kvm_hypercall has to place the hypercall number in rax.
Trace events show that kvm_pv_test doesn't work properly:
kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0
kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0
kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0
With this change, it starts working as expected:
kvm_pv_test-54285: kvm_hypercall: nr 0x5 a0 0x0 a1 0x0 a2 0x0 a3 0x0
kvm_pv_test-54285: kvm_hypercall: nr 0xa a0 0x0 a1 0x0 a2 0x0 a3 0x0
kvm_pv_test-54285: kvm_hypercall: nr 0xb a0 0x0 a1 0x0 a2 0x0 a3 0x0
Signed-off-by: Andrei Vagin <avagin@google.com>
Message-Id: <20220722230241.1944655-5-avagin@google.com>
Fixes: ac4a4d6de2 ("selftests: kvm: test enforcement of paravirtual cpuid features")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
Use cpuid() to get CPUID.0x0 in cpu_vendor_string_is(), thus eliminating
the last open coded usage of CPUID (ignoring debug_regs.c, which emits
CPUID from the guest to trigger a VM-Exit and doesn't actually care about
the results of CPUID).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-42-seanjc@google.com
Provide informative error messages for the various checks related to
requesting access to XSAVE features that are buried behind XSAVE Feature
Disabling (XFD).
Opportunistically rename the helper to have "require" in the name so that
it's somewhat obvious that the helper may skip the test.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-41-seanjc@google.com
Skip the AMX test instead of silently returning if the host kernel
doesn't support ARCH_REQ_XCOMP_GUEST_PERM. KVM didn't support XFD until
v5.17, so it's extremely unlikely allowing the test to run on a pre-v5.15
kernel is the right thing to do.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-40-seanjc@google.com
Use kvm_cpu_has() to check for XFD supported in vm_xsave_req_perm(),
simply checking host CPUID doesn't guarantee KVM supports AMX/XFD.
Opportunistically hoist the check above the bit check; if XFD isn't
supported, it's far better to get a "not supported at all" message, as
opposed to a "feature X isn't supported" message".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-39-seanjc@google.com
Set the function/index for CPUID in the helper instead of relying on the
caller to do so. In addition to reducing the risk of consuming an
uninitialized ECX, having the function/index embedded in the call makes
it easier to understand what is being checked.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-32-seanjc@google.com
Tag the returned CPUID pointers from kvm_get_supported_cpuid(),
kvm_get_supported_hv_cpuid(), and vcpu_get_supported_hv_cpuid() "const"
to prevent reintroducing the broken pattern of modifying the static
"cpuid" variable used by kvm_get_supported_cpuid() to cache the results
of KVM_GET_SUPPORTED_CPUID.
Update downstream consumers as needed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-31-seanjc@google.com
Use the vCPU's persistent CPUID array directly when manipulating the set
of exposed Hyper-V CPUID features. Drop set_cpuid() to route all future
modification through the vCPU helpers; the Hyper-V features test was the
last user.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-27-seanjc@google.com
Add a new helper, vcpu_clear_cpuid_entry(), to do a RMW operation on the
vCPU's CPUID model to clear a given CPUID entry, and use it to clear
KVM's paravirt feature instead of operating on kvm_get_supported_cpuid()'s
static "cpuid" variable. This also eliminates a user of
the soon-be-defunct set_cpuid() helper.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-26-seanjc@google.com
Add a helper to set a vCPU's guest.MAXPHYADDR, and use it in the test
that verifies the emulator returns an error on an unknown instruction
when KVM emulates in response to an EPT violation with a GPA that is
legal in hardware but illegal with respect to the guest's MAXPHYADDR.
Add a helper even though there's only a single user at this time. Before
its removal, mmu_role_test also stuffed guest.MAXPHYADDR, and the helper
provides a small amount of clarity.
More importantly, this eliminates a set_cpuid() user and an instance of
modifying kvm_get_supported_cpuid()'s static "cpuid".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-25-seanjc@google.com
Use vm->pa_bits to generate the mask of physical address bits that are
reserved in page table entries. vm->pa_bits is set when the VM is
created, i.e. it's guaranteed to be valid when populating page tables.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-24-seanjc@google.com
Add helpers to get a specific CPUID entry for a given vCPU, and to toggle
a specific CPUID-based feature for a vCPU. The helpers will reduce the
amount of boilerplate code needed to tweak a vCPU's CPUID model, improve
code clarity, and most importantly move tests away from modifying the
static "cpuid" returned by kvm_get_supported_cpuid().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-23-seanjc@google.com
Rename get_cpuid() to get_cpuid_entry() to better reflect its behavior.
Leave set_cpuid() as is to avoid unnecessary churn, that helper will soon
be removed entirely.
Oppurtunistically tweak the implementation to avoid using a temporary
variable in anticipation of taggin the input @cpuid with "const".
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-21-seanjc@google.com
Don't use a static variable for the Hyper-V supported CPUID array, the
helper unconditionally reallocates the array on every invocation (and all
callers free the array immediately after use). The array is intentionally
recreated and refilled because the set of supported CPUID features is
dependent on vCPU state, e.g. whether or not eVMCS has been enabled.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-20-seanjc@google.com
Cache a vCPU's CPUID information in "struct kvm_vcpu" to allow fixing the
mess where tests, often unknowingly, modify the global/static "cpuid"
allocated by kvm_get_supported_cpuid().
Add vcpu_init_cpuid() to handle stuffing an entirely different CPUID
model, e.g. during vCPU creation or when switching to the Hyper-V enabled
CPUID model. Automatically refresh the cache on vcpu_set_cpuid() so that
any adjustments made by KVM are always reflected in the cache. Drop
vcpu_get_cpuid() entirely to force tests to use the cache, and to allow
adding e.g. vcpu_get_cpuid_entry() in the future without creating a
conflicting set of APIs where vcpu_get_cpuid() does KVM_GET_CPUID2, but
vcpu_get_cpuid_entry() does not.
Opportunistically convert the VMX nested state test and KVM PV test to
manipulating the vCPU's CPUID (because it's easy), but use
vcpu_init_cpuid() for the Hyper-V features test and "emulator error" test
to effectively retain their current behavior as they're less trivial to
convert.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-19-seanjc@google.com
Split out the computation of the effective size of a kvm_cpuid2 struct
from allocate_kvm_cpuid2(), and modify both to take an arbitrary number
of entries. Future commits will add caching of a vCPU's CPUID model, and
will (a) be able to precisely size the entries array, and (b) will need
to know the effective size of the struct in order to copy to/from the
cache.
Expose the helpers so that the Hyper-V Features test can use them in the
(somewhat distant) future. The Hyper-V test very, very subtly relies on
propagating CPUID info across vCPU instances, and will need to make a
copy of the previous vCPU's CPUID information when it switches to using
the per-vCPU cache. Alternatively, KVM could provide helpers to
duplicate and/or copy a kvm_cpuid2 instance, but each is literally a
single line of code if the helpers are exposed, and it's not like the
size of kvm_cpuid2 is secret knowledge.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-18-seanjc@google.com
Use kvm_cpu_has() to check for nested VMX support, and drop the helpers
now that their functionality is trivial to implement.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-7-seanjc@google.com
Use kvm_cpu_has() to check for nested SVM support, and drop the helpers
now that their functionality is trivial to implement.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-6-seanjc@google.com
Add X86_FEATURE_* magic in the style of KVM-Unit-Tests' implementation,
where the CPUID function, index, output register, and output bit position
are embedded in the macro value. Add kvm_cpu_has() to query KVM's
supported CPUID and use it set_sregs_test, which is the most prolific
user of manual feature querying.
Opportunstically rename calc_cr4_feature_bits() to
calc_supported_cr4_feature_bits() to better capture how the CR4 bits are
chosen.
Link: https://lore.kernel.org/all/20210422005626.564163-1-ricarkol@google.com
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-4-seanjc@google.com
On x86-64, set KVM's supported CPUID as the vCPU's CPUID when recreating
a VM+vCPU to deduplicate code for state save/restore tests, and to
provide symmetry of sorts with respect to vm_create_with_one_vcpu(). The
extra KVM_SET_CPUID2 call is wasteful for Hyper-V, but ultimately is
nothing more than an expensive nop, and overriding the vCPU's CPUID with
the Hyper-V CPUID information is the only known scenario where a state
save/restore test wouldn't need/want the default CPUID.
Opportunistically use __weak for the default vm_compute_max_gfn(), it's
provided by tools' compiler.h.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-2-seanjc@google.com
In order to improve performance across multiple reads of VM stats, cache
the stats metadata in the VM struct.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-11-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's currently no test coverage of NX hugepages in KVM selftests, so
add a basic test to ensure that the feature works as intended.
The test creates a VM with a data slot backed with huge pages. The
memory in the data slot is filled with op-codes for the return
instruction. The guest then executes a series of accesses on the memory,
some reads, some instruction fetches. After each operation, the guest
exits and the test performs some checks on the backing page counts to
ensure that NX page splitting an reclaim work as expected.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-7-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the code to read the binary stats data to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
Also opportunistically remove an unnecessary calculation with
"size_data" in stats_test.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the code to read the binary stats descriptors to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The selftests, when built with newer versions of clang, is found
to have over optimized guests' ucall() function, and eliminating
the stores for uc.cmd (perhaps due to no immediate readers). This
resulted in the userspace side always reading a value of '0', and
causing multiple test failures.
As a result, prevent the compiler from optimizing the stores in
ucall() with WRITE_ONCE().
Suggested-by: Ricardo Koller <ricarkol@google.com>
Suggested-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Message-Id: <20220615185706.1099208-1-rananta@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add x86-64 support for exception fixup on single instructions, without
forcing tests to install their own fault handlers. Use registers r9-r11
to flag the instruction as "safe" and pass fixup/vector information,
i.e. introduce yet another flavor of fixup (versus the kernel's in-memory
tables and KUT's per-CPU area) to take advantage of KVM sefltests being
64-bit only.
Using only registers avoids the need to allocate fixup tables, ensure
FS or GS base is valid for the guest, ensure memory is mapped into the
guest, etc..., and also reduces the potential for recursive faults due to
accessing memory.
Providing exception fixup trivializes tests that just want to verify that
an instruction faults, e.g. no need to track start/end using global
labels, no need to install a dedicated handler, etc...
Deliberately do not support #DE in exception fixup so that the fixup glue
doesn't need to account for a fault with vector == 0, i.e. the vector can
also indicate that a fault occurred. KVM injects #DE only for esoteric
emulation scenarios, i.e. there's very, very little value in testing #DE.
Force any test that wants to generate #DEs to install its own handler(s).
Use kvm_pv_test as a guinea pig for the new fixup, as it has a very
straightforward use case of wanting to verify that RDMSR and WRMSR fault.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220608224516.3788274-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are some parameter being removed in function but the parameter
comments still exist, so remove them.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Message-Id: <20220614224126.211054-1-shaoqin.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace calls to kvm_check_cap() that treat its return as a boolean with
calls to kvm_has_cap(). Several instances of kvm_check_cap() were missed
when kvm_has_cap() was introduced.
Reported-by: Andrew Jones <drjones@redhat.com>
Fixes: 3ea9b80965 ("KVM: selftests: Add kvm_has_cap() to provide syntactic sugar")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613161942.1586791-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a duplicate TEST_ASSERT() on the number of runnable vCPUs in
vm_nr_pages_required() that snuck in during a rebase gone bad.
Reported-by: Andrew Jones <drjones@redhat.com>
Fixes: 6e1d13bf38 ("KVM: selftests: Move per-VM/per-vCPU nr pages calculation to __vm_create()")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613161942.1586791-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an apostrophe in a comment about it being the caller's, not callers,
responsibility to free an object.
Reported-by: Andrew Jones <drjones@redhat.com>
Fixes: 768e9a6185 ("KVM: selftests: Purge vm+vcpu_id == vcpu silliness")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220613161942.1586791-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a static assert to the KVM/VM/vCPU ioctl() helpers to verify that the
size of the argument provided matches the expected size of the IOCTL.
Because ioctl() ultimately takes a "void *", it's all too easy to pass in
garbage and not detect the error until runtime. E.g. while working on a
CPUID rework, selftests happily compiled when vcpu_set_cpuid()
unintentionally passed the cpuid() function as the parameter to ioctl()
(a local "cpuid" parameter was removed, but its use was not replaced with
"vcpu->cpuid" as intended).
Tweak a variety of benign issues that aren't compatible with the sanity
check, e.g. passing a non-pointer for ioctls().
Note, static_assert() requires a string on older versions of GCC. Feed
it an empty string to make the compiler happy.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add TEST_REQUIRE() and __TEST_REQUIRE() to replace the myriad open coded
instances of selftests exiting with KSFT_SKIP after printing an
informational message. In addition to reducing the amount of boilerplate
code in selftests, the UPPERCASE macro names make it easier to visually
identify a test's requirements.
Convert usage that erroneously uses something other than print_skip()
and/or "exits" with '0' or some other non-KSFT_SKIP value.
Intentionally drop a kvm_vm_free() in aarch64/debug-exceptions.c as part
of the conversion. All memory and file descriptors are freed on process
exit, so the explicit free is superfluous.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kvm_has_cap() to wrap kvm_check_cap() and return a bool for the use
cases where the caller only wants check if a capability is supported,
i.e. doesn't care about the value beyond whether or not it's non-zero.
The "check" terminology is somewhat ambiguous as the non-boolean return
suggests that '0' might mean "success", i.e. suggests that the ioctl uses
the 0/-errno pattern. Provide a wrapper instead of trying to find a new
name for the raw helper; the "check" terminology is derived from the name
of the ioctl, so using e.g. "get" isn't a clear win.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return an 'unsigned int' instead of a signed 'int' from kvm_check_cap(),
to make it more obvious that kvm_check_cap() can never return a negative
value due to its assertion that the return is ">= 0".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove DEFAULT_GUEST_PHY_PAGES and open code the magic number (with a
comment) in vm_nr_pages_required(). Exposing DEFAULT_GUEST_PHY_PAGES to
tests was a symptom of the VM creation APIs not cleanly supporting tests
that create runnable vCPUs, but can't do so immediately. Now that tests
don't have to manually compute the amount of memory needed for basic
operation, make it harder for tests to do things that should be handled
by the framework, i.e. force developers to improve the framework instead
of hacking around flaws in individual tests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle all memslot0 size adjustments in __vm_create(). Currently, the
adjustments reside in __vm_create_with_vcpus(), which means tests that
call vm_create() or __vm_create() directly are left to their own devices.
Some tests just pass DEFAULT_GUEST_PHY_PAGES and don't bother with any
adjustments, while others mimic the per-vCPU calculations.
For vm_create(), and thus __vm_create(), take the number of vCPUs that
will be runnable to calculate that number of per-vCPU pages needed for
memslot0. To give readers a hint that neither vm_create() nor
__vm_create() create vCPUs, name the parameter @nr_runnable_vcpus instead
of @nr_vcpus. That also gives readers a hint as to why tests that create
larger numbers of vCPUs but never actually run those vCPUs can skip
straight to the vm_create_barebones() variant.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop @num_percpu_pages from __vm_create_with_vcpus(), all callers pass
'0' and there's unlikely to be a test that allocates just enough memory
that it needs a per-CPU allocation, but not so much that it won't just do
its own memory management.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All callers of __vm_create_with_vcpus() pass DEFAULT_GUEST_PHY_PAGES for
@slot_mem_pages; drop the param and just hardcode the "default" as the
base number of pages for slot0.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop a variety of 'struct kvm_vm' accessors that wrap a single variable
now that tests can simply reference the variable directly.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop vcpu_state() now that all tests reference vcpu->run directly.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop vcpu_get() and rename vcpu_find() to vcpu_exists() to make it that
much harder for a test to give meaning to a vCPU ID. I.e. force tests to
capture a vCPU when the vCPU is created.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take a vCPU directly instead of a VM+vcpu pair in all vCPU-scoped helpers
and ioctls.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Require the caller of __vm_create_with_vcpus() to provide a non-NULL
array of vCPUs now that all callers do so. It's extremely unlikely a
test will have a legitimate use case for creating a VM with vCPUs without
wanting to do something with those vCPUs, and if there is such a use case,
requiring that one-off test to provide a dummy array is a minor
annoyance.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track vCPUs by their 'struct kvm_vcpu' object, and stop assuming that a
vCPU's ID is the same as its index when referencing a vCPU's metadata.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the @vcpuids parameter from VM creators now that there are no users.
Allowing tests to specify IDs was a gigantic mistake as it resulted in
tests with arbitrary and ultimately meaningless IDs that differed only
because the author used test X intead of test Y as the source for
copy+paste (the de facto standard way to create a KVM selftest).
Except for literally two tests, x86's set_boot_cpu_id and s390's resets,
tests do not and should not care about the vCPU ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop all vm_create_default*() helpers, the "default" naming turned out to
terrible as wasn't extensible (hard to have multiple defaults), was a lie
(half the settings were default, half weren't), and failed to capture
relationships between helpers, e.g. compared with the kernel's standard
underscores pattern.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert diag318_test_handler to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of passing around vCPU IDs. Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==6. The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage. If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
