of_get_mac_address() reads the same "local-mac-address" property.
... But goes above and beyond by checking the MAC value properly.
printk+message seems outdated too,
so let's put dev_err in the queue.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replacing kmalloc/kfree/dma_map_single/dma_unmap_single()
with dma_alloc_coherent/dma_free_coherent() helps to reduce
code size, and simplify the code, and coherent DMA will not
clear the cache every time.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit d437f5aa23.
Code has been duplicated through commit <273c29e944bd> "ibmvnic: check
failover_pending in login response"
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rather than releasing the tx pools on every close and reallocating
them on open, reuse the tx pools unless the pool parameters (number
of pools, size of each pool or size of each buffer in a pool) have
changed.
If the pool parameters changed, then release the old pools (if
any) and allocate new ones.
Specifically release tx pools, if:
- adapter is removed,
- pool parameters change during reset,
- we encounter an error when opening the adapter in response
to a user request (in ibmvnic_open()).
and don't release them:
- in __ibmvnic_close() or
- on errors in __ibmvnic_open()
in the hope that we can reuse them during this or next reset.
With these changes reset_tx_pools() can be dropped because its
optimization is now included in init_tx_pools() itself.
cleanup_tx_pools() releases all the skbs associated with the pool and
is called from ibmvnic_cleanup(), which is called on every reset. Since
we want to reuse skbs across resets, move cleanup_tx_pools() out of
ibmvnic_cleanup() and call it only when user closes the adapter.
Add two new adapter fields, ->prev_mtu, ->prev_tx_pool_size to track the
previous values and use them to decide whether to reuse or realloc the
pools.
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rather than releasing the rx pools on and reallocating them on every
reset, reuse the rx pools unless the pool parameters (number of pools,
size of each pool or size of each buffer in a pool) have changed.
If the pool parameters changed, then release the old pools (if any)
and allocate new ones.
Specifically release rx pools, if:
- adapter is removed,
- pool parameters change during reset,
- we encounter an error when opening the adapter in response
to a user request (in ibmvnic_open()).
and don't release them:
- in __ibmvnic_close() or
- on errors in __ibmvnic_open()
in the hope that we can reuse them on the next reset.
With these, reset_rx_pools() can be dropped because its optimzation is
now included in init_rx_pools() itself.
cleanup_rx_pools() releases all the skbs associated with the pool and
is called from ibmvnic_cleanup(), which is called on every reset. Since
we want to reuse skbs across resets, move cleanup_rx_pools() out of
ibmvnic_cleanup() and call it only when user closes the adapter.
Add two new adapter fields, ->prev_rx_buf_sz, ->prev_rx_pool_size to
keep track of the previous values and use them to decide whether to
reuse or realloc the pools.
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reuse the long term buffer during a reset as long as its size has
not changed. If the size has changed, free it and allocate a new
one of the appropriate size.
When we do this, alloc_long_term_buff() and reset_long_term_buff()
become identical. Drop reset_long_term_buff().
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a follow-on patch, we will reuse long term buffers when possible.
When doing so we have to be careful to properly assign map ids. We
can no longer assign them sequentially because a lower map id may be
available and we could wrap at 255 and collide with an in-use map id.
Instead, use a bitmap to track active map ids and to find a free map id.
Don't need to take locks here since the map_id only changes during reset
and at that time only the reset worker thread should be using the adapter.
Noticed this when analyzing an error Dany Madden ran into with the
patch set.
Reported-by: Dany Madden <drt@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In init_tx_pools() move some loop-invariant code out of the loop.
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use/rename local variables in init_tx_pools() for consistency with
init_rx_pools() and for readability. Also add some comments
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make the code more readable, use/rename some local variables.
Basically we have a set of pools, num_pools. Each pool has a set of
buffers, pool_size and each buffer is of size buff_size.
pool_size is a bit ambiguous (whether size in bytes or buffers). Add
a comment in the header file to make it explicit.
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add/update some comments/function headers and fix up some messages.
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For better readability, consolidate related code in replenish_rx_pool()
and add some comments.
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a failover occurs before a login response is received, the login
response buffer maybe undefined. Check that there was no failover
before accessing the login response buffer.
Fixes: 032c5e8284 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a failover occurs before a login response is received, the login
response buffer maybe undefined. Check that there was no failover
before accessing the login response buffer.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most users of ndo_do_ioctl are ethernet drivers that implement
the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware
timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP.
Separate these from the few drivers that use ndo_do_ioctl to
implement SIOCBOND, SIOCBR and SIOCWANDEV commands.
This is a purely cosmetic change intended to help readers find
their way through the implementation.
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 65d6470d13 ("ibmvnic: clean pending indirect buffs during reset")
intended to remove the call to ibmvnic_tx_scrq_flush() when the
->resetting flag is true and was tested that way. But during the final
rebase to net-next, the hunk got applied to a block few lines below
(which happened to have the same diff context) and the wrong call to
ibmvnic_tx_scrq_flush() got removed.
Fix that by removing the correct ibmvnic_tx_scrq_flush() and restoring
the one that was incorrectly removed.
Fixes: 65d6470d13 ("ibmvnic: clean pending indirect buffs during reset")
Reported-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Normally, if a reset fails due to failover or other communication error
there is another reset (eg: FAILOVER) in the queue and we would process
that reset. But if we are unable to communicate with PHYP or VIOS after
H_FREE_CRQ, there would be no other resets in the queue and the adapter
would be in an undefined state even though it was in the OPEN state
earlier. While starting the reset we set the carrier to off state so
we won't even get the timeout resets.
If the last queued reset fails, retry it as a hard reset (after the
usual 60 second settling time).
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial conflict in net/netfilter/nf_tables_api.c.
Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.
skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Parenthesize a check to be more explicit and to fix a sparse warning
seen on some distros.
Fixes: 91dc5d2553 ("ibmvnic: fix miscellaneous checks")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Free tx_pool and clear it, if allocation of tso_pool fails.
release_tx_pools() assumes we have both tx and tso_pools if ->tx_pool is
non-NULL. If allocation of tso_pool fails in init_tx_pools(), the assumption
will not be true and we would end up dereferencing ->tx_buff, ->free_map
fields from a NULL pointer.
Fixes: 3205306c6b ("ibmvnic: Update TX pool initialization routine")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
free_long_term_buff() checks ltb->buff to decide whether we have a long
term buffer to free. So set ltb->buff to NULL afer freeing. While here,
also clear ->map_id, fix up some coding style and log an error.
Fixes: 9c4eaabd1b ("Check CRQ command return codes")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a crash in replenish_rx_pool() when called from ibmvnic_poll()
after a previous call to replenish_rx_pool() encountered an error when
allocating a socket buffer.
Thanks to Rick Lindsley and Dany Madden for helping debug the crash.
Fixes: 4f0b6812e9 ("ibmvnic: Introduce batched RX buffer descriptor transmission")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We batch subordinate command response queue (scrq) descriptors that we
need to send to the VIOS using an "indirect" buffer. If after we queue
one or more scrqs in the indirect buffer encounter an error (say fail
to allocate an skb), we leave the queued scrq descriptors in the
indirect buffer until the next call to ibmvnic_xmit().
On the next call to ibmvnic_xmit(), it is possible that the adapter is
going through a reset and it is possible that the long term buffers
have been unmapped on the VIOS side. If we proceed to flush (send) the
packets that are in the indirect buffer, we will end up using the old
map ids and this can cause the VIOS to trigger an unnecessary FATAL
error reset.
Instead of flushing packets remaining on the indirect_buff, discard
(clean) them instead.
Fixes: 0d97338818 ("ibmvnic: Introduce xmit_more support using batched subCRQ hcalls")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 7c451f3ef6.
When a vnic interface is taken down and then up, connectivity is not
restored. We bisected it to this commit. Reverting this commit until
we can fully investigate the issue/benefit of the change.
Fixes: 7c451f3ef6 ("ibmvnic: remove duplicate napi_schedule call in open function")
Reported-by: Cristobal Forno <cforno12@linux.ibm.com>
Reported-by: Abdul Haleem <abdhalee@in.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 1c7d45e7b2.
We tried to optimize the number of hcalls we send and skipped sending
the REQUEST_MAP calls for some maps. However during resets, we need to
resend all the maps to the VIOS since the VIOS does not remember the
old values. In fact we may have failed over to a new VIOS which will
not have any of the mappings.
When we send packets with map ids the VIOS does not know about, it
triggers a FATAL reset. While the client does recover from the FATAL
error reset, we are seeing a large number of such resets. Handling
FATAL resets is lot more unnecessary work than issuing a few more
hcalls so revert the commit and resend the maps to the VIOS.
Fixes: 1c7d45e7b2 ("ibmvnic: simplify reset_long_term_buff function")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP checksums on received packets may be set to NULL by the sender if CSO
is enabled. The hypervisor flags these packets as check-sum-ok and the
skb is then flagged CHECKSUM_UNNECESSARY. If these packets are then
forwarded the sender will not request CSO due to the CHECKSUM_UNNECESSARY
flag. The result is a TCP packet sent with a bad checksum. This change
sets up CHECKSUM_PARTIAL on these packets causing the sender to correctly
request CSUM offload.
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com>
Tested-by: Cristobal Forno <cforno12@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since these strings are expected to be NUL-terminated and the buffers
are exactly sized (in vnic_client_data_len()) with no padding, strncpy()
can be safely replaced with strscpy() here, as strncpy() on
NUL-terminated string is considered deprecated[1]. This has the
side-effect of silencing a -Warray-bounds warning due to the compiler
being confused about the vlcd incrementing:
In file included from ./include/linux/string.h:253,
from ./include/linux/bitmap.h:10,
from ./include/linux/cpumask.h:12,
from ./include/linux/mm_types_task.h:14,
from ./include/linux/mm_types.h:5,
from ./include/linux/buildid.h:5,
from ./include/linux/module.h:14,
from drivers/net/ethernet/ibm/ibmvnic.c:35:
In function '__fortify_strncpy',
inlined from 'vnic_add_client_data' at drivers/net/ethernet/ibm/ibmvnic.c:3919:2:
./include/linux/fortify-string.h:39:30: warning: '__builtin_strncpy' offset 12 from the object at 'v
lcd' is out of the bounds of referenced subobject 'name' with type 'char[]' at offset 12 [-Warray-bo
unds]
39 | #define __underlying_strncpy __builtin_strncpy
| ^
./include/linux/fortify-string.h:51:9: note: in expansion of macro '__underlying_strncpy'
51 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/ibm/ibmvnic.c: In function 'vnic_add_client_data':
drivers/net/ethernet/ibm/ibmvnic.c:3883:7: note: subobject 'name' declared here
3883 | char name[];
| ^~~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Cc: Dany Madden <drt@linux.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Cc: Thomas Falcon <tlfalcon@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 3rd argument is u32 by function definition while it is __be32
by function declaration.
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following kernel build warnings:
drivers/net/ethernet/ibm/ibmvnic.c:1516: warning: Function parameter or member 'skb' not described in 'build_hdr_descs_arr'
drivers/net/ethernet/ibm/ibmvnic.c:1516: warning: Function parameter or member 'indir_arr' not described in 'build_hdr_descs_arr'
drivers/net/ethernet/ibm/ibmvnic.c:1516: warning: Excess function parameter 'txbuff' description in 'build_hdr_descs_arr'
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/ibm/ibmvnic.c: In function ‘adapter_state_to_string’:
drivers/net/ethernet/ibm/ibmvnic.c:855:2: warning: enumeration value ‘VNIC_DOWN’ not handled in switch [-Wswitch]
855 | switch (state) {
| ^~~~~~
drivers/net/ethernet/ibm/ibmvnic.c: In function ‘reset_reason_to_string’:
drivers/net/ethernet/ibm/ibmvnic.c:1958:2: warning: enumeration value ‘VNIC_RESET_PASSIVE_INIT’ not handled in switch [-Wswitch]
1958 | switch (reason) {
| ^~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/ibm/ibmvnic.c: In function ‘handle_vpd_rsp’:
drivers/net/ethernet/ibm/ibmvnic.c:4393:3: warning: ‘strncpy’ output truncated before terminating nul copying 3 bytes from a string of the same length [-Wstringop-truncation]
4393 | strncpy((char *)adapter->fw_version, "N/A", 3 * sizeof(char));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the device to be initialized at a later time if
it is not available at boot. The device will be allowed to probe but
will be given a "down" state. After completing device probe and
registering the net device, the driver will await an interrupt signal
from its partner device, indicating that it is ready for boot. The
driver will schedule a work event to perform the necessary procedure
and begin operation.
Co-developed-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Cristobal Forno <cforno12@linux.ibm.com>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert list_for_each() to list_for_each_entry() where
applicable. This simplifies the code.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return -EFAULT from the error handling case instead of 0, as done
elsewhere in this function.
By the way, when get_zeroed_page() fails, directly return -ENOMEM to
simplify code.
Fixes: 2c69448bbc ("ehea: DLPAR memory add fix")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210528085555.9390-1-thunder.leizhen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This way the compiler warns when a new value is added to the enum but
not to the string translation like:
drivers/net/ethernet/ibm/ibmvnic.c: In function 'adapter_state_to_string':
drivers/net/ethernet/ibm/ibmvnic.c:832:2: warning: enumeration value 'VNIC_FOOBAR' not handled in switch [-Wswitch]
switch (state) {
^~~~~~
drivers/net/ethernet/ibm/ibmvnic.c: In function 'reset_reason_to_string':
drivers/net/ethernet/ibm/ibmvnic.c:1935:2: warning: enumeration value 'VNIC_RESET_FOOBAR' not handled in switch [-Wswitch]
switch (reason) {
^~~~~~
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Link: https://lore.kernel.org/netdev/CAOhMmr701LecfuNM+EozqbiTxFvDiXjFdY2aYeKJYaXq9kqVDg@mail.gmail.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use kobj_to_dev() instead of container_of()
Generated by: scripts/coccinelle/api/kobj_to_dev.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the unnecessary napi_schedule() call in __ibmvnic_open() since
interrupt_rx() calls napi_schedule_prep/__napi_schedule during every
receive interrupt.
Fixes: ed651a1087 ("ibmvnic: Updated reset handling")
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During adapter reset, do_reset/do_hard_reset calls ibmvnic_open(),
which will calls napi_schedule if previous state is VNIC_CLOSED
(i.e, the reset case, and "ifconfig down" case). So there is no need
for do_reset to call napi_schedule again at the end of the function
though napi_schedule will neglect the request if napi is already
scheduled.
Fixes: ed651a1087 ("ibmvnic: Updated reset handling")
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__ibmvnic_open calls napi_disable without checking whether NAPI polling
has already been disabled or not. This could cause napi_disable
being called twice, which could generate deadlock. For example,
the first napi_disable will spin until NAPI_STATE_SCHED is cleared
by napi_complete_done, then set it again.
When napi_disable is called the second time, it will loop infinitely
because no dev->poll will be running to clear NAPI_STATE_SCHED.
To prevent above scenario from happening, call ibmvnic_napi_disable()
which checks if napi is disabled or not before calling napi_disable.
Fixes: bfc32f2973 ("ibmvnic: Move resource initialization to its own routine")
Suggested-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The reset process for ibmvnic commonly takes multiple seconds, clearly
making it inappropriate for schedule_work/system_wq. The reason to make
this change is that ibmvnic's use of the default system-wide workqueue
for a relatively long-running work item can negatively affect other
workqueue users. So, queue the relatively slow reset job to the
system_long_wq.
Suggested-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is more correct to use dev_kfree_skb_irq when packets are dropped,
and to use dev_consume_skb_irq when packets are consumed.
Fixes: 0d97338818 ("ibmvnic: Introduce xmit_more support using batched subCRQ hcalls")
Suggested-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current implementation relies on H_IOCTL call to issue a
H_SESSION_ERR_DETECTED command to let the hypervisor to send a failover
signal. However, it may not work if there is no backup device or if
the vnic is already in error state,
e.g., "ibmvnic 30000003 env3: rx buffer returned with rc 6".
Add a last resort, that is to schedule a failover reset via CRQ command.
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The adapter state can be added or deleted over different versions
of the source code. Print a string instead of a number.
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The reset reason can be added or deleted over different versions
of the source code. Print a string instead of a number.
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit e704f0434e ("ibmvnic: Remove debugfs support") did not
clean up everything. Remove the remaining code.
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
