Bit definitions for port-select got changed for TRANS_CLK_SEL &
TRANS_DDI_FUNC_CTL registers in TGL.
v2 (Lucas):
- Nuke TRANS_DDI_PORT_NONE since it's 0: we are already clearing
{TGL_,}TRANS_DDI_PORT_MASK (suggested by Ville)
- Also cover haswell_get_ddi_port_state() in intel_display.c that was
missing
- Define macros using the _SHIFT macros so we don't lose other users
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-3-lucas.demarchi@intel.com
According to the spec when initializing the display in TGL we should not
set PORT_CL_DW12 for the Aux channel of the combo PHYs. We will re-use the
power well hooks from ICL so only set this register on gen < 12.
v2: Generalize check for gen 12 (suggested by José)
v3: Rebase after enum phy introduction
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-2-lucas.demarchi@intel.com
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/gpu/drm/i915/gem/i915_gem_mman.c: In function ‘i915_gem_fault’:
drivers/gpu/drm/i915/gem/i915_gem_mman.c:342:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!i915_terminally_wedged(i915))
^
drivers/gpu/drm/i915/gem/i915_gem_mman.c:345:2: note: here
case -EAGAIN:
^~~~
drivers/gpu/drm/i915/gem/i915_gem_pages.c: In function ‘i915_gem_object_map’:
./include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:136:2: note: in expansion of macro ‘unlikely’
unlikely(__ret_warn_on); \
^~~~~~~~
drivers/gpu/drm/i915/i915_utils.h:49:25: note: in expansion of macro ‘WARN’
#define MISSING_CASE(x) WARN(1, "Missing case (%s == %ld)\n", \
^~~~
drivers/gpu/drm/i915/gem/i915_gem_pages.c:270:3: note: in expansion of macro ‘MISSING_CASE’
MISSING_CASE(type);
^~~~~~~~~~~~
drivers/gpu/drm/i915/gem/i915_gem_pages.c:272:2: note: here
case I915_MAP_WB:
^~~~
drivers/gpu/drm/i915/i915_gpu_error.c: In function ‘error_record_engine_registers’:
./include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:136:2: note: in expansion of macro ‘unlikely’
unlikely(__ret_warn_on); \
^~~~~~~~
drivers/gpu/drm/i915/i915_utils.h:49:25: note: in expansion of macro ‘WARN’
#define MISSING_CASE(x) WARN(1, "Missing case (%s == %ld)\n", \
^~~~
drivers/gpu/drm/i915/i915_gpu_error.c:1196:5: note: in expansion of macro ‘MISSING_CASE’
MISSING_CASE(engine->id);
^~~~~~~~~~~~
drivers/gpu/drm/i915/i915_gpu_error.c:1197:4: note: here
case RCS0:
^~~~
drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_get_fia_supported_lane_count’:
./include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:136:2: note: in expansion of macro ‘unlikely’
unlikely(__ret_warn_on); \
^~~~~~~~
drivers/gpu/drm/i915/i915_utils.h:49:25: note: in expansion of macro ‘WARN’
#define MISSING_CASE(x) WARN(1, "Missing case (%s == %ld)\n", \
^~~~
drivers/gpu/drm/i915/display/intel_dp.c:233:3: note: in expansion of macro ‘MISSING_CASE’
MISSING_CASE(lane_info);
^~~~~~~~~~~~
drivers/gpu/drm/i915/display/intel_dp.c:234:2: note: here
case 1:
^~~~
drivers/gpu/drm/i915/display/intel_display.c: In function ‘check_digital_port_conflicts’:
CC [M] drivers/gpu/drm/nouveau/nvkm/engine/disp/cursgv100.o
drivers/gpu/drm/i915/display/intel_display.c:12043:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (WARN_ON(!HAS_DDI(to_i915(dev))))
^
drivers/gpu/drm/i915/display/intel_display.c:12046:3: note: here
case INTEL_OUTPUT_DP:
^~~~
Also, notice that the Makefile is modified to stop ignoring
fall-through warnings. The -Wimplicit-fallthrough option
will be enabled globally in v5.3.
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/i915/display/icl_dsi.c: In function 'gen11_dsi_set_transcoder_timings':
drivers/gpu/drm/i915/display/icl_dsi.c:768:6: warning:
variable 'hfront_porch' set but not used [-Wunused-but-set-variable]
It is never used and can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719015136.103988-1-yuehaibing@huawei.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/i915/display/intel_sprite.c: In function 'g4x_sprite_check_scaling':
drivers/gpu/drm/i915/display/intel_sprite.c:1494:13: warning:
variable 'src_y' set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719024100.64738-1-yuehaibing@huawei.com
A single 32-bit PSR2 training pattern field follows the sixteen element
array of PSR table entries in the VBT spec. But, we incorrectly define
this PSR2 field for each of the PSR table entries. As a result, the PSR1
training pattern duration for any panel_type != 0 will be parsed
incorrectly. Secondly, PSR2 training pattern durations for VBTs with bdb
version >= 226 will also be wrong.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Cc: stable@vger.kernel.org #v5.2
Fixes: 88a0d9606a ("drm/i915/vbt: Parse and use the new field with PSR2 TP2/3 wakeup time")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111088
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204183
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: François Guerraz <kubrick@fgv6.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717223451.2595-1-dhinakaran.pandiyan@intel.com
On VLV/CHV there is some kind of linkage between the cdclk frequency
and the DP link frequency. The spec says:
"For DP audio configuration, cdclk frequency shall be set to
meet the following requirements:
DP Link Frequency(MHz) | Cdclk frequency(MHz)
270 | 320 or higher
162 | 200 or higher"
I suspect that would more accurately be expressed as
"cdclk >= DP link clock", and in any case we can express it like
that in the code because of the limited set of cdclk (200, 266,
320, 400 MHz) and link frequencies (162 and 270 MHz) we support.
Without this we can end up in a situation where the cdclk
is too low and enabling DP audio will kill the pipe. Happens
eg. with 2560x1440 modes where the 266MHz cdclk is sufficient
to pump the pixels (241.5 MHz dotclock) but is too low for
the DP audio due to the link frequency being 270 MHz.
v2: Spell out the cdclk and link frequencies we actually support
Cc: stable@vger.kernel.org
Tested-by: Stefan Gottwald <gottwald@igel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111149
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717114536.22937-1-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Although, DPLL4 enable and disable is associated with MGPLL1_ENABLE
register, we can use ICL_DPLL_CFGCR0/CR1 macros to access this dpll's
CR0 and CR1 registers by passing an id of 4 to these macros.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717021316.18610-1-vivek.kasireddy@intel.com
Right now we are aware of two cases that needs another hotplug retry:
- Unpowered type-c dongles
- HDMI slow unplug
Both have a complete explanation in the code to schedule another run
of the hotplug handler.
It could have more checks to just trigger the retry in those two
specific cases but why would sink signal a long pulse if there is
no change? Also the drawback of running the hotplug handler again
is really low and that could fix another cases that we are not
aware.
Also retrying for old DP ports(non-DDI) to make it consistent and not
cause CI failures if those systems are connected to chamelium boards
that will be used to simulate the issues reported in here.
v2: Also retrying for old DP ports(non-DDI)(Imre)
v4: Renamed INTEL_HOTPLUG_NOCHANGE to INTEL_HOTPLUG_UNCHANGED to keep
it consistent(Rodrigo)
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712005343.24571-2-jose.souza@intel.com
There is some scenarios that we are aware that sink probe can fail,
so lets add the infrastructure to let hotplug() hook to request
another probe after some time.
v2: Handle shared HPD pins (Imre)
v3: Rebased
v4: Renamed INTEL_HOTPLUG_NOCHANGE to INTEL_HOTPLUG_UNCHANGED to keep
it consistent(Rodrigo)
v5: Making the working queue used explicit through all the callers to
hotplug_work (Ville)
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712005343.24571-1-jose.souza@intel.com
Now that we distinguish between phy and port(ddi), mcc_port_to_ddc_pin
should use the phy, not the DDI, for determining DDC pins.
We're only converting the MCC function at the moment since EHL is the
only platform that has configurations where port!=phy.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712221641.21031-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Having taken the first step in encapsulating the functionality by moving
the related files under gt/, the next step is to start encapsulating by
passing around the relevant structs rather than the global
drm_i915_private. In this step, we pass intel_gt to intel_reset.c
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712192953.9187-1-chris@chris-wilson.co.uk
Some platforms may have Modular FIA. If Modular FIA is used in the SOC,
then Display Driver will access the additional instances of
FIA based on pre-assigned offset in GTTMADDR space.
Each Modular FIA instance has its own IOSF Sideband Port ID
and it houses only 2 Type-C Port. In SOC that has more than
two Type-C Ports, there are multiple instances of Modular FIA.
Gunit will need to use different destination ID when it access
different pair of Type-C Port.
The DFLEXDPSP register has Modular FIA bit starting on Tiger Lake. If
Modular FIA is used in the SOC, this register bit exists in all the
instances of Modular FIA. IOM FW is required to program only the MF bit
in first FIA instance that houses the Type-C Port 0 and Port 1, for
Display Driver to read from.
v2 (Lucas):
- Move all accesses to FIA to be contained in intel_tc.c, along with
display_fia that is now called tc_phy_fia
- Save the fia instance number on intel_digital_port, so we don't have
to query if modular FIA is used on every access
v3 (Lucas): Make function static
v4 (Lucas): Move enum phy_fia to the header and use it in
intel_digital_port (suggested by Ville)
v5 (Lucas): Add comment about the mapping between FIA and TC port
(suggested by Stuart)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712055706.12143-2-lucas.demarchi@intel.com
intel_atomic_commit() is not for use internally, but only as an entry
point from the core drm atomic helper (drm_atomic_commit).
Squelches the warning for:
drivers/gpu/drm/i915/display/intel_display.c:14148: warning: Function parameter or member '_state' not described in 'intel_atomic_commit'
drivers/gpu/drm/i915/display/intel_display.c:14148: warning: Excess function parameter 'state' description in 'intel_atomic_commit'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712134234.29893-1-chris@chris-wilson.co.uk
CH7511 doesn't update SINK_COUNT properly so in order to detect
the device as connected we have to ignore SINK_COUNT.
In order to have access to the quirk list early enough we
must move the drm_dp_read_desc() call to happen earlier.
We can also skip re-reading this on eDP since we know it
won't change.
Cc: David S. <david@majinbuu.com>
Cc: Peteris Rudzusiks <peteris.rudzusiks@gmail.com>
Tested-by: Peteris Rudzusiks <peteris.rudzusiks@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105406
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528140650.19230-2-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com> #irc
Similar to the "_release" case, consistently replace mixed
"_cleanup"/"_fini"/"_fini_hw" components found in names of functions
called from i915_driver_remove() with "_remove" or "_driver_remove"
suffixes for better code readability.
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-6-janusz.krzysztofik@linux.intel.com
Use the "_probe" nomenclature not only in i915_driver_probe() helper
name but also in other related function / variable names for
consistency. Only the userspace exposed name of a related module
parameter is left untouched.
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-4-janusz.krzysztofik@linux.intel.com
On TGL the port programming for combophy is very similar to ICL, so
adapt the callers to possibly use the different register values.
v2 (Lucas): Add TODO with about DPLL4 (requested by Ville)
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-21-lucas.demarchi@intel.com
Make the icl function generic so it is based on phy type and can be
applied to tgl as well.
I checked if this could not apply to EHL as well, but unfortunately
there the HPD and DDC/GMBUS pins for DDI C are mapped to TypeC Port 1
even though it doesn't have TC phy.
v2: don't add a separate function for TGL, but rather reuse the ICL one
(suggested by Rodrigo)
v3: rebase after the introduction of enum phy and use it for the
conversions
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-19-lucas.demarchi@intel.com
Add default GPIO pin mapping for all ports. Tiger Lake has 3 combophy
ports and 6 TC ports, gpio pin1-3 are mapped to combophy & pin9-14 are
mapped to TC ports.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-18-lucas.demarchi@intel.com
Previously, the recommended B credit for all platforms was 24 / number
of pipes, which would give 6 for newer platforms with 4 pipes. However 6
is not enough and we need 12 on these cases.
We also need a different BW credit for these platforms.
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-17-lucas.demarchi@intel.com
This patch initializes DDI PORT A, B & C for Tiger lake. Other
TC ports need to be initialized later once corresponding code is there.
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-15-lucas.demarchi@intel.com
There are 2 new additional typeC ports in Tiger Lake and PORT-C is now a
combophy port. This results in 6 typeC ports and 3 combophy ports.
These 6 TC ports can be DP alternate mode, DP over thunderbolt, native
DP on legacy DP connector or native HDMI on legacy connector.
v2: Rebase on new modular FIA code (Lucas)
v3: Also add new port in port_identifier(), even though it can't
possibly be used there (requested by José)
v4: Add conversion port->tc_port in helper function after introction of
phy namespace (Lucas)
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-13-lucas.demarchi@intel.com
Add a new pll array for Tiger Lake. The TC pll functions for type C will
be covered in later patches after its phy is implemented.
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-12-lucas.demarchi@intel.com
Add 2 new PLLs for additional TC ports. The names for the PLLs on TGL
changed, but most registers remained the same, like MGPLL5_ENABLE,
MGPLL6_ENABLE. So continue to use the name from ICL.
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-11-lucas.demarchi@intel.com
Add power well 5 to support 4th pipe and transcoder on TGL.
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-10-lucas.demarchi@intel.com
The patch adds the new power wells introduced by TGL (GEN 12) and
maps these to existing/new power domains. The changes for GEN 12 wrt
to GEN 11 are the following:
- Transcoder#EDP removed from power well#1 (Transcoder#A used in
low-power mode instead)
- Transcoder#A is now backed by power well#1 instead of power well#3
- The DDI#B/C combo PHY ports are now backed by power well#1 instead of
power well#3
- New power well#5 added for pipe#D functionality (TODO)
- 2 additional TC ports (TC#5-6) backed by power well#3, 2 port
specific IO power wells (only for the non-TBT modes) and 4 port
specific AUX power wells (2-2 for TBT vs. non-TBT modes)
- Power well#2 backs now VDSC/joining for pipe#A instead of VDSC for
eDP and MIPI DSI (TODO)
On TGL Port DDI#C changed to be a combo PHY (native DP/HDMI) and
BSpec has renamed ports DDI#D-F to TC#4-6 respectively. Thus on ICL we
have the following naming for ports:
- Combo PHYs (native DP/HDMI):
DDI#A-B
- TBT/non-TBT (TC altmode, native DP/HDMI) PHYs:
DDI#C-F
Starting from GEN 12 we have the following naming for ports:
- Combo PHYs (native DP/HDMI):
DDI#A-C
- TBT/non-TBT (TC altmode, native DP/HDMI) PHYs:
DDI TC#1-6
To save some space in the power domain enum the power domain naming in
the driver reflects the above change, that is power domains TC#1-3 are
added as aliases for DDI#D-F and new power domains are reserved for
TC#4-6.
v2 (Lucas):
- Separate out the bits and definitions for TGL from the ICL ones.
Fix use of TRANSCODER_EDP_VDSC, that is now the correct define since
we don't define TRANSCODER_A_VDSC power domain to spare a one bit in
the bitmask (suggested by Ville)
v3 (Lucas):
- Fix missing squashes on v2
- Rebase on renamed TRANSCODER_EDP_VDSC
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-9-lucas.demarchi@intel.com
On TGL the special EDP transcoder is gone and it should be handled by
transcoder A.
v2 (Lucas):
- Reuse POWER_DOMAIN_TRANSCODER_EDP_VDSC (suggested by Ville)
- Use crtc->dev since new_crtc_state->state may be NULL on atomic
commit (suggested by Maarten)
v3 (Lucas):
- Rename power domain so it's clear it can also be used for transcoder
A in TGL (requested by José and Manasi)
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-8-lucas.demarchi@intel.com
With 4:2:0 output the LS clock can be half of what it is with 4:4:4.
Make that happen.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710125851.3275-1-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Zero initialize val2 so that we don't pass stack garbage to
the pcode qgv read command. I suspect in this case pcode
just ignores the initial value in that registers, but better
safe than sorry.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710134937.25835-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The PFI credit programming performed during cdclk change on vlv/chv
requires access to a register in the disp2d power well. So far
we've abused pipe-A power domain for this, but now we have the
more appropriate "display core" domain so let's make use of it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190701161534.6671-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
The spec says:
"A value of 0 indicates that this buffer does not exist"
So we should not convert a hbuf_size of 0 into 1.
Also pull the relevant code into a helper to avoid making the
same mistake multiple times.
And while at it fix the debug prints to not say "hbuf_len" twice.
v2: s/%i/%u/ in the debug (Imre)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180312.31817-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Transition the remaining uses of intel_port_is_* over to the equivalent
intel_phy_is_* functions and drop the port functions.
v5: Fix a call in a debug function that's only called when
CONFIG_DRM_I915_DEBUG_RUNTIME_PM is on. (CI)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-5-matthew.d.roper@intel.com
Convert the code that operates directly on gen11 combo PHY's to use the
new namespace. Combo PHY registers are those named "ICL_PORT_*" plus
ICL_DPHY_CHKN.
Note that a lot of the PHY programming happens in the MIPI DSI code.
For clarity I've added a for_each_dsi_phy() to loop over the phys used
by DSI. Since DSI always uses A & B on gen11, port=phy in all cases so
it doesn't actually matter which form we use in the DSI code. I've used
the phy iterator in code that's explicitly working with the combo PHY,
but left the rest of the DSI code using the port iterator and namespace
to minimize patch deltas. We can switch the rest of the DSI code over
to use phy terminology later if this winds up being too confusing.
v6: Drop an include of drm/i915_drm.h; that was previously included just
for the definition of 'enum port' which this patch removes the need
for. (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-4-matthew.d.roper@intel.com
Although the register name implies that it operates on DDI's,
DPCLKA_CFGCR0_ICL actually needs to be programmed according to the PHY
that's in use. I.e., when using EHL's DDI-D on combo PHY A, the bits
described as "port A" in the bspec are what we need to set. The bspec
clarifies:
"[For EHL] DDID clock tied to DDIA clock, so DPCLKA_CFGCR0 DDIA
Clock Select chooses the PLL for both DDIA and DDID and drives
port A in all cases."
Also, since the CNL DPCLKA_CFGCR0 bit defines are still port-based, we
create separate ICL-specific defines that accept the PHY rather than
trying to share the same bit definitions between CNL and ICL.
v5: Make icl_dpclka_cfgcr0_clk_off() take phy rather than port. When
splitting the original patch the hunk to handle this wound up too
late in the series. (Sparse)
v6: Since we're already changing this code,
s/DPCLKA_CFGCR0_ICL/ICL_DPCLKA_CFGCR0/ for consistency. (Jose)
Bspec: 33148
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-3-matthew.d.roper@intel.com
Our past DDI-based Intel platforms have had a fixed DDI<->PHY mapping.
Because of this, both the bspec documentation and our i915 code has used
the term "port" when talking about either DDI's or PHY's; it was always
easy to tell what terms like "Port A" were referring to from the
context.
Unfortunately this is starting to break down now that EHL allows PHY-A
to be driven by either DDI-A or DDI-D. Is a setup with DDI-D driving
PHY-A considered "Port A" or "Port D?" The answer depends on which
register we're working with, and even the bspec doesn't do a great job
of clarifying this.
Let's try to be more explicit about whether we're talking about the DDI
or the PHY on gen11+ by using 'port' to refer to the DDI and creating a
new 'enum phy' namespace to refer to the PHY in use.
This patch just adds the new PHY namespace, new phy-based versions of
intel_port_is_*(), and a helper to convert a port to a PHY.
Transitioning various areas of the code over to using the PHY namespace
will be done in subsequent patches to make review easier. We'll remove
the intel_port_is_*() functions at the end of the series when we
transition all callers over to using the PHY-based versions.
v2:
- Convert a few more 'port' uses to 'phy.' (Sparse)
v3:
- Switch DDI_CLK_SEL() back to 'port.' (Jose)
- Add a code comment clarifying why DPCLKA_CFGCR0_ICL needs to use PHY
for its bit definitions, even though the register description is
given in terms of DDI.
- To avoid confusion, switch CNL's DPCLKA_CFGCR0 defines back to using
port and create separate ICL+ definitions that work in terms of PHY.
v4:
- Rebase and resolve conflicts with Imre's TC series.
- This patch now just adds the namespace and a few convenience
functions; the important changes are now split out into separate
patches to make review easier.
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-2-matthew.d.roper@intel.com
PORT_TX_DFLEXDPMLE1 is a FIA register so move it to intel_tc.c where we
access other FIA registers. In Tiger Lake we have multiple/modular FIAs
so it makes sense to start moving all access to their registers to a
common place.
While at it, make it clear that we will only ever call this function
for ports with TC phy. Previously we were relying on tc_mode being
TC_PORT_TBT_ALT for combo phy ports. However it's confusing since in
this same function we have checks for is_tc_port. Also, if we manage to
make each phy access only their own field, we may in future add them as
a union inside intel_digital_port.
v2: Fix coding style while moving the code
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708172815.6814-4-lucas.demarchi@intel.com
Separate local includes with a blank line and sort the groups
alphabetically.
v2: don't make intel_tc.h be the first include
v3: don't make local includes be included first
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709155403.29370-1-lucas.demarchi@intel.com
