Add new file intel_modeset_verify.c for high level modeset verification
code to declutter intel_display.h. The new file is supposed to be about
crtc/encoder/connector verification; the state verification for very
specific functionality such as plls or wm should be placed next to the
code it verifies.
Fix some minor checkpatch issues while at it.
v2: Rebase
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b9b47c14316a9edb772a8b8f934eabe7e928dd76.1655372759.git.jani.nikula@intel.com
Make sure FIFO underrun reporting is flagged as disabled very
early during the state readout so that we don't get any
spurious FIFO underruns reports from intel_crtc_disable_noatomic().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615174851.20658-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The VBIOS/GOP may not program the FDI M/n vs. dotclock entirely
consistently. Eg. on a SNB Thinkpad X220 LVDS I see dotclock of
69.286 MHz (the best the DPLL can do) vs. FDI M/N 69.3 MHz
(matches what the EDID actually declares).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-15-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Avoid bringing the entire machine down even if there's a bug that
shouldn't happen, but won't corrupt the system either. Log them loudly
and limp on.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531162527.1062319-1-jani.nikula@intel.com
Don't see a real reson not to check hw.active and hw.enable in
intel_pipe_config_compare(). We do have some checks for them
at a higher level, but I think better check them also in
intel_pipe_config_compare() in case something else doesn't
do a thorough enough job.
Also shuffle the mst_master_transcoder check next to the
cpu_transcoder check for a bit of consistency.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-21-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use the "[CRTC:%d:%s]'/etc. format for some of the modeset debugs
so we know more about what has happened during the modeset state
computation.
Also tweak the connector bpp debug message a bit to make it less
confusing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use the state+crtc calling convention for intel_modeset_pipe_config()
and othere related functions. Many of these need the full atomic state
anyway so passing it all the way through is just nicer than having to
worry about whether it can actually be extracted from eg. the crtc
state passed in.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Deduplicate the drm_rect comparisons.
We also drop the redundant pch_pfit.enabled check since the
pch_pfit.dst rectanble will be zeroed anyway when the pfit
is not enabled.
v2: Document why we drop the enabled check (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move the panel specific VBT parsing to happen during the
output probing stage. Needs to be done because the VBT
parsing will need to look at the EDID to determine
the correct panel_type on some machines.
We split the parsed VBT data (i915->vbt) along the same
boundary. For the moment we just hoist all the panel
specific stuff into connector->panel.vbt since that seems
like the most convenient place for eg. the backlight code.
Note that we simply drop the drrs type check from
intel_drrs_frontbuffer_update() since that operates on the whole
device rather than a specific connector/encoder. But the check
was just a micro optimization so removing it doesn't actually
mattter for correctness.
TODO: Lot's of cleanup to be done in the future. Eg. most of
the DSI stuff could probably be eliminated entirely and just
parsed on demand during DSI init.
v2: Note the intel_drrs_frontbuffer_update() change
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Parsing the panel specific data (anything that depends on panel_type)
from VBT is currently happening too early. Split the whole thing
into global vs. panel specific parts so that we can start doing
the panel specific parsing at a later time.
v2: Clarify that this is about panel_type (Jani)
Split out the leak checks (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-12-ville.syrjala@linux.intel.com
drm/i915 feature pull #2 for v5.19:
Features and functionality:
- Add first set of DG2 PCI IDs for "motherboard down" designs (Matt Roper)
- Add initial RPL-P PCI IDs as ADL-P subplatform (Matt Atwood)
Refactoring and cleanups:
- Power well refactoring and cleanup (Imre)
- GVT-g refactor and mdev API cleanup (Christoph, Jason, Zhi)
- DPLL refactoring and cleanup (Ville)
- VBT panel specific data parsing cleanup (Ville)
- Use drm_mode_init() for on-stack modes (Ville)
Fixes:
- Fix PSR state pipe A/B confusion by clearing more state on disable (José)
- Fix FIFO underruns caused by not taking DRAM channel into account (Vinod)
- Fix FBC flicker on display 11+ by enabling a workaround (José)
- Fix VBT seamless DRRS min refresh rate check (Ville)
- Fix panel type assumption on bogus VBT data (Ville)
- Fix panel data parsing for VBT that misses panel data pointers block (Ville)
- Fix spurious AUX timeout/hotplug handling on LTTPR links (Imre)
Merges:
- Backmerge drm-next (Jani)
- GVT changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87bkwbkkdo.fsf@intel.com
Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head, or that we aren't copying
over another mode's list head.
Based on the following cocci script, with manual fixups:
@decl@
identifier M;
expression E;
@@
- struct drm_display_mode M = E;
+ struct drm_display_mode M;
@@
identifier decl.M;
expression decl.E;
statement S, S1;
@@
struct drm_display_mode M;
... when != S
+ drm_mode_init(&M, &E);
+
S1
@@
expression decl.E;
@@
- &*E
+ E
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-19-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Start splitting the .compute_crtc_clock() into two parts; one
part does the computation, the second part does the shared dpll
assignment. I want to move the actual computation part much earlier
into the compute_config() phase.
v2: dg2_crtc_get_shared_dpll() not needed (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move some checks into intel_dpll_crtc_compute_clock() from the
caller. Avoids the caller from having to worry about all this
crap.
We'll also reorder the hw.enable vs. shared_dpll checks since
it makes sense to sanity check that we've cleared out the
old shared_dpll even if the pipe is getting disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rename dp/ to display/ to account for additional display-related
helpers, such as HDMI. Update all related include statements. No
functional changes.
Various drivers, such as i915 and amdgpu, use similar naming scheme
by putting code for video-output standards into a local display/
directory. The new directory's name is aligned with this convention.
v2:
* update commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
Atm the port -> DDI and AUX power domain mapping is specified by relying
on the aliasing of the platform specific intel_display_power_domain enum
values. For instance D12+ platforms refer to the 'D' port and power
domain instances, which doesn't match the bspec terminology, on these
platforms the corresponding port is TC1. To make it clear what
port/domain the code refers to add a mapping between them which matches
the bspec terms on different display versions.
This also allows for removing the aliasing in enum values in a follow-up
patch.
v2: Add the functions to intel_display_power.c, use
intel_display_power_ prefix.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-14-imre.deak@intel.com
To remove the aliasing of the power domain enum values in a follow-up
patch in this patchset (requiring a bigger mask) and allow for defining
additional power domains in the future (at least some upcoming TypeC
changes requires this) convert the u64 i915_power_well_desc::domains
mask to a bitmap.
For simplicity I changed the for_each_power_domain_well() macros to
accept one domain only instead of a mask, as there isn't any current
user passing multiple domains.
v2: Don't add a typedef for the bitmap struct. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-9-imre.deak@intel.com
Follow the new i9xx DPLL FP register programming sequence
introduced in commit 62d66b2183 ("drm/i915: Fold
i9xx_set_pll_dividers() into i9xx_enable_pll()") in the
i830 "power well" code as well. Just for consistency.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321195006.775-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Let's make sure FBC is always disabled when we start to take
over the hardware state.
I suspect this should never really happen, since the only time
when we really should be taking over with the display already
active is when the previous state was progammed by the BIOS,
which likely shouldn't use FBC. This could be driver init,
or S4 resume when the boot kernel doesn't load i915. But I
suppose no harm in keeping this code around for exra safety
since it's quite trivial.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-7-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
By the time intel_fbc_global_disable() gets called during driver
teardown we should have already disabled all the crtcs, so
no way FBC should be enabled at this point.
And I have no idea what the other user (i915_restore_display())
is even trying to achieve.
So let's just throw intel_fbc_global_disable() into the bin.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Add support for the DG2 specific render compression with clear color
framebuffer format.
DG2 onwards discrete gfx has support for new flat CCS mapping,
which brings in display feature in to avoid Aux walk for compressed
surface. This support build on top of Flat CCS support added in XEHPSDV.
FLAT CCS surface base address should be 64k aligned,
Compressed displayable surfaces must use tile4 format.
HAS: 1407880786
B.Spec : 7655
B.Spec : 53902
v2: Merge all bits required for the support of functionality into this
patch from the patch adding the corresponding modifier.
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411143405.1073845-5-imre.deak@intel.com
PIPE_MBUS_DBOX_CTL was only being programmed when a pipe is being
enabled but that could potentially cause issues as it could have
mismatching values while pipes are being enabled.
So here moving the PIPE_MBUS_DBOX_CTL programming of all pipes to be
executed before the function that enables all pipes, leaving all pipes
with a matching A_CREDIT value.
While at it, also moving it to intel_pm.c as we are trying to reduce
the gigantic size of intel_display.c and intel_pm.c have other MBUS
programing sequences.
v2:
- do not program PIPE_MBUS_DBOX_CTL if pipe will not be active or
when it do not needs modeset
- remove the checks to wait a vblank
v3:
- checking if dbuf state is present in state before using it
v4:
- removing redundant checks
- calling intel_atomic_get_new_dbuf_state instead of
intel_atomic_get_dbuf_state
BSpec: 49213
BSpec: 50343
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330155724.255226-3-jose.souza@intel.com
Alderlake-P has different MBUS DBOX BW and B credits than other
platforms, so here setting it properly.
BSpec: 49213
BSpec: 50343
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330155724.255226-2-jose.souza@intel.com
MBUS_DBOX_B2B_TRANSACTIONS_MAX, MBUS_DBOX_B2B_TRANSACTIONS_DELAY and
MBUS_DBOX_REGULATE_B2B_TRANSACTIONS_EN were being programmed with
zeros while specification has different default values for this
registers in display 12 and newer.
While at it also converting all MBUS_DBOX macros to use REG_* macros.
BSpec: 50343
BSpec: 20231
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330155724.255226-1-jose.souza@intel.com
Continuation of the effort to declutter i915_drv.h.
Also, component specific helpers which consult the iommu/virtualization
helpers moved to respective component source/header files as appropriate.
v2:
* s/dev_priv/i915/ in intel_scanout_needs_vtd_wa. (Lucas)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329090204.2324499-1-tvrtko.ursulin@linux.intel.com
[tursulin: fixup conflict in i915_drv.h]
Replace all drm_mode_debug_printmodeline() calls with
DRM_MODE_FMT+DRM_MODE_ARG(). Makes the debug output a bit more
terse in places where we previously had a newline in the precedeing
drm_dbg_kms(), and avoids anything else sneaking in between the two
printk()s in all cases.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
To reduce the amount of registers written during the vblank evade
critical section let's also split the .color_commit() hook to
noarm+arm pair. The noarm hook runs before the vblank evasion
with the arm hook staying inside the critical section.
Just the framework here, actually moving stuff out into the noarm
hook will follow.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220224165103.15682-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Rename the DRRS functiosn to say "(de)activate" rather than
"enable/disable". This let's us differentiate between the
logically enabled vs. actually currently active cases.
v2: Fix kernel doc for intel_drrs_deactivate()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315132752.11849-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Handle the plane relative data rate in exactly the same
way as we already handle the real data rate. Ie. pre-calculate
it during intel_plane_atomic_check_with_state(), and assign/clear
it for the Y plane as needed. This should guarantee that the
tracking is 100% consistent, and makes me have to think less
when the same apporach is used by both types of data rate.
We might even want to consider replacing the relative
data rate with the real data rate entirely, but it's not
clear if that will produce less optimal plane ddb
allocations. So for now lets keep using the current approach.
v2: Rebase due to async flip wm optimization
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-4-ville.syrjala@linux.intel.com
Split the currently combined plane data_rate into the proper
Y vs. CbCr components. This matches how we now track the
plane dbuf allocations, and thus will make the dbuf bandwidth
calculations actually produce the correct numbers for each
dbuf slice.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-3-ville.syrjala@linux.intel.com
Let's store the plane allocation in a manner which more closely
matches how the hw operates. That is, we store the packed/CbCr
ddb in one struct, and the Y ddb in another. Currently we're
storing packed/Y in one struct, CbCr in the other.
This also works pretty well for icl+ where the UV plane is
the main plane and the Y plane is subservient to it. Although
in this case we do not even use ddb_y as we do the ddb allocation
in terms of hw planes.
v2: Rebase
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-2-ville.syrjala@linux.intel.com
Let's just do a full DRRS disable/enable across all pipe updates.
This guarantees that the DRRS work doesn't interfere with anything
while the atomic commit is busy reprogramming the pipe.
Needed so that we can start reprogramming M/N seamlessly during
fastsets whenever possible. Also avoids the pre-bdw DRRS PIPECONF
rmw racing with the potential PIPECONF write from the atomic
commit (eg. due to GAMMA_MODE changes).
v2: Include has_drrs in state dump (José)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315213944.17132-1-ville.syrjala@linux.intel.com
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-20-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
No reason to keep the DRRS enable/disable hidden insider the encoder
hooks. Let's just move them all the way up into platform independent
code so that all platforms get to use them. These are nops when
the state computation doesn't think DRRS is possible.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-14-ville.syrjala@linux.intel.com
Ger rid of one more ugly crtc->config usage by storing the DRRS
state under intel_crtc. intel_drrs_enable() copies what it needs
from the crtc state, after which DRRS can be blissfully ignorant
of anything going on around it.
This also lets multiple pipes do DRRS simultanously and entirely
independently.
v2: Split out some stuff (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
When using bigjoiner it's useful to know the offset of each
individual pipe in the whole set of joined pipes. Let's include
that information in our PIPESRC rectangle. With this we can make
the plane clipping code blissfully unaware of bigjoiner usage, as
all we have to do is remove the pipe's offset from the final plane
destination coordinates.
v2: Use intel_bigjoiner_num_pipes()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-14-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Replace the hardcoded 2 pipe assumptions when we're massaging
pipe_mode and the pipe_src rect to be suitable for bigjoiner.
Instead we can just count the number of pipes in the bitmask.
v2: Introduce intel_bigjoiner_num_pipes()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-13-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
