Daniele needs 84d4333c1e ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
As an integrated GPU, MTL does not have local memory and HAS_LMEM()
returns false. However the platform's stolen memory is presented via
BAR2 (i.e., the BAR we traditionally consider to be the GMADR on IGFX)
and should be managed by the driver the same way that local memory is
on dgpu platforms (which includes setting the "lmem" bit on page table
entries). We use the term "local stolen memory" to refer to this
model.
The major difference from the traditional BAR2 (GMADR) is that
the stolen area is mapped via the BAR2 while in the former BAR2 is an
aperture into the GTT VA through which access are made into stolen area.
BSPEC: 53098, 63830
v2:
1. dropped is_dsm_invalid, updated valid_stolen_size check from Lucas
(Jani, Lucas)
2. drop lmembar_is_igpu_stolen
3. revert to referring GFXMEM_BAR as GEN12_LMEM_BAR (Lucas)
v3:(Jani)
1. rename get_mtl_gms_size to mtl_get_gms_size
2. define register for MMIO address
v4:(Matt)
1. Use REG_FIELD_GET to read GMS value
2. replace the calculations with SZ_256M/SZ_8M
v5: Include more details to commit message on how it is different from
earlier platforms (Anshuman)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Original-author: CQ Tang
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929114658.145287-1-aravind.iddamsetty@intel.com
For proper operation of i915 we need usable PCI GTTMMADDR BAR 0
(1 for GEN2). In most cases we also need usable PCI GFXMEM BAR 2.
Let's add functions to check if BARs are set, and that it have
a size greater than 0.
In case GTTMMADDR BAR, let's validate at the beginning of i915
initialization.
For other BARs, let's validate before first use.
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220805155959.1983584-3-piotr.piorkowski@intel.com
At the moment, when we refer to some PCI BAR we use the number of
this BAR in the code. The meaning of BARs between different platforms
may be different. Therefore, in order to organize the code,
let's start using defined names instead of numbers.
v2: Add lost header in cfg_space.c
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220805155959.1983584-2-piotr.piorkowski@intel.com
For some platfroms we use stop_machine version of
gen8_ggtt_insert_page/gen8_ggtt_insert_entries to avoid a
concurrent GGTT access bug but this causes a circular locking
dependency warning:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ggtt->error_mutex);
lock(dma_fence_map);
lock(&ggtt->error_mutex);
lock(cpu_hotplug_lock);
Fix this by calling gen8_ggtt_insert_page/gen8_ggtt_insert_entries
directly at error capture which is concurrent GGTT access safe because
reset path make sure of that.
v2: Fix rebase conflict and added a comment.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5595
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624110821.29190-1-nirmoy.das@intel.com
Re-do what was attempted in commit 7a5c922377 ("drm/i915/gt: Split
intel-gtt functions by arch"). The goal of that commit was to split the
handlers for older hardware that depend on intel-gtt.ko so i915 can
be built for non-x86 archs, after some more patches. Other archs do not
need intel-gtt.ko.
Main issue with the previous approach: it moved all the hooks, including
the gen8, which is used by all platforms gen8 and newer. Re-do the
split moving only the handlers for gen < 6, which are the only ones
calling out to the separate module.
While at it do some minor cleanups:
- Rename the prefix s/gen5_/gmch_/ to be more accurate what platforms
are covered by intel_ggtt_gmch.c
- Remove dead code for gen12 out of needs_idle_maps()
- Remove TODO comment leftover
- Re-order if/else ladder in ggtt_probe_hw() to keep newest platforms
first
v2: Add minor cleanups (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617230559.2109427-2-lucas.demarchi@intel.com
When DMAR / VT-d is enabled, the display engine uses overfetching,
presumably to deal with the increased latency. To avoid display engine
errors and DMAR faults, as a workaround the GGTT is populated with scatch
PTEs when VT-d is enabled. However starting with gen10, Write-combined
writing of scratch PTES is no longer possible and as a result, populating
the full GGTT with scratch PTEs like on resume becomes very slow as
uncached access is needed.
Therefore, on integrated GPUs utilize the fact that the PTEs are stored in
stolen memory which retain content across S3 suspend. Don't clear the PTEs
on suspend and resume. This improves on resume time with around 100 ms.
While 100+ms might appear like a short time it's 10% to 20% of total resume
time and important in some applications.
One notable exception is Intel Rapid Start Technology which may cause
stolen memory to be lost across what the OS percieves as S3 suspend.
If IRST is enabled or if we can't detect whether IRST is enabled, retain
the old workaround, clearing and re-instating PTEs.
As an additional measure, if we detect that the last ggtt pte was lost
during suspend, print a warning and re-populate the GGTT ptes
On discrete GPUs, the display engine scans out from LMEM which isn't
subject to DMAR, and presumably the workaround is therefore not needed,
but that needs to be verified and disabling the workaround for dGPU,
if possible, will be deferred to a follow-up patch.
v2:
- Rely on retained ptes to also speed up suspend and resume re-binding.
- Re-build GGTT ptes if Intel rst is enabled.
v3:
- Re-build GGTT ptes also if we can't detect whether Intel rst is enabled,
and if the guard page PTE and end of GGTT was lost.
v4:
- Fix some kerneldoc issues (Matthew Auld), rebase.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617152856.249295-1-thomas.hellstrom@linux.intel.com
In order to get the GSC Support merged on drm-intel-gt-next
in a clean fashion we needed this ATS-M patch to avoid
conflict in i915_pci.c:
commit 412c942bdf ("drm/i915/ats-m: add ATS-M platform info")
--
Fixing a silent conflict on drivers/gpu/drm/i915/gt/intel_gt_gmch.c:
- if (!intel_vtd_active(i915))
+ if (!i915_vtd_active(i915))
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Some functions defined in the intel-gtt module are used in several
areas, but is only supported on x86 platforms.
By separating these calls and their static underlying functions to
another area, we are able to compile out these functions for
non-x86 builds and provide stubs for the non-x86 implementations.
In addition to the problematic calls, we are moving the gmch-related
functions to the new area.
Signed-off-by: Casey Bowman <casey.g.bowman@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330234809.1218210-2-casey.g.bowman@intel.com
Continuation of the effort to declutter i915_drv.h.
Also, component specific helpers which consult the iommu/virtualization
helpers moved to respective component source/header files as appropriate.
v2:
* s/dev_priv/i915/ in intel_scanout_needs_vtd_wa. (Lucas)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329090204.2324499-1-tvrtko.ursulin@linux.intel.com
[tursulin: fixup conflict in i915_drv.h]
vms are not getting properly closed. Rather than fixing that,
Remove the vm open count and instead rely on the vm refcount.
The vm open count existed solely to break the strong references the
vmas had on the vms. Now instead make those references weak and
ensure vmas are destroyed when the vm is destroyed.
Unfortunately if the vm destructor and the object destructor both
wants to destroy a vma, that may lead to a race in that the vm
destructor just unbinds the vma and leaves the actual vma destruction
to the object destructor. However in order for the object destructor
to ensure the vma is unbound it needs to grab the vm mutex. In order
to keep the vm mutex alive until the object destructor is done with
it, somewhat hackishly grab a vm_resv refcount that is released late
in the vma destruction process, when the vm mutex is no longer needed.
v2: Address review-comments from Niranjana
- Clarify that the struct i915_address_space::skip_pte_rewrite is a hack
and should ideally be replaced in an upcoming patch.
- Remove an unneeded continue in clear_vm_list and update comment.
v3:
- Documentation update
- Commit message formatting
Co-developed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304082641.308069-2-thomas.hellstrom@linux.intel.com
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch
from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip
rerere cache update")]
This is a huge, chaotic mass of registers copied over as-is without any
real cleanup. We'll come back and organize these better, align on
consistent coding style, remove dead code, etc. in separate patches
later that will be easier to review.
v2:
- Add missing include in intel_pxp_irq.c
v3:
- Correct a few indentation errors (Lucas)
- Minor conflict resolution
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com
We want to remove more members of i915_vma, which requires the locking to
be held more often.
Start requiring gem object lock for i915_vma_unbind, as it's one of the
callers that may unpin pages.
Some special care is needed when evicting, because the last reference to
the object may be held by the VMA, so after __i915_vma_unbind, vma may be
garbage, and we need to cache vma->obj before unlocking.
Changes since v1:
- Make trylock failing a WARN. (Matt)
- Remove double i915_vma_wait_for_bind() (Matt)
- Move atomic_set to right before mutex_unlock(), to make it more clear
they belong together. (Matt)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114132320.109030-5-maarten.lankhorst@linux.intel.com
Because we will start to require the obj->resv lock for unbinding,
ensure these vma eviction utility functions also take the lock.
This requires some function signature changes, to ensure that the
ww context is passed around, but is mostly straightforward.
Previously this was split up into several patches, but reworking
should allow for easier bisection.
Changes since v1:
- Handle evicting dead objects better.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114132320.109030-4-maarten.lankhorst@linux.intel.com
Maarten needs backmerge to account for header file renames/changes which
landed via drm-intel-next and are interfering with his pinning work.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Implement async (non-blocking) unbinding by not syncing the vma before
calling unbind on the vma_resource.
Add the resulting unbind fence to the object's dma_resv from where it is
picked up by the ttm migration code.
Ideally these unbind fences should be coalesced with the migration blit
fence to avoid stalling the migration blit waiting for unbind, as they
can certainly go on in parallel, but since we don't yet have a
reasonable data structure to use to coalesce fences and attach the
resulting fence to a timeline, we defer that for now.
Note that with async unbinding, even while the unbind waits for the
preceding bind to complete before unbinding, the vma itself might have been
destroyed in the process, clearing the vma pages. Therefore we can
only allow async unbinding if we have a refcounted sg-list and keep a
refcount on that for the vma resource pages to stay intact until
binding occurs. If this condition is not met, a request for an async
unbind is diverted to a sync unbind.
v2:
- Use a separate kmem_cache for vma resources for now to isolate their
memory allocation and aid debugging.
- Move the check for vm closed to the actual unbinding thread. Regardless
of whether the vm is closed, we need the unbind fence to properly wait
for capture.
- Clear vma_res::vm on unbind and update its documentation.
v4:
- Take cache coloring into account when searching for vma resources
pending unbind. (Matthew Auld)
v5:
- Fix timeout and error check in i915_vma_resource_bind_dep_await().
- Avoid taking a reference on the object for async binding if
async unbind capable.
- Fix braces around a single-line if statement.
v6:
- Fix up the cache coloring adjustment. (Kernel test robot <lkp@intel.com>)
- Don't allow async unbinding if the vma_res pages are not the same as
the object pages. (Matthew Auld)
v7:
- s/unsigned long/u64/ in a number of places (Matthew Auld)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110172219.107131-5-thomas.hellstrom@linux.intel.com
When introducing asynchronous unbinding, the vma itself may no longer
be alive when the actual binding or unbinding takes place.
Update the gtt i915_vma_ops accordingly to take a struct i915_vma_resource
instead of a struct i915_vma for the bind_vma() and unbind_vma() ops.
Similarly change the insert_entries() op for struct i915_address_space.
Replace a couple of i915_vma_snapshot members with their newly introduced
i915_vma_resource counterparts, since they have the same lifetime.
Also make sure to avoid changing the struct i915_vma_flags (in particular
the bind flags) async. That should now only be done sync under the
vm mutex.
v2:
- Update the vma_res::bound_flags when binding to the aliased ggtt
v6:
- Remove I915_VMA_ALLOC_BIT (Matthew Auld)
- Change some members of struct i915_vma_resource from unsigned long to u64
(Matthew Auld)
v7:
- Fix vma resource size parameters to be u64 rather than unsigned long
(Matthew Auld)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110172219.107131-3-thomas.hellstrom@linux.intel.com
GGTT is currently available both through i915->ggtt and gt->ggtt, and we
eventually want to get rid of the i915->ggtt one.
Use to_gt() for all i915->ggtt accesses to help with the future
refactoring.
During the probe of i915 the early intiialization of the gt
(intel_gt_init_hw_early()) is moved prior to any access to the
ggtt. This because it's in that moment we assign the ggtt to the
gt and we want to do that before using it.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211221195946.3180-1-andi.shyti@linux.intel.com
Driver Changes:
- Added bits of DG2 support around page table handling (Stuart Summers, Matthew Auld)
- Fixed wakeref leak in PMU busyness during reset in GuC mode (Umesh Nerlige Ramappa)
- Fixed debugfs access crash if GuC failed to load (John Harrison)
- Bring back GuC error log to error capture, undoing accidental earlier breakage (Thomas Hellström)
- Fixed memory leak in error capture caused by earlier refactoring (Thomas Hellström)
- Exclude reserved stolen from driver use (Chris Wilson)
- Add memory region sanity checking and optional full test (Chris Wilson)
- Fixed buffer size truncation in TTM shmemfs backend (Robert Beckett)
- Use correct lock and don't overwrite internal data structures when stealing GuC context ids (Matthew Brost)
- Don't hog IRQs when destroying GuC contexts (John Harrison)
- Make GuC to Host communication more robust (Matthew Brost)
- Continuation of locking refactoring around VMA and backing store handling (Maarten Lankhorst)
- Improve performance of reading GuC log from debugfs (John Harrison)
- Log when GuC fails to reset an engine (John Harrison)
- Speed up GuC/HuC firmware loading by requesting RP0 (Vinay Belgaumkar)
- Further work on asynchronous VMA unbinding (Thomas Hellström, Christian König)
- Refactor GuC/HuC firmware handling to prepare for future platforms (John Harrison)
- Prepare for future different GuC/HuC firmware signing key sizes (Daniele Ceraolo Spurio, Michal Wajdeczko)
- Add noreclaim annotations (Matthew Auld)
- Remove racey GEM_BUG_ON between GPU reset and GuC communication handling (Matthew Brost)
- Refactor i915->gt with to_gt(i915) to prepare for future platforms (Michał Winiarski, Andi Shyti)
- Increase GuC log size for CONFIG_DEBUG_GEM (John Harrison)
- Fixed engine busyness in selftests when in GuC mode (Umesh Nerlige Ramappa)
- Make engine parking work with PREEMPT_RT (Sebastian Andrzej Siewior)
- Replace X86_FEATURE_PAT with pat_enabled() (Lucas De Marchi)
- Selftest for stealing of guc ids (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YcRvKO5cyPvIxVCi@tursulin-mobl2
Big delta, but boils down to moving set_pages to i915_vma.c, and removing
the special handling, all callers use the defaults anyway. We only remap
in ggtt, so default case will fall through.
Because we still don't require locking in i915_vma_unpin(), handle this by
using xchg in get_pages(), as it's locked with obj->mutex, and cmpxchg in
unpin, which only fails if we race a against a new pin.
Changes since v1:
- aliasing gtt sets ZERO_SIZE_PTR, not -ENODEV, remove special case
from __i915_vma_get_pages(). (Matt)
Changes since v2:
- Free correct old pages in __i915_vma_get_pages(). (Matt)
Remove race of clearing vma->pages accidentally from put,
free it but leave it set, as only get has the lock.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216142749.1966107-4-maarten.lankhorst@linux.intel.com
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-5-andi.shyti@linux.intel.com
On some platforms the hw has dropped support for 4K GTT pages when
dealing with LMEM, and due to the design of 64K GTT pages in the hw, we
can only mark the *entire* page-table as operating in 64K GTT mode,
since the enable bit is still on the pde, and not the pte. And since we
we still need to allow 4K GTT pages for SMEM objects, we can't have a
"normal" 4K page-table with scratch pointing to LMEM, since that's
undefined from the hw pov. The simplest solution is to just move the 64K
scratch page to SMEM on such platforms and call it a day, since that
should work for all configurations.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208141613.7251-4-ramalingam.c@intel.com
Certain functions within i915 uses macros that are defined for
specific architectures by the mmu, such as _PAGE_RW and _PAGE_PRESENT
(Some architectures don't even have these macros defined, like ARM64).
Instead of re-using bits defined for the CPU, we should use bits
defined for i915. This patch introduces two new 64 bit macros,
GEN8_PAGE_PRESENT and GEN8_PAGE_RW, to check for bits 0 and 1 and, to
replace all occurrences of _PAGE_RW and _PAGE_PRESENT within i915.
v2(Michael Cheng): Use GEN8_ instead of I915_
Signed-off-by: Michael Cheng <michael.cheng@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
[ Move defines together with other GEN8 defines ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211206215245.513677-2-michael.cheng@intel.com
With both integrated and discrete Intel GPUs in a system, the current
global check of intel_iommu_gfx_mapped, as done from intel_vtd_active()
may not be completely accurate.
In this patch we add i915 parameter to intel_vtd_active() in order to
prepare it for multiple GPUs and we also change the check away from Intel
specific intel_iommu_gfx_mapped (global exported by the Intel IOMMU
driver) to probing the presence of IOMMU on a specific device using
device_iommu_mapped().
This will return true both for IOMMU pass-through and address translation
modes which matches the current behaviour. If in the future we wanted to
distinguish between these two modes we could either use
iommu_get_domain_for_dev() and check for __IOMMU_DOMAIN_PAGING bit
indicating address translation, or ask for a new API to be exported from
the IOMMU core code.
v2:
* Check for dmar translation specifically, not just iommu domain. (Baolu)
v3:
* Go back to plain "any domain" check for now, rewrite commit message.
v4:
* Use device_iommu_mapped. (Robin, Baolu)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211126141424.493753-1-tvrtko.ursulin@linux.intel.com
Don't include stuff on behalf of users if they're not strictly necessary
for the header.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7bcaa1684587b9b008d3c41468fb40e63c54fbc7.1636977089.git.jani.nikula@intel.com
So far the remapped view size in GTT/DPT was padded to the next aligned
offset unnecessarily after the last color plane with an unaligned size.
Remove the unnecessary padding.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Fixes: 3d1adc3d64 ("drm/i915/adlp: Add support for remapping CCS FBs")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-3-imre.deak@intel.com
(cherry picked from commit 6b6636e176)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Factor out functions that are needed by the next patch to suspend/resume
the memory mappings for DPT FBs.
No functional change, except reordering during suspend the
ggtt->invalidate(ggtt) call wrt. atomic_set(&ggtt->vm.open, open) and
mutex_unlock(&ggtt->vm.mutex). This shouldn't matter due to the i915
suspend sequence being single threaded.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211101183551.3580546-1-imre.deak@intel.com
During remapping CCS FBs the CCS AUX surface mapped size and offset->x,y
coordinate calculations assumed a tiled layout. This works as long as
the CCS surface height is aligned to 64 lines (ensuring a 4k bytes CCS
surface tile layout). However this alignment is not required by the HW
(and the driver doesn't enforces it either).
Add the remapping logic required to remap the pages of CCS surfaces
without the above alignment, assuming the natural linear layout of the
CCS surface (vs. tiled main surface layout).
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 3d1adc3d64 ("drm/i915/adlp: Add support for remapping CCS FBs")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-5-imre.deak@intel.com
Factor out functions needed to map contiguous FB obj pages to a GTT/DPT
VMA view in the next patch.
While at it s/4096/I915_GTT_PAGE_SIZE/ in add_padding_pages().
No functional changes.
v2: s/4096/I915_GTT_PAGE_SIZE/ (Matthew)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-4-imre.deak@intel.com
So far the remapped view size in GTT/DPT was padded to the next aligned
offset unnecessarily after the last color plane with an unaligned size.
Remove the unnecessary padding.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Fixes: 3d1adc3d64 ("drm/i915/adlp: Add support for remapping CCS FBs")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-3-imre.deak@intel.com
UAPI Changes:
- Add uAPI for using PXP protected objects
Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8064
- Add PCI IDs and LMEM discovery/placement uAPI for DG1
Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11584
- Disable engine bonding on Gen12+ except TGL, RKL and ADL-S
Cross-subsystem Changes:
- Merges 'tip/locking/wwmutex' branch (core kernel tip)
- "mei: pxp: export pavp client to me client bus"
Core Changes:
- Update ttm_move_memcpy for async use (Thomas)
Driver Changes:
- Enable GuC submission by default on DG1 (Matt B)
- Add PXP (Protected Xe Path) support for Gen12 integrated (Daniele,
Sean, Anshuman)
See "drm/i915/pxp: add PXP documentation" for details!
- Remove force_probe protection for ADL-S (Raviteja)
- Add base support for XeHP/XeHP SDV (Matt R, Stuart, Lucas)
- Handle DRI_PRIME=1 on Intel igfx + Intel dgfx hybrid graphics setup (Tvrtko)
- Use Transparent Hugepages when IOMMU is enabled (Tvrtko, Chris)
- Implement LMEM backup and restore for suspend / resume (Thomas)
- Report INSTDONE_GEOM values in error state for DG2 (Matt R)
- Add DG2-specific shadow register table (Matt R)
- Update Gen11/Gen12/XeHP shadow register tables (Matt R)
- Maintain backward-compatible nested batch behavior on TGL+ (Matt R)
- Add new LRI reg offsets for DG2 (Akeem)
- Initialize unused MOCS entries to device specific values (Ayaz)
- Track and use the correct UC MOCS index on Gen12 (Ayaz)
- Add separate MOCS table for Gen12 devices other than TGL/RKL (Ayaz)
- Simplify the locking and eliminate some RCU usage (Daniel)
- Add some flushing for the 64K GTT path (Matt A)
- Mark GPU wedging on driver unregister unrecoverable (Janusz)
- Major rework in the GuC codebase, simplify locking and add docs (Matt B)
- Add DG1 GuC/HuC firmwares (Daniele, Matt B)
- Remember to call i915_sw_fence_fini on guc_state.blocked (Matt A)
- Use "gt" forcewake domain name for error messages instead of "blitter" (Matt R)
- Drop now duplicate LMEM uAPI RFC kerneldoc section (Daniel)
- Fix early tracepoints for requests (Matt A)
- Use locked access to ctx->engines in set_priority (Daniel)
- Convert gen6/gen7/gen8 read operations to fwtable (Matt R)
- Drop gen11/gen12 specific mmio write handlers (Matt R)
- Drop gen11 specific mmio read handlers (Matt R)
- Use designated initializers for init/exit table (Kees)
- Fix syncmap memory leak (Matt B)
- Add pretty printing for buddy allocator state debug (Matt A)
- Fix potential error pointer dereference in pinned_context() (Dan)
- Remove IS_ACTIVE macro (Lucas)
- Static code checker fixes (Nathan)
- Clean up disabled warnings (Nathan)
- Increase timeout in i915_gem_contexts selftests 5x for GuC submission (Matt B)
- Ensure wa_init_finish() is called for ctx workaround list (Matt R)
- Initialize L3CC table in mocs init (Sreedhar, Ayaz, Ram)
- Get PM ref before accessing HW register (Vinay)
- Move __i915_gem_free_object to ttm_bo_destroy (Maarten)
- Deduplicate frequency dump on debugfs (Lucas)
- Make wa list per-gt (Venkata)
- Do not define dummy vma in stack (Venkata)
- Take pinning into account in __i915_gem_object_is_lmem (Matt B, Thomas)
- Do not report currently active engine when describing objects (Tvrtko)
- Fix pdfdocs build error by removing nested grid from GuC docs (Akira)
- Remove false warning from the rps worker (Tejas)
- Flush buffer pools on driver remove (Janusz)
- Fix runtime pm handling in i915_gem_shrink (Maarten)
- Rework TTM object initialization slightly (Thomas)
- Use fixed offset for PTEs location (Michal Wa)
- Verify result from CTB (de)register action and improve error messages (Michal Wa)
- Fix bug in user proto-context creation that leaked contexts (Matt B)
- Re-use Gen11 forcewake read functions on Gen12 (Matt R)
- Make shadow tables range-based (Matt R)
- Ditch the i915_gem_ww_ctx loop member (Thomas, Maarten)
- Use NULL instead of 0 where appropriate (Ville)
- Rename pci/debugfs functions to respect file prefix (Jani, Lucas)
- Drop guc_communication_enabled (Daniele)
- Selftest fixes (Thomas, Daniel, Matt A, Maarten)
- Clean up inconsistent indenting (Colin)
- Use direction definition DMA_BIDIRECTIONAL instead of
PCI_DMA_BIDIRECTIONAL (Cai)
- Add "intel_" as prefix in set_mocs_index() (Ayaz)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YWAO80MB2eyToYoy@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
We assumed that for all modern GENs the PTEs and register space are
split in the GTTMMADR BAR, but while it is true, we should rather use
fixed offset as it is defined in the specification.
Bspec: 4409, 4457, 4604, 11181, 9027, 13246, 13321, 44980
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926201005.1450-1-michal.wajdeczko@intel.com
We really only need memcpy restore for objects that affect the
operability of the migrate context. That is, primarily the page-table
objects of the migrate VM.
Add an object flag, I915_BO_ALLOC_PM_EARLY for objects that need early
restores using memcpy and a way to assign LMEM page-table object flags
to be used by the vms.
Restore objects without this flag with the gpu blitter and only objects
carrying the flag using TTM memcpy.
Initially mark the migrate, gt, gtt and vgpu vms to use this flag, and
defer for a later audit which vms actually need it. Most importantly, user-
allocated vms with pinned page-table objects can be restored using the
blitter.
Performance-wise memcpy restore is probably as fast as gpu restore if not
faster, but using gpu restore will help tackling future restrictions in
mappable LMEM size.
v4:
- Don't mark the aliasing ppgtt page table flags for early resume, but
rather the ggtt page table flags as intended. (Matthew Auld)
- The check for user buffer objects during early resume is pointless, since
they are never marked I915_BO_ALLOC_PM_EARLY. (Matthew Auld)
v5:
- Mark GuC LMEM objects with I915_BO_ALLOC_PM_EARLY to have them restored
before we fire up the migrate context.
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-8-thomas.hellstrom@linux.intel.com
Add support for remapping CCS FBs on ADL-P to remove the restriction
of the power-of-two sized stride and the 2MB surface offset alignment
for these FBs.
We can only remap the tiles on the main surface, not the tiles on the
CCS surface, so userspace has to generate the CCS surface aligning to
the POT size padded main surface stride (by programming the AUX
pagetable accordingly). For the required AUX pagetable setup, this
requires that either the main surface stride is 8 tiles or that the
stride is 16 tiles aligned (= 64 kbytes, the area mapped by one AUX
PTE).
v2:
- Init intel_remapped_info::plane_alignment only for remapped views and
do this from intel_fb_view_init().
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-6-imre.deak@intel.com
The full audit is quite a bit of work:
- i915_dpt has very simple lifetime (somehow we create a display pagetable vm
per object, so its _very_ simple, there's only ever a single vma in there),
and uses i915_vm_close(), which internally does a i915_vm_put(). No rcu.
Aside: wtf is i915_dpt doing in the intel_display.c garbage collector as a new
feature, instead of added as a separate file with some clean-ish interface.
Also, i915_dpt unfortunately re-introduces some coding patterns from
pre-dma_resv_lock conversion times.
- i915_gem_proto_ctx is fully refcounted and no rcu, all protected by
fpriv->proto_context_lock.
- i915_gem_context is itself rcu protected, and that might leak to anything it
points at. Before
commit cf977e1861
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Dec 2 11:21:40 2020 +0000
drm/i915/gem: Spring clean debugfs
and
commit db80a1294c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Jan 18 11:08:54 2021 +0000
drm/i915/gem: Remove per-client stats from debugfs/i915_gem_objects
we had a bunch of debugfs files that relied on rcu protecting everything, but
those are gone now. The main one was removed even earlier with
There doesn't seem to be anything left that's actually protecting
stuff now that the ctx->vm itself is invariant. See
commit ccbc1b9794
Author: Jason Ekstrand <jason@jlekstrand.net>
Date: Thu Jul 8 10:48:30 2021 -0500
drm/i915/gem: Don't allow changing the VM on running contexts (v4)
Note that we drop the vm refcount before the final release of the gem context
refcount, so this is all very dangerous even without rcu. Note that aside from
later on creating new engines (a defunct feature) and debug output we're never
looked at gem_ctx->vm for anything functional, hence why this is ok.
Fingers crossed.
Preceeding patches removed all vestiges of rcu use from gem_ctx->vm
derferencing to make it clear it's really not used.
The gem_ctx->rcu protection was introduced in
commit a4e7ccdac3
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Oct 4 14:40:09 2019 +0100
drm/i915: Move context management under GEM
The commit message is somewhat entertaining because it fails to
mention this fact completely, and compensates that by an in-commit
changelog entry that claims that ctx->vm is protected by ctx->mutex.
Which was the case _before_ this commit, but no longer after it.
- intel_context holds a full reference. Unfortunately intel_context is also rcu
protected and the reference to the ->vm is dropped before the
rcu barrier - only the kfree is delayed. So again we need to check
whether that leaks anywhere on the intel_context->vm. RCU is only
used to protect intel_context sitting on the breadcrumb lists, which
don't look at the vm anywhere, so we are fine.
Nothing else relies on rcu protection of intel_context and hence is
fully protected by the kref refcount alone, which protects
intel_context->vm in turn.
The breadcrumbs rcu usage was added in
commit c744d50363
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Nov 26 14:04:06 2020 +0000
drm/i915/gt: Split the breadcrumb spinlock between global and contexts
its parent commit added the intel_context rcu protection:
commit 14d1eaf088
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Nov 26 14:04:05 2020 +0000
drm/i915/gt: Protect context lifetime with RCU
given some credence to my claim that I've actually caught them all.
- drm_i915_gem_object's shares_resv_from pointer has a full refcount to the
dma_resv, which is a sub-refcount that's released after the final
i915_vm_put() has been called. Safe.
Aside: Maybe we should have a struct dma_resv_shared which is just dma_resv +
kref as a stand-alone thing. It's a pretty useful pattern which other drivers
might want to copy.
For a bit more context see
commit 4d8151ae53
Author: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Date: Tue Jun 1 09:46:41 2021 +0200
drm/i915: Don't free shared locks while shared
- the fpriv->vm_xa was relying on rcu_read_lock for lookup, but that
was updated in a prep patch too to just be a spinlock-protected
lookup.
- intel_gt->vm is set at driver load in intel_gt_init() and released
in intel_gt_driver_release(). There seems to be some issue that
in some error paths this is called twice, but otherwise no rcu to be
found anywhere. This was added in the below commit, which
unfortunately doesn't explain why this complication exists.
commit e6ba764802
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sat Dec 21 16:03:24 2019 +0000
drm/i915: Remove i915->kernel_context
The proper fix most likely for this is to start using drmm_ at large
scale, but that's also huge amounts of work.
- i915_vma->vm is some real pain, because rcu is rcu protected, at
least in the vma lookup in the context lookup cache in
eb_lookup_vma(). This was added in
commit 4ff4b44cbb
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jun 16 15:05:16 2017 +0100
drm/i915: Store a direct lookup from object handle to vma
This was changed to a radix tree from the hashtable in, but with the
locking unchanged, in
commit d1b48c1e71
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Aug 16 09:52:08 2017 +0100
drm/i915: Replace execbuf vma ht with an idr
In
commit 93159e1235
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Mar 23 09:28:41 2020 +0000
drm/i915/gem: Avoid gem_context->mutex for simple vma lookup
the locking was changed from dev->struct_mutex to rcu, which added
the requirement to rcu protect i915_vma. Somehow this was missed in
review (or I'm completely blind).
Irrespective of all that the vma lookup cache rcu_read_lock grabs a
full reference of the vma and the rcu doesn't leak further. So no
impact on i915_address_space from that.
I have not found any other rcu use for i915_vma, but given that it
seems broken I also didn't bother to do a careful in-depth audit.
Alltogether there's nothing left in-tree anymore which requires that a
pointer deref to an i915_address_space is safe undre rcu_read_lock
only.
rcu protection of i915_address_space was introduced in
commit b32fa81115
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Jun 20 19:37:05 2019 +0100
drm/i915/gtt: Defer address space cleanup to an RCU worker
by mixing up a bugfixing (i915_address_space needs to be released from
a worker) with enabling rcu support. The commit message also seems
somewhat confused, because it talks about cleanup of WC pages
requiring sleep, while the code and linked bugzilla are about a
requirement to take dev->struct_mutex (which yes sleeps but it's a
much more specific problem). Since final kref_put can be called from
pretty much anywhere (including hardirq context through the
scheduler's i915_active cleanup) we need a worker here. Hence that
part must be kept.
Ideally all these reclaim workers should have some kind of integration
with our shrinkers, but for some of these it's rather tricky. Anyway,
that's a preexisting condition in the codeebase that we wont fix in
this patch here.
We also remove the rcu_barrier in ggtt_cleanup_hw added in
commit 60a4233a49
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Jul 29 14:24:12 2019 +0100
drm/i915: Flush the i915_vm_release before ggtt shutdown
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-11-daniel.vetter@ffwll.ch
This reverts the rest of 0edbb9ba1b ("drm/i915: Move cmd parser
pinning to execbuffer"). Now that the only user of i915_gem_object_get_sg
without allow_alloc has been removed, we can drop the parameter. This
portion of the revert was broken into its own patch to aid review.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-4-jason@jlekstrand.net
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-2-lucas.demarchi@intel.com
UAPI Changes:
- Add reworked uAPI for DG1 behind CONFIG_BROKEN (Matt A, Abdiel)
Driver Changes:
- Fix for Gitlab issues #3293 and #3450:
Avoid kernel crash on older L-shape memory machines
- Add Wa_14010733141 (VDBox SFC reset) for Gen11+ (Aditya)
- Fix crash in auto_retire active retire callback due to
misalignment (Stephane)
- Fix overlay active retire callback alignment (Tvrtko)
- Eliminate need to align active retire callbacks (Matt A, Ville,
Daniel)
- Program FF_MODE2 tuning value for all Gen12 platforms (Caz)
- Add Wa_14011060649 for TGL,RKL,DG1 and ADLS (Swathi)
- Create stolen memory region from local memory on DG1 (CQ)
- Place PD in LMEM on dGFX (Matt A)
- Use WC when default state object is allocated in LMEM (Venkata)
- Determine the coherent map type based on object location (Venkata)
- Use lmem physical addresses for fb_mmap() on discrete (Mohammed)
- Bypass aperture on fbdev when LMEM is available (Anusha)
- Return error value when displayable BO not in LMEM for dGFX (Mohammed)
- Do release kernel context if breadcrumb measure fails (Janusz)
- Hide modparams for compiled-out features (Tvrtko)
- Apply Wa_22010271021 for all Gen11 platforms (Caz)
- Fix unlikely ref count race in arming the watchdog timer (Tvrtko)
- Check actual RC6 enable status in PMU (Tvrtko)
- Fix a double free in gen8_preallocate_top_level_pdp (Lv)
- Use trylock in shrinker for GGTT on BSW VT-d and BXT (Maarten)
- Remove erroneous i915_is_ggtt check for
I915_GEM_OBJECT_UNBIND_VM_TRYLOCK (Maarten)
- Convert uAPI headers to real kerneldoc (Matt A)
- Clean up kerneldoc warnings headers (Matt A, Maarten)
- Fail driver if LMEM training failed (Matt R)
- Avoid div-by-zero on Gen2 (Ville)
- Read C0DRB3/C1DRB3 as 16 bits again and add _BW suffix (Ville)
- Remove reference to struct drm_device.pdev (Thomas)
- Increase separation between GuC and execlists code (Chris, Matt B)
- Use might_alloc() (Bernard)
- Split DGFX_FEATURES from GEN12_FEATURES (Lucas)
- Deduplicate Wa_22010271021 programming on (Jose)
- Drop duplicate WaDisable4x2SubspanOptimization:hsw (Tvrtko)
- Selftest improvements (Chris, Hsin-Yi, Tvrtko)
- Shuffle around init_memory_region for stolen (Matt)
- Typo fixes (wengjianfeng)
[airlied: fix conflict with fixes in i915_active.c]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YLCbBR22BsQ/dpJB@jlahtine-mobl.ger.corp.intel.com
We are currently sharing the VM reservation locks across a number of
gem objects with page-table memory. Since TTM will individiualize the
reservation locks when freeing objects, including accessing the shared
locks, make sure that the shared locks are not freed until that is done.
For PPGTT we add an additional refcount, for GGTT we take additional
measures to make sure objects sharing the GGTT reservation lock are
freed at GGTT takedown
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210601074654.3103-3-thomas.hellstrom@linux.intel.com
Add support for DPT (display page table). DPT is a
slightly peculiar two level page table scheme used for
tiled scanout buffers (linear uses direct ggtt mapping
still). The plane surface address will point at a page
in the DPT which holds the PTEs for 512 actual pages.
Thus we require 1/512 of the ggttt address space
compared to a direct ggtt mapping.
We create a new DPT address space for each framebuffer and
track two vmas (one for the DPT, another for the ggtt).
TODO:
- Is the i915_address_space approaach sane?
- Maybe don't map the whole DPT to write the PTEs?
- Deal with remapping/rotation? Need to create a
separate DPT for each remapped/rotated plane I
guess. Or else we'd need to make the per-fb DPT
large enough to support potentially several
remapped/rotated vmas. How large should that be?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Cc: Wilson Chris P <Chris.P.Wilson@intel.com>
Cc: Tang CQ <cq.tang@intel.com>
Cc: Auld Matthew <matthew.auld@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Wilson Chris P <Chris.P.Wilson@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506161930.309688-5-imre.deak@intel.com
We need to generalise our accessor for the page directories and tables from
using the simple kmap_atomic to support local memory, and this setup
must be done on acquisition of the backing storage prior to entering
fence execution contexts. Here we replace the kmap with the object
mapping code that for simple single page shmemfs object will return a
plain kmap, that is then kept for the lifetime of the page directory.
Note that keeping the mapping around is a potential concern here, since
while the vma is pinned the mapping remains there for the PDs
underneath, or at least until the used_count reaches zero, at which
point we can safely destroy the mapping. For 32b this will be even worse
since the address space is more limited, but since this change mostly
impacts full ppGTT platforms, the justification is that for modern
platforms we shouldn't care too much about 32b.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-3-matthew.auld@intel.com
Driver Changes:
- Prepare for local/device memory support on DG1 by starting
to use it for kernel internal allocations: context, ring
and engine scratch (Matt A, CQ, Abdiel, Imre)
- Sandybridge fix to avoid hard hang on ring resume (Chris)
- Limit imported dma-buf size to int32 (Matt A)
- Double check heartbeat timeout before resetting (Chris)
- Use new tasklet API for execution list (Emil)
- Fix SPDX checkpats warnings (Chris)
- Fixes for various checkpatch warnings (Chris)
- Selftest improvements (Chris)
- Move the defer_request waiter active assertion to correct spot (Chris)
- Make local-memory probing a GT operation (Matt, Tvrtko)
- Protect against request freeing during cancellation on wedging (Chris)
- Retire unexpected starting state error dumping (Chris)
- Distinction of memory regions in debugging (Zbigniew)
- Always flush the submission queue on checking for idle (Chris)
- Consolidate 2big error check to helper (Matt)
- Decrease number of subplatform bits (Tvrtko)
- Remove unused internal request priority levels (Chris)
- Document the unused internal header bits in buddy allocator (Matt)
- Cleanup the region class/instance encoding (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YGxksaZGXHnFxlwg@jlahtine-mobl.ger.corp.intel.com
An upcoming platform has a restriction that the FB stride must be
power-of-two aligned. To support framebuffer layouts that are not in
this layout add a logic that pads the tile rows to the POT aligned size.
The HW won't read the padding PTEs, so these don't have to point to an
allocated address, or even have their valid flag set. So use a NULL PTE
instead for instance the scratch page, which is simple and keeps the SG
table compact.
v2:
- Simplify plane_view_dst_stride(). (Ville)
- Pass pitch_tiles as unsigned int.
v3:
- Drop unintentional s/plane_state->rotation/plane_config->rotation/
change.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-24-imre.deak@intel.com
