pcim_ioumap_region() has recently been made a public function and does
not have the disadvantage of having to deal with the legacy iomap table,
as pcim_iounmap_regions() does.
Deprecate pcim_iounmap_regions().
Link: https://lore.kernel.org/r/20241016094911.24818-4-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The function pcim_iounmap_regions() is problematic because it uses a
bitmask mechanism to release / iounmap multiple BARs at once. It, thus,
prevents getting rid of the problematic iomap table mechanism which was
deprecated in commit e354bb84a4 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()").
pcim_iounmap_region() does not have that problem. Make it public as the
successor of pcim_iounmap_regions().
Link: https://lore.kernel.org/r/20241016094911.24818-3-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
pcim_iomap_regions_request_all() have been deprecated in
commit e354bb84a4 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()").
All users of this function have been ported to other interfaces by now.
Remove pcim_iomap_regions_request_all().
Link: https://lore.kernel.org/r/20241030112743.104395-11-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
In order to remove the deprecated function
pcim_iomap_regions_request_all(), a few drivers need an interface to
request all BARs a PCI device offers.
Make pcim_request_all_regions() a public interface.
Link: https://lore.kernel.org/r/20241030112743.104395-2-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=L3s9
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean
Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...
25216afc9d ("PCI: Add managed pcim_intx()") moved the allocation step for
pci_intx()'s device resource from pcim_enable_device() to pcim_intx(). As
before, pcim_enable_device() sets pci_dev.is_managed to true; and it is
never set to false again.
Due to the lifecycle of a struct pci_dev, it can happen that a second
driver obtains the same pci_dev after a first driver ran. If one driver
uses pcim_enable_device() and the other doesn't, this causes the other
driver to run into managed pcim_intx(), which will try to allocate when
called for the first time.
Allocations might sleep, so calling pci_intx() while holding spinlocks
becomes then invalid, which causes lockdep warnings and could cause
deadlocks:
========================================================
WARNING: possible irq lock inversion dependency detected
6.11.0-rc6+ #59 Tainted: G W
--------------------------------------------------------
CPU 0/KVM/1537 just changed the state of lock:
ffffa0f0cff965f0 (&vdev->irqlock){-...}-{2:2}, at:
vfio_intx_handler+0x21/0xd0 [vfio_pci_core] but this lock took another,
HARDIRQ-unsafe lock in the past: (fs_reclaim){+.+.}-{0:0}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
local_irq_disable();
lock(&vdev->irqlock);
lock(fs_reclaim);
<Interrupt>
lock(&vdev->irqlock);
*** DEADLOCK ***
Have pcim_enable_device()'s release function, pcim_disable_device(), set
pci_dev.is_managed to false so that subsequent drivers using the same
struct pci_dev do not implicitly run into managed code.
Link: https://lore.kernel.org/r/20240905072556.11375-2-pstanner@redhat.com
Fixes: 25216afc9d ("PCI: Add managed pcim_intx()")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Closes: https://lore.kernel.org/all/20240903094431.63551744.alex.williamson@redhat.com/
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
pcim_iomap_regions() is a complicated function that uses a bit mask to
determine the BARs the user wishes to request and ioremap. Almost all users
only ever set a single bit in that mask, making that mechanism
questionable.
pcim_iomap_region() is now available as a more simple replacement.
Make pcim_iomap_region() a public function.
Mark pcim_iomap_regions() as deprecated.
Link: https://lore.kernel.org/r/20240807083018.8734-2-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
pcim_request_region() is the managed counterpart of pci_request_region().
It is currently only used internally for PCI.
It can be useful for a number of drivers and exporting it is a step towards
deprecating more complicated functions.
Make pcim_request_region() a public function.
Link: https://lore.kernel.org/r/20240729093625.17561-4-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
The only managed mapping function currently is pcim_iomap() which doesn't
allow for mapping an area starting at a certain offset, which many drivers
want.
Add pcim_iomap_range() as an exported function.
Link: https://lore.kernel.org/r/20240613115032.29098-13-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Thanks to preceding cleanup steps, pcim_release() is now not needed
anymore and can be replaced by pcim_disable_device(), which is the exact
counterpart to pcim_enable_device().
This permits removing further parts of the old PCI devres implementation.
Replace pcim_release() with pcim_disable_device(). Remove the now unused
function get_pci_dr(). Remove the struct pci_devres from pci.h.
Link: https://lore.kernel.org/r/20240613115032.29098-12-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Managing pci_set_mwi() with devres can easily be done with its own
callback, without the necessity to store any state about it in a
device-related struct.
Remove the MWI state from struct pci_devres. Give pcim_set_mwi() a
separate devres cleanup callback.
Link: https://lore.kernel.org/r/20240613115032.29098-10-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The bit describing whether the PCI device is currently pinned is stored
in struct pci_devres. To clean up and simplify the PCI devres API, it's
better if this information is stored in struct pci_dev.
This will later permit simplifying pcim_enable_device().
Move the 'pinned' boolean bit to struct pci_dev.
Restructure bits in struct pci_dev so the pm / pme fields are next to
each other.
Link: https://lore.kernel.org/r/20240613115032.29098-9-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The struct pci_devres has a separate boolean to track whether a device is
enabled. That, however, can easily be tracked in an agnostic manner through
the function pci_is_enabled().
Using it allows for simplifying the PCI devres implementation.
Replace the separate 'enabled' status bit from struct pci_devres with
calls to pci_is_enabled() at the appropriate places.
Link: https://lore.kernel.org/r/20240613115032.29098-8-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
These existing functions:
pci_request_region()
pci_request_selected_regions()
pci_request_selected_regions_exclusive()
are "hybrid" functions built on __pci_request_region() and are managed if
pcim_enable_device() has been called, but unmanaged otherwise.
Add these new functions:
pcim_request_region()
pcim_request_region_exclusive()
These are *always* managed and use the new pcim_addr_devres tracking
infrastructure instead of find_pci_dr() and struct pci_devres.region_mask.
Implement the hybrid functions using the new "pure" functions and remove
struct pci_devres.region_mask, which is no longer needed.
Link: https://lore.kernel.org/r/20240613115032.29098-6-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Deprecate pcim_iomap_table(). It returns a pointer to a table of
ioremapped BARs, or NULL if it fails. This makes uses like this:
addr = pcim_iomap_table(pdev)[0];
problematic because it causes a NULL pointer dereference on failure.
Callers should use pcim_iomap() instead.
Deprecate pcim_iomap_regions_request_all() because it is built on
__pci_request_region() and is managed if pcim_enable_device() has been
called, but unmanaged otherwise, which is prone to errors.
Callers should either use pcim_iomap_regions() to request and map BARs, or
use pcim_request_region() followed by pcim_iomap().
Link: https://lore.kernel.org/r/20240613115032.29098-5-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log, sphinx markup]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The pcim_iomap_devres table tracks entire-BAR mappings, so we can't use it
to build a managed version of pci_iomap_range(), which maps partial BARs.
Add struct pcim_addr_devres, which can track request and mapping of both
entire BARs and partial BARs.
Add the following internal devres functions based on struct
pcim_addr_devres:
pcim_iomap_region() # request & map entire BAR
pcim_iounmap_region() # unmap & release entire BAR
pcim_request_region() # request entire BAR
pcim_release_region() # release entire BAR
pcim_request_all_regions() # request all entire BARs
pcim_release_all_regions() # release all entire BARs
Rework the following public interfaces using the new infrastructure
listed above:
pcim_iomap() # map partial BAR
pcim_iounmap() # unmap partial BAR
pcim_iomap_regions() # request & map specified BARs
pcim_iomap_regions_request_all() # request all BARs, map specified BARs
pcim_iounmap_regions() # unmap & release specified BARs
Link: https://lore.kernel.org/r/20240613115032.29098-4-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The pcim_iomap_devres.table administrated by pcim_iomap_table() has its
entries set and unset at several places throughout devres.c using manual
iterations which are effectively code duplications.
Add pcim_add_mapping_to_legacy_table() and
pcim_remove_mapping_from_legacy_table() helper functions and use them where
possible.
Link: https://lore.kernel.org/r/20240613115032.29098-3-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The current devres implementation uses manual shift operations to check
whether a bit in a mask is set. The code can be made more readable by
writing a small helper function for that.
Implement mask_contains_bar() and use it where applicable.
Link: https://lore.kernel.org/r/20240613115032.29098-2-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The file pci.c is very large and contains a number of devres functions.
These functions should now reside in devres.c.
Move as much devres-specific code from pci.c to devres.c as possible.
There are a few callers left in pci.c that do devres operations. These
should be ported in the future. Add corresponding TODOs.
The reason they are not moved right now in this commit is that PCI's devres
currently implements a sort of "hybrid-mode": pci_request_region(), for
instance, does not have a corresponding pcim_ equivalent, yet. Instead, the
function can be made managed by previously calling pcim_enable_device()
(instead of pci_enable_device()). This makes it unreasonable to move
pci_request_region() to devres.c. Moving the functions would require
changes to PCI's API and is, therefore, left for future work.
In summary, this commit serves as a preparation step for a following
patch series that will cleanly separate the PCI's managed and unmanaged
API.
Link: https://lore.kernel.org/r/20240131090023.12331-5-pstanner@redhat.com
Suggested-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The pcim_*() functions in lib/devres.c are guarded by an #ifdef CONFIG_PCI
and, thus, don't belong to this file. They are only ever used for PCI and
are not generic infrastructure.
Move all pcim_*() functions in lib/devres.c to drivers/pci/devres.c.
Adjust the Makefile.
Add drivers/pci/devres.c to Documentation.
Link: https://lore.kernel.org/r/20240131090023.12331-4-pstanner@redhat.com
Suggested-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
