Sstc extension allows the guest to program the vstimecmp CSR directly
instead of making an SBI call to the hypervisor to program the next
event. The timer interrupt is also directly injected to the guest by
the hardware in this case. To maintain backward compatibility, the
hypervisors also update the vstimecmp in an SBI set_time call if
the hardware supports it. Thus, the older kernels in guest also
take advantage of the sstc extension.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/all/CAAhSdy2mb6wyqy0NAn9BcTWKMYEc0Z4zU3s3j7oNqBz6eDQ9sg@mail.gmail.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The Guest/VM can use Svpbmt in VS-stage page tables when allowed by the
Hypervisor using the henvcfg.PBMTE bit.
We add Svpbmt support for the KVM Guest/VM which can be enabled/disabled
by the KVM user-space (QEMU/KVMTOOL) using the ISA extension ONE_REG
interface.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, there is no provision for vmm (qemu-kvm or kvmtool) to
query about multiple-letter ISA extensions. The config register
is only used for base single letter ISA extensions.
A new ISA extension register is added that will allow the vmm
to query about any ISA extension one at a time. It is enabled for
both single letter or multi-letter ISA extensions. The ISA extension
register is useful to if the vmm requires to retrieve/set single
extension while the config register should be used if all the base
ISA extension required to retrieve or set.
For any multi-letter ISA extensions, the new register interface
must be used.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add a KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctl interface for floating
point registers such as F0-F31 and FCSR. This support is added for
both 'F' and 'D' extensions.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
The RISC-V hypervisor specification doesn't have any virtual timer
feature.
Due to this, the guest VCPU timer will be programmed via SBI calls.
The host will use a separate hrtimer event for each guest VCPU to
provide timer functionality. We inject a virtual timer interrupt to
the guest VCPU whenever the guest VCPU hrtimer event expires.
This patch adds guest VCPU timer implementation along with ONE_REG
interface to access VCPU timer state from user space.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
For KVM RISC-V, we use KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls to access
VCPU config and registers from user-space.
We have three types of VCPU registers:
1. CONFIG - these are VCPU config and capabilities
2. CORE - these are VCPU general purpose registers
3. CSR - these are VCPU control and status registers
The CONFIG register available to user-space is ISA. The ISA register is
a read and write register where user-space can only write the desired
VCPU ISA capabilities before running the VCPU.
The CORE registers available to user-space are PC, RA, SP, GP, TP, A0-A7,
T0-T6, S0-S11 and MODE. Most of these are RISC-V general registers except
PC and MODE. The PC register represents program counter whereas the MODE
register represent VCPU privilege mode (i.e. S/U-mode).
The CSRs available to user-space are SSTATUS, SIE, STVEC, SSCRATCH, SEPC,
SCAUSE, STVAL, SIP, and SATP. All of these are read/write registers.
In future, more VCPU register types will be added (such as FP) for the
KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch implements VCPU interrupts and requests which are both
asynchronous events.
The VCPU interrupts can be set/unset using KVM_INTERRUPT ioctl from
user-space. In future, the in-kernel IRQCHIP emulation will use
kvm_riscv_vcpu_set_interrupt() and kvm_riscv_vcpu_unset_interrupt()
functions to set/unset VCPU interrupts.
Important VCPU requests implemented by this patch are:
KVM_REQ_SLEEP - set whenever VCPU itself goes to sleep state
KVM_REQ_VCPU_RESET - set whenever VCPU reset is requested
The WFI trap-n-emulate (added later) will use KVM_REQ_SLEEP request
and kvm_riscv_vcpu_has_interrupt() function.
The KVM_REQ_VCPU_RESET request will be used by SBI emulation (added
later) to power-up a VCPU in power-off state. The user-space can use
the GET_MPSTATE/SET_MPSTATE ioctls to get/set power state of a VCPU.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch adds initial skeletal KVM RISC-V support which has:
1. A simple implementation of arch specific VM functions
except kvm_vm_ioctl_get_dirty_log() which will implemeted
in-future as part of stage2 page loging.
2. Stubs of required arch specific VCPU functions except
kvm_arch_vcpu_ioctl_run() which is semi-complete and
extended by subsequent patches.
3. Stubs for required arch specific stage2 MMU functions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
