The ADD_ADDR 0 with the address from the initial subflow should not be
considered as a new address: this is not something new. If the host
receives it, it simply means that the address is available again.
When receiving an ADD_ADDR for the ID 0, the PM already doesn't consider
it as new by not incrementing the 'add_addr_accepted' counter. But the
'accept_addr' might not be set if the limit has already been reached:
this can be bypassed in this case. But before, it is important to check
that this ADD_ADDR for the ID 0 is for the same address as the initial
subflow. If not, it is not something that should happen, and the
ADD_ADDR can be ignored.
Note that if an ADD_ADDR is received while there is already a subflow
opened using the same address, this ADD_ADDR is ignored as well. It
means that if multiple ADD_ADDR for ID 0 are received, there will not be
any duplicated subflows created by the client.
Fixes: d0876b2284 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
'local_addr_used' and 'add_addr_accepted' are decremented for addresses
not related to the initial subflow (ID0), because the source and
destination addresses of the initial subflows are known from the
beginning: they don't count as "additional local address being used" or
"ADD_ADDR being accepted".
It is then required not to increment them when the entrypoint used by
the initial subflow is removed and re-added during a connection. Without
this modification, this entrypoint cannot be removed and re-added more
than once.
Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/512
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Reported-by: syzbot+455d38ecd5f655fc45cf@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/00000000000049861306209237f4@google.com
Cc: stable@vger.kernel.org
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It is possible to have in the list already closed subflows, e.g. the
initial subflow has been already closed, but still in the list. No need
to try to close it again, and increments the related counters again.
Fixes: 0ee4261a36 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow has a special local ID: 0. It is specific per
connection.
When a global endpoint is deleted and re-added later, it can have a
different ID -- most services managing the endpoints automatically don't
force the ID to be the same as before. It is then important to track
these modifications to be consistent with the ID being used for the
address used by the initial subflow, not to confuse the other peer or to
send the ID 0 for the wrong address.
Now when removing an endpoint, msk->mpc_endpoint_id is reset if it
corresponds to this endpoint. When adding a new endpoint, the same
variable is updated if the address match the one of the initial subflow.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The lookup_subflow_by_daddr() helper checks if there is already a
subflow connected to this address. But there could be a subflow that is
closing, but taking time due to some reasons: latency, losses, data to
process, etc.
If an ADD_ADDR is received while the endpoint is being closed, it is
better to try connecting to it, instead of rejecting it: the peer which
has sent the ADD_ADDR will not be notified that the ADD_ADDR has been
rejected for this reason, and the expected subflow will not be created
at the end.
This helper should then only look for subflows that are established, or
going to be, but not the ones being closed.
Fixes: d84ad04941 ("mptcp: skip connecting the connected address")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Taking the first one on the list doesn't work in some cases, e.g. if the
initial subflow is being removed. Pick another one instead of not
sending anything.
Fixes: 84dfe3677a ("mptcp: send out dedicated ADD_ADDR packet")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow has a special local ID: 0. When an endpoint is being
deleted, it is then important to check if its address is not linked to
the initial subflow to send the right ID.
If there was an endpoint linked to the initial subflow, msk's
mpc_endpoint_id field will be set. We can then use this info when an
endpoint is being removed to see if it is linked to the initial subflow.
So now, the correct IDs are passed to mptcp_pm_nl_rm_addr_or_subflow(),
it is no longer needed to use mptcp_local_id_match().
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the endpoint used by the initial subflow is removed and re-added
later, the PM has to force the ID 0, it is a special case imposed by the
MPTCP specs.
Note that the endpoint should then need to be re-added reusing the same
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pr_debug() have been added in various places in MPTCP code to help
developers to debug some situations. With the dynamic debug feature, it
is easy to enable all or some of them, and asks users to reproduce
issues with extra debug.
Many of these pr_debug() don't end with a new line, while no 'pr_cont()'
are used in MPTCP code. So the goal was not to display multiple debug
messages on one line: they were then not missing the '\n' on purpose.
Not having the new line at the end causes these messages to be printed
with a delay, when something else needs to be printed. This issue is not
visible when many messages need to be printed, but it is annoying and
confusing when only specific messages are expected, e.g.
# echo "func mptcp_pm_add_addr_echoed +fmp" \
> /sys/kernel/debug/dynamic_debug/control
# ./mptcp_join.sh "signal address"; \
echo "$(awk '{print $1}' /proc/uptime) - end"; \
sleep 5s; \
echo "$(awk '{print $1}' /proc/uptime) - restart"; \
./mptcp_join.sh "signal address"
013 signal address
(...)
10.75 - end
15.76 - restart
013 signal address
[ 10.367935] mptcp:mptcp_pm_add_addr_echoed: MPTCP: msk=(...)
(...)
=> a delay of 5 seconds: printed with a 10.36 ts, but after 'restart'
which was printed at the 15.76 ts.
The 'Fixes' tag here below points to the first pr_debug() used without
'\n' in net/mptcp. This patch could be split in many small ones, with
different Fixes tag, but it doesn't seem worth it, because it is easy to
re-generate this patch with this simple 'sed' command:
git grep -l pr_debug -- net/mptcp |
xargs sed -i "s/\(pr_debug(\".*[^n]\)\(\"[,)]\)/\1\\\n\2/g"
So in case of conflicts, simply drop the modifications, and launch this
command.
Fixes: f870fa0b57 ("mptcp: Add MPTCP socket stubs")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-4-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
select_local_address() and select_signal_address() both select an
endpoint entry from the list inside an RCU protected section, but return
a reference to it, to be read later on. If the entry is dereferenced
after the RCU unlock, reading info could cause a Use-after-Free.
A simple solution is to copy the required info while inside the RCU
protected section to avoid any risk of UaF later. The address ID might
need to be modified later to handle the ID0 case later, so a copy seems
OK to deal with.
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/45cd30d3-7710-491c-ae4d-a1368c00beb1@redhat.com
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-14-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When reacting upon the reception of an ADD_ADDR, the in-kernel PM first
looks for fullmesh endpoints. If there are some, it will pick them,
using their entry ID.
It should set the ID 0 when using the endpoint corresponding to the
initial subflow, it is a special case imposed by the MPTCP specs.
Note that msk->mpc_endpoint_id might not be set when receiving the first
ADD_ADDR from the server. So better to compare the addresses.
Fixes: 1a0d6136c5 ("mptcp: local addresses fullmesh")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-12-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ID 0 is specific per MPTCP connections. The per netns entries cannot
have this special ID 0 then.
But that's different for the userspace PM where the entries are per
connection, they can then use this special ID 0.
Fixes: f40be0db0b ("mptcp: unify pm get_flags_and_ifindex_by_id")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-11-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding the following warning ...
WARN_ON_ONCE(msk->pm.add_addr_accepted == 0)
... before decrementing the add_addr_accepted counter helped to find a
bug when running the "remove single subflow" subtest from the
mptcp_join.sh selftest.
Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the
subflow closure. Before this patch, and upon the reception of the
RM_ADDR, the other peer will then try to decrement this
add_addr_accepted. That's not correct because the attached subflows have
not been created upon the reception of an ADD_ADDR.
A way to solve that is to decrement the counter only if the attached
subflow was an MP_JOIN to a remote id that was not 0, and initiated by
the host receiving the RM_ADDR.
Fixes: d0876b2284 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-9-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding the following warning ...
WARN_ON_ONCE(msk->pm.local_addr_used == 0)
... before decrementing the local_addr_used counter helped to find a bug
when running the "remove single address" subtest from the mptcp_join.sh
selftests.
Removing a 'signal' endpoint will trigger the removal of all subflows
linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with
rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used
counter, which is wrong in this case because this counter is linked to
'subflow' endpoints, and here it is a 'signal' endpoint that is being
removed.
Now, the counter is decremented, only if the ID is being used outside
of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and
if the ID is not 0 -- local_addr_used is not taking into account these
ones. This marking of the ID as being available, and the decrement is
done no matter if a subflow using this ID is currently available,
because the subflow could have been closed before.
Fixes: 06faa22710 ("mptcp: remove multi addresses and subflows in PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-8-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This helper is confusing. It is in pm.c, but it is specific to the
in-kernel PM and it cannot be used by the userspace one. Also, it simply
calls one in-kernel specific function with the PM lock, while the
similar mptcp_pm_remove_addr() helper requires the PM lock.
What's left is the pr_debug(), which is not that useful, because a
similar one is present in the only function called by this helper:
mptcp_pm_nl_rm_subflow_received()
After these modifications, this helper can be marked as 'static', and
the lock can be taken only once in mptcp_pm_flush_addrs_and_subflows().
Note that it is not a bug fix, but it will help backporting the
following commits.
Fixes: 0ee4261a36 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-7-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If no subflows are attached to the 'subflow' endpoints that are being
flushed, the corresponding addr IDs will not be marked as available
again.
Mark all ID as being available when flushing all the 'subflow'
endpoints, and reset local_addr_used counter to cover these cases.
Note that mptcp_pm_remove_addrs_and_subflows() helper is only called for
flushing operations, not to remove a specific set of addresses and
subflows.
Fixes: 06faa22710 ("mptcp: remove multi addresses and subflows in PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-5-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If no subflow is attached to the 'subflow' endpoint that is being
removed, the addr ID will not be marked as available again.
Mark the linked ID as available when removing the 'subflow' endpoint if
no subflow is attached to it.
While at it, the local_addr_used counter is decremented if the ID was
marked as being used to reflect the reality, but also to allow adding
new endpoints after that.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-3-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If no subflow is attached to the 'signal' endpoint that is being
removed, the addr ID will not be marked as available again.
Mark the linked ID as available when removing the address entry from the
list to cover this case.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-1-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Up to the 'Fixes' commit, having an endpoint with both the 'signal' and
'subflow' flags, resulted in the creation of a subflow and an address
announcement using the address linked to this endpoint. After this
commit, only the address announcement was done, ignoring the 'subflow'
flag.
That's because the same bitmap is used for the two flags. It is OK to
keep this single bitmap, the already selected local endpoint simply have
to be re-used, but not via select_local_address() not to look at the
just modified bitmap.
Note that it is unusual to set the two flags together: creating a new
subflow using a new local address will implicitly advertise it to the
other peer. So in theory, no need to advertise it explicitly as well.
Maybe there are use-cases -- the subflow might not reach the other peer
that way, we can ask the other peer to try initiating the new subflow
without delay -- or very likely the user is confused, and put both flags
"just to be sure at least the right one is set". Still, if it is
allowed, the kernel should do what has been asked: using this endpoint
to announce the address and to create a new subflow from it.
An alternative is to forbid the use of the two flags together, but
that's probably too late, there are maybe use-cases, and it was working
before. This patch will avoid people complaining subflows are not
created using the endpoint they added with the 'subflow' and 'signal'
flag.
Note that with the current patch, the subflow might not be created in
some corner cases, e.g. if the 'subflows' limit was reached when sending
the ADD_ADDR, but changed later on. It is probably not worth splitting
id_avail_bitmap per target ('signal', 'subflow'), which will add another
large field to the msk "just" to track (again) endpoints. Anyway,
currently when the limits are changed, the kernel doesn't check if new
subflows can be created or removed, because we would need to keep track
of the received ADD_ADDR, and more. It sounds OK to assume that the
limits should be properly configured before establishing new
connections.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-5-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It sounds better to avoid wasting cycles and / or put extreme memory
pressure on the system by trying to create new subflows if it was not
possible to add a new item in the announce list.
While at it, a warning is now printed if the entry was already in the
list as it should not happen with the in-kernel path-manager. With this
PM, mptcp_pm_alloc_anno_list() should only fail in case of memory
pressure.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-4-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in the 'Fixes' commit, the port flag is only supported by
the 'signal' flag, and not by the 'subflow' one. Then if both the
'signal' and 'subflow' flags are set, the problem is the same: the
feature cannot work with the 'subflow' flag.
Technically, if both the 'signal' and 'subflow' flags are set, it will
be possible to create the listening socket, but not to establish a
subflow using this source port. So better to explicitly deny it, not to
create some confusions because the expected behaviour is not possible.
Fixes: 09f12c3ab7 ("mptcp: allow to use port and non-signal in set_flags")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-2-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There was a support for signal endpoints, but only when the endpoint's
flag was changed during a connection. If an endpoint with the signal and
backup was already present, the MP_JOIN reply was not containing the
backup flag as expected.
That's confusing to have this inconsistent behaviour. On the other hand,
the infrastructure to set the backup flag in the SYN + ACK + MP_JOIN was
already there, it was just never set before. Now when requesting the
local ID from the path-manager, the backup status is also requested.
Note that when the userspace PM is used, the backup flag can be set if
the local address was already used before with a backup flag, e.g. if
the address was announced with the 'backup' flag, or a subflow was
created with the 'backup' flag.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/507
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The 'backup' flag from mptcp_subflow_context structure is supposed to be
set only when the other peer flagged a subflow as backup, not the
opposite.
Fixes: 067065422f ("mptcp: add the outgoing MP_PRIO support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the per connection announced address counter is never
decreased. As a consequence, after connection establishment, if
the NL PM deletes an endpoint and adds a new/different one, no
additional subflow is created for the new endpoint even if the
current limits allow that.
Address the issue properly updating the signaled address counter
every time the NL PM removes such addresses.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the per-connection announced address counter is never
decreased. When the user-space PM is in use, this just affect
the information exposed via diag/sockopt, but it could still foul
the PM to wrong decision.
Add the missing accounting for the user-space PM's sake.
Fixes: 8b1c94da1e ("mptcp: only send RM_ADDR in nl_cmd_remove")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.
For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.
Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:
- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,
- the limit of 2 accepted ADD_ADDR would have then been reached.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremented as many times as the number of subflows connected to the
linked address ID, so it could have been 0, 1 or more than 1.
The "RmSubflow" is incremented after a local operation. In this case,
it is normal to tied it with the number of subflows that have been
actually removed.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. A broadcast IP address is now used instead: the
client will not be able to create a subflow to this address. The
consequence is that when receiving the RM_ADDR with the ID attached to
this broadcast IP address, no subflow linked to this ID will be found.
Fixes: 7a7e52e38a ("mptcp: add RM_ADDR related mibs")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nothing from protocol.h depends on mptcp_pm_gen.h, only code from
pm_netlink.c and pm_userspace.c depends on it.
So this include can be moved where it is needed to avoid a "unused
includes" warning.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240514011335.176158-8-martineau@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the lookup_by_id parameter of __lookup_addr() is true, it's the same
as __lookup_addr_by_id(), it can be replaced by __lookup_addr_by_id()
directly. So drop this parameter, let __lookup_addr() only looks up address
on the local address list by comparing addresses in it, not address ids.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-4-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In addition to returning the error value, this patch also sets an error
messages with GENL_SET_ERR_MSG or NL_SET_ERR_MSG_ATTR both for pm_netlink.c
and pm_userspace.c. It will help the userspace to identify the issue.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-3-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The headers net/tcp.h, net/genetlink.h and uapi/linux/mptcp.h are included
in protocol.h already, no need to include them again directly. This patch
removes these duplicate header inclusions.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-1-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch renames mptcp_pm_nl_get_addr_doit() as a dedicated in-kernel
netlink PM get addr function mptcp_pm_nl_get_addr(). and invoke a new
wrapper mptcp_pm_get_addr() in mptcp_pm_nl_get_addr_doit.
If a token is gotten in the wrapper, that means a userspace PM is used.
So invoke mptcp_userspace_pm_get_addr() to get addr in userspace PM list.
Otherwise, invoke mptcp_pm_nl_get_addr().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch renames mptcp_pm_nl_get_addr_dumpit() as a dedicated in-kernel
netlink PM dump addrs function mptcp_pm_nl_dump_addr(), and invoke a newly
added wrapper mptcp_pm_dump_addr() in mptcp_pm_nl_get_addr_dumpit().
Invoke in-kernel PM dump addrs function mptcp_pm_nl_dump_addr() or
userspace PM dump addrs function mptcp_userspace_pm_dump_addr() based on
whether the token parameter is passed in or not in the wrapper.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch exports struct mptcp_genl_family and mptcp_nl_fill_addr() helper
to allow them can be used in pm_userspace.c.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_pm_remove_addrs_and_subflows() is only used in pm_netlink.c, it's
no longer used in pm_userspace.c any more since the commit 8b1c94da1e
("mptcp: only send RM_ADDR in nl_cmd_remove"). So this patch changes it
to a static function.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fullmesh endpoints could end-up unexpectedly generating duplicate
subflows - same local and remote addresses - when multiple incoming
ADD_ADDR are processed before the PM creates the subflow for the local
endpoints.
Address the issue explicitly checking for duplicates at subflow
creation time.
To avoid a quadratic computational complexity, track the unavailable
remote address ids in a temporary bitmap and initialize such bitmap
with the remote ids of all the existing subflows matching the local
address currently processed.
The above allows additionally replacing the existing code checking
for duplicate entry in the current set with a simple bit test
operation.
Fixes: 2843ff6f36 ("mptcp: remote addresses fullmesh")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/435
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the previous patch, address the data race on
remote_id, adding the suitable ONCE annotations.
Fixes: bedee0b561 ("mptcp: address lookup improvements")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The local address id is accessed lockless by the NL PM, add
all the required ONCE annotation. There is a caveat: the local
id can be initialized late in the subflow life-cycle, and its
validity is controlled by the local_id_valid flag.
Remove such flag and encode the validity in the local_id field
itself with negative value before initialization. That allows
accessing the field consistently with a single read operation.
Fixes: 0ee4261a36 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just the same as userspace PM, a new parameter needs_id is added for
in-kernel PM mptcp_pm_nl_append_new_local_addr() too.
Add a new helper mptcp_pm_has_addr_attr_id() to check whether an address
ID is set from PM or not.
In mptcp_pm_nl_get_local_id(), needs_id is always true, but in
mptcp_pm_nl_add_addr_doit(), pass mptcp_pm_has_addr_attr_id() to
needs_it.
Fixes: efd5a4c04e ("mptcp: add the address ID assignment bitmap")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The token field is manipulated under the msk socket lock
and accessed lockless in a few spots, add proper ONCE annotation
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch replaces all the 'inet_sk_state_store()' calls under net/mptcp
with the new helper mptcp_set_state().
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/460
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As explained in commit e03781879a ("drop_monitor: Require
'CAP_SYS_ADMIN' when joining "events" group"), the "flags" field in the
multicast group structure reuses uAPI flags despite the field not being
exposed to user space. This makes it impossible to extend its use
without adding new uAPI flags, which is inappropriate for internal
kernel checks.
Solve this by adding internal flags (i.e., "GENL_MCAST_*") and convert
the existing users to use them instead of the uAPI flags.
Tested using the reproducers in commit 44ec98ea5e ("psample: Require
'CAP_NET_ADMIN' when joining "packets" group") and commit e03781879a
("drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group").
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the validity check for sending RM_ADDRs for userspace PM
in mptcp_pm_remove_addrs(), only send a RM_ADDR when the address is in the
anno_list or conn_list.
Fixes: 8b1c94da1e ("mptcp: only send RM_ADDR in nl_cmd_remove")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-3-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
in the current MPTCP control plane, all operations use a netlink
attribute of the same type "MPTCP_PM_ATTR". However, add/del/get/flush
operations only parse the first element in the message _ the one that
describes MPTCP endpoints (that was named MPTCP_PM_ATTR_ADDR and
mostly used in ADD_ADDR operations _ probably the similarity of "attr",
"addr" and "add" might cause some confusion to human readers).
Convert MPTCP from 'small_ops' to 'ops', thus allowing different attributes
for each single operation, hopefully makes all this clearer to human
readers.
- use a separate attribute set for add/del/get/flush address operation,
binary compatible with the existing one, to store the endpoint address.
MPTCP_PM_ENDPOINT_ADDR is added to the uAPI (with the same value as
MPTCP_PM_ATTR_ADDR) for these operations.
- convert mptcp_pm_ops[] and add policy files accordingly.
this prepares MPTCP control plane to be described as YAML spec.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/340
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-3-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
