Fixes stm32mp15*-scmi DTS files introduced in [1] to also access PWR
regulators through SCMI service. This is needed since enabling secure
only access to RCC clock and reset controllers also enables secure
access only on PWR voltage regulators reg11, reg18 and usb33 hence
these must also be accessed through SCMI Voltage Domain protocol.
This change applies on commit [2] that already corrects issues from
commit [1].
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: [1] https://lore.kernel.org/linux-arm-kernel/20220422150952.20587-7-alexandre.torgue@foss.st.com
Link: [2] https://lore.kernel.org/linux-arm-kernel/20220613071920.5463-1-alexandre.torgue@foss.st.com
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Adding a "secure" version of STM32 boards (DK1/DK2/ED1/EV1), SCMI (clock/
reset) protocol and OP-TEE node have been added in SoC dtsi file
(stm32mp151.dtsi). They have been added with a status disabled in order to
keep our legacy unchanged. It is actually not enough to keep our legacy
unchanged.
First, just a reminder about our use case: TF-A (BL2) loads and starts
OP-TEE, then loads and runs U-Boot. U-Boot code checks if an OP-TEE is
running, if yes it searches in Kernel device tree if an OP-TEE node is
present:
-If the OP-TEE node is not present then U-Boot copies OP-TEE node and its
reserved memory region from U-Boot device tree to the kernel device tree.
-If the OP-TEE node is present then it does nothing (this OP-TEE node will
be used by Linux). So U-Boot lets the kernel device tree unchanged thinking
it is correct for an OP-TEE usage. It is the case for our legacy boards,
the OP-TEE node is present (although disabled) but the reserved memory
region is not declared. As no memory region has been reserved for OP-TEE,
the end of DDR is seen by the kernel as free and then used for CMA. But as
OP-TEE is running, this end of DDR is already used by OP-TEE. So as soon as
kernel tries to access to the CMA region OP-TEE raises an error.
To fix it, all OP-TEE node and SCMI is moved in a dedicated file.
Fixes: 40b4157dbd ("ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15")
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20220613071920.5463-1-alexandre.torgue@foss.st.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a "secure" version based on SCMI of STM32 boards. Only boards
provided by STMicroelectronics are concerned:
-STM32MP157A-DK1
-STM32MP157C-DK2
-STM32MP157C-ED1
-STM32MP157C-EV1
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>