The wq test was missing destroy(skel) part which was causing bpf progs to stay
loaded. That was causing test_progs to complain with
"Failed to unload bpf_testmod.ko from kernel: -11" message, but adding
destroy() wasn't enough, since wq callback may be delayed, so loop on unload of
bpf_testmod if errno is EAGAIN.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Fixes: 8290dba519 ("selftests/bpf: wq: add bpf_wq_start() checks")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure struct_ops rejects the registration of struct_ops types without
proper CFI stub functions.
bpf_test_no_cfi.ko is a module that attempts to register a struct_ops type
called "bpf_test_no_cfi_ops" with cfi_stubs of NULL and non-NULL value.
The NULL one should fail, and the non-NULL one should succeed. The module
can only be loaded successfully if these registrations yield the expected
results.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240222021105.1180475-3-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Currently, is_jit_enabled() is only used in test_progs, move it into
testing_helpers so that it can be used in test_verifier. While at it,
remove the second argument "0" of open() as Hou Tao suggested.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20240123090351.2207-2-yangtiezhu@loongson.cn
Various tests specify extra testing prog_flags when loading BPF
programs, like BPF_F_TEST_RND_HI32, and more recently also
BPF_F_TEST_REG_INVARIANTS. While BPF_F_TEST_RND_HI32 is old enough to
not cause much problem on older kernels, BPF_F_TEST_REG_INVARIANTS is
very fresh and unconditionally specifying it causes selftests to fail on
even slightly outdated kernels.
This breaks libbpf CI test against 4.9 and 5.15 kernels, it can break
some local development (done outside of VM), etc.
To prevent this, and guard against similar problems in the future, do
runtime detection of supported "testing flags", and only provide those
that host kernel recognizes.
Acked-by: Song Liu <song@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240109231738.575844-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Both test_verifier and test_progs use get_xlated_program(), so moving
the helper into testing_helpers.h to reuse it.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240105104819.3916743-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make sure to set BPF_F_TEST_SANITY_STRICT program flag by default across
most verifier tests (and a bunch of others that set custom prog flags).
There are currently two tests that do fail validation, if enforced
strictly: verifier_bounds/crossing_64_bit_signed_boundary_2 and
verifier_bounds/crossing_32_bit_signed_boundary_2. To accommodate them,
we teach test_loader a flag negation:
__flag(!<flagname>) will *clear* specified flag, allowing easy opt-out.
We apply __flag(!BPF_F_TEST_SANITY_STRICT) to these to tests.
Also sprinkle BPF_F_TEST_SANITY_STRICT everywhere where we already set
test-only BPF_F_TEST_RND_HI32 flag, for completeness.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231112010609.848406-12-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that we have un/load_bpf_testmod helpers in testing_helpers.h,
we can use it in other tests and save some lines.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Do not unload bpf_testmod in load_bpf_testmod, instead call
unload_bpf_testmod separatelly.
This way we will be able use un/load_bpf_testmod functions
in other tests that un/load bpf_testmod module.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We are about to use un/load_bpf_testmod functions in couple tests
and it's better to print output to stdout, so it's aligned with
tests ASSERT macros output, which use stdout as well.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Moving test_progs helpers to testing_helpers object so they can be
used from test_verifier in following changes.
Also adding missing ifndef header guard to testing_helpers.h header.
Using stderr instead of env.stderr because un/load_bpf_testmod helpers
will be used outside test_progs. Also at the point of calling them
in test_progs the std files are not hijacked yet and stderr is the
same as env.stderr.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Improve test selection logic when using -a/-b/-d/-t options.
The list of tests to include or exclude can now be read from a file,
specified as @<filename>.
The file contains one name (or wildcard pattern) per line, and
comments beginning with # are ignored.
These options can be passed multiple times to read more than one file.
Signed-off-by: Stephen Veiss <sveiss@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230427225333.3506052-3-sveiss@meta.com
Split the logic to insert new tests into test filter sets out from
parse_test_list.
Fix the subtest insertion logic to reuse an existing top-level test
filter, which prevents the creation of duplicate top-level test filters
each with a single subtest.
Signed-off-by: Stephen Veiss <sveiss@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230427225333.3506052-2-sveiss@meta.com
Currently, perf_event sample period in perf_event_stackmap is set too low
that the test fails randomly. Fix this by using the max sample frequency,
from read_perf_max_sample_freq().
Move read_perf_max_sample_freq() to testing_helpers.c. Replace the CHECK()
with if-printf, as CHECK is not available in testing_helpers.c.
Fixes: 1da4864c2b ("selftests/bpf: Add callchain_stackid")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230412210423.900851-2-song@kernel.org
If user explicitly overrides programs's type with
bpf_program__set_type() API call, we need to disassociate whatever
SEC_DEF handler libbpf determined initially based on program's SEC()
definition, as it's not goind to be valid anymore and could lead to
crashes and/or confusing failures.
Also, fix up bpf_prog_test_load() helper in selftests/bpf, which is
force-setting program type (even if that's completely unnecessary; this
is quite a legacy piece of code), and thus should expect auto-attach to
not work, yet one of the tests explicitly relies on auto-attach for
testing.
Instead, force-set program type only if it differs from the desired one.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230327185202.1929145-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use the new type-safe wrappers around bpf_obj_get_info_by_fd().
Fix a prog/map mixup in prog_holds_map().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230214231221.249277-6-iii@linux.ibm.com
Improve subtest selection logic when using -t/-a/-d parameters.
In particular, more than one subtest can be specified or a
combination of tests / subtests.
-a send_signal -d send_signal/send_signal_nmi* - runs send_signal
test without nmi tests
-a send_signal/send_signal_nmi*,find_vma - runs two send_signal
subtests and find_vma test
-a 'send_signal*' -a find_vma -d send_signal/send_signal_nmi* -
runs 2 send_signal test and find_vma test. Disables two send_signal
nmi subtests
-t send_signal -t find_vma - runs two *send_signal* tests and one
*find_vma* test
This will allow us to have granular control over which subtests
to disable in the CI system instead of disabling whole tests.
Also, add new selftest to avoid possible regression when
changing prog_test test name selection logic.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220409001750.529930-1-mykolal@fb.com
The function does not check that parsing_end is false after parsing
argument. Thus, if the final part of the argument is something like '4-',
which is invalid, parse_num_list() will discard it instead of returning
-EINVAL.
Before:
$ ./test_progs -n 2,4-
#2 atomic_bounds:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
After:
$ ./test_progs -n 2,4-
Failed to parse test numbers.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220406003622.73539-1-ytcoode@gmail.com
Switch from bpf_object__load_xattr() to bpf_object__load() and
kernel_log_level in bpf_object_open_opts.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-12-andrii@kernel.org
bpf_program__set_extra_flags has just been introduced so we can still
change it without breaking users.
This new interface is a bit more flexible (for example if someone wants
to clear a flag).
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211119180035.1396139-1-revest@chromium.org
After recent refactoring bpf_prog_test_load(), used across multiple
selftests, lost ability to specify extra log_level 1 or 2 (for -vv and
-vvv, respectively). Fix that problem by using bpf_object__load_xattr()
API that supports extra log_level flags. Also restore
BPF_F_TEST_RND_HI32 prog_flags by utilizing new bpf_program__set_extra_flags()
API.
Fixes: f87c1930ac ("selftests/bpf: Merge test_stub.c into testing_helpers.c")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211111051758.92283-3-andrii@kernel.org
Move testing prog and object load wrappers (bpf_prog_test_load and
bpf_test_load_program) into testing_helpers.{c,h} and get rid of
otherwise useless test_stub.c. Make testing_helpers.c available to
non-test_progs binaries as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-11-andrii@kernel.org
Add bpf_link__detach() testing to selftests for cgroup, netns, and xdp
bpf_links.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200731182830.286260-4-andriin@fb.com
Add testing_helpers.c, which will contain generic helpers for test runners and
tests needing some common generic functionality, like parsing a set of
numbers.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-2-andriin@fb.com
