Repair the realtime summary data by constructing a new rtsummary file in
the scrub temporary file, then atomically swapping the contents.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
All current and pending xfile users use the xfile_obj_load
and xfile_obj_store API, so make those the actual implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
I mistakenly turned off CONFIG_XFS_RT in the Kconfig file for arm64
variant of the djwong-wtf git branch. Unfortunately, it took me a good
hour to figure out that RT wasn't built because this is what got printed
to dmesg:
XFS (sda2): realtime geometry sanity check failed
XFS (sda2): Metadata corruption detected at xfs_sb_read_verify+0x170/0x190 [xfs], xfs_sb block 0x0
Whereas I would have expected:
XFS (sda2): Not built with CONFIG_XFS_RT
XFS (sda2): RT mount failed
The root cause of these problems is the conditional compilation of the
new functions xfs_validate_rtextents and xfs_compute_rextslog that I
introduced in the two commits listed below. The !RT versions of these
functions return false and 0, respectively, which causes primary
superblock validation to fail, which explains the first message.
Move the two functions to other parts of libxfs that are not
conditionally defined by CONFIG_XFS_RT and remove the broken stubs so
that validation works again.
Fixes: e14293803f ("xfs: don't allow overly small or large realtime volumes")
Fixes: a6a38f309a ("xfs: make rextslog computation consistent with mkfs")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_format.h has a bunch odd wrappers for helper functions and mount
structure access using RT* prefixes. Replace them with their open coded
versions (for those that weren't entirely unused) and remove the wrappers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
I forgot that the xfs_mount tracks the size and number of levels in the
realtime summary file, and that the rt summary file can have more blocks
mapped to the data fork than m_rsumsize implies if growfsrt fails.
So. Add to the rtsummary scrubber an explicit check that all the
summary geometry values are correct, then adjust the rtsummary i_size
checks to allow for the growfsrt failure case. Finally, flag post-eof
blocks in the summary file.
While we're at it, split the extent map checking so that we only call
xfs_bmapi_read once per extent instead of once per rtsummary block.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Inode resource usage is tracked in the quota metadata. Repairing a file
might change the resources used by that file, which means that we need
to attach dquots to the file that we're examining before accessing
anything in the file protected by the ILOCK.
However, there's a twist: a dquot cache miss requires the dquot to be
read in from the quota file, during which we drop the ILOCK on the file
being examined. This means that we *must* try to attach the dquots
before taking the ILOCK.
Therefore, dquots must be attached to files in the scrub setup function.
If doing so yields corruption errors (or unknown dquot errors), we
instead clear the quotachecked status, which will cause a quotacheck on
next mount. A future series will make this trigger live quotacheck.
While we're here, change the xrep_ino_dqattach function to use the
unlocked dqattach functions so that we avoid cycling the ILOCK if the
inode already has dquots attached. This makes the naming and locking
requirements consistent with the rest of the filesystem.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Simplify the calling convention of these functions since the
xfs_rtalloc_args structure contains the parameters we need.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that xfs_rtalloc_args holds references to the last-read bitmap and
summary blocks, we don't need to pass the buffer pointer out of
xfs_rtbuf_get.
Callers no longer have to xfs_trans_brelse on their own, though they are
required to call xfs_rtbuf_cache_relse before the xfs_rtalloc_args goes
out of scope.
While we're at it, create some trivial helpers so that we don't have to
remember if "0" means "bitmap" and "1" means "summary".
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Profiling a workload on a highly fragmented realtime device showed a ton
of CPU cycles being spent in xfs_trans_read_buf() called by
xfs_rtbuf_get(). Further tracing showed that much of that was repeated
calls to xfs_rtbuf_get() for the same block of the realtime bitmap.
These come from xfs_rtallocate_extent_block(): as it walks through
ranges of free bits in the bitmap, each call to xfs_rtcheck_range() and
xfs_rtfind_{forw,back}() gets the same bitmap block. If the bitmap block
is very fragmented, then this is _a lot_ of buffer lookups.
The realtime allocator already passes around a cache of the last used
realtime summary block to avoid repeated reads (the parameters rbpp and
rsb). We can do the same for the realtime bitmap.
This replaces rbpp and rsb with a struct xfs_rtbuf_cache, which caches
the most recently used block for both the realtime bitmap and summary.
xfs_rtbuf_get() now handles the caching instead of the callers, which
requires plumbing xfs_rtbuf_cache to more functions but also makes sure
we don't miss anything.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Consolidate the arguments passed around the rt allocator into a
struct xfs_rtalloc_arg similar to how the btree allocator arguments
are consolidated in a struct xfs_alloc_arg....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create get and set functions for rtsummary words so that we can redefine
the ondisk format with a specific endianness. Note that this requires
the definition of a distinct type for ondisk summary info words so that
the compiler can perform proper typechecking.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create helper functions that compute the number of blocks or words
necessary to store the rt bitmap.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Convert the realtime summary file macros to helper functions so that we
can improve type checking.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Replace these macros with typechecked helper functions. Eventually
we're going to add more logic to the helpers and it'll be easier if we
don't have to macro it up.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a helper to convert a realtime extent to a realtime block. Later
on we'll change the helper to use bit shifts when possible.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This helper function validates that a range of *blocks* in the
realtime section is completely contained within the realtime section.
It does /not/ validate ranges of *rtextents*. Rename the function to
avoid suggesting that it does, and change the type of the @len parameter
since xfs_rtblock_t is a position unit, not a length unit.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move all the declarations for functionality in xfs_rtbitmap.c into a
separate xfs_rtbitmap.h header file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Finish the realtime summary scrubber by adding the functions we need to
compute a fresh copy of the rtsummary info and comparing it to the copy
on disk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Move the realtime summary file checking code to a separate file in
preparation to actually implement it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
