HuC loading via GSC is performed via a PXP command sent through the mei
modules, so we need both MEI_GSC and MEI_PXP to be available. Given that
the GSC will do both the transfer and the authentication, the legacy HuC
loading paths can be safely skipped.
Also note that the GSC-loaded HuC survives GT reset.
v2: move the huc_is_authenticated() function to this patch.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504204816.2082588-4-daniele.ceraolospurio@intel.com
The function name is confusing, because it doesn't check the actual auth
status in HW but the SW status. Given that there is only one user (the
huc_auth function itself), just get rid of it and use the FW status
checker directly.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504204816.2082588-2-daniele.ceraolospurio@intel.com
Several of our i915 header files, have been including i915_reg.h. This
means that any change to i915_reg.h will trigger a full rebuild of
pretty much every file of the driver, even those that don't have any
kind of register access. Let's delete the i915_reg.h include from all
headers and add an explicit include from the .c files that truly
need the register definitions; those that need a definition of
i915_reg_t for a function definition can get it from i915_reg_defs.h
instead.
We also remove two non-register #define's (VLV_DISPLAY_BASE and
GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the
i915_reg.h include from a couple of headers.
There's probably a lot more header dependency optimization possible, but
the changes here roughly cut the number of files compiled after 'touch
i915_reg.h' in half --- a good first step.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com
Some of the newer HW will use bigger RSA keys to authenticate the GuC
binary. On those platforms the HW will read the key from memory instead
of the RSA registers, so we need to copy it in a dedicated vma, like we
do for the HuC. The address of the key is provided to the HW via the
first RSA register.
v2: clarify that the RSA behavior is hardcoded in the bootrom (Matt)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211211000756.1698923-4-daniele.ceraolospurio@intel.com
Move the printers to the respective files for clarity. The
guc_load_status debugfs has been squashed in the guc_info one, has
having separate ones wasn't very useful. The HuC debugfs has been
renamed huc_info to match.
v2: keep printing HUC_STATUS2 (Tony), avoid const->non-const
container_of (Jani)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326181121.16869-5-daniele.ceraolospurio@intel.com
To be able to setup GuC submission functions during engine init we need
to commit to using GuC as soon as possible.
Currently, the only thing that can stop us from using the
microcontrollers once we've fetched the blobs is a fundamental
error (e.g. OOM); given that if we hit such an error we can't really
fall-back to anything, we can "officialize" the FW fetching completion
as the moment at which we're committing to using GuC.
To better differentiate this case, the uses_guc check, which indicates
that GuC is supported and was selected in modparam, is renamed to
wants_guc and a new uses_guc is introduced to represent the case were
we're committed to using the GuC. Note that uses_guc does still not imply
that the blob is actually loaded on the HW (is_running is the check for
that). Also, since we need to have attempted the fetch for the result
of uses_guc to be meaningful, we need to make sure we've moved away
from INTEL_UC_FIRMWARE_SELECTED.
All the GuC changes have been mirrored on the HuC for coherency.
v2: split fetch return changes and new macros to their own patches,
support HuC only if GuC is wanted, improve "used" state
description (Michal)
v3: s/wants_huc/uses_huc in uc_init_wopcm
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Fernando Pacheco <fernando.pacheco@intel.com> #v1
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-6-daniele.ceraolospurio@intel.com
We really need to have separate NOT_SUPPORTED state (for
lack of hardware support) and DISABLED state (to indicate
user decision) as we will have to take special steps even
if GuC firmware is now disabled but hardware exists and
could have been previously used.
v2: fix logic (Chris/CI)
v3: use proper check to avoid probe failure (CI)
v4: explain status transitions (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816205658.15020-1-michal.wajdeczko@intel.com
Include 2019 in copyright years and start using SPDX tag.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812092935.21048-1-michal.wajdeczko@intel.com
We can use value of enable_guc modparam during firmware path selection
and start using firmware status to see if GuC/HuC is being used.
This is first step to make enable_guc modparam read-only.
v2: rebased, don't care about <0 (Chris)
v3: oops
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731223321.36436-3-michal.wajdeczko@intel.com
The binary is perma-pinned and the rsa is not going to change, so copy
it only once and not on every load.
v2: onion unwind (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-7-daniele.ceraolospurio@intel.com
We currently track fetch and load status separately, but the 2 are
actually sequential in the uc lifetime (fetch must complete before we
can attempt the load!). Unifying the 2 variables we can better follow
the sequential states and improve our trackng of the uC state.
Also, sprinkle some GEM_BUG_ON to make sure we transition correctly
between states.
v2: rename states, add the running state (Michal), drop some logs in
the fetch path (Michal, Chris)
v3: re-rename states, extend early status check to all helpers (Michal)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-5-daniele.ceraolospurio@intel.com
Both microcontrollers are part of the GT HW and are closely related to
GT operations. To keep all the files cleanly together, they've been
placed in their own subdir inside the gt/ folder
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-6-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2019-07-13 19:58:23 +01:00
Renamed from drivers/gpu/drm/i915/intel_huc.h (Browse further)
