We need to inform PCODE of a desired ring frequencies so PCODE update
the memory frequencies to us. rps->min_freq and rps->max_freq are the
frequencies used in that request. However they were unset when SLPC was
enabled and PCODE never updated the memory freq.
v2 (as Suggested by Ashutosh): if SLPC is in use, let's pick the right
frequencies from the get_ia_constants instead of the fake init of
rps' min and max.
v3: don't forget the max <= min return
v4: Move all the freq conversion to intel_rps.c. And the max <= min
check to where it belongs.
v5: (Ashutosh) Fix old comment s/50 HZ/50 MHz and add a doc explaining
the "raw format"
Fixes: 7ba79a6715 ("drm/i915/guc/slpc: Gate Host RPS when SLPC is enabled")
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Tested-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220831214538.143950-1-rodrigo.vivi@intel.com
Freq caps (i.e. RP0, RP1 and RPn frequencies) are read from HW. However the
formats (bit positions, widths, registers and units) of these vary for
different generations with even more variations arriving in the future. In
order not to have to do identical computation for these caps in multiple
places, here we centralize the computation of these caps. This makes the
code cleaner and also more extensible for the future.
v2: Clarify that caps are in "hw units" in comments (Lucas De Marchi)
v3: Minor checkpatch fix
v4: s/intel_rps_get_freq_caps/gen6_rps_get_freq_caps/ (Badal Nilawar)
v5: Changes comments to kernel doc (Anshuman Gupta)
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406191848.20895-1-ashutosh.dixit@intel.com
Throttling here refers to the GT frequency being clipped. Each of
the throttle reason attributes will have a 0 or 1 value depending
upon whether there is throttling and also the specific reason for
it.
The following is a brief description of the sysfs throttle
frequency attributes added:
- throttle_reason_status: when set indicates that there is GT
frequency clipping.
- throttle_reason_pl1: when set indicates that PBM PL1 (platform
or package PL1) has caused GT frequency clipping.
- throttle_reason_pl2: when set indicates that PBM PL2 or PL3
(platform or package PL2 or PL3) has caused GT frequency
clipping.
- throttle_reason_pl4: when set indicates that PL4 or IccMax has
caused GT frequency clipping.
- throttle_reason_thermal: when set indicates that Thermal event
has caused GT frequency clipping.
- throttle_reason_prochot: when set indicates that PROCHOT# has
caused GT frequency clipping.
- throttle_reason_ratl: when set indicates that Running Average
Thermal Limit has caused GT frequency clipping.
- throttle_reason_vr_thermalert: when set indicates that Hot VR
(any processor VR) has caused GT frequency clipping.
- throttle_reason_vr_tdc: when set indicates that VR TDC
(Thermal Design Current) has caused GT frequency clipping.
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Dale B Stimson <dale.b.stimson@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-8-andi.shyti@linux.intel.com
By default, GT (and GuC) run at RPn. Requesting for RP0
before firmware load can speed up DMA and HuC auth as well.
In addition to writing to 0xA008, we also need to enable
swreq in 0xA024 so that Punit will pay heed to our request.
SLPC will restore the frequency back to RPn after initialization,
but we need to manually do that for the non-SLPC path.
We don't need a manual override in the SLPC disabled case, just
use the intel_rps_set function to ensure consistent RPS state.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216233022.21351-1-vinay.belgaumkar@intel.com
Add a helper to sort through the SLPC/RPS paths of get/set methods.
Boost frequency will be modified as long as it is within the constraints
of RP0 and if it is different from the existing one. We will set min
freq to boost only if there is at least one active waiter.
v2: Add num_boosts to guc_slpc_info and changes for worker function
v3: Review comments (Ashutosh)
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211102012608.8609-4-vinay.belgaumkar@intel.com
Add helper in RPS code for handling SLPC and non-SLPC paths.
When boost is requested in the SLPC path, we can ask GuC to ramp
up the frequency req by setting the minimum frequency to boost freq.
Reset freq back to the min softlimit when there are no more waiters.
v2: Schedule a worker thread which can boost freq from within
an interrupt context as well.
v3: No need to check against requested freq before scheduling boost
work (Ashutosh)
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211102012608.8609-3-vinay.belgaumkar@intel.com
Update the get/set min/max freq hooks to work for
SLPC case as well. Consolidate helpers for requested/min/max
frequency get/set to intel_rps where the proper action can
be taken depending on whether SLPC is enabled.
v2: Add wrappers for getting rp0/1/n frequencies, update
softlimits in set min/max SLPC functions. Also check for
boundary conditions before setting them.
v3: Address review comments (Michal W)
v4: Add helper for host part of intel_rps_set_freq helpers (Michal W)
v5: checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-13-vinay.belgaumkar@intel.com
As with the realisation for soft-rc6, we respond to idling the engines
within microseconds, far faster than the response times for HW RC6 and
RPS. Furthermore, our fast parking upon idle, prevents HW RPS from
running for many desktop workloads, as the RPS evaluation intervals are
on the order of tens of milliseconds, but the typical workload is just a
couple of milliseconds, but yet we still need to determine the best
frequency for user latency versus power.
Recognising that the HW evaluation intervals are a poor fit, and that
they were deprecated [in bspec at least] from gen10, start to wean
ourselves off them and replace the EI with a timer and our accurate
busy-stats. The principle benefit of manually evaluating RPS intervals
is that we can be more responsive for better performance and powersaving
for both spiky workloads and steady-state.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1698
Fixes: 98479ada42 ("drm/i915/gt: Treat idling as a RPS downclock event")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-4-chris@chris-wilson.co.uk
Add two helpers that for reading the actual GT's frequency. The
two helpers are:
- intel_rps_read_cagf: reads the frequency and returns it not
normalized
- intel_rps_read_actual_frequency: provides the frequency in Hz.
Use the above helpers in sysfs and debugfs.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213183736.31992-2-andi@etezian.org
i915_irq.c is large. One reason for this is that has a large chunk of
the GT render power management stashed away in it. Extract that logic
out of i915_irq.c and intel_pm.c and put it under one roof.
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024211642.7688-1-chris@chris-wilson.co.uk