add smu_v13_0_10 support.
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add debugfs interface to log GFXOFF statistics:
- Read amdgpu_gfxoff_count to get the total GFXOFF entry count at the
time of query since system power-up
- Write 1 to amdgpu_gfxoff_residency to start logging, and 0 to stop.
Read it to get average GFXOFF residency % multiplied by 100
during the last logging interval.
Both features are designed to be keep the values persistent between
suspends.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch will make SMU send msg to IMU for the front-door loading, it is
required by some ASICs.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current approach breaks S3/S4 as asic reset is needed for them.
And putting SMU out of service(via SMU_MSG_PrepareMp1ForUnload) will make
that(asic reset) failed. Considering with current designs, there is
actually also asic reset involved on driver reloading. That can make
asic back to a clean state. So, the SMU_MSG_PrepareMp1ForUnload operation
will be not so necessary. Thus we will just drop the SMU_MSG_PrepareMp1ForUnload
operation. We may revise the whole driver reloading sequences when there
is a better design.
Fixes: 72aeb6ee0c ("drm/amd/pm: fix driver reload SMC firmware fail issue for smu13")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set mp1 unload state will cause the SMC FW can't accept any SMU message,
skip to set mp1 unload state to avoid following case fail:
- runtime pm case.
- gpu reset case.
Fixes: 72aeb6ee0c ("drm/amd/pm: fix driver reload SMC firmware fail issue for smu13")
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
issue calltrace:
[ 402.773695] [drm] failed to load ucode SMC(0x2C)
[ 402.773754] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0x0)
[ 402.773762] [drm:psp_load_smu_fw [amdgpu]] *ERROR* PSP load smu failed!
[ 402.966758] [drm:psp_v13_0_ring_destroy [amdgpu]] *ERROR* Fail to stop psp ring
[ 402.966949] [drm:psp_hw_init [amdgpu]] *ERROR* PSP firmware loading failed
[ 402.967116] [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* hw_init of IP block <psp> failed -22
[ 402.967252] amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_init failed
[ 402.967255] amdgpu 0000:03:00.0: amdgpu: Fatal error during GPU init
if not reset mp1 state during kernel driver unload, it will cause psp
load pmfw fail at the second time.
add PPSMC_MSG_PrepareMp1ForUnload support for smu_v13_0_0/smu_v13_0_7
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable BACO on smu_v13_0_7
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW will handle that properly. Driver involvement may cause some
unexpected issues.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GC v11_0_1 asic needs to issue the EnableGfxImu message after start IMU.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since PMFW will handle this properly. Driver involvement is
unnecessary.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the entry to set the ppt functions for SMU IP v13.0.4.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit eaa090538e.
Commit ebc002e3ee ("drm/amdgpu: don't use BACO for reset in S3")
stops using BACO for reset during suspend, so it's no longer
necessary to leave BACO enabled during suspend. This fixes
resume from suspend on the navy flounder dGPU in the ASUS ROG
Strix G513QY.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2008
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1982
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modify the common smu13 code and add a new smu
13.0.0 ppt file to handle the smu 13.0.0 specific
configuration.
v2: squash in typo fix in profile name
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With SCPM enabled, the pptable used will be signed. It cannot
be used directly by driver. To get the raw pptable, we need to
rely on the combo pptable(and its revelant SMU message).
Also, the pptable transferring(to SMU) will be performed by PSP.
Some SMU messages will be not available to driver any more.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With SCPM enabled, pptable cannot be uploaded to SMU directly.
The transferring has to be via PSP.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Place pptable setup after smu_set_driver_table_location. As under SCPM
enabled scenario, the latter one is a prerequisite for the former one.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Firsrt of all, the operations involved is to interact with
VBIOS. They are fully supported at ->sw_init phase.
Secondly, the new mechanism to upload pptable to SMU is
introduced. With the new mechanism, the pptable transferring
has to be via PSP. That requires the pptable ucode(and necessary
bootupp values retrieving) must be ready before ->hw_init phase of PSP.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support message SMU update bad channel info to update HBM bad channel
info in OOB table
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set smu sw function and enable swSMU support for MP1.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Some ASICs, with the PMFW default settings, we may see the
power consumption reported via metrics table is "Very Erratic".
With the socket power alpha filter set as 10/100ms, we can correct
that issue.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang static analysis reports this error
amdgpu_smu.c:2289:9: warning: Called function pointer
is null (null dereference)
return smu->ppt_funcs->emit_clk_levels(
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
There is a logic error in the earlier check of
emit_clk_levels. The error value is set to
the ret variable but ret is never used. Return
directly and remove the unneeded ret variable.
Fixes: 5d64f9bbb6 ("amdgpu/pm: Implement new API function "emit" that accepts buffer base and write offset")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As there is no internal cache for enabled ppfeatures now. Thus the 2nd
parameter will be not needed any more.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The following scenarios make the driver cache for enabled ppfeatures
outdated and invalid:
- Other tools interact with PMFW to change the enabled ppfeatures.
- PMFW may enable/disable some features behind driver's back. E.g.
for sienna_cichild, on gfxoff entering, PMFW will disable gfx
related DPM features. All those are performed without driver's
notice.
Also considering driver does not actually interact with PMFW such
frequently, the benefit brought by such cache is very limited.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The supported features should be retrieved just after EnableAllDpmFeatures message
complete. And the check(whether some dpm feature is supported) is only needed when we
decide to enable or disable it.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use uint64_t instead of an array of uint32_t. This can avoid
some non-necessary intermediate uint32_t -> uint64_t conversions.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(v3)
Rewrote patchset to order patches as (API, hw impl, usecase)
- added API for new power management function emit_clk_levels
This function should duplicate the functionality of print_clk_levels,
but this solution passes the buffer base and write offset down the stack.
- new powerplay function emit_clock_levels, implemented by smu_emit_ppclk_levels()
This function parallels the implementation of smu_print_ppclk_levels and
calls emit_clk_levels, and allows the returns of errors
- new helper function smu_convert_to_smuclk called by smu_print_ppclk_levels and
smu_emit_ppclk_levels
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-By: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose both SMU I2C buses. Some boards use the same bus for both the RAS
and FRU EEPROMs and others use different buses. This enables the
additional I2C bus and sets the right buses to use for RAS and FRU EEPROM
access.
Cc: Roy Sun <Roy.Sun@amd.com>
Co-developed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang static analysis reports this represenative problem
amdgpu_smu.c:144:18: warning: The left operand of '*' is a garbage value
return clk_freq * 100;
~~~~~~~~ ^
If there is no get_dpm_ultimate_freq function,
smu_get_dpm_freq_range returns success without setting the
output min,max parameters. So return an -ENOTSUPP error.
Fixes: e5ef784b1e ("drm/amd/powerplay: revise calling chain on retrieving frequency range")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As all those related APIs are already well protected by adev->pm.mutex.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As those APIs related are already well protected by adev->pm.mutex.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As all those related APIs are already well protected by
adev->pm.mutex and smu->message_lock.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As all those related APIs are already well protected by
adev->pm.mutex and smu->message_lock.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As those related APIs are already protected by adev->pm.mutex.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As all those APIs are already protected either by adev->pm.mutex
or smu->message_lock.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On functionality unsupported, -EOPNOTSUPP will be returned. And we rely
on that to determine the fan attributes support.
Fixes: 79c65f3fcb ("drm/amd/pm: do not expose power implementation details to amdgpu_pm.c")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid cross callings which make lock protection enforcement
on amdgpu_dpm_force_performance_level() impossible.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those gfxoff controls added for some specific ASICs are unnecessary.
The functionalities are not affected without them. Also to align with
other ASICs, they should also be dropped.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can cover the power implementation details. And as what did for
powerplay framework, we hook the smu_context to adev->powerplay.pp_handle.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_pm.c holds all the user sysfs/hwmon interfaces. It's another
client of our power APIs. It's not proper to spike into power
implementation details there.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those implementation details(whether swsmu supported, some ppt_funcs supported,
accessing internal statistics ...)should be kept internally. It's not a good
practice and even error prone to expose implementation details.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To pair with the workaround which always reset the ASIC in suspend.
Otherwise, the reset which relies on BACO will fail.
Fixes: daf8de0874 ("drm/amdgpu: always reset the asic in suspend (v2)")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Aldebaran chip passthrough case we need to intimate SMU
about special handling for SBR.On older chips we send
LightSBR to SMU, enabling the same for Aldebaran. Slight
difference, compared to previous chips, is on Aldebaran, SMU
would do a heavy reset on SBR. Hence, the word Heavy
instead of Light SBR is used for SMU to differentiate.
Reviewed by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: sashank saye <sashank.saye@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the s0ix entry need retain gfx in the gfxoff state,so here need't
set gfx cgpg in the S0ix suspend-resume process. Moreover move the S0ix
check into SMU12 can simplify the code condition check.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we don't find some neccesities to power on/off
SDMA in SMU hw_init/fini(). It makes more sense in SDMA
hw_init/fini().
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
