This allows to finalize the CSA per link.
In case the switch didn't work, tear down the MLD connection.
Also pass the ieee80211_bss_conf to post_channel_switch to let the
driver know which link completed the switch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230828130311.3d3eacc88436.Ic2d14e2285aa1646216a56806cfd4a8d0054437c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is equivalent to 'gen2', and it was always confusing to have
two identical config entries. The split config patch actually had
been originally developed after removing 'use_tfh" and didn't add
the use_tfh in the new configs as they'd later been copied to the
new files. Thus the easiest way to fix the init crash here now is
to just remove use_tfh (which is erroneously unset in most of the
configs now) and use 'gen2' in the code instead.
There's possibly still an unwind error in iwl_txq_gen2_init() as
it crashes if TXQ 0 fails to initialize, but we can deal with it
later since the original failure is due to the use_tfh confusion.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Reported-and-tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217622
Link: https://lore.kernel.org/all/9274d9bd3d080a457649ff5addcc1726f08ef5b2.camel@xry111.site/
Link: https://lore.kernel.org/all/CAAJw_Zug6VCS5ZqTWaFSr9sd85k%3DtyPm9DEE%2BmV%3DAKoECZM%2BsQ@mail.gmail.com/
Fixes: 19898ce9cf ("wifi: iwlwifi: split 22000.c into multiple files")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230710145038.84186-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There several transitions to handle in eSR mode:
* SMPS should be disabled when in eSR mode
* indicate to the fw whether the new added link should use the
listen lmac or the main lmac
* RLC is offloaded when in eSR mode; adjust RLC command accordingly
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.fb6409f44aca.I502460dec15e0b76035ad3cd809afa4ac16e9fe1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The max active links that are supported by the FW is hard coded.
This is wrong since this value is HW-dependent. Fix this by
determining according to the actual HW.
Also remove a redundant check that the number of active links
doesn't exceeds the maximum.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.e78ad74c6715.I68b26911c0a312d72eaf25344b448d03b1c61f4e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the AP is an AP MLD, then we shouldn't track just the BSSID
but the MLD address. Just generally use ap_addr since it has
the BSSID in the non-MLD case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.b6a4f7edd10c.Ie5a8029ed686b9441620ba06596d430432f65559@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We skipped this in the past, but now we will need it for some
platforms. Implement loading the PHY filter configuration IDs
from the WPFC ACPI table. Note that the firmware must also be
aware of the right filter configuration IDs (they're just the
IDs of a filter configuration, not the actual configuration).
Remove the useless hardcoded zeroes while at it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.035026ea3169.I3a1fc1fe644fefa0d818ee1926c5fc331d68e8a3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Newest firmware don't advertise the version of ADD_STA because it has
been replaced by another command. There are old firmware images
that also don't advertise it. Replace all the checks with a new
inline, and in that check for either MLD API or the ADD_STA
command version.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.4b9305510223.I7cc143d87186f8441e9b8435cc550b76734c7eef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware only supports a single IGTK, and due to some
changes it really doesn't like to have multiple programmed
in later versions. Since only newer firmware cannot remove
a key that isn't present any more, adjust only the MLD API
code to keep track of the previous IGTK and remove it when
a new one is added.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.3fde1ef09270.I2e12a3b0bba4325c07dc8fcce39b711f158bd621@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The iwl_mvm_get_lmac_id() function is currently
defined as a static inline function under fw/api
and receives mvm's fw pointer. It will need the
ability to access other mvm struct members for
future capabilities such as debug. Move the function
out of the fw/api and into mvm proper as a regular
function and have it receive the pointer to mvm.
Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.507b2f9f64eb.I0ec91310e1911c33faf396b5e17bcb11a164f6ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for the MCC update response version 8.
Versions 5-6 are already covered by the existing
flags conversion, and 7 isn't used.
The capabilities field in iwl_mcc_update_resp is 32 bits
wide now, and the flags moved, so some more changes are
needed.
While at it, convert the flags to bool (to avoid having
to deal with BIT(16) specially etc.) and use the
struct_size() macro for the memory allocation.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.71a7070aecd7.Ibddcb9fbfa74895f742c0ac20968720691c94853@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All of the station elements are really elements for the link. Create
them from the correct callback and return the link specific information
rather than always using the default link.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.a8e0c40d325e.I374d9433c3b8694667e1ce550d65f6f1f0d23c05@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a number of upcoming things in both the stack and
drivers that would otherwise conflict, so merge wireless to
wireless-next to be able to avoid those conflicts.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit b70813e4a8 ("wifi: iwlwifi: update response
for mcc_update command") since it causes a merge conflict, and it
seems easier to redo the patch later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for the MCC update response version 8.
Versions 5-6 are already covered by the existing
flags conversion, and 7 isn't used.
The capabilities field in iwl_mcc_update_resp is 32 bits
wide now, and the flags moved, so some more changes are
needed.
While at it, convert the flags to bool (to avoid having
to deal with BIT(16) specially etc.) and use the
struct_size() macro for the memory allocation.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.fd9016f8f994.Ibddcb9fbfa74895f742c0ac20968720691c94853@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware added new fields to be able to pass the link_id as the AP
knows it and the esr_transition_timeout.
For now, pass only the link_id since we don't have access to the
esr_transition_timeout yet.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.bf80ce717458.Icd4174911227c00cd12783fe1f517ae8097809b9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When adding a PASN station, the non MLD API was used. This results
in assert when operating as MLD. Fix it to use the MLD API when
operating as MLD. For now, the default link is used for the added
station.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.7c35dccc8a12.I7bc78cd16d7c750f42fdd60e07e839a860d279d2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This new version of missed beacon notification uses link_id
instead of mac_id. Also add an option to use link id for
retrieving vif.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.17fe1cc632f1.Id1fabb532e2174712fe17d4ad86a2c8c64ae84da@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This feature depends on a platform bugfix. Until we have a
mechanism that can verify a platform has the required bugfix,
disable RFI.
Fixes: ef3ed33dfc ("wifi: iwlwifi: bump FW API to 77 for AX devices")
Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Link: https://lore.kernel.org/linux-wireless/CAAJw_ZvZdFpw9W2Hisc9c2BAFbYAnQuaFFaFG6N7qPUP2fOL_w@mail.gmail.com/
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When CSME is connected and has link protection set, the driver must
connect to the same AP CSME is connected to.
When in link protection, modify scan request parameters to include
only the channel of the AP CSME is connected to and scan for the
same SSID. In addition, filter the scan results to include only
results from the same AP. This will make sure the driver will connect
to the same AP and will do it fast enough to keep the session alive.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230418122405.c1b55de3d704.I3895eebe18b3b672607695c887d728e113fc85ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we have MLO connections, a BAID applies to multiple
firmware stations. Track the station mask instead of the
station ID, getting rid of a few more deflink cases and
preparing for handling link switching for BAIDs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.c08523808c34.I719b7bba499648d1495ed3e3a90889d4732ef15d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The setting of the rate used for non station cases did not take into
consideration the interface type etc., thus when probe responses
are transmitted on P2P Device interface etc. CCK rates were used
which is not allowed.
Modify the code so the non station case would consider the
interface type etc. For HWs/FWs that do not support rate control,
preserve the previous behavior, i.e., take the rate from the
skb metadata and adjust as needed.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.fa0e4d42205d.Iab4784560c77b965fec070d4d0a1ec84171d94ff@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of relying on the AP STA ID and dereferencing our
firmware -> mac80211 STA array when we really only need
the STA, not the per-link information (and might not have
it, e.g. for a pairwise key installation where this is
relevant), keep track of the AP STA as a pointer to the
mac80211 STA, protected by the mutex. Then use it here in
the key code instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.7db01b1508de.I88e6d252cdb0a6e4581d7c5fd7cbc037b4fd40ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* TC offload support for drivers below mac80211
* reduced neighbor report (RNR) handling for AP mode
* mac80211 mesh fast-xmit and fast-rx support
* support for another mesh A-MSDU format
(seems nobody got the spec right)
Major driver changes:
Kalle moved the drivers that were just plain C files
in drivers/net/wireless/ to legacy/ and virtual/ dirs.
hwsim
* multi-BSSID support
* some FTM support
ath11k
* MU-MIMO parameters support
* ack signal support for management packets
rtl8xxxu
* support for RTL8710BU aka RTL8188GU chips
rtw89
* support for various newer firmware APIs
ath10k
* enabled threaded NAPI on WCN3990
iwlwifi
* lots of work for multi-link/EHT (wifi7)
* hardware timestamping support for some devices/firwmares
* TX beacon protection on newer hardware
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmQl9gkACgkQ10qiO8sP
aACnTw/+KHEjBePPNSiVOziE6tlKSIruabrsSbBBWWx4btFBT0YAnqiwf4Zyp67r
VaRWPxRNqjriKMPYDn/bpCrRgkqeN50iCV9n+/xh4TaiLokea0IuA/KDLNM+vBPf
0VJBpNdW8tKLM0YluGWuoWUAlkjujBzjHaW0sKoII/PLh6evLGEIhqdveE8052Bc
P3UMu3+FHXg+E1+1tpn/AK+b6bGQeBN3KG3h7uocwR4QE6xROdFPAmXDohbJ98pG
6EmCDuuFiYPwkKu3GsxmKFNbq7NatPoFtghBPQi4Sn9wGgWWlJcK7hlNTDDW5O7c
ZqyqY8BiUnh9A1ZcUCKLiHYx+mjxiE2P5wlfDbiZGm7k2JkrBu+AebRvtD4ie/UF
db8T321kZJ5XKI89yQT2DXzfrvhbw2D85eFudQpIyRguoPKicICLWOyw84+esNTI
2vqnbPVnYrLQ/X7SzKcdIh74fcSvL8Dj0EiUAzvhPDbgIvexiYDetBXVss8tXBsn
bpCRND05tpCqqW+LyulglmYTAbhZdCYOy4DAB+g6dtxHOR8A0eLbUHocm0zlPvqd
sc4pYpXHx4x+X3FPHpfxOqKUO87P7SvJ++d3Y3e09/ObLPSkn65ihsGJpMN/fj1e
BkJ2yF0KUfJMNhSl5p8VELT3XZevT0EIEKMvwoIgSsWPR8cxqoI=
=Zi6X
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Major stack changes:
* TC offload support for drivers below mac80211
* reduced neighbor report (RNR) handling for AP mode
* mac80211 mesh fast-xmit and fast-rx support
* support for another mesh A-MSDU format
(seems nobody got the spec right)
Major driver changes:
Kalle moved the drivers that were just plain C files
in drivers/net/wireless/ to legacy/ and virtual/ dirs.
hwsim
* multi-BSSID support
* some FTM support
ath11k
* MU-MIMO parameters support
* ack signal support for management packets
rtl8xxxu
* support for RTL8710BU aka RTL8188GU chips
rtw89
* support for various newer firmware APIs
ath10k
* enabled threaded NAPI on WCN3990
iwlwifi
* lots of work for multi-link/EHT (wifi7)
* hardware timestamping support for some devices/firwmares
* TX beacon protection on newer hardware
* tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (181 commits)
wifi: clean up erroneously introduced file
wifi: iwlwifi: mvm: correctly use link in iwl_mvm_sta_del()
wifi: iwlwifi: separate AP link management queues
wifi: iwlwifi: mvm: free probe_resp_data later
wifi: iwlwifi: bump FW API to 75 for AX devices
wifi: iwlwifi: mvm: move max_agg_bufsize into host TLC lq_sta
wifi: iwlwifi: mvm: send full STA during HW restart
wifi: iwlwifi: mvm: rework active links counting
wifi: iwlwifi: mvm: update mac config when assigning chanctx
wifi: iwlwifi: mvm: use the correct link queue
wifi: iwlwifi: mvm: clean up mac_id vs. link_id in MLD sta
wifi: iwlwifi: mvm: fix station link data leak
wifi: iwlwifi: mvm: initialize max_rc_amsdu_len per-link
wifi: iwlwifi: mvm: use appropriate link for rate selection
wifi: iwlwifi: mvm: use the new lockdep-checking macros
wifi: iwlwifi: mvm: remove chanctx WARN_ON
wifi: iwlwifi: mvm: avoid sending MAC context for idle
wifi: iwlwifi: mvm: remove only link-specific AP keys
wifi: iwlwifi: mvm: skip inactive links
wifi: iwlwifi: mvm: adjust iwl_mvm_scan_respect_p2p_go_iter() for MLO
...
====================
Link: https://lore.kernel.org/r/20230330205612.921134-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The link management queues associated with the broadcast stations
were forgotten and so the same queue was used with both broadcast
stations. This leads to lost frames and warnings on cleanup and
HW restart.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.0671fa976832.Id5aa9856fd5984e447f247e6d0c3979d9794a21a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we remove the AP station, we iterate over the links
and remove all the keys, however, the key iteration will
return all keys for all links, so skip the ones that we
don't need based on the link ID.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.e724878f502e.I66870d4629244b4b309be79e11cbbd384bdf93be@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a fw_id_to_link_sta array in mvm to track the link
STA for each firmware station ID, and then use that to
report the link a frame was received on (since we know
the station ID from firmware).
Notably, this fixes beacon tracking for the correct link
since mac80211 now queues and processes those on the one
link identified by the link ID only.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.c7dd3ec18077.I12ef9eb4a5b8b5c2b9d6bcaa1fda73b59eba39d8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It has to be done per link. We still don't support keys
configuration for several links, but the single vif link can
still point to a link different from deflink. For now handle
the removal of keys for the default link.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.19d729cc4654.I4ebe8e3eb5fc00a994761f7c0ad40107382705ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement the link change ops for links and stations.
Note that the stations one is empty for now as we only
have support for a single link so far, and then the
stations are created with the first link as deflink by
mac80211, so right now we don't really need anything.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.6186c5a37e99.Ifd00d3ee93356ddef273aa18f1e081cd8f2c84ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Driver uses link_id as an index in the array. FW currently can
support only 2 concurrently active links per vif with the ids in the
range 0-3. Add a mapping of dirver link ids to fw link id and track the
number of active link ids.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.a53e5df49c33.I02b25648d2d5ca370c0697bf19d0d34724eae8a1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These are two new handlers for MLO. As the configurations done in
bss_info_changed() are now split into two separate flows, use MLO
specific implementation instead of common functions with the non-MLO
code.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.7b238cae0895.Ieb87f204787fb1c7cb7562e1cbf54ef518d87123@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware now allows adding a link that's not yet bound
to a PHY context. Make use of that to align the driver with
mac80211's API expectations. For now, just add the link at
the same time as the MAC since we don't yet have real MLD
support, but that'll obviously change later. This fixes an
issue with apStaId tracking in the firmware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.097e5008b637.I4e75c6c11e21c08d28ff6a066be36629d3975db6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
HE/EHT support is reported to FW if there's at least one link
that supports it. Configure beacon separately for each link.
Don't send the beacon template before adding the MAC.
Co-developed-by: Johannes Berg <johannes.berg@intel.com>
Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.5ef4efeda2dd.I6ebda2b71c964b9aa63240c9fa1ee0d28099fe6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
