tas2770_reset is called during i2c probe. The reset calls the
snd_soc_component_write which depends on the tas2770->component being
available. The component pointer is not set until codec_probe so move
the reset to the codec_probe after the pointer is set.
Fixes: 1a476abc72 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid the IO error, we need to cancel the delayed work and wait for it to finish.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200921094244.31869-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the TAS2564 as a supported amplifier. This amplifier is register,
bitmap and feature compatible to the TAS2562.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918150130.21015-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is a collection of fixes for 5.9. All look small and are
nothing scary. The majority of changes are about ASoC driver-
specific fixes, while there are a couple of ASoC core fixes (DAI
lookup and lockdep stuff) and usual HD-audio quirks.
-----BEGIN PGP SIGNATURE-----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=VuAQ
-----END PGP SIGNATURE-----
Merge tag 'sound-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here is a collection of fixes for 5.9. All look small and are nothing
scary.
The majority of changes are about ASoC driver- specific fixes, while
there are a couple of ASoC core fixes (DAI lookup and lockdep stuff)
and usual HD-audio quirks"
* tag 'sound-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek - The Mic on a RedmiBook doesn't work
ASoC: tlv320adcx140: Wake up codec before accessing register
ASoC: core: Do not cleanup uninitialized dais on soc_pcm_open failure
ALSA: hda: fixup headset for ASUS GX502 laptop
ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN Converter9 2-in-1
ASoC: Intel: haswell: Fix power transition refactor
ASoC: tlv320adcx140: Fix accessing uninitialized adcx140->dev
ASoC: wm8994: Ensure the device is resumed in wm89xx_mic_detect functions
ASoC: wm8994: Skip setting of the WM8994_MICBIAS register for WM1811
ASoC: meson: axg-toddr: fix channel order on g12 platforms
ASoC: soc-core: add snd_soc_find_dai_with_mutex()
ASoC: qcom: common: Fix refcount imbalance on error
ASoC: rt700: Fix return check for devm_regmap_init_sdw()
ASoC: rt715: Fix return check for devm_regmap_init_sdw()
ASoC: rt711: Fix return check for devm_regmap_init_sdw()
ASoC: rt1308-sdw: Fix return check for devm_regmap_init_sdw()
ASoC: max98373: Fix return check for devm_regmap_init_sdw()
ASoC: ti: fixup ams_delta_mute() function name
ASoC: pcm3168a: ignore 0 Hz settings
ASoC: Intel: tgl_max98373: fix a runtime pm issue in multi-thread case
...
Add support to configure the GPIO pin to the specific configuration.
The GPIO pin can be configured as GPO, IRQ, SDOUT2, PDMCLK, MICBASE_EN,
GPI, MCLK, SDIN, PDMDIN1, PDMDIN2, PDMDIN3 or PDMDIN4 and the output
drive can be configured with various configuration.
Signed-off-by: Camel Guo <camelg@axis.com>
Link: https://lore.kernel.org/r/20200918114025.18205-2-camel.guo@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Ak4458 can't support DSD512 format, but ak4497 can, so add
a new enum variable (enum ak4458_type) in ak4458_drvdata to
distinguish these two platforms.
Ak4497 has two kinds of DSD input pin, it can be selected by
the dsd-path property from DT.
In hw_params(), bit clock is calculated according to different
DSD format (DSD64, DSD128, DSD256, DSD512), then registers
are configured.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1600178220-28973-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add code to allow the ASI Tx output to be placed into High-z mode
during unused ASI cycles. This allows for other devices that may be on
the bus to drive the ASI out. By default the 320adcx140 sends 0's for
unused cycles.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200915190606.1744-4-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid the actual PLL settings to differ from the state expected by
the clock driver, the codec should only be fully reset before the clocks
are registered. But we also need to ensure that the software reset
happens at all before clock registration, as not all boards have a reset
GPIO.
Move the software reset from aic32x4_component_probe() to
aic32x4_probe() and reorder the reset and registration sequence:
1. Reset via GPIO (if available)
2. Reset via software
3. Register component
4. Register clocks
Note that aic32x4_component_probe() is only called after aic32x4_probe()
has finished, so the reset in aic32x4_component_probe() was happening too
late.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20200902133043.19504-2-matthias.schiffer@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The regulators need to be disabled in the aic32x4_register_clocks()
failure case as well.
Fixes: 9d4befff5a ("ASoC: codec: tlv3204: Moving GPIO reset and add ADC reset")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20200902133043.19504-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the BCLK inversion for DSP modes
This is how it is defined by ASoC:
* BCLK:
* - "normal" polarity means signal is available at rising edge of BCLK
* - "inverted" polarity means signal is available at falling edge of BCLK
The adcx140 defines the BCLK edge based on coding type.
The PCM (DSP_A/B) should drive on rising and sample on falling edge, so
from ASoC pov, it is IB_NF. But from the codec pov if it is configured in
DSP mode, then the BCLK should not be inverted, defaults to the coding
standard.
For i2s, it is NB_NF from ASoC pov (drive on falling, sample on rising).
>From the codec's pov BCLK should not invert either, as this is the default
for the coding.
So, inversion must take the format into account:
IB_NF + DSP_A/B == the codec bclk inversion should be disabled
NB_NF + DSP_A/B == the codec bclk inversion should be enabled
NB_NF + I2S == the codec bclk inversion should be disabled
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200915190606.1744-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It was observed that if the device was active and register writes were
performed there were some unwanted behaviors particularly when writing
the word length and some filter options. So when writing to the device
the device should be placed in sleep mode and then exit sleep mode once
the register update is complete.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200915190606.1744-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to its datasheet, the digital gain should be -100 dB when
CHx_DVOL is 1 and 27 dB when CHx_DVOL is 255. But with the current
dig_vol_tlv, "Digital CHx Out Volume" shows 27.5 dB if CHx_DVOL is 255
and -95.5 dB if CHx_DVOL is 1. This commit fixes this bug.
Fixes: 689c7655b5 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Signed-off-by: Camel Guo <camelg@axis.com>
Link: https://lore.kernel.org/r/20200908090417.16695-1-camel.guo@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds rt1015p codec driver.
Rt1015p is a rt1015 variant.
- It doesn't support I2C.
- It only supports S24, 48kHz, 64FS.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200910042949.3795682-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The parity calculation is not reset on a Severe Reset, which leads to
misleading/harmless errors reported on startup. The addition of a
quirk helps filter out such errors while leaving the error checks on
in steady-state.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200908134521.6781-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a slave-level property and program the SCP_INT1_MASK as desired by
the codec driver. Since there is no DisCo property this has to be an
implementation-specific firmware property or hard-coded in the driver.
The only functionality change is that implementation-defined
interrupts are no longer set for amplifiers - those interrupts are
typically for jack detection or acoustic event detection/hotwording.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200908134521.6781-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to its datasheet, after reset this codec goes into sleep
mode. In this mode, any register accessing should be avoided except for
exiting sleep mode. Hence this commit moves SLEEP_CFG access before any
register accessing.
Signed-off-by: Camel Guo <camelg@axis.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200908083521.14105-2-camel.guo@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mt6359 platform device is instantiated by mfd_add_devices(). In the
case, dev->of_node is NULL so that mt6359_parse_dt() always fails to
parse the desired DT properties.
Gets the DT properties via dev->parent->of_node.
Fixes: 8061734ab6 ("ASoC: mediatek: mt6359: add codec driver")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200908070044.1142644-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
port_ready will be changed to a fixed array in sdw.h and all initialization
work will be done at soundwire side in the following patch. So remove them
from codec drivers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200831134318.11443-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In adcx140_i2c_probe, adcx140->dev is accessed before its
initialization. This commit fixes this bug.
Fixes: 689c7655b5 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Camel Guo <camel.guo@axis.com>
Link: https://lore.kernel.org/r/20200901135736.32036-1-camel.guo@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe of rt5682 is pretty slow. A quick measurement shows that it
takes ~650 ms on at least one board. There's no reason to block all
other drivers waiting for this probe to finish. Set the flag to allow
other drivers to probe while we're probing.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200828162005.1.I4f67f494c4f759b0e5c7f487e040dfdcf16e0876@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
When the wm8958_mic_detect, wm8994_mic_detect functions get called from
the machine driver, e.g. from the card's late_probe() callback, the CODEC
device may be PM runtime suspended and any regmap writes have no effect.
Add PM runtime calls to these functions to ensure the device registers
are updated as expected.
This suppresses an error during boot
"wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec"
caused by the regmap access error due to the cache_only flag being set.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200827173357.31891-2-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The WM8994_MICBIAS register is not available in the WM1811 CODEC so skip
initialization of that register for that device.
This suppresses an error during boot:
"wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec"
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200827173357.31891-1-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the audio routing map to enable the digital mic paths when the
analog mic paths are not enabled.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200828112855.10112-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Changing filter type without disabling codec results in filter
malfunction. Disable codec when changing filter type.
Signed-off-by: Pavel Dobias <dobias@2n.cz>
Link: https://lore.kernel.org/r/20200827102528.29677-1-dobias@2n.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on
failure which should be checked with IS_ERR. Also use PTR_ERR for
returning error codes.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: 7d2a5f9ae4 ("ASoC: rt700: add rt700 codec driver")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200826163340.3249608-6-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on
failure which should be checked with IS_ERR. Also use PTR_ERR for
returning error codes.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: d1ede0641b ("ASoC: rt715: add RT715 codec driver")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200826163340.3249608-5-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on
failure which should be checked with IS_ERR. Also use PTR_ERR for
returning error codes.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: 320b8b0d13 ("ASoC: rt711: add rt711 codec driver")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200826163340.3249608-4-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on
failure which should be checked with IS_ERR. Also use PTR_ERR for
returning error codes.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: a87a6653a2 ("ASoC: rt1308-sdw: add rt1308 SdW amplifier driver")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200826163340.3249608-3-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on
failure which should be checked with IS_ERR. Also use PTR_ERR for
returning error codes.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: 56a5b7910e ("ASoC: codecs: max98373: add SoundWire support")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200826163340.3249608-2-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ARRAY_SIZE() is the number of the elements but we want to use the
number of bytes. Fortunately, in this case the value is the same so it
doesn't affect runtime.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200825104623.GA278587@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Some sound card try to set 0 Hz as reset, but it is impossible.
This patch ignores it to avoid error return.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6yjy5sy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series updates the tables used to select SoundWire configurations
for CometLake and TigerLake, and adds support for SDCA (SoundWire
Device Class for Audio) codecs in the common machine driver. These
codec drivers are still being tested on early silicon/boards and will
be contributed at a later time.
For TigerLake Chromebooks a new DMI quirk is added, as well as a means
to override the topology names. A pm_runtime fix is also provided to
deal with playback/capture dependencies with an amplifier w/
feedback. I also included a minor codec correction for the TGL
amplifier.
Bard Liao (5):
ASoC: Intel: modify SoundWire version id in acpi match table
ASoC: Intel: sof_sdw: check SoundWire version when matching codec
ASoC: Intel: sof_sdw: rename id as part_id
ASoC: Intel: sof_sdw: add rt711 rt1316 rt714 SDCA codec support.
ASoC: Intel: sof_sdw: clean-up inclusion of header files
Pierre-Louis Bossart (5):
ASoC: Intel: soc-acpi: cnl: add support for rt5682 on SoundWire link2
ASoC: Intel: sof-soundwire: add support for rt5682 on link2
ASoC: Intel: soc-acpi: mirror CML and TGL configurations
ASoC: Intel: soc-acpi: add support for SDCA boards
ASoC: codecs: max98373-sdw: add missing test on resume
Rander Wang (2):
ASoC: Intel: tgl_max98373: fix a runtime pm issue in multi-thread case
ASoC: Intel: sof_sdw: Add support for product Ripto
Sathyanarayana Nujella (2):
ASoC: Intel: sof_rt5682: override quirk data for tgl_max98373_rt5682
ASoC: SOF: Add topology filename override based on dmi data match
sound/soc/codecs/max98373-sdw.c | 3 +
sound/soc/intel/boards/Kconfig | 3 +
sound/soc/intel/boards/Makefile | 7 +-
sound/soc/intel/boards/sof_maxim_common.c | 7 +-
sound/soc/intel/boards/sof_rt5682.c | 13 ++
sound/soc/intel/boards/sof_sdw.c | 98 +++++++---
sound/soc/intel/boards/sof_sdw_common.h | 22 ++-
sound/soc/intel/boards/sof_sdw_dmic.c | 1 +
sound/soc/intel/boards/sof_sdw_max98373.c | 2 +
sound/soc/intel/boards/sof_sdw_rt1308.c | 2 +
sound/soc/intel/boards/sof_sdw_rt1316.c | 113 ++++++++++++
sound/soc/intel/boards/sof_sdw_rt5682.c | 2 +
sound/soc/intel/boards/sof_sdw_rt700.c | 2 +
sound/soc/intel/boards/sof_sdw_rt711.c | 2 +
sound/soc/intel/boards/sof_sdw_rt711_sdca.c | 174 ++++++++++++++++++
sound/soc/intel/boards/sof_sdw_rt715_sdca.c | 42 +++++
.../intel/common/soc-acpi-intel-cml-match.c | 79 +++++++-
.../intel/common/soc-acpi-intel-cnl-match.c | 33 +++-
.../intel/common/soc-acpi-intel-icl-match.c | 10 +-
.../intel/common/soc-acpi-intel-tgl-match.c | 165 ++++++++++++++++-
sound/soc/sof/intel/hda.c | 8 +-
sound/soc/sof/sof-pci-dev.c | 24 +++
22 files changed, 764 insertions(+), 48 deletions(-)
create mode 100644 sound/soc/intel/boards/sof_sdw_rt1316.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt711_sdca.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt715_sdca.c
base-commit: fcea8b023a
--
2.25.1
"AVDD" is for analog power supply, "DVDD" is for digital power
supply, they can improve the power management.
As the regulator is enabled in pm runtime resume, which is
behind the component driver probe, so accessing registers in
component driver probe will fail. Fix this issue by enabling
regcache_cache_only after pm_runtime_enable.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1598190877-9213-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All existing SoundWire codecs follow the same pattern on resume,
except for this codec which doesn't test if the hardware is
initialized.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200821195603.215535-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of small fixes over several drivers, but all are driver-
specific and nothing looks scary. Slightly large changes are seen in
ASoC qcom driver for the bugs that were revealed by the recent ASoC
core change to report the invalid register access errors. Also ASoC
fsl got a slight intensive change for the distortion fix. Others are
only trivial fixes or device-specific quirks.
-----BEGIN PGP SIGNATURE-----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=T8Rb
-----END PGP SIGNATURE-----
Merge tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes over several drivers, but all are driver-
specific and nothing looks scary.
Slightly large changes are seen in ASoC qcom driver for the bugs that
were revealed by the recent ASoC core change to report the invalid
register access errors. Also ASoC fsl got a slight intensive change
for the distortion fix.
Others are only trivial fixes or device-specific quirks"
* tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda: avoid reset of sdo_limit
ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion
ALSA: usb-audio: ignore broken processing/extension unit
ASoC: intel: Fix memleak in sst_media_open
ASoC: wm8994: Avoid attempts to read unreadable registers
ASoC: msm8916-wcd-analog: fix register Interrupt offset
ASoC: wm8994: Prevent access to invalid VU register bits on WM1811
ALSA: hda/realtek: Add model alc298-samsung-headphone
ALSA: usb-audio: Update documentation comment for MS2109 quirk
ALSA: isa: fix spelling mistakes in the comments
ALSA: usb-audio: Add capture support for Saffire 6 (USB 1.1)
ALSA: hda/realtek: Add quirk for Samsung Galaxy Flex Book
ASoC: q6routing: add dummy register read/write function
ASoC: q6afe-dai: mark all widgets registers as SND_SOC_NOPM
ASoC: Make soc_component_read() returning an error code again
ASoC: amd: Replacing component->name with codec_dai->name.
ASoC: fsl: Fix unused variable warning
ASoC: tegra: tegra210_i2s: Fix compile warning with CONFIG_PM=n
ASoC: tegra: tegra210_dmic: Fix compile warning with CONFIG_PM=n
ASoC: tegra: tegra210_ahub: Fix compile warning with CONFIG_PM=n
...
Previous improvements around handling device and codec level
probe functionality added the possibility of the voltage level
being undefined for the scenario where the IO voltage retrieved
from the regulator supply was below 1.2V, whereas previously the
code defaulted to the 2.5V to 3.6V range in that case. This
commit restores the default value to avoid this happening.
Fixes: aa5b18d1c2 ("ASoC: da7219: Move soft reset handling to codec level probe")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200821142259.C2ECE3FB96@swsrvapps-01.diasemi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add version and class information explicitly to prepare for support
for new devices.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200818141435.29205-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It seems the datasheet has never used the word slave for this error
status bit and has always used the term address error. So update the
driver to match the datasheets and also in the process align a bit
better with avoiding the use of such words where possible.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200818160126.4852-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch set reorganises and fixes device and codec level probe/remove
handling within the driver, to allow clean probe and remove at the codec level.
This set relates to an issue raised by Yong Zhi where a codec level re-probe
would fail due to clks still being registered from the previous instantiation.
In addition some improvements around regulator handling and soft reset have
also been included.
Adam Thomson (3):
ASoC: da7219: Move required devm_* allocations to device level code
ASoC: da7219: Move soft reset handling to codec level probe
ASoC: da7219: Fix clock handling around codec level probe
sound/soc/codecs/da7219-aad.c | 85 +++++---
sound/soc/codecs/da7219-aad.h | 3 +
sound/soc/codecs/da7219.c | 493 +++++++++++++++++++++++-------------------
sound/soc/codecs/da7219.h | 1 +
4 files changed, 328 insertions(+), 254 deletions(-)
--
1.9.1
This patch series enables some features on the tlv3204 codec and also fixes some issues faced while testing
v2: Fixed the build error from snd_soc_component_read32
v1: initial ASoC: codec: tlv3204: Codec workaround series
Michael Sit Wei Hong (3):
ASoC: codec: tlv3204: Enable 24 bit audio support
ASoC: codec: tlv3204: Increased maximum supported channels
ASoC: codec: tlv3204: Moving GPIO reset and add ADC reset
sound/soc/codecs/tlv320aic32x4.c | 60 +++++++++++++++++++++++---------
1 file changed, 44 insertions(+), 16 deletions(-)
--
2.17.1
This patch series drops a printk message down to dev_dbg() because it
was noisy and then migrates this driver to use clk_hw based APIs instead
of clk based APIs because this device is a clk provider, not a clk
consumer. I've only lightly tested the last two patches but I don't have
all combinations of clks for this device.
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Shuming Fan <shumingf@realtek.com>
Stephen Boyd (3):
ASoC: rt5682: Use dev_dbg() in rt5682_clk_check()
ASoC: rt5682: Drop usage of __clk_get_name()
ASoC: rt5682: Use clk_hw based APIs for registration
sound/soc/codecs/rt5682.c | 73 ++++++++++++---------------------------
sound/soc/codecs/rt5682.h | 2 --
2 files changed, 23 insertions(+), 52 deletions(-)
Based on the last patch to this driver in linux-next.
base-commit: 6301adf942
--
Sent by a computer, using git, on the internet
This allows solutions like ALSA UCM to utilize hardware mono downmix
for cases where mono output to a single speaker is desired only in
specific situations (like on a mobile phone).
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/3662154.EqNIRYjrc8@pliszka
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow recommendation in Documentation/scheduler/completion.rst and
use macro to declare local 'struct completion'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200813175442.59067-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"AVDD" is for analog power supply, "DVDD" is for digital power
supply, they can improve the power management.
As the regulator is enabled in pm runtime resume, which is
behind the component driver probe, so accessing registers in
component driver probe will fail. Fix this issue by enabling
regcache_cache_only after pm_runtime_enable.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1597397561-2426-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
