look up entries to convert the new supported speeds, advertised
speeds, etc to ethtool link modes.
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-15-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify bnxt_force_link_speed() to support the new speeds stored in
link_info->support_speeds2, including the new 400G speed.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-14-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Newer firmware supporting PAM4 112Gbps speeds use new parameters in
firmware message structures. Detect the new firmware capability and
add basic logic to report and store these new fields.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-13-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helper functions to refactor the logic that converts firmware
speed masks to ethtool speeds. Pass the phy_flags to
bnxt_get_ethtool_speeds() and the call chain. The refactoring and the
phy_flags will be needed when adding support for the new speeds in the
next patches.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-12-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These new completion types are supported on the new P7 chips.
These new types have commonalities with the legacy types. After
the refactoring, we mainly have to add new functions to handle the
the new meta data formats and the RX hash information in the new
types.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-11-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor bnxt_tpa_start() by adding bnxt_tpa_metadata() to gather the
metadata from the TPA_START completion. This makes it easier to
support the new P7 chip which has a modified TPA_START completion
structure with different metadata formats. We also add vlan_valid
and cfa_code_valid fields to the bnxt_tpa_info structure so that the
VLAN and VF rep logic can be common for all chips. The VLAN metadata
is now collected in bnxt_tpa_start() only when it is valid and the
vlan_valid field will be set. bnxt_tpa_end() can now use common VLAN
logic for all chips.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-10-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor the logic in the RX path that checks for the accelerated VLAN
tag by adding a new function. This will make it easier to support
the new receive logic on P7 chips.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-9-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new RX, TX, and TPA hardware interface structures and macros for the
P7 chips.
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-8-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new rss_cap field in the per device struct bnxt and move all
the RSS capability fields there. It will be easier to add new RSS
capabilities for the new P7 chips.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new chip family passes the Toggle bits to the driver in the NQE
notification. The driver now stores this value and sends it back to
hardware when it re-arms the RX and TX CQs. Together with the earlier
patch that guarantees the driver will only re-arm the CQ at the end of
NAPI polling if it has seen a new NQE, this method allows the hardware
to detect any dropped doorbells.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The doorbell offset on P5 chips is hard coded. On the new P7 chips,
it is returned by the firmware. Simplify the logic that determines
this offset and store it in a new db_offset field in struct bnxt.
Also, provide this offset to the RoCE driver in struct bnxt_en_dev.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Repurpose the BNXT_FLAG_CHIP_SR2 flag by renaming it to
BNXT_FLAG_CHIP_P7 since the SR2 chip never went to production. The SR2
statictics structure is also renamed for the P7 chip. Define the basic
P7 doorbell bits (Epoch. Toggle, etc) and implement the Epoch bit
logic. The next higher bit beyond the legal doorbell mask is the
Epoch bit used for doorbells on P7 chips. This bit is used by the
chip to detect dropped doorbells.
The 57608 chip ID belonging to the P7 family is also defined. Note
that the PCI ID is not added until the last patch in the series.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This updated interface supports the new 5760X P7 chip family. It has
the changes to support the new link speeds/modes and other changes
for the basic L2 features.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current code determines the last backing store valid type during
bnxt_hwrm_func_backing_store_qcaps_v2(). In effect, the last type
is determined based on what firmware advertises. The more correct
way is to determine it based on what the driver is configuring. The
driver may not configure all the backing store types advertised by
firmware.
Move the logic to determine the last type to bnxt_backing_store_cfg_v2().
We need to pass the legacy enable flags to the function in case only
the legacy types are being configured.
Fixes: 236e237f8f ("bnxt_en: Add support for HWRM_FUNC_BACKING_STORE_CFG_V2 firmware calls")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201223924.26955-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an EEH error is encountered by a PCI adapter, the EEH driver
modifies the PCI channel's state as shown below:
enum {
/* I/O channel is in normal state */
pci_channel_io_normal = (__force pci_channel_state_t) 1,
/* I/O to channel is blocked */
pci_channel_io_frozen = (__force pci_channel_state_t) 2,
/* PCI card is dead */
pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
};
If the same EEH error then causes the tg3 driver's transmit timeout
logic to execute, the tg3_tx_timeout() function schedules a reset
task via tg3_reset_task_schedule(), which may cause a race condition
between the tg3 and EEH driver as both attempt to recover the HW via
a reset action.
EEH driver gets error event
--> eeh_set_channel_state()
and set device to one of
error state above scheduler: tg3_reset_task() get
returned error from tg3_init_hw()
--> dev_close() shuts down the interface
tg3_io_slot_reset() and
tg3_io_resume() fail to
reset/resume the device
To resolve this issue, we avoid the race condition by checking the PCI
channel state in the tg3_reset_task() function and skip the tg3 driver
initiated reset when the PCI channel is not in the normal state. (The
driver has no access to tg3 device registers at this point and cannot
even complete the reset task successfully without external assistance.)
We'll leave the reset procedure to be managed by the EEH driver which
calls the tg3_io_error_detected(), tg3_io_slot_reset() and
tg3_io_resume() functions as appropriate.
Adding the same checking in tg3_dump_state() to avoid dumping all
device registers when the PCI channel is not in the normal state.
Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com>
Tested-by: Venkata Sai Duggi <venkata.sai.duggi@ibm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201001911.656-1-thinhtr@linux.vnet.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link page pool instances to netdev for the drivers which
already link to NAPI. Unless the driver is doing something
very weird per-NAPI should imply per-netdev.
Add netsec as well, Ilias indicates that it fits the mold.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In preparation to support a new P7 chip which has a lot of similarities
with the P5 chip, rename the BNXT_FLAG_CHIP_P5 flag to
BNXT_FLAG_CHIP_P5_PLUS. This will make it clear that the flag is for
P5 and newer chips.
Also, since there are no additional P5 variants in production, rename
BNXT_FLAG_CHIP_P5_THOR() to BNXT_FLAG_CHIP_P5() to keep the naming
more simple.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231120234405.194542-14-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify the NAPI logic for the new doorbell mechanism on P7 chips.
These changes are compatible with the current P5 chips.
In the current logic, bnxt_poll_p5() services 1 or more CQs for each
MSIX. Each MSIX has an associated NQ and each NQ has 1 or more
associated CQs. If any CQ reaches NAPI budget, we'll stay in polling
mode and will unconditionally check and service all CQs until we exit
polling. We always re-arm all CQs when we exit polling.
To be compatible with the new Toggle bit mechanism in P7 chips, we need
to modify the logic so that we service and re-arm the CQ only if we
receive an NQE notification for work for that CQ. We add a new
had_nqe_notify bit to the cp_ring_info structure and it gets set when we
see the NQE notification for that CQ anytime during polling. We'll
service and re-arm only the CQs with the had_nqe_notify bits set.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231120234405.194542-13-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify the RX indexing logic for both RX ring and RX aggregation ring just
like the TX logic. Change it so that the index increments unbounded and
mask it only when needed.
Modify the existing RX macros so that the index is not masked. Add new
macros RING_RX()/RING_RX_AGG() to mask it only when needed to get the
index of rxr->rx_buf_ring[] and rxr->rx_agg_ring[].
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231120234405.194542-12-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the TX ring logic so that the index increments unbounded and
mask it only when needed.
Modify the existing macros so that the index is not masked. Add a
new macro RING_TX() to mask it only when needed to get the index of
txr->tx_buf_ring[].
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231120234405.194542-11-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This allows the doorbell related logic to mask the doorbell index
to the proper range before writing the doorbell.
The current code masks the doorbell index immediately to keep it in the
legal ranges for the most part. Subsequent patches will change the
logic so that the index increments unbounded and it only gets masked
before use. This is preparation work for the new chip that requires an
additional Epoch bit in the doorbell that needs to toggle when the index
has wrapped around.
This patch just adds the basic infrastructure and the logic is largely
unchanged. We now replace RING_CMP() with the new DB_RING_IDX() at
appropriate places where we mask the completion ring index before
writing the doorbell.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231120234405.194542-10-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Newer chips starting with 57600 will use this new firmware HWRM call to
configure backing store memory. Add this new call if it is supported
by the firmware.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231120234405.194542-9-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new v2 firmware API if supported by the firmware. We now have the
infrastructure to support the v2 API.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231120234405.194542-8-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bnxt_alloc_ctx_mem(), the logic to set up the context memory entries
and to allocate the context memory tables is done repetitively. Add
a helper function to simplify the code.
The setup of the Fast Path TQM entries relies on some information from
the Slow Path TQM entries. Copy the SP_TQM entries to the FP_TQM
entries to simplify the logic.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231120234405.194542-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the newly added pg_info field in bnxt_ctx_mem_type struct and
remove the standalone page info structures in bnxt_ctx_mem_info.
This now completes the reorganization of the context memory
structures to work better with the new and more flexible firmware
interface for newer chips.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231120234405.194542-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This will further improve the organization of the bnxt_ctx_mem_info
structure by moving the standalone page info structures into the
bnxt_ctx_mem_type array. Add the allocation and free logic first and
the next patch will migrate to use the new infrastructure.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231120234405.194542-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current code uses a flat bnxt_ctx_mem_info structure to store 8
types of context memory for the NIC. All the context memory types
are very similar and have similar parameters. They can all share a
common structure to improve the organization. Also, new firmware
interface will provide a new API to retrieve each type of context
memory by calling the API repeatedly.
This patch reorganizes the bnxt_ctx_mem_info structure to fit better
with the new firmware interface. It will also work with the legacy
firmware interface. The flat fields in bnxt_ctx_mem_info are replaced
by the bnxt_ctx_mem_type array. The bnxt_mem_init array info will no
longer be needed.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231120234405.194542-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We always free bp->ctx right after calling bnxt_free_ctx_mem(), so just
free it at the end of that function to make things simpler.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231120234405.194542-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
