Representors do not want to be subject to the PF's Ethernet address
filters, since traffic from VFs will typically have a destination
either elsewhere on the link segment or on an overlay network.
So, create a dynamic m-port with promiscuous and all-multicast
filters, and set it as the egress port of representor default rules.
Since the m-port is an alias of the calling PF's own m-port, traffic
will still be delivered to the PF's RXQs, but it will be subject to
the VNRX filter rules installed on the dynamic m-port (specified by
the v-port ID field of the filter spec).
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to be able to drop the efx->filter_sem in ef100_filter_table_up()
so that we can call functions that insert filters (and thus take that
rwsem for read), which means the efx->type->filter_table_probe method
needs to be responsible for taking the lock in the first place.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Default rules are low-priority switching rules which the hardware uses
in the absence of higher-priority rules. Each representor requires a
corresponding rule matching traffic from its representee VF and
delivering to the PF (where a check on INGRESS_MPORT in
__ef100_rx_packet() will direct it to the representor). No rule is
required in the reverse direction, because representor TX uses a TX
override descriptor to bypass the MAE and deliver directly to the VF.
Since inserting any rule into the MAE disables the firmware's own
default rules, also insert a pair of rules to connect the PF to the
physical network port and vice-versa.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Traffic delivered to the (MAE admin) PF could be from either the wire
or a VF. The INGRESS_MPORT field of the RX prefix distinguishes these;
base_mport is the value this field will have for traffic from the wire
(which should be delivered to the PF's netdevice, not a representor).
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One PCIe function per network port (more precisely, per m-port group) is
responsible for configuring the Match-Action Engine which performs
switching and packet modification in the slice to support flower/OVS
offload. The GRP_MAE bit in the privilege mask indicates whether a
given function has this capability.
At probe time, call MCDIs to read the calling function's privilege mask,
and store the GRP_MAE bit in a new ef100_nic_data member.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netdev probe will be used when moving from vDPA to EF100 BAR config.
The netdev remove will be used when moving from EF100 to vDPA BAR config.
In the process, change several log messages to pci_ instead of netif_
to remove the "(unregistered net_device)" text.
Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Co-developed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This avoids a forward declaration in a subsequent patch.
Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Co-developed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code for gso_max_size was added originally to allow for debugging and
workaround of buggy devices that couldn't support TSO with blocks 64K in
size. The original reason for limiting it to 64K was because that was the
existing limits of IPv4 and non-jumbogram IPv6 length fields.
With the addition of Big TCP we can remove this limit and allow the value
to potentially go up to UINT_MAX and instead be limited by the tso_max_size
value.
So in order to support this we need to go through and clean up the
remaining users of the gso_max_size value so that the values will cap at
64K for non-TCPv6 flows. In addition we can clean up the GSO_MAX_SIZE value
so that 64K becomes GSO_LEGACY_MAX_SIZE and UINT_MAX will now be the upper
limit for GSO_MAX_SIZE.
v6: (edumazet) fixed a compile error if CONFIG_IPV6=n,
in a new sk_trim_gso_size() helper.
netif_set_tso_max_size() caps the requested TSO size
with GSO_MAX_SIZE.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drivers should call the TSO setting helper, GSO is controllable
by user space.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends the EF100 PF driver by adding .sriov_configure()
which would allow users to enable and disable virtual functions
using the sriov sysfs.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/75e74d9e-14ce-0524-9668-5ab735a7cf62@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ideally the size would depend on the link speed, but the recycle
ring is created when the interface is brought up before the driver
knows the link speed. So size it for the maximum speed of a given NIC.
PowerPC is only supported on SFN7xxx and SFN8xxx NICs.
With this patch on a 40G NIC the number of calls to alloc_pages and
friends went down from about 18% to under 2%.
On a 10G NIC the number of calls to alloc_pages and friends went down
from about 15% to 0 (perf did not capture any calls during the 60
second test).
On a 100G NIC the number of calls to alloc_pages and friends went down
from about 23% to 4%.
Reported-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220131111054.cp4f6foyinaarwbn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The return value of kmalloc() needs to be checked.
To avoid use in efx_nic_update_stats() in case of the failure of alloc.
Fixes: b593b6f1b4 ("sfc_ef100: statistics gathering")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev->gso_max_segs is written under RTNL protection, or when the device is
not yet visible, but is read locklessly.
Add netif_set_gso_max_segs() helper.
Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_segs()
where we can to better document what is going on.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev->gso_max_size is written under RTNL protection, or when the device is
not yet visible, but is read locklessly.
Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_size()
where we can to better document what is going on.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert all Ethernet drivers from memcpy(... ETH_ADDR)
to eth_hw_addr_set():
@@
expression dev, np;
@@
- memcpy(dev->dev_addr, np, ETH_ALEN)
+ eth_hw_addr_set(dev, np)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can treat SKB_GSO_GRE almost exactly the same as UDP tunnels, except
that we don't want to edit the outer UDP len (as there isn't one).
For SKB_GSO_GRE_CSUM, we have to use GSO_PARTIAL as the device doesn't
support offload of non-UDP outer L4 checksums.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Martin Habets <mhabets@solarflare.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
By asking the HW for the correct edits, we can make UDP tunnel TSO
work without needing GSO_PARTIAL. So don't specify it in our
netdev->gso_partial_features.
However, retain GSO_PARTIAL support, as this will be used for other
protocols later.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Martin Habets <mhabets@solarflare.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
AIUI, the NETIF_F_TSO_MANGLEID flag is a signal to the stack that a
driver may _need_ to mangle IDs in order to do TSO, and conversely
a signal from the stack that the driver is permitted to do so.
Since we support both fixed and incrementing IPIDs, we should rely
on the SKB_GSO_FIXEDID flag on a per-skb basis, rather than using
the MANGLEID feature to make all TSOs fixed-id.
Includes other minor cleanups of ef100_make_tso_desc() coding style.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NIC only needs to know where the headers it has to edit (TCP and
inner and outer IPv4) are, which fits GSO_PARTIAL nicely.
It also supports non-PARTIAL offload of UDP tunnels, again just
needing to be told the outer transport offset so that it can edit
the UDP length field.
(It's not clear to me whether the stack will ever use the non-PARTIAL
version with the netdev feature flags we're setting here.)
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
efx_init_struct already calls this, we don't need to do it again.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_close(), by way of ef100_net_stop(), already brings down the filter
table, so there's no need to do it again (which just causes lots of
WARN_ONs).
Similarly, don't bring it up ourselves, as dev_open() -> ef100_net_open()
will do it, and will fail if it's already been brought up.
Fixes: a9dc3d5612 ("sfc_ef100: RX filter table management and related gubbins")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When downing and upping the ef100 filter table, we need to take a write
lock on efx->filter_sem, not just a read lock, because we may kfree()
the table pointers.
Without this, resets cause a WARN_ON from efx_rwsem_assert_write_locked().
Fixes: a9dc3d5612 ("sfc_ef100: RX filter table management and related gubbins")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Actually hook up the .rx_buf_hash_valid method in EF100's nic_type.
Fixes: 068885434c ("sfc: check hash is valid before using it")
Reported-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The handling of the RXQ/TXQ size granularity design-params had two
problems: it had a 64-bit divide that didn't build on 32-bit platforms,
and it could divide by zero if the NIC supplied 0 as the value of the
design-param. Fix both by checking for 0 and for a granularity bigger
than our min-size; if the granularity <= EFX_MIN_DMAQ_SIZE then it fits
in 32 bits, so we can cast it to u32 for the divide.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't yet have a .sriov_configure() to create them, though.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Self-tests for event and interrupt reception and NVRAM.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MAC stats work much the same as on EF10, with a periodic DMA to a region
specified via an MCDI.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bring down the TX and RX queues at ifdown, so that we can then fini the
EVQs (otherwise the MC would return EBUSY because they're still in use).
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Includes checksum offload and TSO, so declare those in our netdev features.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several parts of the EF100 architecture are parameterised (to allow
varying capabilities on FPGAs according to resource constraints), and
these parameters are exposed to the driver through a TLV-encoded
region of the BAR.
For the most part we either don't care about these values at all or
just need to sanity-check them against the driver's assumptions, but
there are a number of TSO limits which we record so that we will be
able to check against them in the TX path when handling GSO skbs.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the future, EF100 is planned to have a credit-based scheme for
handling unsolicited events, which drivers will need to use in order
to function correctly. However, current EF100 hardware does not yet
generate unsolicited events and the credit scheme has not yet been
implemented in firmware. To prevent compatibility problems later if
the current driver is used with future firmware which does implement
it, we check for the corresponding capability flag (which that
future firmware will set), and if found, we refuse to probe.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Early in EF100 development there was a different format of event
descriptor; if the NIC is somehow running the very old firmware
which will use that format, fail the probe.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ef100_reset(), make the MCDI call to do the reset.
Also, do a reset at start-of-day during probe, to put the function in
a clean state.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MC_CMD_GET_CAPABILITIES now has a third word of flags; extend the
efx_has_cap() machinery to cover it.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently RX and TX-completion events are unhandled, as neither the RX
nor the TX path has been implemented yet.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Channels are probed, but actual event handling is still stubbed out.
Stub implementation of check_caps is needed because ptp.c will call into
it from efx_ptp_use_mac_tx_timestamps() to decide if it wants TXQs.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can't actually do the MCDI to probe it fully until we have working
MCDI, which comes later, but we need efx->phy_data to be allocated so
that when we get MCDI events the link-state change handler doesn't
NULL-dereference.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't actually do the efx_mcdi_reset() because we don't have MCDI yet.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
