DP Specification for DP2.0 to HDMI2.1 Pcon specifies support for conversion
of colorspace from RGB to YCbCr.
https://groups.vesa.org/wg/DP/document/previewpdf/15651
This patch adds the relavant registers and helper functions to
get the capability and set the color conversion bits for rgb->ycbcr
conversion through PCON.
v2: As suggested in review comments:
-Fixed bug in the check condition in a drm_helper as reported by
Dan Carpenter and Kernel test robot. (Dan Carepenter)
-Modified the color-conversion cap helper function, to accommodate
BT709 and BT2020 colorspace. (Uma Shankar)
-Added spec details for the new cap for color conversion. (Uma Shankar)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-8-ankit.k.nautiyal@intel.com
This patch adds registers for getting DSC encoder capability for
a HDMI2.1 PCon. It also addes helper functions to configure
DSC between the PCON and HDMI2.1 sink.
v2: Corrected offset for DSC encoder bpc and minor changes.
Also added helper functions for getting pcon dsc encoder capabilities
as suggested by Uma Shankar.
v3: Only setting the DSC bits for the Protocol Converter control
registers, avoiding overwritining color conversion bits.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v2)
[Jani: Fixed checkpatch BLOCK_COMMENT_STYLE.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-7-ankit.k.nautiyal@intel.com
There are specific DPCDs defined for detecting link failures between
the PCON and HDMI sink and check the link status. In case of link
failure, PCON will communicate the same using an IRQ_HPD to source.
HDMI sink would have indicated the same to PCON using SCDC interrupt
mechanism. While source can always read final HDMI sink's status using
I2C over AUX, it is easier and faster to read the PCONs already read
HDMI sink status registers.
This patch adds the DPCDs required for link failure detection and
provide a helper function for printing error count/lane which might
help in debugging the link failure issues.
v2: Addressed comments from Uma Shankar:
-rephrased the commit message, as per the code.
-fixed styling issues
-added documentation for the helper function.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
[Jani: Fixed checkpatch PARENTHESIS_ALIGNMENT.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-6-ankit.k.nautiyal@intel.com
This patch adds support for configuring a PCON device,
connected as a DP branched device to enable FRL Link training
with a HDMI2.1 + sink.
v2: Fixed typos and addressed other review comments from Uma Shankar.
-changed the commit message for better clarity (Uma Shankar)
-removed unnecessary argument supplied to a drm helper function.
-fixed return value for max frl read from pcon.
v3: Removed DPCD 0x3035 for MAX Sink FRL b/w as per new version of spec.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-5-ankit.k.nautiyal@intel.com
This patch parses HFVSDB fields for DSC1.2 capabilities of an
HDMI2.1 sink. These fields are required by a source to understand the
DSC capability of the sink, to set appropriate PPS parameters,
before transmitting compressed data stream.
v2: Addressed following issues as suggested by Uma Shankar:
-Added a new struct for hdmi dsc cap
-Fixed bugs in macros usage.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
[Jani: Fixed checkpatch PARENTHESIS_ALIGNMENT.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-4-ankit.k.nautiyal@intel.com
Update copyrights for files that have gotten some major rewrites lately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no point in duplicating the file name in the top of the file
comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
fs/block_dev.c is a pretty integral part of the block layer, so make
sure it is mentioned in MAINTAINERS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch parses MAX_FRL field to get the MAX rate in Gbps that
the HDMI 2.1 panel can support in FRL mode. Source need this
field to determine the optimal rate between the source and sink
during FRL training.
v2: Fixed minor bugs, and removed extra wrapper function (Uma Shankar)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
[Jani: Fixed checkpatch FROM_SIGN_OFF_MISMATCH, PARENTHESIS_ALIGNMENT.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-3-ankit.k.nautiyal@intel.com
The HDMI2.1 extends HFVSDB (HDMI Forum Vendor Specific
Data block) to have fields related to newly defined methods of FRL
(Fixed Rate Link) levels, number of lanes supported, DSC Color bit
depth, VRR min/max, FVA (Fast Vactive), ALLM etc.
This patch adds the new HFVSDB fields that are required for
HDMI2.1.
v2: Minor fixes + consistent naming for DPCD register masks
(Uma Shankar)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
[Jani: Fixed checkpatch FROM_SIGN_OFF_MISMATCH.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-2-ankit.k.nautiyal@intel.com
This Acer Veriton N4640G/N6640G/N2510G desktops have 2 headphone
jacks(front and rear), and a separate Mic In jack.
The rear headphone jack is actually a line out jack but always silent
while playing audio. The front 'Mic In' also fails the jack sensing.
Apply the ALC269_FIXUP_LIFEBOOK to have all audio jacks to work as
expected.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201222150459.9545-2-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Quanta NL3 laptop has both a headphone output jack and a headset
jack, on the right edge of the chassis.
The pin information suggests that both of these are at the Front.
The PulseAudio is confused to differentiate them so one of the jack
can neither get the jack sense working nor the audio output.
The ALC269_FIXUP_LIFEBOOK chained with ALC269_FIXUP_QUANTA_MUTE can
help to differentiate 2 jacks and get the 'Auto-Mute Mode' working
correctly.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201222150459.9545-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* acpi-scan:
ACPI: scan: Add Intel Baytrail Mailbox Device to acpi_ignore_dep_ids
ACPI: scan: Avoid unnecessary second pass in acpi_bus_scan()
ACPI: scan: Defer enumeration of devices with _DEP lists
ACPI: scan: Evaluate _DEP before adding the device
* acpi-pnp:
ACPI: PNP: compare the string length in the matching_id()
* acpi-sleep:
ACPI: PM: s2idle: Move x86-specific code to the x86 directory
ACPI: PM: s2idle: Add AMD support to handle _DSM
When waiting for the submit, before checking the status of the request,
kick the tasklet to make sure we are processing the submission. This
speeds up submission if we are using any tasklet suppression for
secondary requests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222113536.3775-3-chris@chris-wilson.co.uk
Make sure that the request has been submitted to HW before we begin our
wait. This reduces our reliance on the semaphore yield interrupt driving
the preemption request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222113536.3775-2-chris@chris-wilson.co.uk
We assume that the contents of the HWSP are lost across suspend, and so
upon resume we must restore critical values such as the timeline seqno.
Keep track of every timeline allocated that uses the HWSP as its storage
and so we can then reset all seqno values by walking that list.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222104242.10993-1-chris@chris-wilson.co.uk
VIRTIO itself has no dependencies and therefore can easily be just
select'ed, instead of depending on it. The current depends on causes
any others trying to select VIRTIO to fail like this:
drivers/gpu/drm/Kconfig:74:error: recursive dependency detected!
drivers/gpu/drm/Kconfig:74: symbol DRM_KMS_HELPER is selected by DRM_VIRTIO_GPU
drivers/gpu/drm/virtio/Kconfig:2: symbol DRM_VIRTIO_GPU depends on VIRTIO
drivers/virtio/Kconfig:2: symbol VIRTIO is selected by GPIO_VIRTIO
drivers/gpio/Kconfig:1618: symbol GPIO_VIRTIO depends on GPIOLIB
drivers/gpio/Kconfig:14: symbol GPIOLIB is selected by I2C_MUX_LTC4306
drivers/i2c/muxes/Kconfig:47: symbol I2C_MUX_LTC4306 depends on I2C
drivers/i2c/Kconfig:8: symbol I2C is selected by FB_DDC
drivers/video/fbdev/Kconfig:63: symbol FB_DDC depends on FB
drivers/video/fbdev/Kconfig:12: symbol FB is selected by DRM_KMS_FB_HELPER
drivers/gpu/drm/Kconfig:80: symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER
It seems that having both 'depends on' as well as 'select' on the same symbol
sends us into big trouble, and Kconfig can't break up the circular dependency
(note that in the tested configuration, neither I2C, FB or DRM are enabled at
all). Perhaps we could consider this a bug in Kconfig, but the trouble can
easily be circumvented by changing 'depends on' into 'select'.
DRM_VIRTIO_GPU also depends on VIRTIO_MENU, so even after this change, that
option will only show up if the user already enabled virtio in the config.
This change didn't cause any changes in the .config after menuconfig run,
so we should be completely safe here.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Reviewed-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201204131221.2827-1-info@metux.net
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I tried to fix this for real, but it's very sprawling and lots of
drivers get this mildly wrong one way or the other.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Simon Ser <contact@emersion.fr>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211161113.3350061-2-daniel.vetter@ffwll.ch
The BOSS GT-1 (USB ID 0582:01d6) requires implicit feedback
like other similar BOSS devices. This patch adds this support.
[ rearranged the table entry in the ID order -- tiwai ]
Signed-off-by: Mike Oliphant <oliphant@nostatic.org>
Link: https://lore.kernel.org/r/20201221215533.2511-1-oliphant@nostatic.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ville suggested this as a good idea, let's move this before moving
the crtc code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Jani: fixed i915xx_plane.h standalone build.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201221110957.18215-1-jani.nikula@intel.com
This file is a monster, let's start simple, the cursor plane code
seems pretty standalone, and splits out easily enough.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[Jani: cleaned up intel_cursor.h a bit.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201221090449.8288-4-jani.nikula@intel.com
memblock_enforce_memory_limit accepts the maximum memory size not the
maximum address that can be handled by kernel. Fix the function invocation
accordingly.
Fixes: 1bd14a66ee ("RISC-V: Remove any memblock representing unusable memory area")
Cc: stable@vger.kernel.org
Reported-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
this is one of the cases where we need to use d_real() - we are
using more than the name of dentry here. ->d_sb is used as well,
so in case of hostfs being used as a layer we get the wrong
superblock.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The definition of IS_ERR() already applies the unlikely() notation
when checking the error status of the passed pointer. For this
reason there is no need to have the same notation outside of
IS_ERR() itself.
Clean up code by removing redundant notation.
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If emergency system shutdown is called, like by thermal shutdown,
a dm device could be alive when the block device couldn't process
I/O requests anymore. In this state, the handling of I/O errors
by new dm I/O requests or by those already in-flight can lead to
a verity corruption state, which is a misjudgment.
So, skip verity work in response to I/O error when system is shutting
down.
Signed-off-by: Hyeongseok Kim <hyeongseok@gmail.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
ability to get struct clk pointers from a struct clk_hw so that clk providers
can consume the clks they provide, if they need to do something like that. This
has been a long missing part of the clk provider API that will help us move
away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are
added for the clk_set_rate() "range" functions, similar to the tracepoints we
already have for clk_set_rate() and we added a column to debugfs to help
developers understand the hardware enable state of clks in case firmware or
bootloader state is different than what is expected. Overall the core changes
are mostly improving the clk driver writing experience.
At the driver level, we have the usual collection of driver updates and new
drivers for new SoCs. This time around the Qualcomm folks introduced a good
handful of clk drivers for various parts of three or four SoCs. The SiFive
folks added a new clk driver for their FU740 SoCs, coming in second on the
diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that
for various new features. One last thing to note in the driver area is that the
i.MX driver has gained a new binding to support SCU clks after being on the
list for many months. It uses a two cell binding which is sort of rare in clk
DT bindings. Beyond that we have the usual set of driver fixes and tweaks that
come from more testing and finding out that some configuration was wrong or
that a driver could support being built as a module.
Core:
- Add some trace points for clk_set_rate() "range" functions
- Add hardware enable information to clk_summary debugfs
- Replace clk-provider.h with of_clk.h when possible
- Add devm variant of clk_notifier_register()
- Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw
New Drivers:
- Bindings for Canaan K210 SoC clks
- Support for SiFive FU740 PRCI
- Camera clks on Qualcomm SC7180 SoCs
- GCC and RPMh clks on Qualcomm SDX55 SoCs
- RPMh clks on Qualcomm SM8350 SoCs
- LPASS clks on Qualcomm SM8250 SoCs
Updates:
- DVFS support for AT91 clk driver
- Update git repo branch for Renesas clock drivers
- Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U
- Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E
- Stop using __raw_*() I/O accessors in Renesas clk drivers
- One more conversion of DT bindings to json-schema
- Make i.MX clk-gate2 driver more flexible
- New two cell binding for i.MX SCU clks
- Drop of_match_ptr() in i.MX8 clk drivers
- Add arch dependencies for Rockchip clk drivers
- Fix i2s on Rockchip rk3066
- Add MIPI DSI clks on Amlogic axg and g12 SoCs
- Support modular builds of Amlogic clk drivers
- Fix an Amlogic Video PLL clock dependency
- Samsung Kconfig dependencies updates for better compile test coverage
- Refactoring of the Samsung PLL clocks driver
- Small Tegra driver cleanups
- Minor fixes to Ingenic and VC5 clk drivers
- Cleanup patches to remove unused variables and plug memory leaks
-----BEGIN PGP SIGNATURE-----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=Wt9O
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core framework got some nice improvements this time around. We
gained the ability to get struct clk pointers from a struct clk_hw so
that clk providers can consume the clks they provide, if they need to
do something like that. This has been a long missing part of the clk
provider API that will help us move away from exposing a struct clk
pointer in the struct clk_hw. Tracepoints are added for the
clk_set_rate() "range" functions, similar to the tracepoints we
already have for clk_set_rate() and we added a column to debugfs to
help developers understand the hardware enable state of clks in case
firmware or bootloader state is different than what is expected.
Overall the core changes are mostly improving the clk driver writing
experience.
At the driver level, we have the usual collection of driver updates
and new drivers for new SoCs. This time around the Qualcomm folks
introduced a good handful of clk drivers for various parts of three or
four SoCs. The SiFive folks added a new clk driver for their FU740
SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic
SoCs had lots of work done after that for various new features. One
last thing to note in the driver area is that the i.MX driver has
gained a new binding to support SCU clks after being on the list for
many months. It uses a two cell binding which is sort of rare in clk
DT bindings. Beyond that we have the usual set of driver fixes and
tweaks that come from more testing and finding out that some
configuration was wrong or that a driver could support being built as
a module.
Summary:
Core:
- Add some trace points for clk_set_rate() "range" functions
- Add hardware enable information to clk_summary debugfs
- Replace clk-provider.h with of_clk.h when possible
- Add devm variant of clk_notifier_register()
- Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw
New Drivers:
- Bindings for Canaan K210 SoC clks
- Support for SiFive FU740 PRCI
- Camera clks on Qualcomm SC7180 SoCs
- GCC and RPMh clks on Qualcomm SDX55 SoCs
- RPMh clks on Qualcomm SM8350 SoCs
- LPASS clks on Qualcomm SM8250 SoCs
Updates:
- DVFS support for AT91 clk driver
- Update git repo branch for Renesas clock drivers
- Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U
- Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E
- Stop using __raw_*() I/O accessors in Renesas clk drivers
- One more conversion of DT bindings to json-schema
- Make i.MX clk-gate2 driver more flexible
- New two cell binding for i.MX SCU clks
- Drop of_match_ptr() in i.MX8 clk drivers
- Add arch dependencies for Rockchip clk drivers
- Fix i2s on Rockchip rk3066
- Add MIPI DSI clks on Amlogic axg and g12 SoCs
- Support modular builds of Amlogic clk drivers
- Fix an Amlogic Video PLL clock dependency
- Samsung Kconfig dependencies updates for better compile test coverage
- Refactoring of the Samsung PLL clocks driver
- Small Tegra driver cleanups
- Minor fixes to Ingenic and VC5 clk drivers
- Cleanup patches to remove unused variables and plug memory leaks"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
dt-binding: clock: Document canaan,k210-clk bindings
dt-bindings: Add Canaan vendor prefix
clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"
clk: ingenic: Fix divider calculation with div tables
clk: sunxi-ng: Make sure divider tables have sentinel
clk: s2mps11: Fix a resource leak in error handling paths in the probe function
clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
clk: si5351: Wait for bit clear after PLL reset
clk: at91: sam9x60: remove atmel,osc-bypass support
clk: at91: sama7g5: register cpu clock
clk: at91: clk-master: re-factor master clock
clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz
clk: at91: sama7g5: decrease lower limit for MCK0 rate
clk: at91: sama7g5: remove mck0 from parent list of other clocks
clk: at91: clk-sam9x60-pll: allow runtime changes for pll
clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics
clk: at91: clk-master: add 5th divisor for mck master
clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT
dt-bindings: clock: at91: add sama7g5 pll defines
clk: at91: sama7g5: fix compilation error
...
- fix long-standing limitation on open-unlink-fop pattern
- add refcount to p9_fid (fixes the above and will allow for more
cleanups and simplifications in the future)
-----BEGIN PGP SIGNATURE-----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=DKlc
-----END PGP SIGNATURE-----
Merge tag '9p-for-5.11-rc1' of git://github.com/martinetd/linux
Pull 9p update from Dominique Martinet:
- fix long-standing limitation on open-unlink-fop pattern
- add refcount to p9_fid (fixes the above and will allow for more
cleanups and simplifications in the future)
* tag '9p-for-5.11-rc1' of git://github.com/martinetd/linux:
9p: Remove unnecessary IS_ERR() check
9p: Uninitialized variable in v9fs_writeback_fid()
9p: Fix writeback fid incorrectly being attached to dentry
9p: apply review requests for fid refcounting
9p: add refcount to p9_fid struct
fs/9p: search open fids first
fs/9p: track open fids
fs/9p: fix create-unlink-getattr idiom
Since the default value of sysctl_max_map_count is defined as
DEFAULT_MAX_MAP_COUNT from mm/util.c
int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
DEFAULT_MAX_MAP_COUNT is defined as 65530 (65535-5) in include/linux/mm.h
#define MAPCOUNT_ELF_CORE_MARGIN (5)
#define DEFAULT_MAX_MAP_COUNT (USHRT_MAX - MAPCOUNT_ELF_CORE_MARGIN)
Signed-off-by: Fengfei Xi <xi.fengfei@h3c.com>
Link: https://lore.kernel.org/r/20201210082134.36957-1-xi.fengfei@h3c.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
We need r1 to be properly set before activating MMU, otherwise any new
exception taken while saving registers into the stack in syscall
prologs will use the user stack, which is wrong and will even lockup
or crash when KUAP is selected.
Do that by switching the meaning of r11 and r1 until we have saved r1
to the stack: copy r1 into r11 and setup the new stack pointer in r1.
To avoid complicating and impacting all generic and specific prolog
code (and more), copy back r1 into r11 once r11 is save onto
the stack.
We could get rid of copying r1 back and forth at the cost of rewriting
everything to use r1 instead of r11 all the way when CONFIG_VMAP_STACK
is set, but the effort is probably not worth it for now.
Fixes: da7bb43ab9 ("powerpc/32: Fix vmap stack - Properly set r1 before activating MMU")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a3d819d5c348cee9783a311d5d3f3ba9b48fd219.1608531452.git.christophe.leroy@csgroup.eu
