Fixed bracketing around condition statement.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver is restricting voltage levels if system cannot switch
in vblank.
[How]
Change allow_for_pstate_or_stutter_in_vblank_final from
dm_prefetch_support_uclk_fclk_and_stutter to
dm_prefetch_support_uclk_fclk_and_stutter_if_possible.
Add support for a new registry property,
DalDMLDisallowAlternatePrefetchModes, for easier debugging.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In some cases MPC tree bottom pipe ends up point to itself. This causes
iterating from top to bottom to hang the system in an infinite loop.
[How]
When looping to next MPC bottom pipe, check that the pointer is not same
as current to avoid infinite loop.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enabling stream with tg lock makes config settings
pending causing the garbage until tg unlock.
[How]
Keep the original lock mechanism
The driver doesn't lock tg if plane_state is null.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DIG_FIFO_OUTPUT_PIXEL_MODE not being set for dcn314
resulting in incorrect timing for YCbCr4:2:0
[How]
Copy the implementation of set_pixels_per_cycle from dcn32
over to dcn314
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Add a variable to update FCLK latency
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When multiple displays are used, the underlying framebuffers could be
two separate framebuffers, or a single large framebuffer. Fix the
calculation logic for CAB to account for large framebuffer. Current
logic assumes that any FB that the plane points to are independent. When
a single FB is used on the system, this does 2 times allocation.
Add a check to prevent duplicate allocation by checking if the base
addresses are the same, and then ensuring that the if we allocate using
the pitch, whole of the other fbs will be accounted for in the first
allocation.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At this point, we isolate the FPU code associated with DCN314 under the
DML folder. This commit drops the FPU flags from the Makefile.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function responsible for populating DML pipes has some FPU
operations, and for this reason, it must be moved to the dml folder.
This commit moves such function from resource to the fpu file under the
dml folder.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN314 has multiple references to FPU operations inside the resource
files, and we need to move those codes to the DML folder. This commit
creates the dcn314_fpu files and moves the bounding box operation to
this file.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DP DSC YCbCr422 not working because dcn314_calculate_dccg_k1_k2_values
does not account for two pixels per container
[How]
Replace the contents of dcn314_calculate_dccg_k1_k2_values with the
code from the function dcn32_calculate_dccg_k1_k2_values
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GC version is 11.0.1 rather than 11.0.2
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing headers to solve the following warnings from sparse:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:656:17: warning: symbol 'ddr4_wm_table_gs' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:693:17: warning: symbol 'lpddr4_wm_table_gs' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:730:17: warning: symbol 'lpddr4_wm_table_with_disabled_ppt' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:767:17: warning: symbol 'ddr4_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:804:17: warning: symbol 'ddr4_1R_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:841:17: warning: symbol 'lpddr4_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:217:17: warning: symbol 'ddr4_wm_table' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:254:17: warning: symbol 'lpddr5_wm_table' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:53:30: warning: symbol 'dcn3_1_ip' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:197:30: warning: symbol 'dcn3_15_ip' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:293:30: warning: symbol 'dcn3_16_ip' was not declared. Should it be static?
Fixes: 1a3408259b ("drm/amd/display: move FPU code on dcn21 clk_mgr")
Fixes: 5085e0361f ("drm/amd/display: move FPU code from dcn301 clk mgr to DML folder")
Fixes: 26f4712aed ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder")
Fixes: fa896297b3 ("drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder")
Fixes: 3f8951cc12 ("drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder")
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since "rn_clk_mgr.h" needs ‘struct clk_mgr_internal’ which is declared
in "clk_mgr_internal.h", include "clk_mgr_internal.h" in "rn_clk_mgr.h"
instead of in its source file.
Because of the change above, change the order of '#include
"rn_clk_mgr.h"', so that the necessary structs are visible to
dcn20_clk_mgr.h.
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As "dcn3_1_soc", "dcn3_15_soc", and "dcn3_16_soc" are not used outside
of their corresponding "dcn3*_fpu.c", make them static and remove their
extern declaration.
Fixes: 26f4712aed ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder")
Fixes: fa896297b3 ("drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder")
Fixes: 3f8951cc12 ("drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder")
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two identical CFLAGS entries for "display_mode_vba_20.o", so
remove one of them. Also, as there's already an entry for
"display_mode_lib.o" CFLAGS, regardless of CONFIG_DRM_AMD_DC_DCN being
defined or not, remove the one entry between CONFIG_DRM_AMD_DC_DCN ifdef
guards.
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit bac4b41d91.
This commit was a part of a patchset responsible for reducing the stack
size. However, after some other changes, this commit becomes
unnecessary, so we are reverting it here.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit c3b3f9ba25.
This commit was a part of a patchset responsible for reducing the stack
size. However, after some other changes, this commit becomes
unnecessary, so we are reverting it here.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3c3abac601.
This commit was a part of a patchset responsible for reducing the stack
size. However, after some other changes, this commit becomes
unnecessary, so we are reverting it here.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 86e4863e67.
This commit was a part of a patchset responsible for reducing the stack
size. However, after some other changes, this commit becomes
unnecessary, so we are reverting it here.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Add the missing definition to set the register field
HBLANK_MINIMUM_SYMBOL_WIDTH
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We got a report from Stephen/Michael that the PowerPC build was failing
with the following error:
ld: drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o uses soft float
ld: failed to merge target specific data of file drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o
This error happened because of the function optc3_set_vrr_m_const. This
function expects a double as a parameter in a code that is not allowed
to have FPU operations. After further investigation, it became clear
that optc3_set_vrr_m_const was never invoked, so we can safely drop this
function and fix the ld issue.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Melissa Wen <mwen@igalia.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All references to struct freesync_context were removed, so remove the
struct freesync_context itself and its entry on struct dc_stream_state.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eliminate the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c:2344:67-68: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we use the allmodconfig option we see the following error:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'dml32_ModeSupportAndSystemConfigurationFull':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:3799:1: error: the frame size of 2464 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
3799 | } // ModeSupportAndSystemConfigurationFull
This commit fixes this issue by moving part of the mode support
operation from ModeSupportAndSystemConfigurationFull to a dedicated
function.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Copy crc_skip_count when duplicating CRTC state
- Add debug option for idle optimizations on cursor updates
- Disable MPC split for DCN32/321
- Add missing ODM 2:1 policy logic
- Update DCN32 and DCN321 SR latencies
- Add reinstate dram in the FPO logic
- Add dc_ctx to link_enc_create() parameters
- Cache cursor when cursor exceeds 64x64
- Add support for manual DMUB FAMS trigger
- Fix dpstreamclk programming
- Add missing AUDIO_DTO_SEL reg field
- Add OTG/ODM functions
- Use correct clock source constructor for DCN314
- Use correct DTO_SRC_SEL for 128b/132b encoding
- Add pixel rate div calcs and programming
- Remove FPU flags from DCN30 Makefile
- Create patch bounding box function for isolate FPU
- Move mclk calculation function to DML
- Remove FPU operations from dcn201 resources
- Fallback to SW cursor if SubVP + cursor too big
- Drop unnecessary FPU flags on dcn302 files
- Reboot while unplug hdcp enabled dp from mst hub
- Reset pipe count when iterating for DET override
- Calculate MALL cache lines based on Mblks required
- Fix two MPO videos in single display ODM combine mode
- Guard against zero memory channels
- Updates SubVP + SubVP DRR cases updates
- Fix OPTC function pointers for DCN314
- Add enable/disable FIFO callbacks to stream setup
- Avoid MPC infinite loop
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For optimizations and debug purposes we added an option to exit idle
operations on cursor updates.
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to CRB, no need to rely on MPC splitting to maximize use of DET
anymore.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Phantom pipes must use the same configuration used in main pipes. This
commit add this check.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update worst case SR latencies according to values measured by hardware
team.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
